planning engineer Jobs in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

planning engineer

civil engineer Jobs in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

civil engineer

project engineer Jobs in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

project engineer

senior planning engineer Jobs in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

senior planning engineer

sr. planning engineer Jobs in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

sr. planning engineer

principal piping engineer

Muscat Engineering Consultancy LLC

<div>
 <p>
  <strong>
   Job title:
  </strong>
  Principal Engineer &ndash; Piping.
 </p>
 <p>
 </p>
 <p>
  <strong>
   Reports to:
  </strong>
  Department Head / Country Head
 </p>
 <p>
  <br/>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Objective of the job
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  Execute all the project activities related to piping engineering in efficient manner focusing on Client and Quality requirements. Client satisfaction shall be ultimate goal of the job.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Duties and responsibilities
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Design realization
  </strong>
 </p>
 <p>
  The principal accountabilities are listed as below and to be performed in consultation with all disciplines involved, in accordance with legislation and regulations, technical guidelines, the program of requirements and the MEC Quality System (MQS), in order to contribute to the tender and the realization of the project design (or parts thereof).
 </p>
 <p>
  <br/>
 </p>
 <ul>
  <li>
   To provide discipline engineering expertise to all project design phases in accordance with the project plan, standards, norms and other regulations applicable.
  </li>
  <li>
   In depth knowledge of International and Client codes and standards
  </li>
  <li>
   To ensure design packages meet the required safety, environmental and ergonomic standards
  </li>
  <li>
   Co-ordination with other discipline and design product suppliers to Implement and provide a good Design.
  </li>
  <li>
   Attending site visits to verify and Collect the data in order to provide required design by client.
  </li>
  <li>
   Review Designers and Draftsmen&rsquo;s work to develop optimum layout and Design.
  </li>
  <li>
   On request, monitor construction, testing, and commissioning work executed by the construction contractors for compliance with the project specification.
  </li>
  <li>
   Review / Guide in preparation of Plot Plan, Piping Plan&rsquo;s, Piping Isometrics, Key plan, tie-in schedule, Piping Bill of Material, Support Schedule.
  </li>
  <li>
   Preparation of Piping item requisitions and technical evaluation of subsequent bids for discipline material purchases, Vendor drawing review.
  </li>
  <li>
   Ensure designs are executed in line with international/Client specifications, standards and procedures.
  </li>
  <li>
   Preparing and Presenting the Model reviews and closing the outcomes
  </li>
  <li>
   Participating the Reviews such as Design Review, HAZOP, HAZID, SIMOPS and Other safety reviews.
  </li>
  <li>
   Addressing and closing the Site queries in accordance with the standards and consulting with Senior Engineers.
  </li>
  <li>
   Review and providing the other discipline Documents where interface exists.
  </li>
  <li>
   Act as Principal piping engineer of projects, managing discipline design teams of junior engineers and designers. Utilize resources in optimal manner to meet Client needs. Identify requirement of additional resources to Department manager well in time.
  </li>
  <li>
   To actively train and encourage the development of staff to fulfil process and systems engineering roles.
  </li>
  <li>
   To provide feedback on improvement to the Company&rsquo;s design standards.
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Required knowledge and experience
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Educational qualification:
  </strong>
 </p>
 <p>
  Bachelors / Masters in Mechanical Engineering
 </p>
 <p>
  <strong>
   Professional and intellectual level:
  </strong>
 </p>
 <p>
  Having MMUP Grade A certificate
 </p>
 <p>
  <strong>
   Work experience:
  </strong>
 </p>
 <p>
  Minimum 15 years in FEED / Detailed Design
 </p>
 <p>
  <strong>
   Knowledge of / experience with:
  </strong>
 </p>
 <p>
  FEED / Detailed Design Engineering activities for Piping Design for onshore and offshore projects
 </p>
 <p>
 </p>
</div>


