production engineer

GLOBAL INFRA SERVICES

Urgently Required Production Engineer at JubailExperience-15 years&rsquo; experience at polystyrene field (including EPS, HIPS and GPPS)Salary - Negotiable&middot; Educational Qualification&mdash;Bachelor&rsquo;s Degree in Engineering&middot; Good technical knowledge of petrochemical operations.&middot; Good knowledge of related health, safety and environmental regulations.&middot; Capable of handling multiple tasks.&middot; Strong interpersonal communication skills.&middot; Ability to continuously drive for process improvement.&middot; Ability to work under pressure and meet tight deadlines.Strong commands of oral and written English.Location-Jubail&middot; Job Responsibility-Review and audits materials &amp; energy balance to identify plant/process efficiency, Yields &amp; Losses.&middot; Preparing the Daily/Monthly/Quarterly/Yearly Production Reports.&middot; Complete the monthly closing in the SAP.&middot; Carry out all the SAP transactions (Purchase Requisition, Purchase Order, Good Receipt and Service Entry Sheet).&middot; Assures that the unit is operated within the operating design limits, product quality meets the specification, and corrective actions are taken for any quality deviation.&middot; Ensure unit parameters are optimized to achieve plant KPI&rsquo;s.&middot; Participate in all the technical studies and make feasibility studies for the plant projects.&middot; Coordinates with supporting Departments to resolve deficiencies/bottlenecks and improves plant performance and reliability.&middot; Monitor and review the sustainability parameters and provide technical solution in case of deviation and issuing the sustainability report.&middot; Reviews technical reports / change proposals and vendor reports for implementation towards improvements.&middot; Support EHSS / quality coordinator to investigate QI&rsquo;s.Interested Candidate can apply with updated CV toKindly mention following details.(1) Your current Salary(2) Expected Salary(3) Notice Period(4) Your Current Location(5) Your valid Mobile #(6) Your NationalityJob Type: Full-timePay: &#65020;2,000.00 - &#65020;20,000.00 per month

Production Engineer

Confidential Semi-Government

<div>
 
 JOB PURPOSE/OBJECTIVE:
 
 
 
 
 
 The Design Engineer II supports the development of production designs for mechanical parts to meet specified requirements and quality standards. This includes preparing part drawings, assisting in engine troubleshooting during production, and providing support during acceptance testing and post-commissioning phases. The engineer also contributes to resolving engine-related issues during production and testing under the guidance of senior team members.
 
 
 
 
 
 KEY ACCOUNTABILITIES:
 
 
 
 
 <ol>
 <li>
 Assist in developing 2D/3D CAD-based design systems compatible with the Licensor&rsquo;s standards and support
 </li>
 <li>
 in establishing drawing and technology documentation practices.
 </li>
 <li>
 Collaborate with senior engineers to maintain communication channels with the Licensor and technical partners, helping in gathering insights on technical trends and engineering issues.
 </li>
 <li>
 Contribute to the design of structural engine parts such as bedplates, frame boxes, cylinder frames, and platforms, as well as moving components, under supervision.
 </li>
 <li>
 Use CAD tools to develop accurate 2D/3D models of engine components and assemblies, ensuring compliance with Licensor specifications and internal standards.
 </li>
 <li>
 Prepare parts lists and issue Purchase Order Requests (PORs) with accuracy and completeness, supporting procurement of components as per quality and quantity requirements.
 </li>
 <li>
 Provide design inputs in coordination with other departments and assist in preparing technical documentation such as Extent of Delivery (EOD) based on Purchase Order Specifications (POS).
 </li>
 <li>
 Assist in investigating engine issues such as vibration, noise, or misalignment during production and work with senior engineers and the Operations team for resolution.
 </li>
 <li>
 Support in managing Non-Conformity Reports (NCRs) and the List of Differences (LOD), and coordinate with the Licensor for issue clarification and resolution.
 </li>
 <li>
 Participate in efforts to improve design efficiency and reduce material waste through cost-conscious
 </li>
 </ol>
 
 engineering approaches.
 
