sales engineer Jobs in Al Khobar Saudi Arabia

sales engineer

planning engineer Jobs in Al Khobar Saudi Arabia

planning engineer

graduate chemical engineer (process) Jobs in Al Khobar Saudi Arabia

graduate chemical engineer (process)

instrument engineer Jobs in Al Khobar Saudi Arabia

instrument engineer

lead process quality engineer Jobs in Al Khobar Saudi Arabia

lead process quality engineer

process engineer

ENGIE

<div></div><div><div><div><div><div><div><p><b>PROCESS ENGINEER JD</b></p>
<p>
Role Purpose</p>
<p>
To optimise, control, and continuously improve the seawater reverse osmosis (SWRO) process at the Jubail 3B desalination plant. The Process Engineer ensures safe operations, strict HSE compliance, WPA contractual compliance, and accurate KPI monitoring and monthly invoicing via PASS. The role supports Operations, Maintenance, and Chemistry teams and carries delegated technical responsibilities from the O&amp;M Manager.</p><br>
<p></p>
<p>
Key Responsibilities</p><br>
<p></p>
<p>
1. Process Operations &amp; Performance Monitoring</p>
<ul><li>Monitor all operational KPIs: TA, CA, Load Factor, recovery, DP trends, flux, SPC (kWh/m&sup3;), SDI15, turbidity, pH, and chemical dosing, etc.</li></ul>
<ul><li>Conduct daily/weekly trend analysis and identify performance deterioration.</li></ul>
<ul><li>Lead technical root-cause investigations for plant trips, pretreatment issues, membrane fouling, and SDI excursions.</li></ul>
<ul><li>Plan and evaluate CIP activities, including chemistry selection, cleaning setpoints, and post-CIP performance verification.</li></ul>
<ul><li>Optimise pretreatment performance (coagulation, filtration, cartridge filters), ensuring stable RO feed quality.</li><li>Perform RO membrane normalization recording, trending, and analysis to detect early fouling, scaling, or performance deviation.</li></ul><br>
<p></p>
<p>
2. WPA Compliance &amp; Contractual Performance</p>
<ul><li>Ensure complete adherence to the Water Purchase Agreement (WPA), including operational, quality, performance, and reporting requirements.</li></ul>
<ul><li>Monitor SDI, turbidity, water quality, and compliance parameters.</li></ul>
<ul><li>Participate in outage classification and ensure strict application of WPA definitions (Planned, Forced, NPE, FM/WTTCO).</li></ul>
<ul><li>Support monthly performance reports submitted to AJIWC/SWPC, ensuring traceability and accuracy.</li></ul>
<ul><li>Identify risks for LDs and advise management with proper justification.</li></ul><br>
<p></p>
<p>
3. Invoicing &amp; PASS (Plant Availability &amp; Settlement System)</p>
<ul><li>Prepare and validate all process inputs for monthly invoicing in PASS.</li></ul>
<ul><li>Verify outages, TA/CA calculations, availability hours, deemed production, and supporting evidence.</li></ul>
<ul><li>Ensure all PASS submissions fully align with WPA formulas and time-stamps.</li></ul>
<ul><li>Coordinate internally with Finance, Ops, and Maintenance to achieve 100% invoicing accuracy.</li></ul><br>
<p></p>
<p>
4. HSE Responsibilities (Critical for the Role)</p>
<ul><li>Ensure compliance with all ENGIE and plant HSE procedures and Life-Saving Rules.</li></ul>
<ul><li>Participate in hazard identification, risk assessments (HAZID, HAZOP), and HSE audits.</li></ul>
<ul><li>Ensure safe chemical handling, storage, dosing, and spill-response practices.</li></ul>
<ul><li>Maintain strict compliance with environmental discharge permits, water quality limits, and regulatory reporting.</li></ul>
<ul><li>Support incident investigation and provide process input to safety-related events.</li></ul>
<ul><li>Ensure laboratory and water sampling activities meet safety and quality standards.</li></ul>
<ul><li>Promote a strong safety culture among operators and chemists.</li></ul><br>
<p></p>
<p>
5. Process Engineering &amp; Technical Support</p>
<ul><li>Review and update PFDs, P&amp;IDs, mass balance, design criteria, and operating limits.</li></ul>
