quality process lead

GE Vernova

<div><div><div>The Process Quality Engineer (PQE) for Nozzle and Shroud Repair plays a critical role in elevating both process and product quality by driving defect reduction across repair operations. This position demands close collaboration with salaried and hourly team members to embed quality principles throughout every stage of the repair process. To effectively support leadership, the PQE must cultivate deep expertise in Quality Management Systems (QMS), ensuring compliance while championing continuous improvement and operational excellence.<h1 class="jobSectionHeader">
Job Description</h1>
What you'll do:<ul><li>
Fulfilment-5 Metrics: Operationalize and sustain quality metrics, including Web CRT compliance, RCA/RCI cycle, and CoPQ tracking, to ensure consistent quality standards are met.</li><li>
Zero Exception Culture: Promote and sustain a culture of 'zero exceptions' in quality, ensuring operations comply with both regulatory and non-regulatory standards by engaging with shop floor operators regularly.</li><li>
QMS Compliance: Assist the operations team in operationalizing and ensuring adherence to QMS procedures specific to Combustion Liner, Transition Piece and CAP Repair.</li><li>
Defect Reduction: Lead projects aimed at reducing defects and work collaboratively with EHS and Engineering teams to promptly address and resolve shop floor quality issues.</li><li>
On-Time Delivery: Facilitate on-time delivery by eliminating rework loops caused by quality issues affecting First Pass Yield (FPY).</li><li>
Quality Initiatives: Champion quality initiatives and projects focused on reducing the Cost of Poor Quality (CoPQ) within the repair cell.</li><li>
5S Lean Implementation: Promote and implement 5S Lean initiatives to enhance efficiency and organization within the repair cell.</li><li>
Audits and CAPA: Conduct assigned audits and develop effective Corrective and Preventive Actions (CAPA) plans to address identified issues.</li><li>
Training Support: Support training activities for new employees or during job changes in compliance with the GEMTEC training verification process.</li><li>
Own all aspects of quality, including both quality assurance and quality control. This includes product and service quality, manufacturing process conformance, incoming goods inspection, product verification, and witness points.</li><li>
Maintain GEMTEC quality MOR inputs and cell bowler metrics.</li><li>
Support setup of new lean production lines and improve existing ones from a quality perspective.</li><li>
Ensure engineering designs and technical documentation are complete, accurate, and compliant with customer and end-user requirements.</li><li>
Lead QA/QC activities for Nozzle and shroud repair lines.</li></ul>
What you'll bring:
<ul><li>Bachelor&rsquo;s degree in engineering from an accredited university or college.</li><li>
Minimum 5 years&rsquo; experience in technical or operational/production role.</li><li>
Active listening skills and effective English communication.</li><li>
Strong proficiency in Microsoft Office applications.</li></ul>
What will make you stand out:<ul><li>
Master&rsquo;s degree in Industrial, Mechanical or a related technical field preferred.</li><li>
Prior experience with Lean Manufacturing is preferred.</li><li>
Minimum of 2 years of experience in quality management systems and ISO 9001 requirements.</li><li>
Six Sigma training is preferred.</li><li>
Prior experience with Lean Manufacturing is preferred.</li><li>
Six Sigma training is preferred</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Ability to analyze problems, identify root causes and provide efficient solutions</li><li>
Strong organizational skills</li><li>
Ability to handle diverse activities simultaneously</li><li>
Proactive mindset with a high level of integrity.</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Team player with effective cross-functional communication abilities.</li><li>
Willingness to work in challenging environments as needed.</li><li>
Commitment to achieving project goals and ensuring customer satisfaction.</li><li>
Team player with effective cross-functional communication abilities.</li><li>
Willingness to work in challenging environments as needed.</li></ul><h1 class="jobSectionHeader">
Additional Information</h1><div><div><div><div><div><div><div>
Relocation Assistance Provided: Yes</div></div></div></div></div></div></div></div></div></div>

Lead Process Quality Engineer

V2X Inc

<div>
 
 Overview
 
 
 
