power systems engineer

Amentum

<div><p>The <b>Electrical Engineer</b> designs, develops and maintains electrical systems and/or components to required specifications, focusing on economy, safety, reliability, quality and sustainability.</p><p></p><p><b>
Principal Accountabilities:</b></p><ul>
<li><p>
Performs design work for new construction, renovations and improvement projects for real property facilities</p></li>
<li><p>
Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards</p></li>
<li><p>
Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers</p></li>
<li><p>
Develops cost estimates and time schedules, Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy</p></li>
<li><p>
Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from Contractors</p></li>
<li><p>
Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering</p></li>
<li><p>
Responsible for the correct and efficient execution of assigned work involving the installation, removal, inspection, maintenance and repair of all electrical systems, distribution systems and fixtures</p></li>
<li><p>
Supervises and coordinates activities of workers engaged in the assembly, installation and repair of electrical cables, systems power distribution systems, distribution panels, inspections, etc</p></li>
<li><p>
Secures the cooperation of other crafts/trades supervisors and to instill within the assigned electrical staff the cooperative attitude necessary for working closely with other maintenance trade workers</p></li>
<li><p>
May at times be obligated to perform actual maintenance and repair work</p></li>
<li><p>
Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment</p></li>
<li><p>
Perform other qualified duties as assigned</p></li>
<li><p>
Living and working conditions at the assignment location could be remote and uncomfortable</p></li>
<li><p>
Long hours, exposure to weather and hazardous conditions</p></li>
<li><p>
Personnel should be aware of moving on short notice and under adverse conditions</p></li>
<li><p>
Ability to travel domestically and internationally</p></li>
</ul><p></p><p><b>
Minimum Requirements:</b></p><ul>
<li><p>
Must be a degreed electrical engineer (licensed electrical engineer is preferred)</p></li>
<li><p>
Minimum four (4) years of design experience and be capable of complete design and investigative services including electric power distribution networks, power load determination, exterior electric, interior electric, fire alarm systems, and site lighting.</p></li>
<li><p>
Should have experience in controls systems designs.</p></li>
<li><p>
Must be proficient in AutoCAD 2012 or later and have experience with power system analysis software.</p></li>
<li><p>
Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</p></li>
</ul><p></p><p><b>
Preferred Qualifications:
</b></p><ul><li><p>Excellent communications, effective leadership and interpersonal skills</p></li>
<li><p>
Capable of complete design services including electric power distribution networks, power load determination, exterior electric, interior electric, and site lighting</p></li>
<li><p>
Working knowledge of Design Review, Project Mobilization, Quality Compliance, QA, Safety, Project Controls, and Capture Management</p></li>
<li><p>
Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution</p></li>
<li><p>
Computer literate; can use Microsoft Office and Project, etc</p></li>
<li><p>
Additional knowledge/skills may be required by contract or assignment</p></li></ul></div>