Principal Piping Engineer

Worley

<div>
 <strong>
  Building on our past. Ready for the future
  <br/>
  <br/>
 </strong>
 Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 <br/>
 <br/>
 <strong>
  Key Responsibilities
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment
  </li>
  <li>
   A thorough knowledge of the regulations, codes and standards and a good understanding of onshore and offshore engineering practices applicable to topsides/plant layout and piping design for oil and gas facilities.
  </li>
  <li>
   Extensive current design experience is required in piping engineering, piping stress, pipe supports, topsides &amp; onshore plant equipment layouts and detailed piping design, all gained with notable design contractors and/or oil/gas companies within the industry.
  </li>
  <li>
   Extensive knowledge of piping materials to guide staff in the preparation of piping, valve and SP Item specifications and subsequently ensure purchase to required standards.
  </li>
  <li>
   Experience in brown fields &amp; asset services type project / contracts.
  </li>
  <li>
   Excellent technical and practical engineering skills and able to consistently deliver quality, accurate and timely work to Worley and its clients.
  </li>
  <li>
   An excellent knowledge of the fundamental requirements of the piping discipline, and the basic requirements of other disciplines.
  </li>
  <li>
   An excellent knowledge of applicable local and international standards and statutory and regulatory requirements.
  </li>
  <li>
   Competent in the use of relevant piping discipline specific software.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  HSE Capability
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Maintain HSE focus with the team to ensure OHSE requirements.
  </li>
  <li>
   Demonstrate behaviour and business practices commensurate with a culture of world&rsquo;s best health, safety and environmental performance.
  </li>
  <li>
   Demonstrate a visible and active commitment to:
  </li>
  <li>
   personal well-being.
  </li>
  <li>
   healthy and safe workplaces and activities; and
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Industry Specific Experience
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Extensive work experience at a senior level within the Oil &amp; Gas industry.
  </li>
  <li>
   Design &amp; Engineering experience within the oil and gas industry, with recent experience leading a team of piping discipline engineers and designers
  </li>
  <li>
   Extensive technical, practical and leadership experience in the piping discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Education &ndash; Qualifications, Accreditation, Training
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Full-Time bachelor&rsquo;s degree in mechanical engineering from an accredited university
  </li>
  <li>
   MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.
   <br/>
   <br/>
  </li>
 </ul>
 Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage
 <br/>
 <br/>
 <strong>
  Moving forward together
  <br/>
  <br/>
 </strong>
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 <br/>
 <br/>
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 <br/>
 <br/>
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 <br/>
 <br/>
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
 <br/>
 <br/>
 <strong>
  Company
  <br/>
  <br/>
 </strong>
 Worley
 <br/>
 <br/>
 <strong>
  Primary Location
  <br/>
  <br/>
 </strong>
 QAT-DW-Doha
 <br/>
 <br/>
 <strong>
  Job
  <br/>
  <br/>
 </strong>
 Piping
 <br/>
 <br/>
 <strong>
  Schedule
  <br/>
  <br/>
 </strong>
 Full-time
 <br/>
 <br/>
 <strong>
  Employment Type
  <br/>
  <br/>
 </strong>
 Employee
 <br/>
 <br/>
 <strong>
  Management Level
  <br/>
  <br/>
 </strong>
 Individual Contributor
 <br/>
 <br/>
 <strong>
  Job Posting
  <br/>
  <br/>
 </strong>
 Sep 30, 2025
 <br/>
 <br/>
 <strong>
  Unposting Date
  <br/>
  <br/>
 </strong>
 Ongoing
 <br/>
 <br/>
 <strong>
  Reporting Manager Title
  <br/>
  <br/>
 </strong>
 Department Manager
</div>


