production engineer

Napco National

<div>
 
 Job Description
 
 
 
 
 Job Responsibilities &amp; Tasks:
 
 
 
 <ul>
 <li>
 Ensure the correct manning per machine &amp; fill the manpower shortage to ensure proper implementation of the daily production planning.
 </li>
 <li>
 Review the daily production reports and ensure their correctness in order to enable a proper handover and transfer of information during the shift change.
 </li>
 <li>
 Supervise and ensure the machine run-ability during trials/production &amp; report any non-conformities of raw material.
 </li>
 <li>
 Follow up on the team to ensure minimum waste and maximum efficiency
 </li>
 <li>
 Submitting/ Approving his team requests on pulse (Leaves, Sick leaves, Loans, etc.&hellip;.)
 </li>
 <li>
 Monitor the best size change flow cycle
 </li>
 <li>
 Assign tasks and deadlines for the production team and follow up achievements of set goals.
 </li>
 <li>
 Manage &amp; guide the production team to work safely &amp; effectively while maintaining tidy and clean plant premises.
 </li>
 <li>
 Ensure all hygiene procedure including &ldquo;hairnet, mask, gloves, hand sanitization) are being implemented correctly all the time on the floor.
 </li>
 <li>
 Secure a proper preventive maintenance on all machines in coordination with the Maintenance Department and Corrective repair orders / Workshop repair orders
 </li>
 <li>
 Ensure the application of all quality procedures in coordination with the QC Department.
 </li>
 <li>
 Evaluate the performance of his staff &amp; suggest the appropriate incentive and training program.
 </li>
 <li>
 Responsible for complying with integrated management system requirements.
 </li>
 <li>
 Responsible with alignment with HSSE team for updating the HIRA and to ensure hazard &amp; risk are adequately identified and documented
 </li>
 <li>
 Responsible with alignment with HSSE team for updating the aspect/impact and to ensure all the aspect/impact are adequately identified and documented
 </li>
 <li>
 Consultation and participation at all applicable levels and functions (ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&amp;S management system).
 
 
 </li>
 </ul>
 
 Internal
 
 
 
 
 Job Dynamics &amp; Interfaces:
 
 
 
 Technical Development Department, QC Department, Maintenance Department, Safety Department, Maintenance Department, Supply Chain Department, and PID Department.
 
 
 
 External
 
 
 
 Machinery suppliers.
 
 
 
 Required Job Qualifications &amp; Competencies
 
 
 
 
 Education &amp; Experience
 
 
 
 <ul>
 <li>
 Engineering or Technical Degree.
 </li>
 <li>
 Fresh Graduate or 2 years&rsquo; experience in similar and related field.
 
 
 </li>
 </ul>
 
 Special Working Conditions
 
 
 
 <ul>
 <li>
 Ability to handle multitasks.
 </li>
 <li>
 Work in Plant / Manufacturing Environment.
 </li>
 </ul>
</div>

PRODUCTION ENGINEER

HMT LLC

<div>
 
 Plant Quality Engineer
 
 
 
 
 Overview:
 
 
 The Plant Quality Engineer is responsible for ensuring that all products and processes within the manufacturing plant meet internal, customer, and regulatory quality standards. This role involves process development, data analysis, audits, and continuous improvement to support operational excellence and compliance in a Saudi industrial environment.
 
 
 
 
 Key Responsibilities:
 
 
 
 <ul>
 
 <li>
 Develop, implement, and maintain quality control processes, procedures, and documentation for incoming materials, in-process production, and finished products
 </li>
 
 <li>
 Conduct inspections and tests according to Inspection and Test Plans (ITPs) and ensure all quality documentation is up to date and compliant with project and regulatory requirements
 </li>
 
 <li>
 Collect, analyze, and summarize process and product data; prepare and submit regular quality reports to senior management
 </li>
 
 <li>
 Lead root cause analysis and corrective/preventive action teams to resolve quality issues related to customer complaints, supplier non-conformance, and internal production problems
 </li>
 
 <li>
 Participate in internal and external audits, and follow up on non-conformity reports to ensure timely closure and continuous improvement
 </li>
 
 <li>
 Review and update quality assurance procedures, work instructions, and operational policies to align with ISO 9001 and other relevant standards3.
 </li>
 
 <li>
 Monitor calibration and maintenance of testing and measuring equipment to ensure accuracy and compliance with standards
 </li>
 
 <li>
 Train plant staff on quality standards, inspection techniques, and best practices to promote a culture of quality and safety
 </li>
 