<ul><li>Provide technical support during shutdowns, maintenance activities, and equipment upgrades.</li><li>Contribute to annual process and laboratory budgeting by identifying operational needs, forecasting chemical and consumable requirements, and supporting cost-optimization initiatives across pretreatment, RO, and water quality programs.</li></ul>
<ul><li>Evaluate membrane performance, scaling/fouling indicators, and develop recovery actions.</li></ul>
<ul><li>Interface with vendors for membranes, chemicals, media, filters, analyzers, and ERD/HP pump support.</li></ul>
<ul><li>Support commissioning and start-up activities for RO/pretreatment equipment.</li></ul><br>
<p></p>
<p>
6. Chemistry &amp; Environmental Compliance</p>
<ul><li>Maintain stable and compliant water chemistry for pretreatment, RO, and post-treatment.</li></ul>
<ul><li>Oversee chemical dosing optimisation to reduce cost while ensuring stability and compliance.</li></ul>
<ul><li>Lead process and chemistry audits (internal, environmental, and customer audits).</li></ul>
<ul><li>Develop improvements in water quality, membrane longevity, and chemical usage efficiency.</li></ul><br>
<p></p>
<p>
7. Reporting &amp; Documentation</p>
<ul><li>Prepare monthly performance sections for management and client reports.</li></ul>
<ul><li>Maintain proper logs, environmental reports, water-quality records, and trend files.</li></ul>
<ul><li>Ensure high-quality documentation for events, RCA, PASS evidence, and compliance reporting.</li></ul>
<ul><li>Prepare, revise, and update Standard Operating Procedures (SOPs), Work Instructions, and process guidelines whenever operational, safety, or contractual changes require it.</li></ul><br>
<p></p>
<p>
8. Team Collaboration &amp; Delegated Duties</p>
<ul><li>Provide guidance to operators and chemists on process operations, troubleshooting, and safety.</li></ul>
<ul><li>Lead daily performance discussions when delegated by the O&amp;M Manager.</li></ul>
<ul><li>Represent the plant in technical meetings, vendor visits, or customer interactions as required.</li></ul>
<ul><li>Provide training for junior engineers, chemists, and operations staff.</li></ul><br>
<p></p>
<p>
Qualifications &amp; Experience</p><br>
<p></p>
<p>
Education</p>
<ul><li>Bachelor&rsquo;s Degree in Chemical Engineering, Environmental Engineering, Mechanical Engineering, or Water Treatment Technology.</li></ul><br>
<p></p>
<p>
Experience</p>
<ul><li>5&ndash;10 years experience in desalination process engineering, with strong focus on SWRO.</li></ul>
<ul><li>Experience in start-up, commissioning, or troubleshooting of RO plants preferred.</li></ul>
<ul><li>Familiarity with WPA/contractual frameworks is an advantage.</li></ul>
<p>
Skills</p>
<ul><li>Strong analytical skills in RO performance, water chemistry, and hydraulic/process calculations.</li></ul>
<ul><li>Strong HSE awareness and proven safety performance.</li></ul>
<ul><li>Ability to interpret PFDs, P&amp;IDs, mass balance, and design documents.</li></ul>
<ul><li>Excellent communication (English mandatory; Arabic an advantage).</li></ul>
<ul><li>Strong documentation, reporting, and data analysis capability.</li></ul>
</div></div></div></div><div></div><div><div><div><div><b>Business Unit: </b>GBU Renewables &amp; Flexible Power
</div></div></div></div><div><div><div><div><b>Division: </b>GEN International - KSA
</div></div></div></div><div><div><div><div><b>Legal Entity: </b>Engie Al Jubail for Operation &amp; Maintenance Company
</div></div></div></div><div><div><div><div><b>Professional Experience: </b>Skilled ( &gt;3 experience &lt;15 years)
</div></div></div></div><div><div><div><div><b>Education Level: </b>Bachelor's Degree
</div></div></div></div><div><div><div><div><b>Company Name: </b>ENGIE Saudi Arabia
</div></div></div></div><div><div><div><p>Why this matters to us</p>
<p>Our organisation is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We offer reasonable accommodations upon request for individuals with disabilities.</p></div></div></div></div></div>