Electrical Engineer

Quanta Power Solutions

<div>
 <p>
  Quanta Power Solutions is seeking an experienced
  <strong>
   Electrical Engineer III
  </strong>
  to support the design and development of electrical systems for EPC power generation and distribution projects. This role supports projects involving gas turbines, renewable energy facilities, battery energy storage systems (BESS), substations, and transmission infrastructure. The Electrical Engineer III will contribute to the development of complete construction packages for power generation facilities supporting utility, industrial, and data center clients.
 </p>
 <p>
  <br/>
 </p>
 <p>
  The ideal candidate will possess strong electrical engineering expertise, experience in EPC project execution, and the ability to independently execute engineering deliverables while coordinating across multidisciplinary teams.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Responsibilities
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Engineering Design &amp; Analysis
  </strong>
 </p>
 <ul>
  <li>
   Develop electrical engineering designs for power generation, renewable energy, BESS, substation, and transmission projects.
  </li>
  <li>
   Produce estimate-level preliminary designs and material take-offs (MTOs).
  </li>
  <li>
   Develop and assemble engineering scopes, drawings, specifications, and procurement packages for equipment and materials.
  </li>
  <li>
   Lead development of detailed electrical engineering deliverables, including:
  </li>
  <li>
   Single-line diagrams
  </li>
  <li>
   Motor elementary diagrams
  </li>
  <li>
   Interconnect diagrams
  </li>
  <li>
   Electrical cable schedules
  </li>
  <li>
   Equipment specifications
  </li>
  <li>
   Material take-offs (MTOs)
  </li>
  <li>
   Grounding systems
  </li>
  <li>
   Lighting systems
  </li>
  <li>
   Lightning protection systems
  </li>
  <li>
   Heat tracing systems
  </li>
  <li>
   Perform engineering calculations to validate system performance and design integrity, including:
  </li>
  <li>
   Arc flash studies
  </li>
  <li>
   Grounding grid analysis
  </li>
  <li>
   Protective device coordination studies
  </li>
  <li>
   Load flow evaluations
  </li>
  <li>
   Voltage drop calculations
  </li>
  <li>
   Design and implement instrumentation systems for process control, monitoring, and automation applications.
  </li>
 </ul>
 <p>
  <strong>
   Project Execution
  </strong>
 </p>
 <ul>
  <li>
   Support projects through conceptual design, detailed engineering, procurement, construction, commissioning, and startup phases.
  </li>
  <li>
   Coordinate electrical engineering activities with mechanical, civil, structural, process, instrumentation, and project management teams.
  </li>
  <li>
   Review project specifications, client requirements, and applicable industry standards.
  </li>
  <li>
   Identify and communicate scope changes, technical risks, and design updates throughout project execution.
  </li>
  <li>
   Participate in design reviews, constructability reviews, and interdisciplinary coordination meetings.
  </li>
 </ul>
 <p>
  <strong>
   Procurement &amp; Vendor Coordination
  </strong>
 </p>
 <ul>
  <li>
   Prepare technical specifications and procurement documentation.
  </li>
  <li>
   Review and evaluate vendor proposals and technical submittals.
  </li>
  <li>
   Review vendor drawings and equipment documentation for compliance with project requirements.
  </li>
  <li>
   Coordinate with suppliers and manufacturers to resolve technical issues and ensure successful equipment integration.
  </li>
 </ul>
 <p>
  <strong>
   Construction &amp; Commissioning Support
  </strong>
 </p>
 <ul>
  <li>
   Prepare construction packages and installation documentation.
  </li>
  <li>
   Support field implementation, startup, testing, and commissioning activities.
  </li>
  <li>
   Assist with troubleshooting and resolution of electrical system issues during construction and startup.
  </li>
  <li>
   Respond to contractor requests for information (RFIs) and field engineering inquiries.
  </li>
  <li>
   Conduct site visits and field verification activities as required.
  </li>
 </ul>
 <p>
  <strong>
   Quality &amp; Compliance
  </strong>
 </p>
 <ul>
  <li>
   Ensure engineering deliverables comply with:
  </li>
  <li>
   National Electrical Code (NEC)
  </li>
  <li>
   IEEE Standards
  </li>
  <li>
   ISA Standards
  </li>
  <li>
   NFPA Requirements
  </li>
  <li>
   Client specifications
  </li>
  <li>
   Company engineering standards
  </li>
  <li>
   Maintain adherence to quality management procedures and engineering best practices.
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Qualifications
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Education &amp; Experience
  </strong>
 </p>
 <ul>
  <li>
   Bachelor&rsquo;s or Master&rsquo;s Degree in Electrical Engineering from an accredited university.
  </li>
  <li>
   Professional Engineer (PE) license preferred or actively pursuing licensure.
  </li>
  <li>
   Minimum 5&ndash;7 years of relevant electrical engineering experience.
  </li>
  <li>
   EPC, power generation, utility, industrial, or energy infrastructure project experience strongly preferred.
  </li>
 </ul>
 <p>
  <strong>
   Technical Skills
  </strong>
 </p>
 <ul>
  <li>
   Proficiency with:
  </li>
  <li>
   AutoCAD
  </li>
  <li>
   AutoCAD Plant 3D
  </li>
  <li>
   Revit
  </li>
  <li>
   Elecdes
  </li>
  <li>
   ETAP
  </li>
  <li>
   SKM PowerTools
  </li>
  <li>
   PSCAD
  </li>
  <li>
   AGi32
  </li>
  <li>
   DIALux
  </li>
  <li>
   Microsoft Office Suite (Word, Excel, Outlook, Access)
  </li>
  <li>
   Experience with:
  </li>
  <li>
   PLC systems
  </li>
  <li>
   Distributed Control Systems (DCS)
  </li>
  <li>
   SCADA systems
  </li>
  <li>
   Industrial instrumentation
  </li>
  <li>
   Strong knowledge of:
  </li>
  <li>
   NEC
  </li>
  <li>
   IEEE
  </li>
  <li>
   ISA
  </li>
  <li>
   NFPA
  </li>
  <li>
   Electrical engineering standards and practices
  </li>
  <li>
   Ability to develop efficient, practical, and constructible electrical designs that support project budget and schedule requirements.
  </li>
  <li>
   Familiarity with EPC project workflows, engineering documentation, and quality standards.
  </li>
 </ul>
 <p>
  <strong>
   Professional Skills
  </strong>
 </p>
 <ul>
  <li>
   Strong analytical and problem-solving capabilities.
  </li>
  <li>
   Excellent written and verbal communication skills.
  </li>
  <li>
   Ability to work independently while collaborating effectively within multidisciplinary teams.
  </li>
  <li>
   Strong organizational and time-management skills.
  </li>
  <li>
   Ability to manage multiple assignments and priorities in a fast-paced project environment.
  </li>
  <li>
   Commitment to quality, safety, and continuous improvement.
  </li>
 </ul>
 <p>
  <strong>
   Physical Requirements
  </strong>
 </p>
 <ul>
  <li>
   Ability to sit, stand, or walk for extended periods.
  </li>
  <li>
   Willingness to travel periodically for project meetings, site visits, startup activities, and commissioning support.
  </li>
 </ul>
 <p>
  <strong>
   Why Join Us?
  </strong>
 </p>
 <ul>
  <li>
   Competitive Compensation
  </li>
  <li>
   Weekly Pay
  </li>
  <li>
   401(k) Retirement Plan
  </li>
  <li>
   Holiday Pay
  </li>
  <li>
   Paid Time Off (PTO)
  </li>
  <li>
   Comprehensive Health Coverage
  </li>
  <li>
   Pet Insurance
  </li>
  <li>
   Employee Assistance Program (EAP)
  </li>
  <li>
   Professional Development Opportunities
  </li>
  <li>
   Tuition Assistance
  </li>
  <li>
   Employee Discount Program
  </li>
 </ul>
</div>