 
 QUALIFICATIONS &amp; EXPERIENCE:
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in mechanical or electrical engineering&bull; Detail Design experience for mechanical parts of engine
 </li>
 <li>
 knowledge of Microsoft office and technical systems - AutoCAD-22, Ansys 2021 R2 / Creo 5.0
 </li>
 </ul>
</div>

Design Engineer (Fresh Graduate)

Matar Al Baqmi Holding Company

<div><h3 class="jobSectionHeader">Job Purpose</h3>
The Planning Engineer is responsible for developing, monitoring, and controlling project schedules for the fabrication of pressure vessels, heat exchangers, tanks, and related static equipment. The role ensures timely execution of production activities, resource allocation, and coordination between engineering, procurement, and fabrication teams to meet project deadlines and customer requirements.<h3 class="jobSectionHeader">
Key Responsibilities</h3><h3 class="jobSectionHeader">
1. Project Scheduling &amp; Planning</h3><ul>
<li>Prepare detailed project schedules (Level 1&ndash;4) covering engineering, procurement, fabrication, welding, NDT, painting, and dispatch.
</li><li>Develop work breakdown structures (WBS) for each project.
</li><li>Track project milestones and ensure alignment with contractual delivery dates.
</li><li>Monitor project progress daily/weekly and update project schedules accordingly.
</li></ul><h3 class="jobSectionHeader">2. Coordination &amp; Communication</h3><ul>
<li>Coordinate with Engineering, Procurement, Production, QC, and Supply Chain teams for smooth workflow.
</li><li>Conduct weekly progress review meetings with internal teams and provide recovery plans when needed.
</li><li>Communicate schedule delays, risks, and impacts to management and propose corrective actions.
</li></ul><h3 class="jobSectionHeader">3. Documentation &amp; Reporting</h3><ul>
<li>Prepare daily, weekly, and monthly progress reports.
</li><li>Maintain project planning documents including fabrication status reports, manpower loading, and material delivery status.
</li><li>Update dashboards and KPIs for management review.
</li></ul><h3 class="jobSectionHeader">4. Resource Management</h3><ul>
<li>Plan manpower, machines, and material requirements for each phase of fabrication.
</li><li>Ensure optimum utilization of workshop resources.
</li><li>Forecast potential bottlenecks and identify solutions in advance.
</li></ul><h3 class="jobSectionHeader">5. Monitoring Fabrication Progress</h3><ul>
<li>Track fabrication stages such as cutting, rolling, welding, machining, assembly, hydro testing, NDT, and painting.
</li><li>Ensure adherence to ASME, API, and client specifications.
</li><li>Follow up with QC for inspection and documentation schedules.
</li></ul><h3 class="jobSectionHeader">6. Risk Management</h3><ul>
<li>Identify project risks related to schedule, material delays, or production challenges.
</li><li>Develop mitigation and contingency plans.</li>
</ul><h3 class="jobSectionHeader">
Skills &amp; Competencies</h3><ul>
<li>Strong knowledge of fabrication processes for pressure vessels, heat exchangers, tanks, and static equipment.
</li><li>Proficiency in planning software: Primavera P6, MS Project, and Excel.
</li><li>Understanding of ASME Section VIII, TEMA, API standards.
</li><li>Excellent communication and coordination skills.
</li><li>Ability to work under pressure and meet tight deadlines.</li>
</ul>
Requirements<h3 class="jobSectionHeader">
Qualifications &amp; Experience</h3><ul>
<li>Bachelor&rsquo;s Degree in Mechanical Engineering or related field.
</li><li>3&ndash;6 years of experience in project planning within pressure vessel, heat exchanger, or heavy fabrication industry.
</li><li>Experience working in ASME-certified fabrication workshops is preferred.</li></ul></div>

