senior mechanical design engineer

ARTELIA

<div>1- QUALIFICATIONS 
<ul>
<li>
Bachelor's degree in Mechanical Engineering</li>
<li>More than 10 years of experience in design of Pumping stations, Wastewater treatment plants, District Cooling Plants, infrastructure, etc.</li>
<li>Experience with HVAC and Pumps design</li>
<li>Experience in rehabilitation projects</li>
<li>Experience working within engineering consultancies is mandatory</li>
<li>Experience in projects in GCC, mainly in UAE and KSA</li>
<li>Knowledge of relevant Saudi and UAE Standards</li>
<li>HAP software experience</li>
<li>Knowledge of hydraulic and surge analysis software&rsquo;s is a plus</li></ul> 


2- RESPONSIBILITIES 
<ul>
<li>
Lead the mechanical design of water and wastewater treatment facilities</li>
<li>Design pumping stations, lift stations, treatment plants, desalination support facilities, reservoirs, and associated mechanical infrastructure</li>
<li>Prepare mechanical design criteria and basis of design reports</li>
<li>Perform equipment sizing calculations and selection for: pumps, blowers, mixers, compressors, screens, grit removal equipment, clarifiers, sludge handling equipment, odor control systems, chemical dosing systems, UV disinfection systems, building HVAC</li>
<li>Prepare equipment layouts and plant arrangements</li>
<li>Design piping systems, valve arrangements and mechanical utilities</li>
<li>Prepare equipment and valve schedules</li>
<li>Prepare Building HVAC layouts</li>
<li>Prepare BOQs</li>
<li>Prepare specifications for Mechanical equipment</li>
<li>Prepare Datasheets for Mechanical equipment</li>
<li>Coordinate with end clients and suppliers</li>
<li>Perform Value Engineering studies</li>
<li>Provide support in proposals/tenders</li></ul></div>

Senior Mechanical Design Engineer

Arec Engineering Consultants

Location: Dubai, UAE Job Type: Full-timeAREC Engineering Consultant is looking for a Senior Mechanical Design Engineer with 7+ years of experience in Mechanical Building Services Design.Requirements:<ul><li>Minimum 7+ years of Mechanical Design experience.</li><li>Dubai consultancy experience is mandatory.</li><li>Consultancy background is required.</li><li>Strong proficiency in Revit (MEP) and AutoCAD.</li><li>Solid experience in HVAC, Plumbing &amp; Fire Fighting Design.</li><li>Good knowledge of Dubai Authority regulations (DEWA, DCD, Dubai Municipality).</li></ul>Responsibilities:<ul><li>Prepare mechanical design drawings, calculations, and tender documents.</li><li>Design HVAC, Plumbing &amp; Fire Fighting systems.</li><li>Coordinate with multidisciplinary teams using Revit (MEP).</li><li>Review shop drawings and ensure compliance with Dubai standards.</li></ul>Job Type: Full-timeWork Location: In person

Senior Mechanical Engineer

Burtville Development

Senior MEP EngineerCompany: Burtville Development Location: Abu Dhabi, United Arab EmiratesJoin Burtville DevelopmentAt Burtville Development, we are committed to creating exceptional residential communities through innovation, quality, and engineering excellence. As one of Abu Dhabi's growing real estate developers, we are looking for an experienced Senior MEP Engineer to become a key member of our engineering team.This is an excellent opportunity for a driven professional who is passionate about delivering high-quality developments and enjoys collaborating with multidisciplinary teams throughout the project lifecycle.Key ResponsibilitiesAs our Senior MEP Engineer, you will:<ul><li>Lead the design, coordination, and technical review of Mechanical, Electrical, Plumbing (MEP), Drainage, Fire Protection, and ELV systems from concept design through tender documentation.</li><li>Ensure seamless coordination between MEP, Architectural, Structural, Interior Design, and BIM teams.</li><li>Review engineering calculations, equipment selections, system sizing, routing, and service coordination to ensure efficient and practical designs.</li><li>Ensure all MEP designs comply with Abu Dhabi authority requirements, including ADM, ADDC, Civil Defense, Estidama, and other applicable regulations.</li><li>Manage authority submissions, technical comments, approvals, and resubmissions.</li><li>Conduct multidisciplinary coordination meetings and proactively resolve design conflicts.</li><li>Review BIM models, shop drawings, and clash detection reports to ensure coordination accuracy and project quality.</li><li>Prepare and review technical specifications, Bills of Quantities (BOQs), and equipment schedules.</li><li>Provide technical guidance and mentorship to design engineers, BIM coordinators, and drafting teams.</li><li>Support procurement and construction teams by providing technical clarifications and value engineering solutions.</li><li>Present engineering recommendations and technical solutions to management, consultants, and project stakeholders.</li><li>Ensure projects are delivered in accordance with company standards, project requirements, applicable codes, and agreed timelines.</li></ul>What We're Looking ForThe ideal candidate will have:<ul><li>Bachelor's Degree in Mechanical Engineering or a related engineering discipline.</li><li>Minimum 8 years of relevant experience, preferably within the UAE.</li><li>Extensive experience in MEP design and coordination for residential and mixed-use developments.</li><li>Strong technical knowledge of HVAC, Electrical, Plumbing, Drainage, Fire Protection, and ELV systems.</li><li>In-depth understanding of Abu Dhabi authority regulations and approval processes.</li><li>Proficiency in AutoCAD, Revit MEP, Navisworks, and other relevant engineering software.</li><li>Excellent leadership, communication, problem-solving, and coordination skills.</li><li>Ability to manage multiple projects while maintaining high standards of quality and accuracy.</li></ul>SalaryCompetitive salary, commensurate with qualifications and experience, will be discussed during the interview.Work Location: In person