Process Engineer

Penspen

<div><div><p>Penspen www.penspen.com are currently looking for Senior Process Engineer(Asset integrity) in Al Khafji location in KSA.</p>
<p><b>
Main Purpose of Role:
</b></p><p>Core Engineering Role to produce the volume of engineering activities on projects and within the business as required.</p>
<p><b>
Qualifications:
</b></p><ul><li>Minimum Bachelor&rsquo;s Degree in Chemical or Process Engineering.</li>
</ul>
<p><b>Knowledge / Experience (Skills):</b></p>
<p><b>
Essential</b></p>
<ul>
<li>12 years of experience; 8 years of them within the field of Process Engineering for major Oil and Gas/Petrochemical projects. Asset Integrity project experience is mandatory</li>
</ul>
<p><b>Advantage</b></p>
<ul>
<li>Previous experience in Saudi Region</li>
</ul>
<p><b>Technical Knowledge and Skills (Discipline Specific):</b></p>
<ul>
<li>Knowledge of basic engineering processes</li>
<li>Familiarity with international codes, standards and engineering practices (Saudi Aramco standards exposure is advantageous)</li>
<li>Must be familiar with all aspects of design from concept to detailed design</li>
<li>Technical analysis of engineering problems</li>
<li>Development of Process Flow Diagrams and Piping and Instrumentation Diagrams.</li>
<li>Hysys Simulation and H&amp;MB development</li>
<li>Must have a ability to prepare engineering deliverables as per company technical competency standards</li></ul><br>
<p></p>
<p>
If you have the skills and are interested to apply, please share the CV by clicking this</p>
<p>
URL - https://careers.penspen.com/vacancy/senior-process-engineer-590044.html#hs_show_apply_popup=true</p>
<p>
#LI-AS2</p></div></div>