 <li>
 Coordinate with procurement, engineering, production, and logistics teams to address quality issues and ensure seamless operations
 </li>
 
 <li>
 Ensure compliance with Saudi health, safety, and environmental regulations, as well as industry-specific standards
 </li>
 
 </ul>
 
 
 
 Qualifications and Skills:
 
 
 
 <ul>
 
 <li>
 Bachelor&rsquo;s degree in Engineering (Mechanical, Industrial, Chemical, or related field)
 </li>
 
 <li>
 Minimum 5&ndash;7 years of experience in quality engineering, preferably in a manufacturing or industrial plant environment in Saudi Arabia
 </li>
 
 <li>
 Strong knowledge of quality management systems (e.g., ISO 9001), statistical process control, and root cause analysis
 </li>
 
 <li>
 Experience with quality tools such as PPAP, APQP, MSA, and SPC is highly desirable
 </li>
 
 <li>
 Proficiency in data analysis, report writing, and use of Microsoft Office and quality management software
 </li>
 
 <li>
 Excellent communication, teamwork, and leadership skills; fluency in English required, Arabic is an advantage
 </li>
 
 <li>
 Strong attention to detail, problem-solving skills, and ability to work under pressure
 </li>
 
 <li>
 Knowledge of Saudi regulatory compliance and industry-specific standards is a plus
 </li>
 
 </ul>
 
 
 
 We Offer:
 
 
 
 <ul>
 
 <li>
 Opportunity to work for the global leader of above ground fuel storage industry and develop your career further
 </li>
 
 <li>
 Ongoing industry training and certifications i.e. health and safety etc.
 </li>
 
 <li>
 Competitive remuneration and benefits as per local law
 </li>
 
 <li>
 High-end equipment
 </li>
 
 </ul>
 
 
 Are you excited about joining a highly diverse international team and the prospect of contributing to an industry-leader in emissions-mitigation equipment for aboveground storage tanks? We will be excited to receive your CV and motivation letter.
 
 
 
 About HMT:
 
 
 HMT is the world leader in emissions-mitigation equipment for aboveground storage tanks. Our agile team enables owners and operators to help them meet a full range of storage and environmental challenges, including emissions reduction, tank capacity optimization, and inventory utilization. We engineer tank systems that exceed safety standards, reduce downtime, extend maintenance intervals and, most importantly, protect the environment.
 
</div>

Plant Quality Engineer

<div>
 
 
 About HMT
 
 
 
 
 HMT is the world leader in emissions-mitigation equipment for aboveground storage tanks. Our agile team enables owners and operators to help them meet a full range of storage and environmental challenges, including emissions reduction, tank capacity optimization, and inventory utilization. We engineer tank systems that exceed safety standards, reduce downtime, extend maintenance intervals and, most importantly, protect the environment.
 
 
 
 
 The Role
 
 
 
 
 To perform in-process and final quality inspections to ensure that production activities comply with defined quality standards, technical drawings, and applicable customer and regulatory requirements. The Process Quality Control Technician supports continuous improvement and helps prevent nonconformities by identifying process deviations early.
 
 
 
 
 Key Responsibilities:
 
 
 
 <ul>
 
 <li>
 Perform in-process, and final, quality control inspections.
 </li>
 
 <li>
 Provide support for incoming inspections when necessary, in coordination with the receiving and quality teams.
 </li>
 
 <li>
 Monitor production activities to ensure compliance with process and quality requirements.
 </li>
 
 <li>
 Interpret and verify technical drawings, including GD&amp;T specifications.
 </li>
 
 <li>
 Use standard measuring tools such as calipers, micrometers, height gauges, and go/no-go gauges accurately.
 </li>
 
 <li>
 Record inspection data and maintain traceable quality documentation in accordance with ISO 9001 requirements.
 </li>
 
 <li>
 Identify, document, and communicate nonconformities and deviations promptly.
 </li>
 
 <li>
 Support root cause analysis and corrective/preventive actions (CAPA) for quality issues.
 </li>
 
 <li>
 Ensure that nonconforming materials are properly segregated and labeled.
 </li>
 
 <li>
 Collaborate with production, engineering, and quality teams to improve processes and reduce defects.
 </li>
 
 </ul>
 
 
 
 What We Are Looking For
 
 
 
 <ul>
 
 <li>
 Minimum high school diploma or technical vocational school degree in Mechanical, Industrial, or Manufacturing Technology.
 </li>
 
 <li>
 At least 2 years of experience in process quality control, preferably in the aluminum or metalworking industry.
 </li>
 