Senior Mechanical Engineer (MEP) - Site Based

McDermott International, Ltd

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Senior Principal Mechanical Engineer is tasked with solving unique and complex problems that broadly impact the business. They must proactively identify and solve the most complex problems that impact the Management and direction of the business. The Senior Principal Mechanical Engineer is considered a specialist in the field of Mechanical (Eng), and they offer a broad base of knowledge about the Engineering Function. The Senior Principal Mechanical Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
 </li>
 <li>
 Apply expertise to the most complex problems
 </li>
 <li>
 Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
 </li>
 <li>
 Develop and manage plans to achieve business objectives
 </li>
 <li>
 Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Direct large Mechanical Engineering team as a Lead Engineer
 </li>
 <li>
 Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standard
 </li>
 <li>
 Plan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager
 </li>
 <li>
 Ensure interfaces and deliverables are clearly identified
 </li>
 <li>
 Maintain responsibility for progress and productivity, identifying any required corrective action
 </li>
 <li>
 Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc
 </li>
 </ul>
 <li>
 Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution
 </li>
 <li>
 Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates
 </li>
 <li>
 Provide similar support for Variation Orders
 </li>
 <li>
 Interface with all disciplines to develop clash-free designs
 </li>
 <li>
 Interface with other departments to obtain input for Discipline designs and drawings
 </li>
 <li>
 Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required
 </li>
 <li>
 Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
 </li>
 <li>
 Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements
 </li>
 <li>
 Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications
 </li>
 <li>
 Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
 </li>
 <li>
 Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope
 </li>
 <li>
 Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
 </li>
 <li>
 Provide technical direction and review of Designers producing products related to Mechanical Engineering
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve design reports and procedures
 </li>
 <li>
 Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
 </li>
 <li>
 Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
 </li>
 <li>
 Assist in updating weight report based on receipt of vendor information
 </li>
 <li>
 Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary
 </li>
 <li>
 Review and (as Lead Engineer) approve design verification through single-discipline check/ inter&shy; discipline check (IDC)
 </li>
 <li>
 Provide technical support to fabrication queries
 </li>
 <li>
 Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and workforce-related
 </li>
 <li>
 Assist in providing inputs for actual, Planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved
 </li>
 <li>
 Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements
 </li>
 <li>
 Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures
 </li>
 <li>
 Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
 </li>
 <li>
 Capture lessons learned and enter into MDR's Lessons Learned system
 </li>
 <li>
 Provide leadership, mentoring, and guidance to other Engineers
 </li>
 <li>
 Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables
 </li>
 <li>
 Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities
 </li>
 <li>
 Monitor costs of own work processes
 </li>
 <li>
 Evaluate costs associated with products and solutions
 </li>
 <li>
 Assist in the maintenance of departmental technical guidelines
 </li>
 <li>
 Participate in development and maintenance of Global Procedures, Software, and Standards
 </li>
 <li>
 Incorporate approved Lessons Learned into MOR Level 2 &amp; 3 engineering procedures, as applicable
 </li>
 <li>
 May participate in standards development committees or task groups
 </li>
 <li>
 Recognized as having good communication and presentation skills (e.g., published technical papers are clearly written, actively participates in conferences and/or seminars, and/or is a capable
 </li>
 <li>
 Present design solutions or topics at "lunch and learns"; etc.)
 </li>
 <li>
 Assist the Department Manager in identifying departmental needs, including the development of personnel and technical capabilities
 </li>
 <li>
 Participate in McDermott forums and represent McDermott as a subject matter expert (SME)
 </li>
 <li>
 Provide information on employee performance to the Discipline Manager
 </li>
 <li>
 Assist the Discipline manager in interviewing job applicants
 </li>
 <li>
 Participate in Factory Acceptance Testing of various items as assigned
 </li>
 <li>
 Identify vendor assistance for installation, pre-commissioning, and commissioning purposes
 </li>
 <li>
 Update electrical load list, P&amp;IDs, and equipment lists based on receipt of vendor information
 </li>
 <li>
 Participate in HAZOP meetings, as necessary
 </li>
 <li>
 Participate in 3D model reviews, as necessary
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Act as project-based Discipline point of contact in communications and meetings with Customer counterparts
 </li>
 <li>
 Ensure substantive communications are documented
 </li>
 <li>
 Prepare bids and project's Discipline engineering budget and execution plans, updating as required
 </li>
 <li>
 Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager
 </li>
 <li>
 Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets
 </li>
 <li>
 Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan
 </li>
 <li>
 Prepare working forecasts identifying change management plans, corrective action, and real-time schedule
 </li>
 <li>
 Provide Discipline inputs for actual, planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Alert the project team of any deviation from the scope or a need for a change order
 </li>
 <li>
 Monitor progress measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others
 </li>
 <li>
 Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs
 </li>
 <li>
 Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required
 </li>
 <li>
 Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and design Reviews
 </li>
 <li>
 Review comments from Customers &amp; other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation
 </li>
 <li>
 Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning
 </li>
 <li>
 Anticipate project engineering needs and plan accordingly
 </li>
 <li>
 Coordinate with vendor for discipline-managed/procured items
 </li>
 <li>
 Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members
 </li>
 <li>
 Check and Approve Mechanical equipment list, spare parts list, and special tools list
 </li>
 <li>
 Check and Participate in Approval of detailed engineering documents/ deliverables such as:
 </li>
 <ul>
 <li>
 Mechanical Equipment Specifications and datasheets
 </li>
 <li>
 Mechanical handling philosophy report and associated requisitioning for handling equipment
 </li>
 <li>
 Noise report prepared by a consultant to ensure it complies with Project requirements
 </li>
 <li>
 Lubrication schedule, spare parts schedule
 