Planning Engineer

ALI A. AL-ZAYER & PARTNER CO

Job SummaryThe Process Performance Engineer is a mid-level professional responsible for the routine technical evaluation, monitoring, and troubleshooting of unit operations. This role focuses on ensuring that all processing units and utilities operate efficiently, meet performance targets, and adhere to environmental and safety standards. The engineer will provide regular technical analysis and support to the Operations team.Key Responsibilities and Scope of EvaluationThe successful candidate will focus on the performance monitoring and evaluation of the following critical units and systems:I. Core Processing &amp; Conversion Units<ul><li>Routine Performance Monitoring: Track and evaluate daily performance, yields, and key operating parameters for major units including:</li><li>Distillation: CDU+VDU (Crude &amp; Vacuum Distillation)</li><li>Hydroprocessing: LP HDS, HP HDS, NHDT (Naphtha Hydrotreating)</li><li>Conversion: CCRU-131 (Catalytic Reformer), FCC U-61 (Catalytic Cracking), MHC U-051 (Mild Hydrocracker), DCU U-21 (Delayed Coker)</li><li>Troubleshooting Support: Provide first-level analysis and technical support to resolve operational deviations and identify root causes for routine performance dips.</li></ul>II. Treating, Recovery, and Specialties<ul><li>Efficiency Analysis: Conduct regular material and energy balance checks for gas, treating, and recovery units:</li><li>Sulfur &amp; Treating: SGP (Saturated Gas Plant), AMINE REG, SRU (Sulfur Recovery), SWS (Sour Water Stripper), SAR (Sulfuric Acid Recovery).</li><li>Specialty Units: BENZ EX 141 (Benzene Extraction), PARAXYLENE U-301, ALKY UNIT (Alkylation).</li><li>Compliance Review: Monitor unit performance against environmental permits and internal specifications, particularly for flare (FL) and waste (WW) stream compositions.</li></ul>III. Utilities and Infrastructure<ul><li>Reliability Monitoring: Evaluate the operational status and efficiency of critical utility systems:</li><li>DHC U-041 (Hydrogen Production) and HPU &amp; PSA (Off-gas Pressure Swing Absorber).</li><li>CW (Cooling Towers), WW (Water Treatment), BFW (Boiler Feed Water), N2 &amp; DM (Nitrogen &amp; DEMIN System), Boiler.</li><li>Data Analysis: Compile and analyze operational data from Tank Forms, Coke Handling (661), and SLF (Storage loading Facility) to support inventory and throughput planning.</li></ul>Job Types: Full-time, Contract Contract length: 12 months

Senior Engineer - Operations

Emerson

<div>Job Summary:
The Instrument Builder position will be based out of Emerson SPARK Saudi
In This Role, Your Responsibilities Will Be:
<ul><li>Follows safety guidelines and report unsafe conditions to supervision.
</li><li>Performs tasks at workstations such as: standard assembly operations, perform calibrations
</li><li>requiring judgment to assure conformance to specifications.
</li><li>Performs testing and part quality verification, basic solving, and repairs, inspection/Out of Box
</li><li>Quality (OBQ) and packing of finished product.
</li><li>Maintaining the equipment and working tools in good working conditions.
</li><li>Follow the procedures and requirements of the Quality Management system.
</li><li>Maintenance of equipment and spare part list.
</li><li>Collaborate with the manufacturing/production engineer to improve production process.
</li><li>Maintain the confidentiality of the information.
</li><li>Proactive attitude towards the process of continuous improvement and the quality maintenance with ability for multitask on production line.
</li><li>Maintain a safe, organized, and clean working environment and facility.
</li><li>Perform other duties as assigned by the direct supervisor or Management.
</li><li>Operates machines using appropriate gauging and tooling and makes basic adjustments to assure conformance to specifications.
</li><li>Recommend changes to improve safety, quality, delivery or cost measures and participates in the revision of manufacturing procedures.
</li><li>Performs daily organization and cleanup of work area, per 5S+1 requirements.
</li><li>Performs multiple production tasks to allow for effective job rotations.
</li>Follows lean principles. 
<li>
</li></ul>Who you are?
<ul><li>You trust technology and innovation is key in pursuing with world's most significant challenges.
</li>You are continuously looking forward to developing and improving your professional skills. 
<li>
</li></ul>For this Role, You Will Need:
Candidates should have a technical diploma, degree, or equivalent (Instrumentation preferred). 
<ul><li>
</li></ul>Preferred Qualifications that Set You Apart:
He should have knowledge of manufacturing function with minimum 2-3 years&rsquo; experience. 
<ul><li>
</li></ul>Our Culture &amp; Commitment to You:
At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives&mdash;because we know that great ideas come from great teams. Our dedication to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.
We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family&rsquo;s physical, mental, financial, and social needs. We provide, medical insurance plans, Employee Assistance Program, tuition reimbursement, employee resource groups, recognition, and much more. Our culture prioritizes work-life balance and offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.
Our training programs and initiatives focus on end-to end development, from onboarding through senior leadership. We provide a wide range of development opportunities, including face-to-face and virtual training, mentorship, and coaching, project management, and on-the-job training.
Adhere to Health, Safety &amp; Environment policies as laid by the organization.</div>