EMKAN ENGINEERING

<p><b>Job Opening: Welding Engineer (IWE Certified)</b></p><p><b>Company:</b> Emkan Engineering<br/><b>Location:</b> Qatar<br/><b>Department:</b> Piping Fabrication Workshop</p><p><b>Emkan Engineering</b> is looking for qualified and experienced <b>Welding Engineers</b> to join our <b>Piping Fabrication Workshop</b> in Qatar.</p><p><b>Requirements:</b></p><ul><li>Bachelor&rsquo;s Degree in <b>Mechanical Engineering</b> or related field.</li><li><b>International Welding Engineer (IWE)</b> certification (mandatory).</li><li>Proven experience in <b>piping fabrication and welding operations</b>.</li><li>Strong knowledge of welding codes and standards (ASME IX, ISO, EN, etc.).</li><li>Ability to develop and manage WPS, PQR, and Welder Qualification tests.</li><li>Excellent technical, analytical, and communication skills.</li></ul><p><b>Key Responsibilities:</b></p><ul><li>Oversee and support all welding activities in the piping fabrication workshop.</li><li>Ensure compliance with applicable welding procedures, standards, and client specifications.</li><li>Conduct qualification of welders and procedures (WPS/PQR/WQT).</li><li>Resolve welding-related issues and ensure quality and safety standards are met.</li><li>Coordinate with QA/QC, production, and inspection teams.</li></ul><p>Job Type: Full-time</p>

