protection and control engineer

Toshiba Europe Ltd

<div>
 <strong>
  Project Scope
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Rehabilitation work for 300KV GIS at Al-Zour South power station.
  </li>
  <li>
   Include removal of old 300KV switchgear , removal old local control panel, change busbar &amp; GIB insulator, install new 300KV GIS, re-used of some LV control cable, new LV cable laying and termination, test, and commissioning.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Experience
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Protection and control system Engineer at least 710-year experience in Kuwait, Familiar with MEW primary substation 400/300/132/33/11/.415 KV preferred experience in one &amp; half scheme and double busbar as well 400/300/132KV substation
  </li>
  <li>
   Understand schematic diagram for different manufacturer
  </li>
  <li>
   Trouble shooting faults
  </li>
  <li>
   Panel modification work
  </li>
  <li>
   Prepare project cable list, termination schedule details, red mark drawing and a- built drawing
  </li>
  <li>
   Carry out coordinate test and commission activities for protection (i.e., busbar protection, 3 Circuit Breaker protection, bay protection, OHL main-1 &amp; Main -2 protection, generator protection and couple TR protection etc.).
  </li>
  <li>
   Prepare and modify site test report for protection &amp; control Panel and follow up with client for approval.
  </li>
  <li>
   Responsible to arrange and open the necessary PTW (permit to work).
  </li>
  <li>
   Manage subcontractor teams on daily basis.
  </li>
  <li>
   Coordinate with MEW Site engineer and site representative on daily basis .
  </li>
  <li>
   Coordinate with MEW safety and security department for Firefighting isolation and normalization on daily basis.
  </li>
  <li>
   Estimate and order the local purchase material if required for PJ.
  </li>
  <li>
   Coordinate and support PJ Erection &amp; testing SV&rsquo;s.
  </li>
  <li>
   Report for PM for daily, weekly and month reports.
  </li>
 </ul>
</div>


