senior manufacturing test engineer

Joby Aviation

<div>Company Overview:
<div>
Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service.</div>
Overview:

Joby is looking for a software engineer with experience in electronics manufacturing and software development. Ideal candidates would contain both strong Python skills, electronics test equipment experience, and a firm understanding of the software/hardware interface. 
As a Senior Software Engineer for Test Infrastructure, you will develop software that enables the automation of electronics manufacturing tests in an aerospace production environment. You will manage a Python monorepo of microservices that spans test-execution services, hardware-in-the-loop (HIL) integrations, and CI/release tooling. Beyond code, you are expected to drive technical strategy and cross-team collaboration, turning ambiguous test requirements into a deterministic, automated reality. 
Location: San Carlos, CA. Please note that working remote will not be considered.
Responsibilities:
<ul><li>Build unique new test stations while providing high-tier support for existing stations, ensuring the production line remains deterministic and FAA-compliant.</li><li>
Design and maintain Python test software and HIL (Hardware-in-the-Loop) infrastructure that gates the production and certification of Joby&rsquo;s avionics systems.</li><li>
Drive cross-functional discussions with software, hardware, and manufacturing engineers to translate complex manual acceptance procedures into reliable, fully automated software.</li><li>
Maintain database schemas and ELT pipelines to store mission-critical test results for downstream aerospace analytics.</li><li>
Full-Stack delivery of efficient UIs and robust backend services within an Agile/Sprint environment, deploying via CI/CD pipelines.</li><li>
Understanding of networking fundamentals (TCP/IP, UDP, Routing) to design robust communication paths between test stations and aircraft hardware, ensuring low-latency and reliable data transport.</li><li>
Build async Python services and hand-rolled drivers to interface with test equipment via a deep stack of protocols, including gRPC, WebSockets, Modbus TCP, and SCPI/VISA.</li></ul>
Required:
<ul><li>University degree in computer science, computer engineering or electrical engineering and 7+ years full time industry experience. An advanced degree and 5+ year of practical experience will also be considered.</li><li>
Experience operating electronics test equipment (multimeters, power supplies, data acquisition devices).</li><li>
Experience with networking, Modbus, I2C, and SCPI/VISA protocols and writing drivers for electronics test equipment.</li><li>
Expertise in Python, specifically with asyncio for high-concurrency hardware control and an exposure to other languages such as: C++, C, Go, SQL.</li><li>
Demonstrable experience in software development for production test equipment in a manufacturing environment.</li><li>
Experience designing and implementing test strategies to assess the reliability of automation frameworks and libraries.</li><li>
Mature understanding of Continuous Integration, Continuous Development (CI/CD) and DevOps tools.</li><li>
Ability to work closely with the software development team, and teams in other domains, gathering requirements and feedback.</li></ul>
Desired:
<ul><li>Experience building full-stack applications, including efficient web-based UIs and robust backend services using FastAPI and SQL.</li><li>
Positive attitude and self-motivated work ethic with an openness to feedback.</li><li>
Ability to work effectively as a team member in a geographically distributed team.</li><li>
Willingness to be flexible and learn new technologies.</li><li>
Ability to adjust quickly in a fast-paced environment.</li><li>
Provide mentorship and technical guidance to the team, promoting high engineering standards through constructive code reviews and a collaborative, teaching-oriented approach to problem-solving.</li></ul>
Additional Information:
<div><div><div><div>
Compensation at Joby is a combination of base pay, bonus equity, and Restricted Stock Units (RSUs). The target base pay for this position is $145,300 - $201,200 yr. The compensation package will be determined by job-related knowledge, skills, and experience.</div><div> 
Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.</div><div></div><div> 
Joby is an Equal Opportunity Employer</div></div></div></div></div>

Senior Software Engineer, Manufacturing Test Automation

ursa major

<div><div>Berthoud, Colorado</div><div><div> 

The future of aerospace and defense starts here. 
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
</div>
We&rsquo;re seeking an accomplished, fast-learning individual to join our team as a Senior Flight Test Engineer, driving Ursa Major&rsquo;s mission and supporting both internal and customer-driven flight campaigns. This senior-level role is critical in ensuring success from product delivery and contract execution through to the final stages of flight operations, while mentoring junior engineers and leading project teams.