 <li>
 Proficiency in reading and interpreting mechanical drawings and specifications.
 </li>
 
 <li>
 Familiarity with Geometric Dimensioning and Tolerancing (GD&amp;T).
 </li>
 
 <li>
 Working knowledge of standard measurement instruments.
 </li>
 
 <li>
 Hands-on experience with basic metal fabrication processes such as cutting, drilling, and assembly.
 </li>
 
 <li>
 Basic understanding of ISO 9001:2015 quality management system principles.
 </li>
 
 <li>
 Exceptional documentation practices and attention to detail.
 </li>
 
 <li>
 Experience using&nbsp;Excel, Word, and quality reporting systems.
 </li>
 
 <li>
 Excellent command of English, with fluency in Arabic being a strong plus.
 </li>
 
 <li>
 Experience working in an ISO 9001 certified environment.
 </li>
 
 <li>
 Knowledge of control plans and inspection checklists.
 </li>
 
 <li>
 Understanding of welding, machining, and surface treatment processes.
 </li>
 
 <li>
 Familiarity with NCR systems.
 </li>
 
 </ul>
 
 
 
 We Offer
 
 
 
 <ul>
 
 <li>
 Opportunity to work for the global leader of above ground fuel storage industry and develop your career further.
 </li>
 
 <li>
 Ongoing industry training and certifications i.e. health and safety etc.
 </li>
 
 <li>
 International and local traveling.
 </li>
 
 <li>
 Competitive remuneration and benefits as per local law, including housing allowance, car allowance, mobile allowance, medical insurance, etc.
 </li>
 
 <li>
 22 days&nbsp;annual leave entitlement in addition to&nbsp;leave entitlement on religious holidays.
 </li>
 
 <li>
 High-end equipment (laptop and mobile).
 </li>
 
 </ul>
 
 
 
 Are you excited about joining a highly diverse international team and the prospect of contributing to an industry-leader in emissions-mitigation equipment for aboveground storage tanks? We will be excited to receive your CV and motivation letter.
 
 
</div>

Quality Technician (Saudi Arabia)

Matar Holding company

<div>
 
 Job Summary
 
 
 
 We are seeking a dedicated Project Incharge / Site Engineer to oversee and manage site installation projects, with a specific focus on HVAC systems and coils. The successful candidate will be responsible for ensuring that all mechanical installations are executed according to approved technical drawings, quality standards, and safety regulations while maintaining strict project timelines.
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Project Site Planning &amp; Coordination:
 </li>
 <ul>
 <li>
 Thoroughly review and interpret project drawings, specifications, and the scope of work
 </li>
 <li>
 Develop and monitor detailed installation schedules and timelines
 </li>
 <li>
 Coordinate effectively with clients, subcontractors, technical teams, and internal production departments to ensure seamless execution
 </li>
 </ul>
 <li>
 Site Supervision &amp; Management:
 </li>
 <ul>
 <li>
 Directly oversee the on-site installation of HVAC coils and related mechanical components
 </li>
 <li>
 Ensure all field work complies with approved engineering standards and safety protocols
 </li>
 <li>
 Supervise and provide technical guidance to technicians, laborers, and subcontractors
 </li>
 </ul>
 <li>
 Quality Control &amp; Compliance:
 </li>
 <ul>
 <li>
 Monitor the quality of all installation work through regular on-site inspections
 </li>
 <li>
 Ensure strict adherence to local codes, NFPA/ASME standards, and regulatory requirements
 </li>
 <li>
 Identify and rectify any installation defects or deviations from specifications
 </li>
 </ul>
 <li>
 Documentation &amp; Client Relations:
 </li>
 <ul>
 <li>
 Maintain accurate daily, weekly, and monthly progress reports
 </li>
 <li>
 Document all site activities, including changes or deviations from the original plan
 </li>
 <li>
 Act as the primary point of contact for clients regarding project updates and concerns
 </li>
 <li>
 Manage final inspections, testing, and documentation for project handover
 
 
 </li>
 </ul>
 </ul>
 
 Requirements
 
 
 
 
 
 Required Qualifications &amp; Skills
 
 
 
 
 <ul>
 <li>
 Education: Bachelor's Degree or Diploma in Mechanical Engineering
 </li>
 <li>
 Experience: 6-7 years of proven experience in site installation, specifically within HVAC or mechanical systems
 </li>
 <li>
 Technical Skills: Ability to read and understand complex engineering schematics and layouts
 </li>
 <li>
 Logistics: Valid KSA Driving License is required
 </li>
 <li>
 Availability: Transferable Iqama is preferred
 </li>
 </ul>
</div>

Project In charge - Site Engineer

Al- Othman Holding Company

<div>
 
 Oversees all production activities within the wood manufacturing facility, ensuring high-quality output, efficient utilization of materials, and adherence to safety and environmental standards. The role includes planning production schedules, managing workforce performance, controlling waste, and coordinating with maintenance and quality departments to ensure smooth daily operations.
 