Electrical Engineer III

DYNAMIC MOTION

<p><b>Job Title:</b> Electrical Engineer</p><p><b>Job Summary:</b><br/>An Electrical Engineer designs, develops, tests, and maintains electrical systems, equipment, and components. They ensure that electrical systems operate safely, efficiently, and in compliance with industry standards and regulations.</p><p>Key Responsibilities</p><ul><li>Design and develop electrical systems, circuits, and equipment.</li><li>Prepare technical drawings, specifications, and documentation.</li><li>Conduct testing, troubleshooting, and maintenance of electrical systems.</li><li>Analyze project requirements and provide engineering solutions.</li><li>Ensure compliance with safety regulations, codes, and quality standards.</li><li>Collaborate with mechanical engineers, technicians, and project managers.</li><li>Monitor project progress and provide technical support during installation and commissioning.</li><li>Perform cost estimation and resource planning for electrical projects.</li><li>Evaluate system performance and recommend improvements.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's degree in Electrical Engineering.</li><li>Knowledge of electrical design software such as AutoCAD, MATLAB, ETAP, or similar tools.</li><li>Understanding of electrical codes, standards, and safety regulations.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and teamwork abilities.</li></ul><p>Preferred Skills</p><ul><li>Experience with power systems, control systems, or industrial automation.</li><li>Knowledge of PLCs, SCADA, and electrical protection systems.</li><li>Project management and leadership skills.</li><li>Ability to read and interpret technical drawings and schematics.</li></ul><p>Working Conditions</p><ul><li>Work may be performed in offices, manufacturing plants, construction sites, or power facilities.</li><li>Occasional travel may be required for site inspections and project implementation.</li></ul><p>Salary Range</p><p>Salary varies by industry, experience, and location, typically ranging from entry-level to senior engineering positions with increasing responsibilities.</p><p>Pay: AED4,000.00 - AED8,000.00 per month</p><p>Work Location: In person</p>