As a Senior Flight Test Engineer, you&rsquo;ll serve as the on-site technical authority regarding Ursa Major&rsquo;s hypersonic products, taking ownership of system integration, operations, testing, and flight for customer programs, and contributing significantly to the strategy, development, and execution of Ursa Major&rsquo;s own flight initiatives. This position offers a unique opportunity to work hands-on with cutting-edge technology, solve complex challenges, and act as a critical liaison between customers and internal teams, while also providing technical leadership and direction to others.

Responsibilities:
<ul><li>Lead integration, checkouts, and static fire testing of hypersonic vehicles and propulsion systems</li>
<li>Champion Test-Like-You-Fly practices during ground operations at our Berthoud campus and during range operations</li>
<li>Author, review, and execute procedures for checkouts, propellant load, and hotfire operations</li>
<li>Lead and support ground and flight operations with a strong emphasis on safety for Ursa Major&rsquo;s missions, including overseeing other test engineers, operators, and technicians</li>
<li>Guide data review, failure investigations, and sequence preparation for static fire testing and flight</li>
<li>Coordinate with test ranges and external agencies to plan and execute complex flight test campaigns while complying with regulatory and range safety requirements</li>
<li>Lead customer status updates and milestone reviews for both programmatic and technical content</li>
<li>Present and provide technical review in customer meetings, integration reviews, and internal technical deep-dives</li>
<li>Serve as a subject matter expert on Ursa Major&rsquo;s hypersonic vehicle and propulsion systems</li>
<li>Troubleshoot complex system and component hardware issues in the field, developing effective solutions with the Ursa team and customer, and lead implementation efforts</li>
<li>Mentor and provide technical guidance to less experienced team members; contribute to best practices and training resources</li>
</ul>Required Qualifications:
<ul><li>B.S. in Engineering</li>
<li>5+ years of relevant experience in aerospace systems integration, test, or flight operations</li>
<li>Demonstrated team leadership and/or project management experience in technical environments</li>
<li>Passion for developing customer relationships and ensuring mission success</li>
<li>Unwavering attention to detail, curiosity, and relentless in resolving complex problems</li>
<li>Substantial hands-on experience with aerospace hardware and test environments</li>
<li>Comfortable working in a fast-paced, startup environment, adapting to evolving priorities</li>
<li>Willing to spend 30% of the year on travel for multi-week test and flight campaigns</li>
</ul>Desired Experience:
<ul><li>Master&rsquo;s degree in engineering</li>
<li>Technical expertise in liquid rocket engine manufacturing, integration, or test</li>
<li>Technical expertise in vehicle stage systems and propulsion fluid systems</li>
<li>Direct flight or test operational experience</li>
<li>Deep understanding of aerospace industry standards and requirements</li>
<li>Experience in systems engineering and requirements verification</li>
<li>Experience in a mission assurance role</li>
<li>Significant leadership in customer-facing and/or multi-disciplinary technical teams</li>
<li>Experience managing and leading engineering teams through test campaigns and complex projects</li>
<li>Experience working with range requirements for flight test campaigns</li>
<li>Experience mentoring, coaching, or training other engineers</li>
</ul>
Colorado law requires us to tell you the base compensation range of this role, which is $121,000 &ndash; $150,000, determined by your education, experience, knowledge, skills, and abilities. What we can&rsquo;t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.

Classification: Full-time Exempt<div><div> 
<div>
Benefits Include: (Please note, Interns are not eligible for benefits)
<ul>
<li>Unlimited PTO &ndash; Vacation, Sick, Personal, and Bereavement</li>
<li>Paid Parental and Adoptive Leave</li>
<li>Medical, Dental and Vision Insurance</li>
<li>Tax Advantage Accounts (HSA/FSA)</li>
<li>Employer Paid Short and Long Term Disability, Basic Life, AD&amp;D</li>
<li>Additional Benefit Options Including Voluntary Life and Emergency Medical Transport</li>
<li>EAP Program</li>
<li>Retirement Savings Plan &ndash; 401k with Company Match</li>
<li>Equity Grants in the Company</li></ul> 


How To Apply: 
Interested candidates are encouraged to apply by filling out the application . This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.