 <ul>
 <li>
 This position is physically located in Kuwait in support of LOGCAP***
 
 
 </li>
 </ul>
 The Quality Lead is responsible for performance monitoring of program functional areas through the established auditing program, document control program and Vectrus Improvement Program. The Quality Lead can perform audit surveillances of Program internal procedures to ensure compliance and continuous improvement of processes. Responsibilities also include scheduling, reviewing Audits, approving audits, mentoring auditors and ensuring quality databases are maintained. Ensures all quality systems comply with ISO 9001-2015 standards. Monitoring the customer comment program, ensuring all data is collected, analyzed and reported to leadership. This position will report to the TO Quality Manager or designee.
 
 
 
 Responsibilities
 
 
 
 This position description is subject to change at any time as needed to meet the requirements of the program or company.
 
 
 <ul>
 <li>
 Train, mentor, lead, and provide technical guidance and assistance to the auditors.
 </li>
 <li>
 Administer initial counseling regarding department policies, rules, and expectations to the new auditors.
 </li>
 <li>
 Schedules, assigns, reviews, and approves audit/surveillance reports.
 </li>
 <li>
 Conducts audit surveillances in functional or operational areas
 </li>
 <li>
 Prepares audit/surveillance reports as needed
 </li>
 <li>
 Monitor and track for nonconformances on Vectrus Associated Risk Management System (VARMS) Reports, Enterprise Valued Analytics (EVA), Letter of Technical Direction (LOTD) closures and Self Identification CARs on SharePoint.
 </li>
 <li>
 Facilitates and assists in Root Cause Analysis and development of Corrective and Preventive action plans as required
 </li>
 <li>
 Assigns Corrective Action Request (CAR) verification audits and directs verification methods to verify completeness and effectiveness of corrective/preventive actions.
 </li>
 <li>
 Monitors and oversees the site implementation of the Voice of Customer (VOC) Program, ensuring all data is collected, analyzed, vetted, logged and tracked through closure.
 </li>
 <li>
 Monitors program functions for compliance with the PWS &amp; ISO 9001:2015 Quality Management System (QMS).
 </li>
 <li>
 Participate as required, in Quality partnering meetings with Internal and External Customers.
 </li>
 <li>
 Prepare reports as required to the Quality Manager.
 </li>
 <li>
 Responsible for reporting daily Personnel Status Report (PERSTAT)/ HCAMs.
 </li>
 <li>
 Prepare appointment memorandums and other administrative functions as needed.
 </li>
 <li>
 Order and prepare order requisitions for supplies and property as required.
 </li>
 <li>
 Other duties as assigned.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 MINIMUM QUALIFICATIONS:
 </li>
 <li>
 Education/Certifications: Two years related experience may be substituted for one year of education, if degree is required.
 </li>
 <ul>
 <li>
 High School Diploma
 </li>
 <li>
 ISO 9001: 2015 Lead Auditor certification (or able to obtain within 120 days of hire) from an accredited institution such as ASQ, Koenig, Exemplar Global, SAE, or Global Association of Quality Management with a certificate #).
 </li>
 <li>
 Preferred current ServSafe certification or able to pass examination within 120 days of hire
 </li>
 <li>
 Must have valid US Passport
 </li>
 <li>
 Must possess a valid US or Country of Origin driver&rsquo;s license.
 </li>
 </ul>
 <li>
 Experience:
 </li>
 <ul>
 <li>
 A minimum of 5 years direct Quality Assurance/Quality Control experience is highly desirable.
 </li>
 <li>
 7 years in contracting environment, with a minimum of 5 years of management or supervisory experience highly desirable.
 </li>
 <li>
 Excellent English communicator both in writing reports and verbally.
 </li>
 <li>
 Strong attention to detail is required when reviewing reports and vetting nonconformances.
 </li>
 <li>
 Must have proven strong Leadership skills.
 </li>
 <li>
 Must have high level or senior organizational skills.
 </li>
 <li>
 Must have advanced working knowledge of ISO 9001:2015 and ServSafe
 </li>
 <li>
 Must have intermediate knowledge of the FAR, DFARs &amp; DoD regulations.
 </li>
 <li>
 Must have extensive experience with all Microsoft office products and database management.
 </li>
 <li>
 Candidate must also be able to work under pressure, manage multiple assignments simultaneously, and have excellent
 </li>
 <li>
 Interpersonal skills.
 </li>
 <li>
 Must have excellent English Communication skills both written and oral
 </li>
 </ul>
 <li>
 Skills
 </li>
 <ul>
 <li>
 Strong organizational skills.
 </li>
 <li>
 Computer proficiency in Microsoft Office Excel, PowerPoint, Outlook, Word, Office Tools. Ability to work with very diverse workforce.
 </li>
 <li>
 Excellent communicator both in writing and verbally.
 </li>
 <li>
 Expertise in writing SOP'S, Plans, Work Instructions, processes and Project Orders a plus.
 </li>
 <li>
 Proven skills in Analytical/Problem Solving.
 </li>
 <li>
 Strong planning and organizational skills.
 </li>
 <li>
 Strong attention to detail is required.
 </li>
 </ul>
 <li>
 Supervisory Responsibilities
 </li>
 <ul>
 <li>
 May fill in as a Quality Manager as necessary.
 </li>
 </ul>
 <li>
 Working Conditions:
 </li>
 <ul>
 <li>
 Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.
 </li>
 <li>
 Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).
 </li>
 <li>
 Includes some industrial production environment conditions as well.
 </li>
 </ul>
 <li>
 Physical Requirements:
 </li>
 <ul>
 <li>
 Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.
 </li>
 <li>
 Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.
 </li>
 <li>
 Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.
 </li>
 <li>
 Must comply with all Fire and Safety Regulations and post policies.
 </li>
 </ul>
 </ul>
 