Senior Process Engineer - Asset Integrity

GE Vernova

<div><div><div>The Process Quality Engineer (PQE) for Nozzle and Shroud Repair plays a critical role in elevating both process and product quality by driving defect reduction across repair operations. This position demands close collaboration with salaried and hourly team members to embed quality principles throughout every stage of the repair process. To effectively support leadership, the PQE must cultivate deep expertise in Quality Management Systems (QMS), ensuring compliance while championing continuous improvement and operational excellence.<p></p><h1 class="jobSectionHeader"><b>
Job Description</b></h1><p><b>
What you'll do:</b></p><ul><li>
Fulfilment-5 Metrics: Operationalize and sustain quality metrics, including Web CRT compliance, RCA/RCI cycle, and CoPQ tracking, to ensure consistent quality standards are met.</li><li>
Zero Exception Culture: Promote and sustain a culture of 'zero exceptions' in quality, ensuring operations comply with both regulatory and non-regulatory standards by engaging with shop floor operators regularly.</li><li>
QMS Compliance: Assist the operations team in operationalizing and ensuring adherence to QMS procedures specific to Combustion Liner, Transition Piece and CAP Repair.</li><li>
Defect Reduction: Lead projects aimed at reducing defects and work collaboratively with EHS and Engineering teams to promptly address and resolve shop floor quality issues.</li><li>
On-Time Delivery: Facilitate on-time delivery by eliminating rework loops caused by quality issues affecting First Pass Yield (FPY).</li><li>
Quality Initiatives: Champion quality initiatives and projects focused on reducing the Cost of Poor Quality (CoPQ) within the repair cell.</li><li>
5S Lean Implementation: Promote and implement 5S Lean initiatives to enhance efficiency and organization within the repair cell.</li><li>
Audits and CAPA: Conduct assigned audits and develop effective Corrective and Preventive Actions (CAPA) plans to address identified issues.</li><li>
Training Support: Support training activities for new employees or during job changes in compliance with the GEMTEC training verification process.</li><li>
Own all aspects of quality, including both quality assurance and quality control. This includes product and service quality, manufacturing process conformance, incoming goods inspection, product verification, and witness points.</li><li>
Maintain GEMTEC quality MOR inputs and cell bowler metrics.</li><li>
Support setup of new lean production lines and improve existing ones from a quality perspective.</li><li>
Ensure engineering designs and technical documentation are complete, accurate, and compliant with customer and end-user requirements.</li><li>
Lead QA/QC activities for Nozzle and shroud repair lines.</li></ul><p></p><p><b>
What you'll bring:
</b></p><ul><li>Bachelor&rsquo;s degree in engineering from an accredited university or college.</li><li>
Minimum 5 years&rsquo; experience in technical or operational/production role.</li><li>
Active listening skills and effective English communication.</li><li>
Strong proficiency in Microsoft Office applications.</li></ul><p></p><p><b>
What will make you stand out:</b></p><ul><li>
Master&rsquo;s degree in Industrial, Mechanical or a related technical field preferred.</li><li>
Prior experience with Lean Manufacturing is preferred.</li><li>
Minimum of 2 years of experience in quality management systems and ISO 9001 requirements.</li><li>
Six Sigma training is preferred.</li><li>
Prior experience with Lean Manufacturing is preferred.</li><li>
Six Sigma training is preferred</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Ability to analyze problems, identify root causes and provide efficient solutions</li><li>
Strong organizational skills</li><li>
Ability to handle diverse activities simultaneously</li><li>
Proactive mindset with a high level of integrity.</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Team player with effective cross-functional communication abilities.</li><li>
Willingness to work in challenging environments as needed.</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Team player with effective cross-functional communication abilities.</li><li>
Willingness to work in challenging environments as needed.</li></ul><p></p><h1 class="jobSectionHeader"><b>
Additional Information</b></h1><div><div><div><div><div><div><div><p><b>
Relocation Assistance Provided: </b>Yes</p></div></div></div></div></div></div></div></div></div></div><p></p>