Protection and Control Engineer

Bureau Veritas

<div><div><div><div><div><ul><li></li></ul>
</div><div><div><b>Fire Protection and Loss Control Engineer</b></div><div></div><div><br>
POSITION PURPOSE</div><div></div><div><br>
A highly specialized, senior-level position focused on heavy industry specialized fire protection strategies and utility-caused wildfire risk through expert fire protection engineering, advanced risk modeling, active and passive system engineering design expertise, heavy industrial property evaluations, and project coordination in support of major industrial, processing, manufacturing, power generation plant construction and facilities modifications. Provide fire system design reviews associated with loss control for power generation, transmission, distribution, and related equipment for the protection of life and assets while ensuring reliable operations and meeting all legal standards and guidelines. Applicants should understand wildfire mitigation planning, community wildfire mitigation planning, underwriting survey reports, and sound technical experience in providing solutions and recommendations to reduce fire risk at diverse facilities.</div><div></div><div><br>
NATURE AND SCOPE OF THE POSITION</div><div></div><div><br>
Serves as an advanced journey level resource in a relevant professional discipline; works independently on projects of moderate to high complexity; exercise independent judgment and discretion; may serve in a Lead role and assist in planning, coordinating, prioritizing, monitoring and evaluating the work results in assigned areas and in selecting, training, motivating, evaluating and developing lower-level personnel.</div></div></div><div><div><ul><li></li></ul>
</div><div><div>ESSENTIAL FUNCTIONS/DUTIES AND EXPECTED RESULTS</div><br>
<div></div><ul><li>
Assesses, inspects, defines, develops and implements fire system design criteria for heavy industry, power generation and distribution facilities; supervising and approving designs and modifications; preparing bid proposals; evaluating vendor bids; administering contracts; and supervising, testing and accepting construction work programs and procedures for controlling potential losses from fire by reviewing best practices and trends in fire control program design; conducting and coordinating fire protection consultant audits; assessing compliance with applicable fire codes; identifying fire hazards, risks and deficiencies; recommending modifications in fire protection measures or procedures; coordinating services with local fire agencies; and incorporating approved changes into existing fire control programs.</li></ul><br>
<div></div><ul><li>
Provides required engineering data, designs and specifications for clients, develops schedules, coordinates personnel, develops planning for projects, provides critical thinking for all construction and installation phases of all occupancy types, including heavy industrial facilities, power generation, transmission and distribution facilities and infrastructure. Prepares fire and life safety bid packages for new and existing clients, attends client meetings and interviews, may develop detailed specifications, coordinates with clients across states and countries.</li></ul><div></div><div><br>
Provide necessary fire system engineering data and validate changes to ensure clients project needs. Provide clear and concise communication to ensure client understanding and ensuring project success.</div><br>
<div></div><ul><li>
Plans, coordinates, develop priorities, monitors, guides, reviews and conduct work activities associated with department/internal/external projects in accordance with established task objectives and schedule as outlined in the project plan/contract. Research specific state or country regulatory requirements.</li></ul></div></div><p></p><div><div><ul><li><br>
</li></ul>
</div><div><div>Ensures assigned work activities successfully contribute to the overall completion and success of projects.</div><br>
<div></div><ul><li>
Builds and maintains positive internal work relationships and coordinates with internal and external stakeholders.</li></ul><br>
<div></div><ul><li>
Conduct detailed Risk Analyses analyzing potential ignition sources and vulnerabilities, calculations, quantitative fire risk analyses for heavy industry and utilities utilizing data driven analysis.</li></ul><div></div><div><br>
Serves as a fire protection and life safety resource to internal personnel by developing, conducting and/or coordinating personnel training programs in fire prevention, protection, life safety, detection and suppression for Emergency Response Teams and other personnel; reviewing and coordinating consultants&rsquo; review of engineering designs and modifications to fire protection systems; maintaining a library of fire protection codes and regulations; maintaining professional competency and certification to conduct fire training classes; developing and implementing fire evacuation plans; participating in and evaluating the effectiveness of fire drills; and maintaining tracking systems for loss control and related equipment.</div><br>
<div></div><ul><li>
Performs related duties as required.</li></ul></div></div><div><div><ul><li></li></ul>
</div><div><div>MINIMUM QUALIFICATIONS</div><div></div><div><i><br>
Knowledge of:</i> safety policies, practices and procedures; English grammar, punctuation and vocabulary standards; principles, procedures and practices related to fire protection engineering and loss control, construction, inspection, testing, and maintenance requirements and procedures; principles, procedures and practices related to fire protection engineering including fire system analysis, equipment design, water flow and hydraulic calculations; automatic fire protection systems and fire alarm designs; applicable industry standards such as NFPA, UBC, ASME, ASTM, ANSI, and IEEE; federal, state and local laws, codes and regulations governing manufacturing and safety; familiar with California Incident Command System (ICS); principles, procedures and practices related to engineering economic analysis; methods and techniques for planning, organizing and overseeing work activities; techniques and concepts related to teamwork; techniques for exercising leadership and authority; methods and techniques for report preparation and writing; techniques; concepts for cost control and project scheduling; performance management techniques related to Project Management; principles and practices for contract management; procedures and practices for cost control and project scheduling; procedures and practices for monitoring and managing projects; techniques and practices for problem research and resolution; procedures and practices for overseeing contractor&rsquo;s/consultant&rsquo;s work activities; procedures and practices for project budget management.</div></div></div></div></div></div>