 At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.
 
</div>

Quality Lead

<div>Overview:
<div>
***This position is physically located in Kuwait in support of LOGCAP***</div><div></div><div> 
The Quality Lead is responsible for performance monitoring of program functional areas through the established auditing program, document control program and Vectrus Improvement Program. The Quality Lead can perform audit surveillances of Program internal procedures to ensure compliance and continuous improvement of processes. Responsibilities also include scheduling, reviewing Audits, approving audits, mentoring auditors and ensuring quality databases are maintained. Ensures all quality systems comply with ISO 9001-2015 standards. Monitoring the customer comment program, ensuring all data is collected, analyzed and reported to leadership. This position will report to the TO Quality Manager or designee.</div>
Responsibilities:
<div>
This position description is subject to change at any time as needed to meet the requirements of the program or company.</div><div> 
</div><ul><li>Train, mentor, lead, and provide technical guidance and assistance to the auditors.</li><li>
Administer initial counseling regarding department policies, rules, and expectations to the new auditors.</li><li>
Schedules, assigns, reviews, and approves audit/surveillance reports.</li><li>
Conducts audit surveillances in functional or operational areas</li><li>
Prepares audit/surveillance reports as needed</li><li>
Monitor and track for nonconformances on Vectrus Associated Risk Management System (VARMS) Reports, Enterprise Valued Analytics (EVA), Letter of Technical Direction (LOTD) closures and Self Identification CARs on SharePoint.</li><li>
Facilitates and assists in Root Cause Analysis and development of Corrective and Preventive action plans as required</li><li>
Assigns Corrective Action Request (CAR) verification audits and directs verification methods to verify completeness and effectiveness of corrective/preventive actions.</li><li>
Monitors and oversees the site implementation of the Voice of Customer (VOC) Program, ensuring all data is collected, analyzed, vetted, logged and tracked through closure.</li><li>
Monitors program functions for compliance with the PWS &amp; ISO 9001:2015 Quality Management System (QMS).</li><li>
Participate as required, in Quality partnering meetings with Internal and External Customers.</li><li>
Prepare reports as required to the Quality Manager.</li><li>
Responsible for reporting daily Personnel Status Report (PERSTAT)/ HCAMs.</li><li>
Prepare appointment memorandums and other administrative functions as needed.</li><li>
Order and prepare order requisitions for supplies and property as required.</li><li>
Other duties as assigned.</li></ul>
Qualifications:
<ul><li>MINIMUM QUALIFICATIONS:</li><li>
Education/Certifications: Two years related experience may be substituted for one year of education, if degree is required.<ul><li>
High School Diploma</li><li>
ISO 9001: 2015 Lead Auditor certification (or able to obtain within 120 days of hire) from an accredited institution such as ASQ, Koenig, Exemplar Global, SAE, or Global Association of Quality Management with a certificate #).</li><li>
Preferred current ServSafe certification or able to pass examination within 120 days of hire</li><li>
Must have valid US Passport</li><li>
Must possess a valid US or Country of Origin driver&rsquo;s license.</li></ul></li><li>
Experience:<ul><li>
A minimum of 5 years direct Quality Assurance/Quality Control experience is highly desirable.</li><li>
7 years in contracting environment, with a minimum of 5 years of management or supervisory experience highly desirable.</li><li>
Excellent English communicator both in writing reports and verbally.</li><li>
Strong attention to detail is required when reviewing reports and vetting nonconformances.</li><li>