 
 
 
 
 
 Responsibilities
 
 
 <ul>
 <li>
 Oversee the entire production plant and departments, Develop factory procedures and plans.
 </li>
 <li>
 Preforms and reports KPI measures and standards, Prepare annual budget reports for production operations.
 </li>
 <li>
 Manage production capacity and resource planning in order to meet production demands and plans.
 </li>
 <li>
 Organize production meetings, production activities, work schedules, machine maintenance schedules and maintain budget and product quality.
 </li>
 <li>
 Manage all factory resources (manpower and machines).
 </li>
 <li>
 Ensure effective Supervision of labor during production, Control store assets and coordinate procurement.
 </li>
 <li>
 Ensure adherence to and implementation of workplace safety rules, standards and best practices.
 </li>
 <li>
 Analyze workforce requirements., Staff training in order to meet better requirements demanded by customers.
 </li>
 <li>
 Issue weekly and monthly production performance reports and update management and project team with production progress.
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in engineering or a related field (preferred). A master&rsquo;s degree is an advantage.
 </li>
 <li>
 8+ years experience in wood production, furniture manufacturing, carpentry workshops, or similar environment.
 </li>
 <li>
 Strong leadership and problem-solving skills
 </li>
 <li>
 Strong organizational and managerial skills
 </li>
 <li>
 Technical knowledge of wood production processes
 </li>
 <li>
 Quality and safety focus
 </li>
 <li>
 Excellent Communication skills in both English and Arabic
 </li>
 </ul>
 
 
</div>

Production Manager (Al-Othman Wood Industries - AWI)

GE Vernova

<div>
 
 Job Description Summary
 
 
 
 The Production Supervisor is responsible for leading hourly operators to achieve daily production, safety, quality, and delivery goals. This role oversees day-to-day line operations, assigns work based on production priorities and available resources, and ensures work is completed safely, efficiently, and in compliance with established standards. The supervisor also plays a key role in driving continuous improvement, maintaining operational discipline, and partnering with cross-functional teams to resolve issues and support business objectives..
 
 
 
 Job Description
 
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Assign daily work and responsibilities to operators based on production requirements, line priorities, and available resources.
 
 
 </li>
 <li>
 Supervise and support hourly employees to ensure tasks are completed safely, accurately, and in accordance with established procedures and quality standards.
 
 
 </li>
 <li>
 Lead daily team huddles to review performance, production priorities, key issues, and action plans.
 
 
 </li>
 <li>
 Verify readiness for production at the start of each shift, including staffing, materials, equipment, and process readiness.
 
 
 </li>
 <li>
 Support the use of production systems and tools needed for daily execution and reporting.
 
 
 </li>
 <li>
 Identify, communicate, and escalate issues related to safety, quality, delivery, and cost as needed.
 
 
 </li>
 <li>
 Reinforce compliance with all safety requirements, safe work practices, and company policies.
 
 
 </li>
 <li>
 Participate in problem-solving, root cause analysis, and corrective action activities to address production, quality, safety, and operational issues.
 
 
 </li>
 <li>
 Ensure materials and consumables are available at workstations to support uninterrupted production.
 
 
 </li>
 <li>
 Prepare and distribute required production documents and operational instructions.
 
 
 </li>
 <li>
 Monitor line activity to ensure adherence to standard work, process discipline, and production expectations.
 
 
 </li>
 <li>
 Maintain a clean, safe, and organized work environment in alignment with workplace organization standards.
 
 
 </li>
 <li>
 Apply Lean manufacturing principles to daily supervision and line management activities.
 
 
 </li>
 <li>
 Identify and communicate opportunities to improve safety, quality, delivery, productivity, and waste reduction.
 
 
 </li>
 <li>
 Support improvements in standard work, visual management, line organization, and process consistency.
 
 
 </li>
 <li>
 Partner closely with cross-functional teams, including Quality, Maintenance, Planning, and Engineering, to resolve issues and meet production goals.
 
 
 </li>
 <li>
 Use shop floor systems, production tracking tools, and escalation processes as required.
 