Garver

<div>
 Careers
 <br/>
 <br/>
 Electrical Engineer
 <br/>
 <br/>
 Jacksonville, Florida
 <br/>
 <br/>
 Garver&rsquo;s growing Aviation team is seeking an
 <strong>
  Electrical Engineer
 </strong>
 in our
 <strong>
  Jacksonville, FL
 </strong>
 office that will be responsible for working with our electrical team on a wide array of facility, building, and airport-related design, construction, project administration, and client management services for a variety of clients.
 <br/>
 <br/>
 General responsibilities will include electrical design and construction support as required for a variety of projects. Many of the expected assignments will be related to developing infrastructure improvements to facilities, including the investigation, planning, design, and construction of electrical power, lighting, controls, communications, and other special systems. Tasks may also include design and construction for airport airside electrical systems, electrical masterplans, EV charging stations, and roadway lighting. The successful engineer will need to be self-motivated, and able to work independently on multiple projects with varying schedules and deadlines.
 <br/>
 <br/>
 As responsibilities grow, this engineer will have the opportunity to work on airports throughout Garver&rsquo;s service area. The engineer may also perform onsite construction observation duties, construction administration and submittal reviews for projects under construction.
 <br/>
 <br/>
 <strong>
  Day to day responsibilities will include, but are not limited to:
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Working with your electrical team to develop detailed design and specification documents for facilities, including one-line (single line) diagrams, power plans, system modeling, lighting plans, and required design calculations under the supervision of a Professional Engineer.
  </li>
  <li>
   Coordinating with other support discipline activities on projects, coordinating with regional Garver offices and regulating agencies, construction cost estimating, and quality assurance and control.
  </li>
  <li>
   Assisting the Electrical Team Leader in coordinating schedules, managing multiple assignments concurrently, monitoring project budgets, and ensuring delivery of quality work products which adhere to Garver standards.
  </li>
  <li>
   Working with and oversite of junior engineers assigned to projects.
  </li>
  <li>
   Attending training and support classes/seminars to continue and develop new skillsets in electrical design
  </li>
  <li>
   Some regional travel may be required as projects may require field work for site assessment of project locations and support during construction. Occasionally this travel may involve overnight stays. Regional and National travel is estimated at 10-15% of time with accelerated hands-on learning providing a foundation for your design work.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Requirements
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Bachelor of Science in electrical engineering from an ABET accredited program.
  </li>
  <li>
   5+ years of experience in electrical engineering
  </li>
  <li>
   PE in FL
  </li>
  <li>
   Previous experience working with design software packages such as AutoCAD, REVIT, and Civil 3D.
  </li>
  <li>
   Technical skills to work, or learn to work, safely and competently with electrical testing equipment.
  </li>
  <li>
   Career goal to obtain PE registration states of practice within 3 years.
  </li>
  <li>
   Passion for Electrical, Aviation, and other special system projects.
  </li>
  <li>
   Excellent written and oral communication skills, including:
  </li>
  <li>
   Strong communication skills and the ability to present designs and technical information to coworkers and clients in front of groups.
  </li>
  <li>
   Strong technical writing skills.
  </li>
  <li>
   Individually motivated with strong self-accountability
  </li>
  <li>
   Proficient with Microsoft Office software programs such as Word, Excel, and Outlook.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Preferred Skills
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Current PE registration in Garver&rsquo;s states of practice
  </li>
  <li>
   Previous experience working with power modeling packages such as SKM and EasyPower.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Grow With Us
  <br/>
  <br/>
 </strong>
 Garver offers its employees programs such as company-paid professional memberships, company support for industry licenses and continuing education opportunities that foster a progressive atmosphere. Garver provides the tools, resources, and environment to develop leaders, stimulate ideas, and accomplish projects. By offering highly competitive salary packages, attractive benefits, and a comprehensive wellness program; Garver walks the talk when it comes to work-life balance.
 <br/>
 <br/>
 Founded in 1919, Garver is an employee-owned engineering, planning, and environmental services firm focused on aviation, transportation, buildings, federal, water and wastewater services; surveying; advisory services; and construction engineering and inspection. In the top 100 of Engineering News-Record&rsquo;s Top 500 Design Firms list, with more than 1,400 employees, Garver provides an exceptional level of client service that reflects our people-first culture, which has achieved Zweig Group Best Firm to Work For Legacy Status. Learn how Garver invests in people and places they call home at GarverUSA.com.
 <br/>
 <br/>
 <em>
  Garver is committed to providing equal employment opportunities to all applicants and employees. Our employment practices are based upon an individual's capabilities and qualifications without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other category protected by law.
  <br/>
  <br/>
 </em>
 Apply Now! Get in Touch
 <br/>
 <br/>
</div>


