power plant operator

ACWA Power

A leading energy provider in Abu Dhabi is seeking a Field Operator responsible for the operation and monitoring of equipment, ensuring safety compliance and efficient plant performance. Candidates should have a high school diploma or a technical certificate and possess 3-5 years of operational experience in power plants. This role emphasizes critical thinking, teamwork, and adherence to health and safety procedures.

Power Plant Field Operator - O&M & Start-up

Marafiq - CUC

<div>
 
 
 ROLE PURPOSE
 
 
 
 To carry out all Power and Water plant field related activities (hands-on or supervisory) within area of concern in a safe and reliable manner that will ensure Marafiq meeting its contractual commitments.
 
 
 
 
 
 
 ACCOUNTABILITIES AND RESPONSIBILITIES
 
 
 
 
 
 
 
 1-Conducting Rounds
 
 
 
 Conducts routine plant checks and take periodical rounds in area of concern to monitor the technical condition and evaluates performance of the Power and Water Plant equipment.
 
 
 
 
 
 
 2- Taking Readings
 
 
 
 Take readings on a daily basis from the field installed instrumentation and compare the readings from the field with the ones from Distributed Control System (DCS) to have a clear idea of Plant condition.
 
 
 
 
 
 
 3- Report Writing &amp; Reporting Concerns
 
 
 <ul>
 <li>
 Monitoring and logging all critical parameters such as lube oil levels, temps, pressures and equipment status daily.
 </li>
 <li>
 Raise concerns about related discrepancies to the line management following the comparison and analysis of the readings, and whenever a defect is observed.
 </li>
 <li>
 Report any unsafe act/environmental incident occurred in own area of work.
 </li>
 <li>
 Compile comprehensive reports whenever requested by the supervisory line and keep records of the reports.
 </li>
 </ul>
 
 
 
 
 
 4- Safety Adherence
 
 
 <ul>
 <li>
 Be responsible for safely isolating the equipment, installing/removing LOTO devices, etc.
 </li>
 <li>
 Reporting Incidents and Near Miss and perform safety walkdown as per the KPI&rsquo;s.
 </li>
 </ul>
 
 
 
 
 
 5- Coordination &amp; Efficient Interaction
 
 
 <ul>
 <li>
 Having good experience in Combined cycle Power plant (Gas turbines, HRSG, Steam turbines, BOP) and Reverse Osmosis Water plant field operations.
 </li>
 <li>
 Ensuring that all maintenance works in the plant strictly follow the PTW system in place.
 </li>
 <li>
 As a authorized operations person, Implementing isolations and normalizations (LOTO) as per the approved PTW procedures.
 </li>
 <li>
 Perform operational actions under direction from the BO (i.e. Valve operations, Isolation of breakers, switching on/ off pumps or resetting the local alarms etc) to avoid any abnormal plant operations or to correct existing abnormalities. Inspecting all MV and LV SWGR&rsquo;s for any abnormalities.
 </li>
 <li>
 Prepare plant for start-ups in accordance with approved Pre-start check list and approved operations procedure.
 </li>
 <li>
 Performs plant shut down and extended shut down, preservation of plant routines in accordance with approved operations procedure. Perform manual intervention actions during trip conditions and maintain close supervision to ensure safe shutdown and restoration of the plant.
 </li>
 <li>
 Interface with the Maintenance team for any maintenance activity in area of work.
 </li>
 <li>
 Coordinate efficiently with and follow up on any contractor regarding inspections and turnarounds.
 </li>
 <li>
 Support Board operator during emergency situation.
 </li>
 <li>
 Carry out the sample analysis of the plant process steam water cycle in cases where chemist is not on-site and on HRSG, Demin water, Desal, portable water and other samples.
 </li>
 <li>
 Perform routine site inspections, update plant equipment status, identify the abnormalities and report the Work notifications to maintenance through CMMS.
 </li>
 <li>
 Daily communication of plant operational issues and defects with the BO, SS and other team members.
 </li>
 <li>
 Responsible for Chemical tankers unloading and changing over of chemical tanks. Perform the Chemical Unloading checklist.
 </li>
 </ul>
 
 
 
 
 
 6- Handover to Next Shift
 
 
 
 Ensure the appropriate and timely hand-over of all information, activities, and reports to the upcoming shift&rsquo;s team.
 