</div><div>NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don&rsquo;t meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.</div>
</div>
<div></div><div>US CITIZENSHIP, PERMANENT RESIDENCY, REFUGEE OR ASYLUM STATUS IS REQUIRED.</div>
<div></div>
<div>Eligibility to obtain and maintain a U.S. Security Clearance.</div>
<div></div>
<div>We&rsquo;re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.</div>
<div></div>
<div>No outside recruiters, please.</div></div></div></div><div></div>

Senior Flight Test Engineer

Quantum Packaging Technologies

Quantum Packaging Technologies Inc. is a leading pharmaceutical equipment brand company dedicated to developing innovative solutions such as inspection hoods, special machinery, as well as semi-automatic and automatic inspection machines. We are currently seeking a skilled and motivated Mechanical Design Engineer to join our manufacturing team. If you have a passion for precision engineering, mechanical assembly, and creating high-quality machinery, we encourage you to apply.Senior Mechanical Design EngineerWe are recruiting for Senior Mechanical Design Engineer, Successful candidates will need the following below to be considered:Key Responsibilities:<ul><li>Design &amp; Modeling: Create 3D models and 2D detailed drawings of parts, assemblies, and tools.</li><li>Analysis &amp; Simulation: Perform FEA (Finite Element Analysis) and CFD (Computational Fluid Dynamics) to simulate and validate performance. Keen understanding of GD&amp;T concepts</li><li>Prototyping &amp; Testing: Build, test, and troubleshoot prototypes to ensure functionality and reliability.</li><li>Documentation: Maintain technical documentation, including BOMs (Bill of Materials), design specifications, and engineering change orders.</li><li>Collaboration: Work with manufacturing, electrical, and project management teams to ensure design feasibility and project timelines.</li><li>Design for Excellence (DfX): Apply DFM (Design for Manufacturing) and DFA (Design for Assembly) principles.</li><li>Foster a positive team environment</li><li>Perform other duties as assigned</li></ul>Required Skills and Qualifications:<ul><li>Education: Bachelor&rsquo;s degree or Associates in Mechanical Engineering, Mechanical Design, Drafting or related field.</li><li>4-7 years minimum mechanical design, detail, checking and engineering experience with components, assemblies, drawing packages</li><li>Technical Proficiency: Strong expertise in CAD software (e.g., SolidWorks, Siemens NX Catia, AutoCAD).</li><li>Engineering Knowledge: Deep understanding of materials, mechanics, and manufacturing processes and GD&amp;T Concepts.</li><li>Analytical Skills: Ability to analyze data and perform engineering calculations.</li><li>Soft Skills: Strong problem-solving, communication, and project management capabilities.</li><li>Electrical, mechanical technical, or vocational training a plus</li><li>Certification training from a vocational training school or college with courses relevant to drafting and/or engineering principles preferred.</li></ul>Pay: $84,887.78 - $97,230.45 per yearBenefits:<ul><li>401(k)</li><li>Dental insurance</li><li>Flexible schedule</li><li>Health insurance</li><li>Paid time off</li><li>Vision insurance</li></ul>Experience:<ul><li>Mechanical engineering: 3 years (Preferred)</li></ul>Work Location: In person