Lead Process Quality Engineer

<p></p><div><div><div><div><div><p><b>OVERVIEW:
</b></p><p>The graduate chemical/process engineer will be part of the engineering team in KSA but work closely with the process team based in our MENA office. Your journey will start with a 3-months onsite training program at our state-of-the-art testing facility at Flotta (UK) and 2 weeks at the NOV Process Systems HQ offices in Oslo (Norway). This will require an eagerness to learn and showcase your ability to develop technical skills.
</p><p>Once initial training is completed you will be part of the engineering team in KSA but work closely with the process team based in our MENA office. Your tasks will take place both onshore and offshore globally and could potentially involve extensive travel.
</p><p>You will be involved with projects in our mobile testing facility, where you will take part in the construction, installation, operation and removal of process equipment. You will also undertake laboratory analysis, studies and experiments. Training will be provided, highlighting the need for an individual with keen learning capabilities.
</p><p>Key to this role will be your attention to detail, communications skills, both spoken and written and the ability to work effectively with other team members.
</p><p>An appreciation of the commercial implications of engineering and chemistry decision making, with a keen focus on delivery and a proactive approach throughout projects are critical to your success in this role.
</p><p>You will be keen to take on fresh challenges, develop your technical and interpersonal skills as well as expand your knowledge and experience through the variety of projects and training.<br>
</p></div></div><br>
<p></p><div><div><p><b>DUTIES &amp; RESPONSIBILITIES:<br>
</b></p><p></p><ul><li>Provide technical support on a wide range of enquiries and projects for external and internal clients.
</li><li>Undertake service, consultancy and laboratory-based studies as may be required by the Company, both at KSA and clients base which may onshore or offshore globally.
</li><li>Assist with the preparation and costing of proposals.
</li><li>Assist with the preparation and review of technical reports.
</li><li>Support the senior staff to develop the site service activities of the Company according to an agreed marketing plan and budget.
</li><li>Assist with the development and implementation of laboratory techniques and methods.
</li><li>Undertake relevant research work as may be deemed necessary for the benefit of the Company.
</li><li>Help ensure that the laboratory is kept stocked with sufficient equipment, materials and consumables as required to undertake the ongoing projects.
</li><li>Ensure all work is carried out in a safe and competent manner and abides by all relevant HSE regulations and maintain a high standard of housekeeping in the work area and department.
</li><li>Ensure a high standard of professionalism is maintained when representing NOV.
</li><li>Be fully familiar and fully conversant with department and company policies, procedures and processes, ensuring all work and actions undertaken are in full compliance at all times.
</li><li>Support other departments and carry out other duties as and when business requirements.
</li>Global travel as and when required<br>
<li>
</li></ul><p></p><p><b>SKILLS &amp; EXPERIENCE REQUIRED:<br>
</b></p><p></p><p><b>STRATEGIC
</b></p><ul><li>Able to understand, evaluate and apply technical information (Functional &amp; Technical)
</li><li>Able to quickly learn the portfolio of available tools and techniques and apply knowledge, understanding and problem solving (Technical learning)
</li><li>Capable of keeping abreast of an evolving portfolio of products and services (Technical learning)
</li></ul><p><b>OPERATING SKILLS
</b></p><ul><li>Adept at exercising good judgement (sometimes with incomplete information) whilst being constrained by tight deadlines (Timely decision making)
</li><li>Able to apportion time effectively to complete tasks (Time management)
</li><li>Be willing to provide colleagues with the information they need to complete their tasks and eliminate obstacles (Informing others)
</li><li>Be quick to identify critical information and respond appropriately (Priority setting)
</li></ul><p><b>ENERGY
</b></p><ul><li>Will be energised by challenges and drawn towards opportunities (Action oriented)
</li></ul><p><b>ORGANISATIONAL
</b></p><ul><li>Confident and professional when representing the company in person and in writing (Presentation skills/written communications)
</li><li>Can undertake multiple activities and resources to accomplish a goal (Organising)
</li></ul><p><b>PERSONAL AND INTERPERSONAL
</b></p><ul><li>Strong sense of customer focus (internal/external) (Customer focus)
</li><li>A candid team player who collaborates with peers to solve problems (Peer relationships)
</li>Committed to self-improvement and development through the role to achieve career goals (Self development)<br>
<li>
</li></ul></div></div><br>
<p></p><div><div><br>
<p><b>Quality
 </b></p></div><div><b>Essential </b></div><div><b>Desirable
</b></div></div><br>
<div><div><b>Qualifications:
</b></div><div><ul><li><p>Tertiary education in chemical/process engineering<br>
</p></li></ul></div></div><br>
<p></p><div><div><b>Experience:
</b></div><div><ul><li>Knowledge of Oil and Gas process technology
</li></ul></div><div><ul><li>Technical experience within the oil, water, waste or alternative energy industries
</li></ul></div></div><br>
<div><div><b>Skills, training or special knowledge:
</b></div><div><ul><li><p>Computer literacy<br>
</p></li></ul></div></div><br>
</div></div><p></p><div><div><div><div><b>Quality Assurance
</b></div><div><p>Carry out all duties in accordance with the Quality Assurance procedures and department/area work instructions.
</p><p>Contribute to general improvements in the quality and key activities of the department/area.<br>
</p></div></div><br>
<div><div><b>Training </b></div><div>Participate in training where required or as approved for job role development
</div></div><br>
<div><div><b>Health, Safety and Environment
</b></div><div><p>Carry out all duties safely and in accordance with the Health &amp; Safety Policy, Employee Handbook, procedures, training and instruction.
</p><p>To be safety conscious and report any safety hazards to the HSE representative.</p></div></div></div></div></div><p></p>