 
 
 
 
 
 7-Providing Guidance &amp; Assistance
 
 
 
 Provide guidance to new joiners and trainees in performing their duties during the on-job training program.
 
 
 
 
 
 
 8- Housekeeping of Area of Work
 
 
 
 Be responsible for the proper housekeeping of Power and Water plant.
 
 
 
 
 
 
 9- Policies &amp; Procedures
 
 
 
 Comply with the implementation of departmental policies and procedures, to ensure that all relevant procedural and legislative requirements are fulfilled.
 
 
 
 
 
 
 10- Health, Safety &amp; Quality
 
 
 <ul>
 <li>
 Comply with all relevant health, safety and quality requirements, in order to guarantee employee safety and legislative compliance.
 </li>
 <li>
 Practical application of safety rules performing safe plant isolations from the system to allow routine maintenance activities. De-isolates and restores plant equipment safely to the system.
 </li>
 </ul>
 
 
 
 
 
 11- Continuous Improvement
 
 
 
 Contribute to the identification of opportunities for continuous improvement of systems, processes and practices taking into consideration &lsquo;leading best practices&rsquo;, improvement of business processes, cost reduction and productivity improvement.
 
 
 
 
 
 
 COMMUNICATION CHANNELS
 
 
 
 
 
 
 
 Internal
 
 
 <ul>
 <li>
 Shift Supervisors
 </li>
 <li>
 Board Operators
 </li>
 <li>
 Maintenance Team
 </li>
 <li>
 Operations Team
 </li>
 </ul>
 
 
 
 
 
 External
 
 
 <ul>
 <li>
 Contractors
 </li>
 <li>
 Clients
 </li>
 </ul>
 
 
 
 
 
 Educational &amp; Professional Qualifications and Experience
 
 
 
 
 Minimum Qualifications:
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Engineering or Diploma (Mechanical, Electrical, Process) from a recognized University.
 </li>
 <li>
 Proficiency in English is a must, Arabic is a plus.
 </li>
 </ul>
 
 
 Minimum Experience:
 
 
 <ul>
 <li>
 3 to 5 years of direct and relevant experience in a similar environment.
 </li>
 <li>
 Extensive experience related to Combined cycle Power plant and Reverse Osmosis Desalination processes.
 </li>
 <li>
 Competent technical, operational and HSE experience to oversee the effective implementation and execution of the Operation activities
 </li>
 </ul>
 
 
 
 
 
 Skills and Competencies
 
 
 <ul>
 <li>
 
 Generic Skills:
 
 Communication skills, CMMS, Computer literacy (ERP), Microsoft tool (Excel, PowerPoint, Visio, Word)
 </li>
 <li>
 
 Job Specific Skills:
 
 Efficiency in Record Keeping &amp; Reporting, Detail-oriented, Interpersonal skills, Cooperation, Initiator, Ability to work well under pressure, Knowledge of laws, rules, regulations, and environmental requirements applicable to the operation and maintenance of power and water plants.
 </li>
 <li>
 
 Behavioral Competencies:
 
 People Centricity, Integrity, Agility, Collaboration.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 *Only candidates selected to advance to the next stages of the assessment will be contacted*
 