Schweitzer Engineering Laboratories

<div><p>The devices we make at SEL are integral to the power grid operation and reliability. They prevent blackouts, they save lives. They make outages shorter in duration; they add cybersecurity, automation, and communication. Our devices use cutting-edge technologies and operate at speeds that push other pieces of the grid to go even faster!</p><p></p><div><div><div><div><div><div><div><div><div><p>
SEL products and technologies are critical for the safe, reliable operation of power systems around the world, so our products are built with the highest-quality components in SEL facilities by SEL employees. As an Application Engineer in Sales and Customer Service, you will help customers apply SEL protection and control devices, solve application challenges and assist customers from utilities, and industrials background solve problems!</p></div></div></div></div></div></div></div></div></div><p></p><div><p><b>
As an Application Engineer, a typical day might include the following:</b></p><ul><li><p>
Helping customers apply SEL products through visits, demonstrations, training courses, emails and telephone contact.</p></li><li><p>
Developing expertise in power systems, metering, protection, and SEL products.</p></li><li><p>
Sharing your knowledge and experience to enhance the quality of our customer support.</p></li><li><p>
Authoring technical papers, application guides, application videos and presentations.</p></li><li><p>
Solving problems, working in and leading technical teams and answering engineering and testing questions.</p></li><li><p>
Supporting achieving our sales goals, our Engineering Services group and our SEL University where needed.</p></li><li><p>
Ensuring yours and the teams safety throughout the day.</p></li></ul><p></p><p><b>
This job might be for you if:</b></p><ul><li><p>
You are passionate about engineering.</p></li><li><p>
You like solving problems and troubleshooting.</p></li><li><p>
You are curious to learn new technology.</p></li><li><p>
You like teaching others and sharing your technical expertise.</p></li><li><p>
You enjoy working both independently and in team environments.</p></li><li><p>
You have a strong focus on Customer Service.</p></li></ul><p></p><p><b>
Location
</b></p><p>Dubai - UAE</p><p></p><p><b>
Why SEL?
</b></p><p><b>Competitive pay. Superior benefits. Inspiring work.</b></p><p><b><br>
</b></p><p>We provide and take care of our employees with outstanding benefits, competitive pay, challenging work, and a rewarding career.</p><ul><li><p>
Top tier medical, prescription, dental, vision, life, and accident insurance.</p></li><li><p>
Varied leave plans like annual leaves, sick leaves, parental leaves etc. to maintain a healthy life balance</p></li><li><p>
Developmental programs like tuition assistance, internships, skill development courses and engineering development programs (EDP).</p></li><li><p>
Wellbeing benefits like free and confidential Employee Assistance Program (EAP) and reimbursable yearly gym membership</p></li><li><p>
International Travel Medical and Security Assistance to assist our traveling employees and accompanying family members worldwide</p></li><li><p>
Provident fund contribution</p></li></ul><p></p><p><b>
Pay Range Data</b></p><p>
We base our starting pay offer on location and job-related factors such as candidate experience, training, knowledge, and skills.</p><p></p><p><b>
Communication with Applicants</b></p><p>
We communicate with all applicants. If you do not receive a response about your application, please check your SPAM filter or reach out to us at careers@selinc.com.</p><p></p><p>
SEL is an Equal Opportunity Employer: Vets/Disabled.</p></div></div><p></p>