Graduate Chemical Engineer (Process)

GLOBAL INFRA SERVICES

<p>Urgently Required Production Engineer at Jubail</p><p>Experience-15 years&rsquo; experience at polystyrene field (including EPS, HIPS and GPPS)</p><p>Salary - Negotiable</p><p>&middot; Educational Qualification&mdash;Bachelor&rsquo;s Degree in Engineering</p><p>&middot; Good technical knowledge of petrochemical operations.</p><p>&middot; Good knowledge of related health, safety and environmental regulations.</p><p>&middot; Capable of handling multiple tasks.</p><p>&middot; Strong interpersonal communication skills.</p><p>&middot; Ability to continuously drive for process improvement.</p><p>&middot; Ability to work under pressure and meet tight deadlines.</p><p>Strong commands of oral and written English.</p><p>Location-Jubail</p><p>&middot; Job Responsibility-Review and audits materials &amp; energy balance to identify plant/process efficiency, Yields &amp; Losses.</p><p>&middot; Preparing the Daily/Monthly/Quarterly/Yearly Production Reports.</p><p>&middot; Complete the monthly closing in the SAP.</p><p>&middot; Carry out all the SAP transactions (Purchase Requisition, Purchase Order, Good Receipt and Service Entry Sheet).</p><p>&middot; Assures that the unit is operated within the operating design limits, product quality meets the specification, and corrective actions are taken for any quality deviation.</p><p>&middot; Ensure unit parameters are optimized to achieve plant KPI&rsquo;s.</p><p>&middot; Participate in all the technical studies and make feasibility studies for the plant projects.</p><p>&middot; Coordinates with supporting Departments to resolve deficiencies/bottlenecks and improves plant performance and reliability.</p><p>&middot; Monitor and review the sustainability parameters and provide technical solution in case of deviation and issuing the sustainability report.</p><p>&middot; Reviews technical reports / change proposals and vendor reports for implementation towards improvements.</p><p>&middot; Support EHSS / quality coordinator to investigate QI&rsquo;s.</p><p>Interested Candidate can apply with updated CV to</p><p>Kindly mention following details.</p><p>(1) Your current Salary</p><p>(2) Expected Salary</p><p>(3) Notice Period</p><p>(4) Your Current Location</p><p>(5) Your valid Mobile #</p><p>(6) Your Nationality</p><p>Job Type: Full-time</p><p>Pay: &#65020;2,000.00 - &#65020;20,000.00 per month</p>

Production Engineer

Worley

<div><p><b>Building on our past. Ready for the future
</b></p><p>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
</p><p><b>Responsibilities
</b></p><ul><li><p>Review process design package, calculations, process scheme and vendor documentation
</p></li><li><p>Supervision of subcontract activities at Site on behalf of Client.
</p></li><li><p>Support Client in routine project proceedings and activities
</p></li><li><p>Progress report, tracking etc.
</p></li><li><p>Perform field inspections and site assessments to support the design and installation of fire protection systems, including sprinklers, fire alarms, suppression systems, and fire pumps.
</p></li><li><p>Review and interpret engineering drawings, specifications, and applicable fire codes (e.g., NFPA, IBC, IFC).
</p></li><li><p>Coordinate with project managers, design engineers, contractors, and local authorities to ensure compliance and timely project execution.
</p></li><li><p>Conduct system testing and commissioning, including hydrostatic tests, alarm verification, and functional performance checks.
</p></li><li><p>Assist with troubleshooting and resolving field issues related to fire protection equipment and installation.
</p></li><li><p>Document field reports, as-built conditions, and inspection results with accuracy and clarity.
</p></li><li><p>Support AHJ (Authority Having Jurisdiction) inspections and witness acceptance testing.
 </p></li></ul><p><b>Required:
</b></p><ul><li>A recognized degree in the relevant engineering discipline or equivalent.
</li><li>Certified and Saudi Aramco approved
</li></ul><p><b>Preferred:
</b></p><ul><li>Undertaking Chartered Professional Engineer (CPEng) status.
</li></ul><p><b>Moving forward together
</b></p><p>We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
</p><p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
</p><p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
</p><p>Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></div>
<br><ul><li>Undertaking Chartered Professional Engineer (CPEng) status.</li><li>
Support AHJ (Authority Having Jurisdiction) inspections and witness acceptance testing.</li><li>
Document field reports, as-built conditions, and inspection results with accuracy and clarity.</li><li>
Assist with troubleshooting and resolving field issues related to fire protection equipment and installation.</li><li>
Conduct system testing and commissioning, including hydrostatic tests, alarm verification, and functional performance checks.</li></ul>