Must have proven strong Leadership skills.</li><li>
Must have high level or senior organizational skills.</li><li>
Must have advanced working knowledge of ISO 9001:2015 and ServSafe</li><li>
Must have intermediate knowledge of the FAR, DFARs &amp; DoD regulations.</li><li>
Must have extensive experience with all Microsoft office products and database management.</li><li>
Candidate must also be able to work under pressure, manage multiple assignments simultaneously, and have excellent</li><li>
Interpersonal skills.</li><li>
Must have excellent English Communication skills both written and oral</li></ul></li><li>
Skills<ul><li>
Strong organizational skills.</li><li>
Computer proficiency in Microsoft Office Excel, PowerPoint, Outlook, Word, Office Tools. Ability to work with very diverse workforce.</li><li>
Excellent communicator both in writing and verbally.</li><li>
Expertise in writing SOP'S, Plans, Work Instructions, processes and Project Orders a plus.</li><li>
Proven skills in Analytical/Problem Solving.</li><li>
Strong planning and organizational skills.</li><li>
Strong attention to detail is required.</li></ul></li><li>
Supervisory Responsibilities<ul><li>
May fill in as a Quality Manager as necessary.</li></ul></li><li>
Working Conditions:<ul><li>
Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li><li>
Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li><li>
Includes some industrial production environment conditions as well.</li></ul></li><li>
Physical Requirements:<ul><li>
Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.</li><li>
Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li><li>
Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li><li>
Must comply with all Fire and Safety Regulations and post policies.</li></ul></li></ul><h4 class="jobSectionHeader">
At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</h4></div>

TXM Solutions

Head of Quality - Construction Dubai, UAE We are seeking an experienced Head of Quality to lead all Quality Assurance (QA) and Quality Control (QC) functions across our construction projects. This role is pivotal in ensuring projects meet ISO standards, achieve "Right First Time" delivery, and drive operational excellence through quality leadership and continuous improvement.Location: DubaiDepartment: Operations / QualityReports To: Operations Director Role Overview The Head of Quality will establish, implement, and oversee quality management systems across all construction activities. You'll ensure compliance with ISO 9001, ISO 14001, and ISO 45001 standards while promoting a culture of excellence, minimizing material wastage, and maintaining the highest construction quality standards. Key Responsibilities <ul><li>Develop and enforce construction quality standards aligned with ISO and industry best practices.</li><li>Conduct regular QA/QC site audits and ensure timely closure of non-conformances.</li><li>Manage and monitor performance of quality consultants and contractors.</li><li>Lead corrective and preventive actions (CAPA) to eliminate recurring issues.</li><li>Drive continuous improvement and cost-efficiency initiatives.</li><li>Ensure 100% compliance with client and regulatory inspections.</li><li>Lead, mentor, and train QA/QC teams to maintain a "Right First Time" culture.</li></ul> Requirements <ul><li>Bachelor's or Master's degree in Quality Management, Civil Engineering, or a related field.</li><li>10-15 years of proven QA/QC management experience in large-scale construction projects.</li><li>Strong knowledge of ISO 9001, 14001, and 45001 standards.</li><li>Excellent leadership, communication, and problem-solving skills.</li><li>Proficiency in MS Office and quality management software.</li></ul> Seniority level Not Applicable Employment type Full-time Job function Quality Assurance and Management Industries Construction