 
</div>

Field Operator

Overview Coal and Ash Desk Operator is responsible for all control room and field operations of Jetty, Coal Plant and Ash Plant. Supervise, control and coordinate jetty, coal plant and ash plant shift operational activities to ensure timely coal supply to the power plant and effective ash evacuation from the power plant in accordance with established schedules, quality, cost and time objectives. Responsible for safe start-up/shut down of the plant as per the Standard Operating Procedures. PTW system <ul><li>Follow safety guidelines including PTW system.</li><li>Creation of defect notification and follow up for rectification of defects</li></ul> Operation <ul><li>Operation of jetty system, coal handling plants, ash handling plant with optimum efficiency.</li><li>Safe start-up, Safe operation and safe shutdown of coal and ash handling plants.</li><li>Line up of coal and ash plants and its auxiliaries, changeover of equipment, routine testing of protection system and annunciation system.</li><li>Monitor Coal and ash plant operations and handle emergencies including shut-down of units and control coal supply as per requirement.</li><li>Instruction to field operators for safe operation of coal and ash plants</li></ul> Co-ordinate with load despatch <ul><li>Monitor the coal belts loading, bunkering activity on continuous basis to supply uninterrupted coal to power plant</li></ul> Emergency Equipment <ul><li>Emergency Equipment Trial and restoration of process.</li><li>Carry out off scheduled trial run of critical equipment and tests</li></ul> Availability & efficiency <ul><li>Run the plant at maximum capacity and efficiency.</li><li>Belts utilization to be optimized.</li><li>Keep all auxiliaries available and in operating condition to get maximum availability</li><li>Follow best practice</li><li>Check defects and raise notifications in SAP.</li><li>Handle different emergencies in a coal and ash plants.</li><li>Manpower Management and control jetty system, Coal plant and ash plant operations</li></ul> Analysis <ul><li>Equipment Outage Analysis and troubleshooting</li><li>Reduction in Aux power consumption, service water consumption & prevention leakages</li><li>Monitor operating parameters and maintain at its best</li></ul> Health, Safety, Security & Environment <ul><li>Adhere to all relevant health, safety, security and environmental procedures, instructions and controls so that the safety of employees and environmental compliance can be guaranteed</li></ul> Minimum Qualifications <ul><li>Three-year Regular Diploma or equivalent</li><li>5 - 7 years in Coal Fired Power plant operations specifically in coal plant (>1200 TPH) and ash handling (>300 MW), ideally with jetty fuel delivery experience.</li></ul> Skills <ul><li>Interpersonal</li><li>Ability to work under pressure</li><li>Familiarity and experience of SAP</li></ul>

Coal/Ash Desk Operator - I

Khalidiya Palace Rayhaan by Rotana

<div>
 
 Job Description
 
 
 
 We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.
 
 
 As a BMS Operator you are responsible to supervise and control the operation of the building management system and monitor all plant activities of the headquarters building services, whereby your role will include key responsibilities such as-
 
 
 <ul>
 <li>
 Provide the maintenance supervisor with planned preventive maintenance (PPM) schedules for implementation and handle the follow up on the same
 </li>
 <li>
 Analyze the behavior of the plants with respect to the set point and setting up the various control parameters
 </li>
 <li>
 Perform daily auditing of plant performance by utilizing the facilities built on the building management system (BMS) e.g. data logging, plant review, alarm manager status, etc.
 </li>
 <li>
 Analyze reasons of failure of plants and provides specific diagnostic, problem analysis and specify the necessary remedial actions for Supervisor&rsquo;s approval
 </li>
 <li>
 Use the historical logged data of various plants to review the system and propose improvements in order to enhance the system efficiency and / or reduce the operation cost as well as improve the services provided to customer
 </li>
 <li>
 Program the BMS and PPM system and other plants (e.g. standby power generator, diesel driven fire fighting pump, fire alarm system, etc.) for automatic periodic testing
 
 
 </li>
 </ul>
 
 Skills
 
 
 
 
 Education, Qualifications &amp; Experiences
 
 
 
 You should ideally have a degree in BMS mechanical engineering with previous experiences in the same role and a proven knowledge in the operation and maintenance of the equipment. A good command of English and the ability to find fault and rectify subsystems are essentials.
 
 
 
 Knowledge &amp; Competencies
 
 
 
 The ideal candidate will be self motivated with a hands-on and flexible approach and be able to adapt to unpredictable events. You are pro-active and reliable and will thrive through working in a busy environment and stay calm under pressure, have attention to details and should possess following competencies-
 