Welding Engineer

Nakilat

<p></p><div><div><div><div><div><div><div><div><div><div><div><h2 class="jobSectionHeader"><b>Job Summary and Purpose</b></h2>
</div><div><p>
As a Subject Matter Expert (SME), the Senior Production Engineer [Dedicate Overall In-charge for Special Project] provides the technical &amp; technological problem-solving ability of production engineering process and planning abilities in order to lead the entire project piping workstream of a vessel or Offshore and control production process installation, repair, modification or new routing of piping systems and their components. Work is executed to a high quality &amp; auditable standard that is consistent with contract work scope, statutory &amp; code requirements, Integrated Management System (IMS) procedures, design parameters, site survey input, Welding Procedure Specification (WPS), stress inputs and vendor data. This job, and subordinates, are performing final pipe install, modification, repair, routing activities onboard a project environment. Reporting to the main piping manager but providing service for the Project Manager &amp; understands full piping scope, system and process.</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Accountabilities</b></h2>
</div><div><p><b>
Key Accountabilities:</b></p>
<p>1. The Senior Production Engineer (Lead project represented for piping section) for the piping workstream reports to the Piping Manager, and holds the responsibility to lead more than one vessel concurrently for normal refit works. It is expected the Senior Engineer understands full piping scope &amp; system and its repair, refit, retrofit and newbuild coordinates with clients, engineering, procurement, quality and planning department for project preparation and planning.<br>
2. Coordinates for OFE (Owner Finished Equipment) and YFE (Yard Finished Equipment) for delivery dates which is related for projects.<br>
3. Controls execution of all piping works onboard vessel such as installation, repair, modification, new routing etc.<br>
4. Conducting daily project meeting with the own team to meet the schedule.<br>
5. Monitoring &amp; controlling the budgeted man-hours against the plan, including capturing additional billable work (cost control).<br>
6. Monitors and control the budgeted materials against the plan, including capturing additional billable materials (cost control).<br>
7. Coordinates with production workshop &amp; production engineering, to ensure that all fabrication and scope of works meet the plan.<br>
8. Works with the Project Manager to ensure the sequence of piping works fits in with broader work stream schedules<br>
9. Prepares the work completion forms upon job completion and applies Permit to Work (PTW) system.<br>
10. Ensures work are executed to a high standard to facilitate successful job inspections.</p>
<p>11. Coordinates with other trades to ensure end-to-end smooth operations and work completion.<br>
12. Apply a wide knowledge of engineering practices to resolving management challenges related to production to accomplish the production process in the most effective, efficient and most-economic way.<br>
13. Ensure the integrity of the both on board and workshop activity like cutting, beveling, fit-up &amp; inspection, welding &amp; brazing, flushing &amp; chemical cleaning, pressure testing etc.<br>
14. Coordinate and follow up with production engineers for the workshop fabrication, welding, pressure testing and chemical cleaning.<br>
15. Responsible to scale and integrate physical, human and financial resources at meet high efficiency levels at the lowest possible cost &amp; in pursuit of continuous further improvement. Monitor the daily manpower/manhour consumption for the projects and report to manager. Monitor the daily manhour consumption for the projects and update to section manager for any discrepancy. Plan and allocate the manpower as per the vessel work scope. Closely monitor the daily manpower allocation (WHA). Addresses additional manpower requirements to the section manager to allocate additional manhours needed. Ensure completion of the project within the agreed timeframe and manhours allocated.</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Accountabilities - 2</b></h2>
</div><div><p>
16. Closely monitor the section workforce movement for vacation employees, Validating Ras Laffan Industrial City, Qatar ID passes. Monitoring daily food requests prior to submission for approval.<br>
17. Raise Subcontractor Request for subcon manpower if required. Collect the project /vessel specs from the commercial department and assist Piping Manager to assign the piping engineer for the project. Allocate the manpower for the vessels as per the project work scope.<br>
18. Study blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work, sequence of operations, and setup requirements.<br>
19. Review the piping section Work Instructions (WI), Risk Assessment (RA) to cover all the piping activities. Closely follow-up the project in charges for the vessel documentation (SI/Technical Query Report/Work Completion Form/Lesson learnt &amp; Project Postmortem) after completion of vessels.<br>
20. Foster an engaging culture of safe and productive work through role modelling N-KOM's values.<br>
21. Prepare fit for purpose work Permits &amp; Risk Assessments for the identification, control and/or mitigation of workplace risk.<br>
22. Review and update the section Risk Assessments/Environmental Aspects &amp; Impacts as per the latest safe practice and get approval from piping manager.<br>
23. Apply mathematics and statistics to model production systems during decision making process.<br>
24. Design, implement and refine products, services, processes and systems taking in consideration any constraints and local nuances whether supplier, buyer, substitutes, or new emerging information.<br>
25. Apply appropriate knowledge in order to design, redesign or improve product &amp; service functionality. Drive and implement process improvements to reduce assembly hours and build cost.<br>
26. Apply concepts and quality techniques throughout the entire production process &amp; system and deploy organizational standards for control proceedings and auditing.<br>
27. Stay up to date with technological developments, enabling them to enterprises and society;<br>
28. Manage and optimize flow (information and production flow).<br>
29. Apply knowledge to application of castings, machining processing, joining processes, metal cutting &amp; tool design, metrology, machine tools, machining systems, automation, jigs and fixtures, die and mold design, machine designing and manufacturing etc.</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Accountabilities - 3</b></h2>
</div></div><div></div><div><div><h2 class="jobSectionHeader"><b>Accountabilities - 4</b></h2>
</div></div><div></div><div><div><h2 class="jobSectionHeader"><b>Competencies</b></h2>
</div><div><div>Achievement Oriented</div><div>
Collaboration &amp; Teamwork</div><div>
Customer Centricity</div><div>
Drive Vision</div><div>
Empower &amp; Nurture Talent</div><div>
Interactive Communication</div><div>
Solution Oriented</div></div></div><div><div><h2 class="jobSectionHeader"><b>
Key Result Areas</b></h2>
</div><div><ul><li>Productivity - Set &amp; drive KPI</li><li>Safety - foster zero harm culture</li><li>Quality - implement zero reword principles</li><li>Cost - reduced rework and enable timely delivery</li></ul>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Interactions and Working Relations</b></h2>
</div><div><p><b>
Internal</b>: Piping Section &amp; All Sections in NKOM</p>
<p><b>Purpose:</b> To Educate Pipe Shop Team towards Safety, Health, Environment, Quality &amp; Security. To implement SHEQS Requirements within Pipe Shop Team. To Educate Pipe Shop Team about IMS. To Supervise &amp; Perform the Assigned works to Pipe Shop Team.</p>
<p><b>External: </b>Clients, Sub-Contractors, Service Engineers &amp; Surveyors.</p>
<p><b>Purpose: </b>To understand client requirements, update job status. To understand the Sub contractors / Service engineer requirements and to arrange accordingly. For inspection of Piping Items.</p>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Financial Authorities</b></h2>
</div><div><ul><li>As per TOFA.</li></ul>
</div></div><div><div><h2 class="jobSectionHeader"><b>
Qualifications, Experience and Job Skills</b></h2>
</div><div><p><b>
Qualifications:</b></p>
<ul><li>A Diploma or a Degree in Naval Architecture, Marine Engineering, Mechanical Engineering Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent.</li>
</ul>
<p><b>Experience:</b></p>
<ul><li>At least 5 years&rsquo; relevant working experience for Degree Holders and at least 5 years of experience for Diploma Holders (at least 5 years of experience as supervisory role).</li>
</ul>
<p><b>Job Specific Competencies:</b></p>
<div><b>i. Behavioral</b><br>
<ul><li>Drive Vision</li><li>Interactive Communication</li><li>Customer Centricity</li><li>Solution Oriented</li><li>Empower &amp; Nurture Talents</li><li>Collaboration &amp; Teamwork</li><li>Achievement Oriented</li></ul></div>
<div><b>ii. Technical</b><br>
<ul><li>Isometric Drawing Interpretation Skill</li><li>Piping and Instrumentation Diagram (P&amp;ID) Drawing Interpretation Skill</li><li>General Arrangement (GA) Drawing Interpretation Skill</li><li>Knowledge of the Marine Piping System</li><li>Knowledge of material standards such as American Society for Testing and Materials (ASTM), American National Standards Institute (ANSI), Japanese Industrial Standards (JIS), American Society of Mechanical Engineers (ASME), American Petroleum Institute (API), etc.</li><li>Knowledge of lifting gears</li><li>Knowledge of mode of transportation and lifting equipment&rsquo;s</li><li>Knowledge of the heavy lifting, logistics and transportation</li><li>Software Knowledge in Auto cad</li><li>Software Knowledge in Bentley</li><li>Drawing skill for International Organization for Standardization (ISO) and General Arrangement (GA)</li><li>Knowledge of Drawing symbols.</li></ul></div>
</div></div></div>
</div></div></div></div><div></div><div><div><div><div><h1 class="jobSectionHeader"><b>Senior Production Engineer(Piping)
</b></h1></div></div></div></div><div></div><div><div><div><div>Department: Operations
</div></div></div></div><div><div><div><div>City: Ras Laffan<br>
</div></div></div></div><div></div><p><br>
<b>Job Segment: </b>Testing, Manufacturing Engineer, AutoCAD, CAD, Drafting, Technology, Engineering
</p></div><div></div><div><div><p>Apply now</p></div></div></div></div></div><p></p>