Bunge

<div>Location : Mohali
City : Mohali
State : Punjab (IN-PB)
Country : India (IN)
Requisition Number : 37191 
Role Purpose Statement 
The Process Lead- trade execution will be the owner of the Trade Execution process. They will be responsible for designing a best in class process that is compliant and standardized across organization. 
Main Accountabilities 
<ul><li>
Finalise best in class To Be process design</li><li>
Sign off on config changes, customization and development from a process and functionality standpoint.</li><li>
Identify the right technology is being used for conducting the business process.</li><li>
Monitor and measure the performance of the Trade Execution business process</li><li>
Improve the business process flow on a continual basis utilizing industry leading practices</li><li>
Help Team Leaders setting policies and procedures for the Trade Execution process</li><li>
Act as key contact person for all internal and external groups (Bunge Global, Counterparties and Statutory team) which affect / are affected by the Trade Execution process</li><li>
Assist team in trouble shooting and decision making</li><li>
Identify changes to long term resource needs and implements appropriate actions</li><li>
Ensure compliance with Sarbanes Oxley Standards &amp; implement the process improvements whenever required.</li><li>
Ensure the internal finance controls, procedures in place and in compliance with company policies.</li><li>
Preparing and updating process documentation and to keep up to date all the time.</li><li>
Responsible for managing contract / settlement KPI Targets as per the defined SLAs.</li><li>
Identify &amp; implement process improvements to generate process efficiency.&quot;</li></ul> 
Knowledge and Skills 
Behavior 
<ul><li>
Use knowledge of Bunge&rsquo;s business, structure and strategy to develop innovative solutions to improve results or eliminate problems.</li><li>
Build partnerships, appropriately influence to gain commitment, foster talent and coach others to grow in current or future roles..</li><li>
Drive results through high standards, focus on key priorities, organization, and preparing others for change.</li></ul> 
Technical 
<ul><li>
Deep understanding of trade execution and Trade Execution activties</li><li>
Good knowledge of concepts and procedures related to shipment of trade commodities and related terms &amp; guidelines, including expertise in Letters of credit and shipping documents</li><li>
Good understanding of contracts, charter parties and key laytime/demurrage provisions and the terminology associated with the petroleum industry and commercial commodities.(Preferred)</li><li>
Knowledge and understanding of marine and terminal operations. (Preferred)</li><li>
Experience in working with business stakeholders in the region, country &amp; group functions. Ability to convert policy &amp; strategic directions into policy, procedures and instructions</li><li>
Experience in principles of business process management and process performance</li><li>
Deep expertise in process transformation and business process re-engineering</li><li>
Aware of process best practices and best in class process performance</li><li>
Deep understanding of service delivery models, target operating models, service management</li><li>
Experience in developing the standards for process documentation and knowledge retention</li><li>
Excellent communicators. High degree of negotiation skills. Ability to take a stand yet find common ground with business stakeholders. Change management skills.</li></ul>
Bunge (NYSE: BG) is a world leader in sourcing, processing and supplying oilseed and grain products and ingredients. Founded in 1818, Bunge&rsquo;s expansive network feeds and fuels a growing world, creating sustainable products and opportunities for more than 70,000 farmers and the consumers they serve across the globe. The company is headquartered in St. Louis, Missouri and has 25,000 employees worldwide who stand behind more than 350 port terminals, oilseed processing plants, grain facilities, and food and ingredient production and packaging facilities around the world. 
Bunge is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, transgender status, national origin, citizenship, age, disability or military or veteran status, or any other legally protected status. Bunge is an Equal Opportunity Employer. Minorities/Women/Veterans/Disabled</div>