Application Engineer II - Protection

<div><p>The devices we make at SEL are embedded in the power grid. They prevent blackouts. They make outages safer and shorter in duration; they add cybersecurity, automation, and communication. They use cutting-edge technologies and operate at speeds that push other pieces of the grid to go faster. As a Power System Studies Engineer in Engineering Services, you&rsquo;ll provide solutions and services that help our customers protect and control critical electrical infrastructure and power systems worldwide.
</p><p></p><p><b>As a Project Engineer II/III - Studies, a typical day might include the following:</b></p><p>
1. Serve as technical lead and actively participate in complex project conceptual and detail design, execution, development, and support activities crossing multiple projects, demonstrated experience using PSSE, ETAP, and/or RTDS. Strong electrical power systems knowledge.</p><p>
2. Identify, prepare and present successful proposals for SEL equipment, services, and systems.</p><p>
3. Lead project teams to resolve customer concerns and foster customer satisfaction.</p><p>
4. Ensure project team deliverables are within agreed upon scope, schedule and budget to a high level of quality and safety.</p><p>
5. Mentor and develop professional staff. May supervise as necessary.</p><p><b><br>
This job might be for you if you have:</b></p><p>
B.S. in Electrical Engineering or relevant discipline</p><p>
5+ years relevant application experience with electric power systems or industrial automation system practices</p><p>
Demonstrated knowledge of electric power system protection and control, integration and/or automation and communications applications</p><p>
Demonstrated knowledge of electric power system design, studies, information and communication technology and protective relay applications</p><p>
Willing to travel both domestically and internationally a minimum of 25% based on focus area</p><p>
Demonstrated ability to lead and supervise project teams</p><p>
Excellent writing, documentation, and speaking skills</p><p>
Ability to learn new skills and assume new responsibilities</p><p>
Ability to work cooperatively in a team environment</p><p><b><i><br>
Preferred Qualifications</i></b></p><p>
Professional Engineers License or equivalent certification</p><p>
Electrical utility, industrial plant, consulting engineering, or system integrator experience</p><p>
Project management experience</p><p>
Working knowledge of Vision or other project management tracking software</p><p></p><div><p><b>
Location
</b></p><p>Dubai - UAE</p><p></p><p><b>
Why SEL?
</b></p><p><b>Competitive pay. Superior benefits. Inspiring work.
</b></p><p>We provide and take care of our employees with outstanding benefits, competitive pay, challenging work, and a rewarding career.</p><ul><li><p>
Top tier medical, prescription, dental, vision, life, and accident insurance.</p></li><li><p>
Varied leave plans like annual leaves, sick leaves, parental leaves etc. to maintain a healthy life balance</p></li><li><p>
Developmental programs like tuition assistance, internships, skill development courses and engineering development programs (EDP).</p></li><li><p>
Wellbeing benefits like free and confidential Employee Assistance Program (EAP) and reimbursable yearly gym membership</p></li><li><p>
International Travel Medical and Security Assistance to assist our traveling employees and accompanying family members worldwide</p></li><li><p>
Provident fund contribution</p></li></ul><p></p><p><b>
Pay Range Data</b></p><p>
We base our starting pay offer on location and job-related factors such as candidate experience, training, knowledge, and skills.</p><p></p><p><b>
Communication with Applicants</b></p><p>
We communicate with all applicants. If you do not receive a response about your application, please check your SPAM filter or reach out to us at careers@selinc.com.</p><p></p><p>
SEL is an Equal Opportunity Employer: Vets/Disabled.</p></div></div><p></p>