Fire Protection and Loss Control Engineer

WSP in the Middle East

<div>
 <strong>
  Job Description
  <br/>
  <br/>
 </strong>
 The Protection Site Engineer will be responsible for supervising, testing, commissioning, and maintaining protection systems in substations, power plants, and transmission/distribution networks. The role ensures reliable operation of protection schemes, compliance with standards, and safe execution of site works.
 <br/>
 <br/>
 <strong>
  Responsibilities
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Review of contractors&rsquo; design drawings and Design approval.
  </li>
  <li>
   Will be responsible for review of inspection &amp; testing procedure, FAT/SAT formats, method statements.
  </li>
  <li>
   Verify relay setting calculations for existing and new protection devices.
  </li>
  <li>
   Verify adequacy checks for current and voltage transformer calculations.
  </li>
  <li>
   Witnessing the testing and commissioning of all protection equipment and ensuring the protection and control philosophy is correctly implemented at site as per client specification.
  </li>
  <li>
   Being well versed with the protection devices of major OEMS -Siemens, GE(Alstom) and ABB, frequently assists the client for implementation of important protection like Cable Differential/Distance, Transformer Differential &amp; REF, Bus bar Differential (Low Impedance and High Impedance) and Reactor Differential.
  </li>
  <li>
   Ensuring all protection and control signals are configured to substation SCADA(IEC61850) and Nation Control Centre (IEC104).
  </li>
  <li>
   Witnessing the testing of Automatic Voltage Regulator (AVR) schemes for Transformer and Reactor.
  </li>
  <li>
   Verify protection and control schematics based on protection requirement.
  </li>
  <li>
   Troubleshooting of the faults in the substations related to protection and control and providing corrective actions to client.
  </li>
  <li>
   Review of method statements submitted by the contractor to ensure safe and reliable protection stability testing of the Cable, Transformer, Reactor and Busbar
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Bachelor&rsquo;s Degree in Electrical / Power Engineering (or equivalent).
  </li>
  <li>
   Minimum 6 years of experience in protection and control engineering (substations / transmission &amp; distribution / power plants).
  </li>
  <li>
   Hands-on experience with protection relays (Siemens, ABB, GE, Schneider, SEL, etc.).
  </li>
  <li>
   Knowledge of relay coordination, fault analysis, and power system protection schemes (distance, differential, overcurrent, etc.).
  </li>
  <li>
   Familiarity with testing tools (Omicron, Doble, Megger, etc.).
  </li>
  <li>
   Strong knowledge of IEC, IEEE, and local utility standards.
  </li>
  <li>
   Excellent problem-solving and troubleshooting skills.
  </li>
  <li>
   Strong communication and site management skills.
   <br/>
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Imagine a better future for you and a better future for us all.
  <br/>
  <br/>
 </strong>
 Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.
 <br/>
 <br/>
 <strong>
  With us, you can. Apply today.
  <br/>
  <br/>
 </strong>
</div>


Protection Engineer-Site Supervision (6 Months)