Senior Production Engineer(Piping)

Management Solutions International (MSI)

<p></p><div><div><div><div><div><div><div><div><div>Location</div></div>
<div><div>Doha, Qatar</div></div>
</div></div></div><div></div><div><div><div><div><div>Experience</div></div>
<div><ul><li></li></ul></div>
</div></div></div><div></div><div><div><div><div><div>Job Type</div></div>
<div><div>Recruitment</div></div></div></div></div></div></div></div></div>
<br><div><div><div>Job Description
</div></div><div><p><b>Mechanical Engineer</b><br>
<b>Reports to:</b> Project Engineer / Lead Mechanical Engineer<br>
<b>Location:</b> Qatar</p>
<p><b>Job Purpose:</b><br>
To provide mechanical engineering support for leak management projects, ensuring reliable design and integrity of static equipment and piping systems.</p>
<div><b>Key Responsibilities:</b><br>
<ul><li>Perform mechanical engineering calculations, design reviews, and evaluations.</li><li>Support inspection and maintenance of pipelines, valves, and static equipment.</li><li>Develop specifications, data sheets, and technical documentation.</li><li>Support root cause analysis (RCA) for leaks and equipment failures.</li><li>Work with operations and maintenance teams to improve system reliability.</li></ul></div>
<div><b>Mandatory Requirements:</b><br>
<ul><li>Bachelor&rsquo;s degree in mechanical engineering.</li><li>5+ years of mechanical engineering experience in oil &amp; gas plants.</li><li>Knowledge of piping systems, valves, leak detection, and pressure equipment codes.</li><li>Familiar with API, ASME, and ISO standards.</li></ul></div></div></div><p></p>