3-5 YEARS OF EXPERIENCE REQUIRED - Senior Mechanical Design Engineer

The Home Depot

<div>Position Purpose:
The Senior New Product Development (NPD) Engineer is a business partner to merchandising team managing and supporting private brands engineering projects. The engineer will partner with internal teams to complete benchmarking, product requirement development, and resolution of product performance concerns for assigned product categories. The engineer will also utilize Bill of Materials as well as internal tools and data to understand raw material, manufacturing, labor, logistics, business and all total cost involved in manufacturing and shipping product. The engineer is responsible for conducting engineering evaluations to determine component and complete product assembly costs for Home Depot Products. Having good business acumen and financial knowledge of key terms will aid the engineer in relating the information to the Merchant community in a constructive and collaborative manner. The engineer works in a team environment as an individual contributor. 
Key Responsibilities:<ul><li>
50% Engineering project management including benchmarking, product requirement development, and test protocol development</li><li>
30% Conduct financial and value based calculations, summarize the findings for the business in presentation quality format and communicate findings to key stakeholders</li><li>
10% Complete resolution of product performance concerns</li><li>
10% Provide general product Engineering guidance and knowledge or evaluations as required to deliver short term business goals</li></ul> 
Direct Manager/Direct Reports:<ul><li>
Position Reports to Engineering Manager</li><li>
Position has no direct reports.</li></ul> 
Travel Requirements:<ul><li>
Typically requires overnight travel less than 10% of the time.</li></ul> 
Physical Requirements:<ul><li>
Most all of the time is spent sitting in the same position or standing/walking or there is some requirement to lift or handle material or equipment of moderate weight (8-20 pounds).</li></ul> 
Working Conditions:<ul><li>
Located in a comfortable indoor area. Any unpleasant conditions would be infrequent and not objectionable.</li></ul> 
Minimum Qualifications:<ul><li>
Must be eighteen years of age or older.</li><li>
Must be legally permitted to work in the United States.</li></ul> 
Preferred Qualifications:<ul><li>
Mechanical or Electrical Engineering or equivalent in a field of study related to the job</li><li>
Masters of Business Administration</li><li>
Product costing experience</li><li>
Extensive understanding of Bills of Materials</li><li>
Knowledge of Merchandising Financial terms</li><li>
Knowledge of INCO shipping terms</li><li>
Experience working in a manufacturing and/or product development environment including design for reduced Manufacturing and Assembly costs</li><li>
Experience working with OEM suppliers through the product development cycle</li><li>
Experience working with vertically integrated manufacturers</li></ul> 
Minimum Education:<ul><li>
The knowledge, skills and abilities typically acquired through the completion of a bachelor's degree program or equivalent degree in a field of study related to the job.</li></ul> 
Preferred Education:<ul><li>
No additional education</li></ul> 
Minimum Years of Work Experience:<ul><li>
5</li></ul> 
Preferred Years of Work Experience:<ul><li>
No additional years of experience</li></ul> 
Minimum Leadership Experience:<ul><li>
None</li></ul> 
Preferred Leadership Experience:<ul><li>
None</li></ul> 
Certifications:<ul><li>
None</li></ul> 
Competencies:<ul><li>
Excellent communication skills</li><li>
Ability to work in cross-functional team environment</li><li>
Business acumen and understanding of Merchandising</li><li>
Ability to use standard hand tools and lab equipment such as technical measuring equipment, power tools and pneumatic tools.</li><li>
Proficient with Microsoft Excel and PowerPoint</li><li>
Ability to use costing software such as Boothroyd Dewhurst DFM/DFMA</li><li>
Demonstrated manufacturing knowledge in areas such as plastics, metals, glass, wood, textiles and Printed Circuit boards</li></ul></div>

Senior NPD Engineer

Hudson Manpower

<div>We have an urgent opening for the position of QA Engineer &ndash; Test Bay Engineer for a reputed company in Dammam, Saudi Arabia.
Position: QA Engineer &ndash; Test Bay Engineer 
Location: Dammam, Saudi Arabia 
Industry: Transformer Manufacturing | Substation | LV Panels | Electrical Equipment
Job Responsibilities:<ul><li>Conduct all electrical routine tests on Transformers complying with international standards</li><li>Perform Type Tests &amp; Special Tests on Transformers, Substations &amp; LV Panels</li><li>Maintain Test Set-up and Test Facilities to complete daily output</li><li>Raise NCR (Non-Conformance Reports) whenever faults/failures are observed during testing</li><li>Instrument calibration and validation of measuring instruments</li><li>Prepare Routine Test Certificates, Type/Special Test Reports &amp; Inspection Test Plans (ITP)</li><li>Handle after-sales services / warranty support / troubleshooting visits</li><li>Ensure compliance with QMS / EMS / Safety requirements</li></ul>
Requirements:<ul><li>Minimum 5+ years of experience in QA / Production in Transformer, Substation, LV Panel manufacturing industry</li><li>Strong experience in Routine Tests, Type Tests &amp; Special Tests</li><li>Knowledge of Quality Assurance, Inspections, Testing &amp; International Standards</li><li>Awareness of ISO 9001, ISO 14001 &amp; Industrial Safety</li><li>BE / BTech / BS in Electrical Engineering</li></ul>
Company Benefits:<ul><li>Working Days: Sunday to Thursday</li><li>Working Hours: 7:30 AM to 5:00 PM</li><li>Overtime: Provided based on job requirement (x1.5)</li><li>Monthly HRA provided</li><li>Transportation Allowance provided</li><li>Medical Coverage as per company policy</li><li>Visa provided</li><li>Air Ticket provided</li><li>GAMCA Medical reimbursement upon arrival</li><li>Degree Attestation + Biometrics reimbursement upon submission of original invoice</li></ul>
Salary: 
Based on current salary, experience, and hiring manager recommendation.
Looking forward to your response. 
Requirements:<ul><li>Minimum 5+ years of experience in QA / Production in Transformer, Substation, LV Panel manufacturing industry</li><li>Strong experience in Routine Tests, Type Tests &amp; Special Tests</li><li>Knowledge of Quality Assurance, Inspections, Testing &amp; International Standards</li><li>Awareness of ISO 9001, ISO 14001 &amp; Industrial Safety</li><li>BE / BTech / BS in Electrical Engineering</li></ul></div>