TESLA POWER CONTROL SWITCHGEARS MANUFACTURING L.L.C

<p><b>Profile Summary:</b><br/>Skilled and detail-oriented <b>Testing Engineer</b> with <b>5&ndash;7 years of experience</b> in the <b>testing and quality assurance of Protection Panels, Local Control Cubicles (LCC), Switchgear, and Automation Panels</b>. Possesses a strong understanding of <b>protection schemes, control logic, interlocking circuits</b>, and <b>system integration</b>. Experienced in <b>Factory Acceptance Tests (FAT)</b> and client inspections, with a proven record of ensuring compliance with technical specifications, standards, and customer requirements.</p><p><b>Core Competencies:</b></p><ul><li>Testing of Protection &amp; Control Panels (MV/LV)</li><li>Local Control Cubicles (LCC) and Switchgear Systems</li><li>Substation Automation Systems (SAS)</li><li>Relay Configuration &amp; Secondary Injection Testing</li><li>Protection Scheme Understanding (Feeder, Transformer, Busbar, etc.)</li><li>Functional &amp; Interlock Verification</li><li>Handling Customer FAT and Technical Inspections</li><li>Coordination with Engineering and Production Teams</li><li>Documentation &ndash; Test Reports, FAT Procedures, Inspection Checklists</li><li>Compliance with IEC / Utility Standards and Project Specifications</li></ul><p><b>Key Responsibilities:</b></p><ul><li>Conduct routine and final testing of protection, control, and automation panels as per approved drawings and test plans.</li><li>Verify wiring, interlocks, and protection schemes through schematic checks and functional testing.</li><li>Configure and test protective relays and IEDs (e.g., Siemens, ABB, SEL, Schneider, GE).</li><li>Prepare and execute <b>FAT procedures</b> and coordinate with clients and consultants during FAT sessions.</li><li>Ensure all test instruments are calibrated and maintained as per QA/QC requirements.</li><li>Identify and resolve non-conformities during testing and coordinate corrective actions with design and production teams.</li><li>Prepare detailed test reports, inspection records, and documentation for customer submission.</li><li>Support commissioning teams with technical clarifications when required.</li></ul><p><b>Professional Attributes:</b></p><ul><li>Strong analytical and troubleshooting skills.</li><li>Excellent understanding of electrical protection principles and automation logic.</li><li>Good communication and customer-handling skills.</li><li>Hands-on experience in factory environment and electrical safety standards.</li><li>Proficient in Microsoft Office and relay testing software (OMICRON / Megger / etc.).</li></ul><p><b>Qualification:</b></p><ul><li>Bachelor&rsquo;s Degree / Diploma in Electrical or Electronics Engineering.</li><li>Training or certification in Protection &amp; Relay Testing (preferred).</li></ul><p>Job Type: Full-time</p><p>Pay: AED4,000.00 - AED7,000.00 per month</p>

Testing Engineer – Protection Panels / LCC / Switchgear / Automation Panels

GE Vernova

<div>
 <strong>
  Job Description Summary
  <br/>
  <br/>
 </strong>
 Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation.
 <br/>
 <br/>
 Impacts departmental operations and responsible for Tendering/execution.
 <br/>
 <br/>
 The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning.
 <br/>
 <br/>
 The current role is expected to deliver ITO/OTR for HVDC&amp;AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS &amp; GIS) is pre-requisite.
 <br/>
 <br/>
 <strong>
  Job Description
  <br/>
  <br/>
 </strong>
 <strong>
  Roles and Responsibilities:
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications.
  </li>
  <li>
   Defining control system requirements for the software architecture, development, and verification
  </li>
  <li>
   Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project.
  </li>
  <li>
   Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools
  </li>
  <li>
   Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment.
  </li>
  <li>
   Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages.
  </li>
  <li>
   Collaborate with other functions to integrate control and protection systems into overall project designs.
  </li>
  <li>
   Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines.
  </li>
  <li>
   Ability to use control and protection software tools such as relay coordination software, and simulation programs.
  </li>
  <li>
   Deploy Engineering tools (CAD, PDM/DMS) as per project requirements.
  </li>
  <li>
   Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection.
  </li>
  <li>
   Ability to analyze and interpret relay settings, coordination curves, and fault records.
  </li>
  <li>
   Excellent problem-solving skills and the ability to troubleshoot complex electrical issues.
  </li>
  <li>
   Effective communication and teamwork skills to collaborate with internal and external stakeholders.
  </li>
  <li>
   Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases.
  </li>
  <li>
   Engineering management skills to handle engineering tasks, timelines, and resources efficiently.
  </li>
  <li>
   Deliver high technical quality of GE&rsquo;s proposals in LV Secondary side including processes &amp; programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk.
  </li>
  <li>
   Responsible for technical proposal accuracy including technical specifications &amp; clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data.
  </li>
  <li>
   Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions.
  </li>
  <li>
   Provide technical support to create subcontractors and power equipment bid packages.
  </li>
  <li>
   Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope.
  </li>
  <li>
   Write technical specifications for LV and Control/Protection and services, working with PM&rsquo;s &amp; Sourcing to manage quotes and vendor responses.
  </li>
  <li>
   Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full &ldquo;Engineer, Procure, &amp; Construct&rdquo; estimates for HV Substations, conventional utility, industrial, &amp; renewable substations, P&amp;C and equipment programs, Systems &amp; Communications projects, and BOP projects including FACTS, HVDC Segments
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Required Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Bachelor of Electrical Engineering or relevant educational degree.
  </li>
  <li>
   Fluency in English is mandatory
  </li>
  <li>
   At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design.
  </li>
  <li>
   Power system behaviors and application of protection to power systems.
  </li>
  <li>
   Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design.
  </li>
  <li>
   Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage.
  </li>
  <li>
   Knowledge of RTDS/RSCAD will be an added advantage.
  </li>
  <li>
   Knowledge of waveform and fault analysis
  </li>
  <li>
   Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination.
  </li>
  <li>
   Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces.
  </li>
  <li>
   Good command of secondary engineering tools (AutoCAD, Engineering Base).
  </li>
  <li>
   Experience with project risk management, financial processes, and global tendering requirements.
  </li>
  <li>
   Familiar with project technical management processes, preferably in a multi-disciplinary team&rsquo;s context with multiple interfaces
  </li>
  <li>
   First experience in managing subcontracted design work package (preferably externally)
  </li>
  <li>
   Technical leadership and mentoring good technical communication skills.
  </li>
  <li>
   Strong interpersonal skills
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Desired Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Experience in technical problem solving.
  </li>
  <li>
   Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail.
  </li>
  <li>
   Willingness to travel globally and work in diverse environments.
  </li>
  <li>
   Able to work to deadlines with high quality, sense of urgency and delivery.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  <strong>
   <strong>
    Additional Information
    <br/>
    <br/>
   </strong>
  </strong>
 </strong>
 <strong>
  Relocation Assistance Provided:
 </strong>
 No
</div>