 
 </li>
 <li>
 Ensure compliance with company quality standards, safety policies, procedures, and operating requirements.
 
 
 </li>
 </ul>
 
 Required Qualifications
 
 
 
 <ul>
 <li>
 Diploma, technical college degree, or equivalent hands-on experience.
 
 
 </li>
 <li>
 Min 5 years&rsquo; experience in a manufacturing, industrial, or production environment.
 
 
 </li>
 <li>
 Min 2 years&rsquo; experience leading teams, coordinating shop floor activities, or supervising operators.
 
 
 </li>
 </ul>
 
 Preferred Qualifications
 
 
 
 <ul>
 <li>
 Understanding of Lean manufacturing, DMS, SQDC, 5S, and continuous improvement tools.
 
 
 </li>
 <li>
 Experience conducting daily management meetings and supporting visual management systems.
 
 
 </li>
 <li>
 Familiarity with production systems such as ELM, SmartShop, and MyAndon.
 
 
 </li>
 <li>
 Min 2 years&rsquo; experience working with gas turbine components or other precision aerospace/industrial parts.
 
 
 </li>
 </ul>
 
 
 
 Additional Information
 
 
 
 
 
 
 Relocation Assistance Provided:
 
 No
</div>

Supervisor-1

GreenTree Advisory Services Pvt Ltd

<div>
 
 Job Description &ndash; Production Head (Machining &amp; Maintenance)
 
 
 Location: Dammam, Saudi Arabia
 
 
 
 
 
 Position Overview The Production Head will be responsible for overseeing end-to-end manufacturing operations with a strong focus on machining, CNC operations, and maintenance excellence. This role requires a seasoned professional with deep expertise in process planning, production optimization, and equipment reliability to ensure efficient, high-quality output aligned with organizational goals.
 
 
 
 
 
 Key Responsibilities
 
 
 
 
 
 Production &amp; Operations Management
 
 
 
 
 
 &bull; Lead and manage overall production activities to ensure timely delivery and optimal resource utilization
 
 
 &bull; Develop and implement production plans, schedules, and workflows for machining operations
 
 
 &bull; Monitor production KPIs and drive continuous improvement initiatives
 
 
 
 
 
 Process Planning &amp; Optimization
 
 
 
 
 
 &bull; Design and optimize manufacturing processes with a strong emphasis on machining and CNC operations
 
 
 &bull; Ensure efficient process flow, reduced cycle time, and cost optimization
 
 
 &bull; Collaborate with design and engineering teams for process feasibility and improvements
 
 
 
 
 
 CNC &amp; Machining Expertise
 
 
 
 
 
 &bull; Oversee CNC machining operations, including programming, tooling, and setup
 
 
 &bull; Ensure proper utilization and maintenance of CNC machines (turning centers, VMCs, HMCs, etc.)
 
 
 &bull; Drive best practices in machining processes to maintain quality and precision
 
 
 
 
 
 Maintenance Management
 
 
 
 
 
 &bull; Lead preventive and predictive maintenance programs for all production equipment
 
 
 &bull; Ensure minimal downtime and maximum equipment efficiency
 
 
 &bull; Coordinate with maintenance teams to troubleshoot and resolve technical issues
 
 
 
 
 
 Quality &amp; Compliance
 
 
 
 
 
 &bull; Ensure adherence to quality standards, safety regulations, and industry best practices
 
 
 &bull; Implement quality control measures to maintain product consistency
 
 
 &bull; Drive a culture of safety and compliance across the production floor
 
 
 
 
 
 Team Leadership &amp; Development
 
 
 
 
 
 &bull; Lead, mentor, and develop production and maintenance teams
 
 
 &bull; Ensure workforce productivity, engagement, and skill enhancement
 
 
 &bull; Foster a collaborative and performance-driven work environment
 
 
 
 
 
 Key Requirements
 
 
 &bull; Bachelor&rsquo;s degree in Mechanical Engineering or related field
 
 
 &bull; 10&ndash;12 years of experience in production, with strong exposure to process planning
 
 
 &bull; Proven experience in machining and CNC operations (mandatory)
 
 
 &bull; Strong background in maintenance management (preventive &amp; predictive)
 
 
 &bull; Hands-on experience with CNC machines, tooling, and programming
 
 
 &bull; Strong leadership, problem-solving, and decision-making skills
 
 
 &bull; Familiarity with Lean Manufacturing / Six Sigma practices is an advantage
 
</div>

Production Head (Machining & Maintenance)

Explore 33+ Production engineer in Ad Dammam this May. Find roles across top companies and apply now to boost your career.