QA Engineer / Test Bay Engineer | Dammam, Saudi Arabia

Flowserve

<div>Role Summary
The Senior Supplier Quality Engineer should provide facility support in the development, maintenance, improvement, and management of the QMS, and all applicable statutory and regulatory requirements related to supplied materials. He should be responsible for driving Supplier Quality Improvements, working directly with suppliers on Supplier/Process Approvals (Audit), Part Qualification (Flowserve Part Approval Process) [FPAP] and Non-Conforming Report (NCR) Resolution to include Containment, Root Cause, Corrective and Preventative Action. Identify trends within accountable Supplier population and were deemed appropriate, engage central Supplier Development Team for further detailed supplier improvement support activity. The Senior Supplier Quality Engineer should execute the supporting activities of measuring and improving products quality and business processes. The right candidate should have direct experience in Pump's OEM industry and should have Supplier QMS auditing experience and data analysis skills. The Senior Supplier Quality Engineer reports directly to the Quality Manager
Your Role:<ul><li>
Partner with Divisional &amp; Global Quality &amp; Supply Chain to analyze data on supplier performance and identify areas of focus.</li><li>
Lead the deployment of problem solving and improvement plans with site suppliers.</li><li>
Lead process and product audits to suppliers to verify compliance on Flowserve expectations.</li><li>
Facilitate and/or lead PPAP programs as dictated by procurement strategy (preventive) or quality performance (corrective).</li><li>
Support the update and maintenance of different Flowserve platforms: AVL, Assessment documentation, SCAR and CAPA registers.</li><li>
Work with a proactive approach with Site Supply Chain to assure Supplier KPIs compliance and reporting (Non-conformances, Rework, Scrap, First Pass Yield, Escapes, Warranties, Corrective Actions).</li><li>
Foster Continuous Improvement culture by leading projects associated with suppliers Cost of Poor Quality.</li><li>
Assure safety rules are followed as a moral authority in the suppliers&rsquo; facilities.</li><li>
Support maintaining all Quality certifications for the business (ISO 9001:2015, others site specific) as well as external audits (customer or third party).</li><li>
Review All Technical and Quality requirements as per Material Requisition (MR) during bidding and post-bidding stages.</li><li>
Responsible for Quality requirements realization and transfer them from Customer to Procurement process.</li><li>
Ensure all quality requirements are properly reviewed and embedded in Procurement processes.</li><li>
Review all Purchase Order (PO&rsquo;s) with all technical information from material Requisition prior PO issuance.</li><li>
Participate in Project Pass-Gates 1, 2, 3 &amp;4 and present quality risks if any.</li><li>
Review and confirm the Vendors and Manufacturers approval status prior PO placement.</li><li>
Coordination between the Vendors, Manufacturers, Third Party Inspector (TPI) and Client for Pre-inspection Meeting (PIM).</li><li>
Attending the PIM &amp; KOM with the Vendors/ Suppliers to discuss all quality requirements and procurement issues as well as required documentation.</li><li>
Participate in reviewing the NMR 601 documents when advised by Quality Manager.</li><li>
Review all Supplier&rsquo;s Inspection and Test Plans (ITP) and applicable Procedures (NDT, Welding, Painting, hydro test, etc..) prior submission to customers for further approval.</li><li>
Review of Material Test certificate (MTC) as necessary ahead of shipment when advised by Quality Manager</li><li>
Embrace and drive accountability and performance-based culture focused on operational excellence.</li><li>
Drive business philosophies, perspectives, imperatives, and leadership expectations to enable site and culture transformation.</li></ul>
Your Profile:<ul><li>
B.Sc. in Engineering field (manufacturing, industrial, or mechanical).</li><li>
Minimum of 7 years of experience in Supplier Quality Assurance preferably in Pump's OEM and/or manufacturing environment.</li><li>
Must be certified internal/Lead Auditor 9001:2015.</li><li>
Must have experience in project&rsquo;s Engineering and procurement cycle.</li><li>
Must possess knowledge in Saudi Aramco Standards Requirements. Approved Aramco Procurement Quality supervisor is highly preferred.</li><li>
Overall knowledge of API, ASME (Section II, V, VIII, IX) standards.</li><li>
Skilled in Team Oriented Problem Solving &amp; Corrective Action management (8D, A3).</li><li>
Prior experience leading APQP, PPAP, FAI, GD&amp;T, Control Plan (Core Tools)</li><li>
Proficient in corrective action request management, RCA and CAPA tools.</li><li>
Proficient in data analysis tools and techniques.</li><li>
Possess Knowledge of welding and NDE.</li><li>
Proficiency in Microsoft Office</li><li>
English bilingual, business conversation.</li><li>
Must be able to travel both domestically and international 50% of time.</li><li>
Outgoing proactive mindset and strong collaborative and communication skills.</li></ul>
Preferred Qualification/Skills<ul><li>
Knowledge of the established quality standards, laws, and regulations of national and international authorities.</li><li>
knowledge of inspection equipment found in machining, assembly and test operations of pumps and associated accessories.</li><li>
Flexible, eager to learn, accurate, analytical with positive, can-do attitude.</li><li>
Flexibility and willingness to travel.</li><li>
Good interpersonal, communication, negotiation, analytical and presentation skills.</li><li>
Operational Excellence &amp; High Level of Customer Service Standard.</li><li>
Certification in Welding inspection i.e., AWS CWI or CSWIP 3.1</li><li>
Certification in Painting inspection i.e., NACE Level II, SSPC Level II or equivalent.</li><li>
Knowledge in Saudi Aramco Standards requirements.</li><li>
Lean Six Sigma Black Belt certification or Certified Quality Engineer or equivalent.</li><li>
Organizational and planning skills</li></ul>
We Offer:<ul><li>
Supportive and collaborative work environment</li><li>
Clear career development and internal growth opportunities</li><li>
Strong commitment to sustainability and responsible business practices</li><li>
Opportunity to be part of a global organization with a strong market reputation</li><li>
High standards for health, safety, and quality</li><li>
Inclusive and respectful workplace culture</li><li>
Work alongside experienced professionals and industry expert.</li></ul></div>