Project Engineer - Power System Studies

Dominion Energy

<p></p><div><p>Dominion Energy is committed to providing reliable, affordable, and increasingly clean energy that powers our customers every day. If you want to work for a purpose-driven company that values safety and collaboration, we&rsquo;re looking for you. You won&rsquo;t just find a job here; you&rsquo;ll find your career. Review the position below and apply today.</p><br>
<p></p>
<p></p><p>Military service members and veterans with ranks from E5-E9, W1-CW5, or O3-O6, plus appropriate equivalent combination of education and years of experience as outlined below will be considered for this opportunity.<br>
</p><p></p><div><div><div><h2 class="jobSectionHeader"><b>Job Summary</b></h2>
</div><div><div>
<p>VC Summer Nuclear Station is seeking an Electrical Engineer (Engineer to Staff-level, based on experience) to support the design, analysis, and modification of electrical systems within a nuclear power generating station. Electrical Engineers are responsible for plant electrical distribution systems, instrumentation and control interfaces, protective relaying, and the performance and reliability of safety-related and balance-of-plant electrical equipment. Responsibilities also include maintaining design basis documentation and supporting plant licensing and regulatory compliance.</p>
<p>
This position will be filled at a level commensurate with the selected candidate&rsquo;s education, experience, and demonstrated technical expertise.</p></div><br>
<p><br>
This role is Mid level to Expert level in all conventional aspects of the subject matter in the engineering series provides engineering support in designated company area, or specific engineering discipline. Performs and/or reviews engineering calculations, analysis, research and design. Provides cost analysis as needed and develops recommendation based on calculations (e.g. cost for equipment upgrade for management review. Distinguished from the Associate Engineer by increased complexity in application of engineering skills required. Under direction of supervisor or work leader, exercises independence in evaluating, selecting and applying standard or well defined engineering techniques, procedures and criteria. Uses independent judgment in prioritizing and making moderately complex adaptations and modifications. Assignments have clear and specified objectives and require investigation of a limited number of variables.<br>
Perform other duties as requested or assigned.</p>
<p>
May serve as a member of the Emergency Response Organization (ERO), responding to plant ERO activities in 30-60 minutes.</p></div></div><div><div><h2 class="jobSectionHeader"><b>
Engineer</b></h2>
</div><div><p>
2+ years of relevant engineering experience; Knowledge and application of engineering theories and principles, concepts, and fundamentals; Requires developmental experience in a professional engineering position; Competency in applying engineering principles, fundamental concepts, practices and procedures requiring some evaluation, originality and/or ingenuity to achieve project objectives; Understands and can apply knowledge of configuration management; Ability to perform engineering calculations using applicable software programs (e.g. Matlab, Excel, etc.); Planning, organizational and project management skills; Ability to develop and exercise leadership skills; Effective decision making skills; Effective oral and written communication skills (includes technical writing); Ability to think analytically and solve complex problems; Ability to interpret codes, regulations and practices; Equally effective working independently or in a team environment; Ability to process information quickly and effectively manage multiple tasks.</p></div></div><div><div><h2 class="jobSectionHeader"><b>
Senior Engineer</b></h2>
</div><div><p>
5+ years of relevant engineering experience; Full knowledge of engineering theories and principles; Skilled in use of advanced techniques and modification and extension of theories, precepts and practices of the field and related sciences and disciplines; Strong leadership skills with proven ability to serve as team project lead; Strong oral and written communication skills (includes technical writing); Strong personal computer skills; Ability to think analytically and solve complex problems; Ability to interpret codes, regulations and practices; In depth knowledge of various computer applications, with the ability to manipulate personal computer applications and perform engineering calculations using applicable software programs (e.g. Matlab, Excel, etc.); Equally effective working independently or in team environment; Proven decision making skills; Ability to process information quickly and effectively manage multiple tasks; Strong planning, organizational and project management skills.</p></div></div><div><div><h2 class="jobSectionHeader"><b>
Staff Engineer</b></h2>
</div><div><p>
8+ years of relevant engineering experience (An Engineering PhD can be substituted for up to 5 years&rsquo; experience based on research engineering work on related projects approved by executive leadership.)<br>
<br>
-Extensive knowledge of engineering theories, principles, and practices to a broad variety of assignments and related field.-Extensive skilled in use of advanced techniques and modification and extension of theories, precepts and practices of the field and related sciences and disciplines.-Full Knowledge of business/financial and contractual matters.-Recognized expert by other engineers and management in assigned area.-Provides expert technical advice to other engineers and management in assigned area.-Skilled in the use of advanced engineering techniques.-Strong planning and project management skills.-Strong technical and organizational leadership skills.-Strong oral and written communication skills (includes technical writing).-In depth knowledge of various computer applications, with the ability to manipulate personal computer applications and perform engineering calculations using applicable software programs (e.g., Matlab, Excel, etc.).-Proven decision-making skills.- Demonstrated ability to think analytically and solve complex problems.- Demonstrated ability to interpret and apply codes, regulations, and practices.- Demonstrated ability to process information quickly and effectively manage multiple tasks.-Equally effective working independently or in team environment</p></div></div><div><div><h2 class="jobSectionHeader"><b>