Process Lead- Global Trade Execution

Tata Electronics

<div>
 
 Position Title - Facilities Process and Gas Chemical Lead
 
 
 Location - Dholera, Gujrat
 
 
 
 
 
 
 The Role
 
 
 
 Are you passionate about the design, construction and operation of one of the most advanced semiconductor manufacturing facilities in the world?
 
 
 Tata Electronics is looking for a Facility Process Gas and Chemical Engineer to work on optimizing cost-efficiency, smart operations and green manufacturing. The mission of this job is to build an innovative and reliable foundation to manage facilities operations for an advanced semiconductor manufacturing facility.
 
 
 As our Facility Engineer, you will not only operate a leading-edge fab, but also help us achieve energy efficiency by helping develop the technology for green manufacturing, including green building design/maintenance, utilities conservation, material reduction, recycling and reclamation, and greenhouses gas control and reduction.
 
 
 
 
 
 
 Major Work Focus
 
 
 <ul>
 <li>
 Process Gas Supply Systems: Design, build and operate bulk gas, bulk specialty gas and specialty gas supply systems to ensure a reliable supply system of high purity gas material for the 5nm fab production.
 </li>
 <li>
 Process Liquid Chemical and Slurry Supply Systems: Design, build and operate the multiple chemical blending and dispense systems for fab production.
 </li>
 </ul>
 
 
 
 
 
 Job Description
 
 
 
 Your main responsibilities will include, but are not limited to:
 
 <ul>
 <li>
 Conceptualization, engineering design, analysis, specifications, calculations and documentation of hardware and/or process gas, chemical and slurry supply systems for use in semiconductor manufacturing.
 </li>
 <li>
 Working with Design or Project Management organizations on large-scale designs and projects.
 </li>
 <li>
 Construction administration &amp; site observations.
 </li>
 <li>
 Daily systems operation and operation data analysis.
 </li>
 <li>
 Collecting daily process samples and conduct associated lab work and reporting requirements.
 </li>
 <li>
 Monitoring and managing utilities distribution, including power, water, compressed gases, instrumentation and control and so on.
 </li>
 <li>
 Routine system preventative maintenance and troubleshooting.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 Qualifications
 
 
 <ul>
 <li>
 A Bachelor degree in Chemical Engineering, Environmental Engineering, or other related technical fields.
 </li>
 <li>
 An understanding of advanced chemical engineering kinetics, chemical reaction, fluid dynamics design, heat transfer, and thermal management is key to this role.
 </li>
 <li>
 Knowledge of process flows &ndash; i.e., chemical material storage, handling, filtration, mixing, fluid transfer to and from various vessels and disposal management.
 </li>
 <li>
 Employee may be required to work outside normal working hours, including evenings, weekends and/or holidays.
 </li>
 <li>
 Shift work and emergency overtime are required.
 </li>
 <li>
 Familiarity with chemical analysis is preferred.
 </li>
 <li>
 Able to work in a fast-paced, dynamic, and multi-disciplinary environment.
 </li>
 <li>
 10+ years of work experience.
 </li>
 <li>
 Experience with process gas, chemical and slurry systems operations in the semiconductor manufacturing industry is preferred.
 </li>
 <li>
 Experience with AutoCAD.
 </li>
 </ul>
 
 
 What We Look For
 
 
 <ul>
 <li>
 Integrity, Character and Attitude
 </li>
 <li>
 Professionalism Commitment to Deliver the Best Efforts to This Job Requirement
 </li>
 <li>
 Innovation
 </li>
 <li>
 Project management and problem-solving skills
 </li>
 <li>
 Understanding of, and adherence to, safety measures
 </li>
 <li>
 Excellent communication skills and the ability to work effectively across multiple operational disciplines.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 
 