Senior Supplier Quality Engineer

Advansys ME

Advansys is a dynamic solutions provider focused on delivering smart, modular, and sustainable technology solutions that enhance operations, improve customer experiences, and drive business modernization. With over 400 skilled engineers, we serve 100+ enterprise customers across 14 countries. Specialized in a wide array of premium services including Business Automation, Industrial Digitization, Low code Development, Cloud Services, Warehouse Automation & Strategic Outsourcing.
 
Founded in 2014, Advansys is part of the INTRO Group, a private conglomerate established in 1980 with diverse investments across different business areas, including oil and gas, real estate, specialized engineering, financial investment, food and manufacturing.
 
We are seeking a motivated Junior Automation QA Engineer to support the development and
 
maintenance of automated test scripts and frameworks. The candidate will work closely with senior
 
QA and development teams to ensure software quality and improve regression efficiency through
 
automation. This role is ideal for candidates with foundational programming knowledge and a
 
strong interest in test automation and quality engineering.
 
Requirements
 
QUALIFICATIONS
 
Bachelor’s degree in computer science, Information Technology, Engineering, or a related field
 Relevant certifications in software testing (e.g., ISTQB, CSTE) are a plus.
 
EXPERIENCE
 
1–3 years of experience in QA or Automation Testing.
 
Technical Skills
 
Basic knowledge of programming (Java, Python, or C#).
 Understanding of Selenium or similar automation tools.
 Basic knowledge of API testing.
 Familiarity with SDLC and Agile methodology.
 Understanding of version control systems (Git preferred)..
 
Soft Skills
 
Strong willingness to learn and grow.
 Good analytical and problem-solving skills.
 Attention to detail.
 Good communication skills.
 Team collaboration mindset.
 
KPIs for Senior Automation QA
 
Automation script completion rate.
 Test execution accuracy.
 Defect reporting quality.
 Automation coverage growth contribution
 Learning & certification progress.
 Benefits
 Hybrid working model
 Social and medical insurance
 Transportation

Junior Automation Tester

Search 10000+ Senior manufacturing test engineer jobs near you this May. New roles added regularly across leading industries. Apply today.