Required Knowledge, Skills, Abilities &amp; Experience</b></h2>
</div><div><p>
The knowledge, skills, abilities and experience required for entry into this job include the following:</p><br>
<p>
Experience or knowledge in any of the following is desired. AC power generation and distribution systems including steam turbine generators, diesel generators, motor control centers, large transformers (1000 kVA to1232 MVA), motors up to 7000 HP, uninterruptable power supplies, switchgear, and protective device settings. AC Systems range from 120V to 230 kV. DC power systems including motor control, batteries, 125V distribution systems and battery chargers. Design of digital control and instrumentation systems.</p>
<ul>
<li>Requires developmental experience in a professional engineering position</li>
<li>Competency in applying engineering principles, fundamental concepts, practices and procedures requiring some evaluation, originality and/or ingenuity to achieve project objectives</li>
<li>Understands and can apply knowledge of configuration management</li>
<li>Ability to perform engineering calculations using applicable software programs (e.g. Matlab, Excel, etc.)</li>
<li>Planning, organizational and project management skills</li>
<li>Ability to develop and exercise leadership skills</li>
<li>Effective decision-making skills</li>
<li>Effective oral and written communication skills (includes technical writing)</li>
<li>Ability to think analytically and solve complex problems</li>
<li>Ability to interpret codes, regulations and practices</li>
<li>Equally effective working independently or in a team environment</li>
<li>Ability to process information quickly and effectively manage multiple tasks.</li>
<li>Nuclear employees: Must have at least one year of Nuclear power experience.</li>
</ul>
<p>REQUIRED ENGINEERING CRITERIA: For placement of a candidate in the Engineer job series, the following criteria must be met:
</p><p>Possess a 4-year Engineering degree from an ABET accredited Engineering program based on the year that the Engineering program was accredited by ABET, or
</p><p>Possess a 4-year Engineering degree from an institution outside of the U.S. which is accredited through the country's own Engineering accrediting body under the Washington Accord as a full signatory, and is a degree that was recognized by the country's accrediting body on or after the date that full signatory status was achieved, or
</p><p>Possess a 4-year degree in Engineering (non-ABET accredited), Physics, Chemistry, Math or Engineering Technology and a post-graduate Engineering degree from an institution where the undergraduate degree in the same Engineering discipline is ABET-accredited based on the year the Engineering program was accredited by ABET, or
</p><p>Holds or has previously held a valid U.S. Professional Engineer license.</p></div></div><div><div><h2 class="jobSectionHeader"><b>
Education Requirements</b></h2>
</div><div><p>
Required Degree (equivalency not accepted in lieu of required degree):</p>
<p>Bachelor&rsquo;s in Engineering</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Licenses, Certifications, or Quals Description</b></h2>
</div><div><p><b>
Note: Dominion Energy minimum experience and education requirements may exceed stated ANSI standards and candidates must meet the Dominion Energy minimum requirements.</b></p>
<p>For <b>Nuclear</b> employees, this ANSI standard must be met, all of which is met or exceeded in the Engineer series job summaries with the exception of the Nuclear Power experience requirement of at least 1 year:</p>
<p>ANSI/ANS-3.1-2014, Section 4.6.1 Education requirements: Baccalaureate or associate degree in engineering or related science. Minimum experience for the position: Related experience which shall include 2 years; Nuclear power plant experience to include 1 year.</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Working Conditions</b></h2>
</div><div><div>Dust / Grease / Oil Up to 25%</div><div>
Energized Wires Up to 25%</div><div>
Fumes Up to 25%</div><div>
Heat Up to 25%</div><div>
Loud Noise Up to 25%</div><div>
Office Work Environment 76 -100%</div><div>
Operating Machinery Up to 25%</div><div>
Travel Up to 25%</div><div>
Radiation Up to 25%</div></div></div><div><div><h2 class="jobSectionHeader"><b>
Other Working Conditions</b></h2>
</div></div><div></div><div><div><h2 class="jobSectionHeader"><b>Test Description</b></h2>
</div><div><p>
No Testing</p></div></div></div><br>
<p></p>
<p><b>Export Control</b></p><br>
<p><br>
Certain positions at Dominion Energy may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in Dominion Energy limiting its consideration of certain applicants.</p><br>
<p></p>
<p><b>Other Information</b></p><br>
<p><br>
We offer excellent plans and programs for employees. Employees are rewarded with a competitive salary and comprehensive benefits package which may include: health benefits with coverage for families and domestic partners, vacation, retirement plans, paid holidays, tuition reimbursement, and much more. To learn more about our benefits, click here dombenefits.com.</p>
<p>Dominion Energy is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin and/or status as a protected veteran or individual with a disability.</p>
<p>You can experience the excitement of our company &ndash; it's the difference between taking a job and starting a career.</p></div>

Engineer/Senior Engineer/Staff Engineer - Electrical Engineering VC Summer SC (JENKINSVILLE, SC, US, 29065)

Search 10000+ Power systems engineer jobs near you this July. New roles added regularly across leading industries. Apply today.

10000 power systems engineer jobs Near Me

Electrical Engineer

Electrical Engineer III

Electrical Engineer

Electrical Engineer

Application Engineer II - Protection

Project Engineer - Power System Studies

Engineer/Senior Engineer/Staff Engineer - Electrical Engineering VC Summer SC (JENKINSVILLE, SC, US, 29065)