 
 
 
 WHY Tata Electronics
 
 
 <ul>
 <li>
 A COMPANY that drives worldwide information technology by empowering the foremost technology companies with manufacturing capabilities that match their innovation.
 </li>
 <li>
 A CAREER where you can work with smart peers around the world and to work together in a challenging and ever-evolving industry.
 </li>
 <li>
 A WORKPLACE that provides career development, access to state-of-the-art technology, a sense of comradery, and responsibilities.
 </li>
 </ul>
 
 
</div>

Facilities Process and Gas Chemical Lead

Hitachi Energy

<div>Description
The opportunity
Hitachi Energy is looking for a Global Supplier Development Engineer focused on the critical to quality categories such as gaskets, different insulation materials and chemicals. This position can be based anywhere in Europe where Hitachi Energy operates.
In this role, you will ensure our suppliers deliver high-quality materials while maintaining cost-effectiveness. You will implement proactive quality assurance processes to enhance the quality and delivery performance of our supply base. Aligning with our Category Strategy, you will lead supplier assessments, manage development initiatives, oversee parts approvals, and drive continuous improvement, ultimately elevating our supplier partnerships and contributing to our operational excellence.
How you'll make an impact<ul><li>
Lead the supplier qualification process by conducting SAP Ariba assessments and executing global on-site audits to ensure supplier compliance and capability.</li><li>
Implement improvement actions at suppliers based on audit findings and identified process improvements, fostering enhanced collaboration and quality outcomes.</li><li>
Oversee the global parts approval process to ensure supplier materials and components meet technical and operational requirements for various critical to quality materials in Transformers Business unit</li><li>
Monitor supplier performance indicators and drive the annual Supplier Performance Evaluation process to identify and address low-performing suppliers.</li><li>
Develop and implement action plans for supplier performance recovery, working closely with suppliers to ensure the effectiveness of corrective measures.</li><li>
Resolve escalated non-conformities with suppliers by leading root cause analysis and ensuring proper implementation of corrective actions.</li><li>
Drive continuous improvement in supplier management processes at a global level, reflecting lessons learned and promoting best practices across the business unit.</li><li>
Lead key SCM tool/system improvement projects within Supplier Quality and Development domain</li><li>
Act as project lead for single/sole source elimination in critical global categories.</li></ul>
Your background
<ul><li>Degree in Engineering (Chemical, Process, Materials, Mechanical, Polymer science or similar).</li><li>
Minimum of 10 years of experience in supplier development and supplier quality management</li><li>
Strong analytical and problem-solving skills, with the ability to make data-driven decisions</li><li>
In-depth knowledge of chemicals, gaskets and/or insulation material production processes, specifications, and quality standards in transformer industry (or similar)</li><li>
Solid experience with production process assessment.</li><li>
Deep knowledge of Quality and Continuous Improvement tools (Kaizen, DMAIC, A3, 8D, 5Why Analysis).</li><li>
Expertise in APQP/PPAP, P-FMEA, Process Control Plan, SPC, and inspection processes.</li><li>
Ability to manage multiple projects simultaneously with a structured, proactive, and result-oriented approach.</li><li>
Excellent communication skills for effective interaction in an international environment</li><li>
Proven experience with process improvement and standardization across regions</li><li>
Willingness to travel internationally for supplier audits and assessments frequently.</li></ul><h2 class="jobSectionHeader">
Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</h2><h2 class="jobSectionHeader">
This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.</h2></div>

Global Supplier Development Engineer - Transformers (f/m/d)

Search 10000+ Quality process lead jobs near you this January. New roles added regularly across leading industries. Apply today.

10000 quality process lead jobs NEAR_ME

Lead Process Quality Engineer

Quality Lead

Quality Lead

Quality Lead

Process Lead- Global Trade Execution

Facilities Process and Gas Chemical Lead

Global Supplier Development Engineer - Transformers (f/m/d)