Senior Field Engineer Fire Protection

ALI A. AL-ZAYER & PARTNER CO

<p><b>Job Summary</b></p><p>The Process Performance Engineer is a mid-level professional responsible for the routine technical evaluation, monitoring, and troubleshooting of unit operations. This role focuses on ensuring that all processing units and utilities operate efficiently, meet performance targets, and adhere to environmental and safety standards. The engineer will provide regular technical analysis and support to the Operations team.</p><p><b>Key Responsibilities and Scope of Evaluation</b></p><p>The successful candidate will focus on the performance monitoring and evaluation of the following critical units and systems:</p><p><b>I. Core Processing &amp; Conversion Units</b></p><ul><li><b>Routine Performance Monitoring:</b> Track and evaluate daily performance, yields, and key operating parameters for major units including:</li><li><b>Distillation:</b> CDU+VDU (Crude &amp; Vacuum Distillation)</li><li><b>Hydroprocessing:</b> LP HDS, HP HDS, NHDT (Naphtha Hydrotreating)</li><li><b>Conversion:</b> CCRU-131 (Catalytic Reformer), FCC U-61 (Catalytic Cracking), MHC U-051 (Mild Hydrocracker), DCU U-21 (Delayed Coker)</li><li><b>Troubleshooting Support:</b> Provide first-level analysis and technical support to resolve operational deviations and identify root causes for routine performance dips.</li></ul><p><b>II. Treating, Recovery, and Specialties</b></p><ul><li><b>Efficiency Analysis:</b> Conduct regular material and energy balance checks for gas, treating, and recovery units:</li><li><b>Sulfur &amp; Treating:</b> SGP (Saturated Gas Plant), AMINE REG, SRU (Sulfur Recovery), SWS (Sour Water Stripper), SAR (Sulfuric Acid Recovery).</li><li><b>Specialty Units:</b> BENZ EX 141 (Benzene Extraction), PARAXYLENE U-301, ALKY UNIT (Alkylation).</li><li><b>Compliance Review:</b> Monitor unit performance against environmental permits and internal specifications, particularly for flare (FL) and waste (WW) stream compositions.</li></ul><p><b>III. Utilities and Infrastructure</b></p><ul><li><b>Reliability Monitoring:</b> Evaluate the operational status and efficiency of critical utility systems:</li><li>DHC U-041 (Hydrogen Production) and HPU &amp; PSA (Off-gas Pressure Swing Absorber).</li><li>CW (Cooling Towers), WW (Water Treatment), BFW (Boiler Feed Water), N2 &amp; DM (Nitrogen &amp; DEMIN System), Boiler.</li><li><b>Data Analysis:</b> Compile and analyze operational data from Tank Forms, Coke Handling (661), and SLF (Storage loading Facility) to support inventory and throughput planning.</li></ul><p>Job Types: Full-time, Contract<br/>Contract length: 12 months</p>

Senior Engineer - Operations

Explore 145+ Process engineer in Al Khobar Saudi Arabia this January. Find roles across top companies and apply now to boost your career.