 
 Adaptability
 
 
 Customer Focus
 
 
 Recognising Differences
 
 
 Taking Responsibility
 
 
 Teamwork
 
 
 Understanding the job
</div>

BMS Operator

Farnek Services LLC

BMS Operator is responsible to supervise and control the operation of the Building Management System and monitor all plant activities.The BMS Operator's key role is to monitor the Building Management System for any alarms or abnormalities and proactively coordinate with the respective ground team to mitigate or overcome the risk, with excellent troubleshooting skills. They must have:<ul><li>In-depth knowledge of MEP systems and their functionality.</li><li>Familiarity in navigating all the Building Management System supplied by various vendors such as Honeywell, Siemens, Schnieder, Sauter, etc.</li><li>Analyze the behavior of the plants with respect to the set point and setting up the various control parameters.</li><li>Awareness of MEP system sequence of operation, standard operating procedures.</li><li>Mindfulness of building fire cause & effect interface with MEP system.</li><li>Perform daily auditing of plant performance by utilizing the facilities built on the building management system (BMS) e.g., data logging, plant review, alarm manager status, etc.</li><li>Analyze reasons of failure of plants and provide specific diagnostic, problem analysis, and specify the necessary remedial actions for Supervisors' approval.</li><li>Use the historical logged data of various plants to review the system and propose improvements in order to enhance the system efficiency and/or reduce the operation cost as well as improve the services provided to customers.</li><li>Excellent troubleshooting skills.</li><li>A keen eye for detail.</li></ul>Requirements:<ul><li>Previous experience working as a BMS Operator.</li><li>In-depth knowledge of MEP Systems.</li><li>Familiarity with computers and IP Networking Systems.</li><li>Self-motivated with a hands-on and flexible approach and be able to adapt to unpredictable events.</li><li>Pro-active and reliable and will thrive through working in a busy environment and stay calm under pressure, have attention to details.</li><li>Excellent troubleshooting skills.</li><li>A keen eye for detail.</li><li>Good communication and interpersonal skills.</li><li>Flexibility to work long shifts and overnight.</li></ul>Education and Experience:<ul><li>Bachelor's degree / 3 years Diploma Holder in Electrical or Mechanical Engineering with experience in BMS application.</li><li>BMS operator role for a tenure of 5 years.</li><li>Hospitality experience for a minimal tenure of 3 years in more than a 3-star rated hotel.</li></ul> Required Skills: Analysis, Management System, Mechanical Engineering, Auditing, Interpersonal Skills, Networking, Troubleshooting, Vendors, Pressure Engineering, Communication, Management.

Larsen & Toubro

<div>
 
 Experience
 
 
 
 Min. 3 years /5 years for BE/Diploma holder having exp in Solar Operation &amp; Maintenance (at least should have handled single plant capacity of 20 MW solar power plant, experience in electrical equipment testing and commissioning is preferred
 
 
 
 Roles &amp; Responsibility
 
 
 
 <ul>
 <li>
 Daily monitoring the functions of all electrical equipment&rsquo;s.
 </li>
 <li>
 Carrying out PM and maintaining record
 </li>
 <li>
 Attending Breakdown
 </li>
 <li>
 Managing site team (Engr/Technicians)
 </li>
 <li>
 Preparing Maintenance report
 </li>
 <li>
 Plant SCADA monitoring through SCADA and taking corrective actions
 </li>
 <li>
 Guiding Module cleaning Team
 </li>
 <li>
 Guiding Vegetation control team
 </li>
 <li>
 Good knowledge about maintenance SOP &ndash; equipment wise
 </li>
 <li>
 Monitoring and co-ordination of Electrical testing team
 </li>
 <li>
 All reports to be maintain as per site requirement.
 </li>
 <li>
 Adhering organization Quality system
 </li>
 <li>
 Adhering to organization EHS system
 </li>
 <li>
 Adherence to O&amp;M manual requirements
 </li>
 <li>
 Work under Site in-charge
 </li>
 <li>
 Good knowledge about plant EHS practise, LOTO, PTW
 </li>
 </ul>
</div>

Site Engineer - O&M- SOLAR - KHAVADA

Aditya Birla Group

<div>
 
 Job Purpose
 
 
 
 <ul>
 <li>
 To coordinate with OEM &amp; O&amp;M contractor and Connected Grid S/S on day-to-day operational activities for Solar power plant.
 </li>
 <li>
 To ensure safe work permits for any preventative or breakdown maintenance at site.
 </li>
 <li>
 To analysis plant performance on Daily basis for improvement of performance.
 </li>
 <li>
 To achieve the sustainability score of legal, safety and statutory compliances
 </li>
 <li>
 To coordinate the monthly JMR signing, ensuring proper coordination with state Discom and other compliances
 </li>
 <li>
 Conduct testing work towards operational efficiency of Solar plant
 </li>
 <li>
 Managing plant 5s&rsquo; and material management.
 </li>
 <li>
 Handled local people issues during transmission line maintenance work.
 </li>
 </ul>
</div>

Site Incharge O&M (Solar) - Jadi, GJ - AM

Search 7002+ Power plant operator jobs near you this January. New roles added regularly across leading industries. Apply today.

7002 power plant operator jobs NEAR_ME

Power Plant Field Operator - O&M & Start-up

Field Operator

Coal/Ash Desk Operator - I

BMS Operator

BMS Operator

Site Engineer - O&M- SOLAR - KHAVADA

Site Incharge O&M (Solar) - Jadi, GJ - AM