R158 MECHANICAL ENGINEER

Mindstream

<p><b>Role:</b> QA/QC Mechanical Engineer (Piping &amp; Structural)<br/><b>Duration:</b> 1 Year &ndash; Extendable<br/><b>Location:</b> Ras Laffan, Qatar<br/><b>Salary:</b> Based on merit (Full package)</p><p><b>Requirements:</b></p><ul><li>Minimum experience in <b>Oil &amp; Gas projects within the GCC</b> (mandatory)</li><li>Strong expertise in <b>piping and structural works</b></li><li><b>Ras Laffan</b> project experience will be an added advantage</li></ul><p>Job Type: Full-time</p>

QA/QC Mechanical Engineer (Piping & Structural)

C2HR LLP

<p><b>Job Summary:</b><br/>We are looking for an experienced Mechanical &amp; Piping Engineer with extensive expertise in the design, installation, testing, and maintenance of GRP, FRP, CS, and SS piping systems in Oil &amp; Gas projects. The ideal candidate will have a minimum of 10 years&rsquo; experience, including proven involvement in QatarEnergy / QatarEnergy LNG projects. The candidate will be responsible for overseeing all piping-related engineering and construction activities, ensuring compliance with project specifications, international standards, and client requirements.</p><p><b>Key Responsibilities:</b><br/>- Plan, design, and supervise installation and testing of GRP, FRP, CS, and SS piping systems.<br/>- Review and approve piping design drawings, isometrics, and material specifications.<br/>- Ensure proper execution of pipe fabrication, welding, lamination, erection, and hydrotesting in compliance with project standards.<br/>- Conduct site inspections and ensure quality workmanship in line with client and international codes.<br/>- Prepare method statements, inspection &amp; test plans (ITPs), and other technical documentation.<br/>- Coordinate with QA/QC, HSE, and project teams to ensure safe and efficient execution of piping works.<br/>- Provide technical guidance and troubleshooting support during installation and commissioning phases.<br/>- Liaise with QatarEnergy / consultant representatives for approvals, inspections, and technical clarifications.<br/>- Ensure material control, traceability, and adherence to project specifications.<br/>- Participate in project meetings, progress reviews, and provide regular technical reports.</p><p><b>Qualifications &amp; Experience:</b><br/>- Bachelor&rsquo;s Degree in Mechanical Engineering or related discipline.<br/>- Minimum 10 years of experience in piping engineering and construction, specifically with GRP, FRP, CS, and SS piping systems.<br/>-Previous experience with QatarEnergy / QatarEnergy LNG projects is mandatory.<br/>- Strong knowledge of relevant international codes and standards (ASME, ASTM, API, AWWA, ISO, BS).<br/>- Experience in welding, lamination, coating, hydrotesting, and pipeline pre-commissioning works.Proficiency in AutoCAD, piping design software, and MS Office applications.<br/>- Excellent communication and technical report writing skills in English (Arabic is a plus).</p><p><b>Key Competencies:</b><br/>- Strong leadership and team coordination skills.Excellent problem-solving and decision-making abilities.<br/>- High attention to detail and commitment to quality.<br/>- Ability to work under pressure and meet project deadlines.<br/>- Strong interpersonal skills to manage subcontractors and liaise with clients.<br/>- Available in Qatar</p><p>Job Types: Full-time, Contract</p><p>Pay: QAR15,000.00 - QAR20,000.00 per month</p>

Mechanical & Piping Engineer -Oil & Gas projects.

Explore 628+ Principal piping engineer in Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar this November. Find roles across top companies and apply now to boost your career.

628 principal piping engineer jobs IN Qatar Moph License Jobs In Qatar Moph License Jobs In Qatar

Principal Piping Engineer

Principal Piping Engineer

Welding Engineer

Senior Production Engineer(Piping)

R158 MECHANICAL ENGINEER

QA/QC Mechanical Engineer (Piping & Structural)

Mechanical & Piping Engineer -Oil & Gas projects.