Control and Protection Engineer

Welty Energy

<div><p>Welty Energy, an affiliate of Welty, is a professional services company specializing in program and project management, transmission line engineering, substation engineering and construction oversight on transmission, substation and distribution projects ranging in voltages from 4kV to 765kV.</p><p>
Headquartered in Akron, OH, and working nationally, Welty Energy currently manages approximately $500 million in construction projects for electric utilities in the Midwest and Northeast regions of the U.S.</p><p>
And now, Welty Energy is looking for a Substation Engineer to join our team! As part of the Welty Energy Substation Team, you will represent our client(s) specific to substation design working on projects ranging from 12kV-500kV.</p><p><b><i>
While this position can be remote the hired team member is to be based in the united states (currently).</i></b><i> Relocation and sponsorship is unfortunately not provided at this time.</i></p><p><b>
Day to day, you may:</b></p><ul><li>
create and modify protection and control design drawings including, but not limited to one-lines, three-lines, AC schematics, DC schematics, communication drawings, wiring diagrams, etc.</li><li>
create and modify physical drawings including plan and section views, yard layouts, bill of material lists, grounding drawings, etc.</li><li>
perform calculations such as battery sizing, AC loading, voltage drop, conduit fill, lightning protection, lighting design, and ground grid studies.</li><li>
perform reviews of Substation Engineers an Designers work to ensure they meet code, customer requirements, and good engineering practices.</li><li>
coordinate with other disciplines such as project management and civil engineering teams.</li><li>
interface with client&rsquo;s engineering groups and project management team to provide regular and timely updates.</li><li>
review manufacturer drawings.</li><li>
incorporate red line drawings from the field to as-builts.</li><li>
update design leads or project managers on project status as needed.</li><li>
perform site visits when necessary.</li></ul><p><b>
What we require:</b></p><ul><li>
Bachelor's degree in Electrical or Civil Engineering at an ABET accredited university</li><li>
5+ years of experience as a Substation Engineer</li><li>
EIT Certification with the intention to pursue PE license (PE preferred)</li><li>
Ability to travel 10-20% (project specific)</li></ul><p>
See our Culture video <b>here </b>to learn more about what makes Welty Energy such a great place to work for!</p><p><b>
Important Notice to US Applicants:</b></p><p><i>
Welty Energy, an affiliate of Welty Building Company, LLC., is an at-will employer.</i></p><p><i>
We are an Equal Opportunity Employer.</i></p></div>