Instrument Builder

<div>Matar Al Baqmi Holding Company is a prominent player in the fields of automotive, engineering, agriculture, and logistics within Saudi Arabia. We pride ourselves on our commitment to quality and compliance with international standards. As we expand our operations, we are seeking a highly motivated Sr Project Engineer specializing in shutdowns and manufacturing to join our team. This role is critical in managing and executing projects efficiently during planned shutdowns, ensuring minimal production disruption and optimal plant operations.<h3 class="jobSectionHeader">
Job Purpose</h3>
The Senior Project Engineer will lead and manage shutdown, turnaround, and maintenance projects related to pressure vessels, heat exchangers, columns, reactors, and other static equipment. The role ensures efficient planning, execution, and completion of shutdown activities within schedule, cost, and safety guidelines.<h3 class="jobSectionHeader">
Key Responsibilities</h3><h3 class="jobSectionHeader">
1. Project Planning &amp; Coordination</h3><ul>
<li>Develop shutdown execution plans, schedules, manpower planning, and resource allocation.
</li><li>Coordinate with clients, contractors, and internal teams for smooth project execution.
</li><li>Prepare project documents such as method statements, ITPs, risk assessments, and work packs.
</li></ul><h3 class="jobSectionHeader">2. Shutdown Execution</h3><ul>
<li>Lead on-site shutdown execution for pressure vessels, heat exchangers, tanks, and static equipment.
</li><li>Monitor daily progress, ensure job quality, and manage site challenges in real-time.
</li><li>Supervise fabrication, repair, re-tubing, hydrotesting, bundle pulling, gasket replacement, and reinstallation.
</li></ul><h3 class="jobSectionHeader">3. Technical Expertise</h3><ul>
<li>Review and interpret engineering drawings, P&amp;IDs, GA drawings, isometrics, and scope of work.
</li><li>Identify technical issues and propose effective engineering solutions.
</li><li>Ensure all jobs are completed as per ASME, API, and client standards.
</li></ul><h3 class="jobSectionHeader">4. Safety, Quality &amp; Compliance</h3><ul>
<li>Ensure compliance with HSE requirements and safe shutdown execution.
</li><li>Verify QA/QC activities including NDT, inspection reports, and test records.
</li><li>Ensure final documentation, close-out reports, and client approvals.
</li></ul><h3 class="jobSectionHeader">5. Stakeholder Management</h3><ul>
<li>Communicate with client representatives, shutdown managers, and inspectors.
</li><li>Conduct daily and weekly meetings, presenting progress and challenges.
</li><li>Manage subcontractors and ensure alignment with project goals.</li>
</ul>
Requirements<h3 class="jobSectionHeader">
Qualifications &amp; Experience</h3><ul>
<li>8&ndash;12+ years of hands-on experience in shutdown/turnaround projects.
</li><li>Proven experience in pressure vessels, heat exchangers, boilers, and static equipment maintenance.
</li><li>Experience working with major clients (ARAMCO, SABIC, SWCC, Ma&rsquo;aden is an advantage).</li>
</ul><h3 class="jobSectionHeader">Key Skills</h3><ul>
<li>Shutdown management
</li><li>Pressure vessels &amp; heat exchanger maintenance
</li><li>Fabrication &amp; welding processes
</li><li>NDT coordination
</li><li>Hydrotesting / Pneumatic testing
</li><li>Root cause analysis
</li><li>Strong leadership &amp; team handling
</li><li>Excellent communication &amp; reporting skills</li></ul></div>

Sr Project Engineer (shut down)

Explore 108+ Production engineer in Al Khobar Saudi Arabia this January. Find roles across top companies and apply now to boost your career.

108 production engineer jobs IN Al Khobar Saudi Arabia

Production Engineer

Design Engineer (Fresh Graduate)

Planning Engineer

Planning Engineer

Senior Engineer - Operations

Instrument Builder

Sr Project Engineer (shut down)