Electrical Substation Engineer

K&A Engineering

<div><div><div><p><b>K&amp;A Engineering Consulting &ndash;</b> is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees.</p>
<p><b><i>Powered By Innovation, Passion, And Purpose.</i></b></p>
<p><b>Start your K&amp;A Career:</b></p>
<p>We are seeking a highly motivated and skilled <b>Transmission Protection &amp; Control Engineer </b>to join our team at K&amp;A Engineering in <b>Charlotte, North Carolina.</b> In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You&rsquo;ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated.
</p><p><b>Role Expectations:
</b></p><ul><li>Develop comprehensive scopes of work for electrical Protection &amp; Controls (P&amp;C) systems in support of capital projects.</li>
<li>Assess substation yard and control house modifications, including major equipment upgrades, relay specifications, and panel layouts.</li>
<li>Identify and specify required equipment, materials, relay types, cabling, and telecom needs.</li>
<li>Perform site visits to evaluate existing conditions and validate project requirements.</li>
<li>Collaborate closely with stakeholders (Construction, Maintenance, Project Management, Planning, Operations) to ensure scope alignment with operational needs.</li>
<li>Apply engineering principles to resolve technical issues, conduct feasibility analyses, and provide solutions for moderately complex to complex problems.</li>
<li>Prepare accurate technical documentation, reports, calculations, and sketches.</li>
<li>Ensure scopes comply with internal standards, regulatory guidelines, and industry best practices.</li>
<li>Independently manage scope development schedules, interfaces, and deliverables with minimal oversight.</li>
<li>Support project execution teams during design and construction by clarifying scope intent and resolving field issues.</li>
<li>Foster strong working relationships across departments to drive efficient collaboration and decision-making.</li>
</ul>
<p><b>What we&rsquo;re looking for:</b></p>
<ul><li>Bachelor of Science in Engineering from an ABET-accredited program (or equivalent)</li>
<li>3+ years of relevant engineering experience within the utility industry
</li><li>Professional Engineer (PE) license preferred
</li><li>Proficient in the design of protection settings and control of all classes of substations
</li><li>Familiar with the creation of SPCC plans and secondary oil containment designs</li>
<li>Proficient in engineering theories and principles</li>
<li>Proficient in practices of researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations,</li>
<li>Demonstrated effective verbal and written communication skills</li>
<li>Familiar with principles of project management</li>
</ul>
<p><b>Pay Range: $95,000&mdash;$105,000/year
</b></p><p><b>Why Join K&amp;A?</b><br>
<b>People-First Culture:</b> We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority.<br>
<b>Innovation &amp; Learning:</b><b> </b>We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience.<br>
<b>Collaborative Team Environment:</b> We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees.<br>
<b>Recognition &amp; Growth:</b> We&rsquo;ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth.<br>
<b>Competitive Compensation &amp; Benefits:</b><b> </b>We offer<b> </b>a<b> </b>comprehensive benefits package for eligible classified employees, including but not limited to:</p>
</div>
<div><ul><li>Medical, Dental, and Vision Insurance</li>
<li>FSA, HSA, and Dependent Care Spending Account
</li><li>401K (Traditional and Roth with Company Match)</li>
<li>Lifestyle Spending Account (LSA)</li>
<li>Paid Parental Leave
</li><li>Paid Holidays and Flexible PTO</li>
<li>Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance
</li><li>Long-Term Disability, Short-Term Disability, and Life Insurance</li>
<li>EAP (Employee Assistance Program)</li>
</ul>
</div><p><b><i>Check out our career page for more information!</i></b></p>
<p>The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.</p></div></div>

Transmission Protection & Control Engineer

Search 10000+ Protection and control engineer jobs near you this November. New roles added regularly across leading industries. Apply today.