 </li>
 </ul>
 </ul>
 </ul>
 Reports to:
 
 
 Project: Lead Engineer, Project Engineering Manager or Project Manager
 
 
 Functional: Supervising Engineer or Department Manager
 
 
 Liaise With: All Engineering disciplines, Safety Department, Project Management Team, Document Control, Project Planner,
 
 
 Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors, Vendors, and Customers
 
 
 Supervises: Principal Mechanical Engineers, Senior Mechanical Engineers and Mechanical Engineers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor's Degree or Master's Degree in Engineering
 </li>
 <li>
 20+ years of experience in oil and gas with a major contractor or consultants predominantly performing detail design
 </li>
 <li>
 Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable to offshore
 </li>
 <li>
 Knowledgeable in project coordination and execution skills
 </li>
 <li>
 Recognized across the company as a key lead, highly innovative designer, or highly skilled analyst
 </li>
 <li>
 Preferably Registered Professional Engineer or member of professional engineering society as applicable
 </li>
 <li>
 Seasoned knowledge of engineering standards and specifications
 </li>
 <li>
 Good knowledge of engineering software
 </li>
 <li>
 Good working knowledge of the English language
 </li>
 <li>
 HSE, TQM, and cost-conscious
 </li>
 <li>
 Good organizer, motivator, and supervisor
 </li>
 <li>
 Keen on improving the effectiveness of the work
 </li>
 <li>
 Show flexibility and ensure proper hand-over with regards to:
 </li>
 <ul>
 <li>
 The replacement of colleagues during illness and holidays
 </li>
 <li>
 The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
 </li>
 <li>
 The managing/learning of current working methods and software applications
 </li>
 <li>
 The reassignment to other McDermott offices
 
 </li>
 </ul>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Principal Mechanical Engineer

CDM Smith

We are seeking an experienced Senior Mechanical Engineer with a strong background in roads, utility systems, bridges, and highways. The ideal candidate will lead mechanical engineering , execution, and supervision across large-scale infrastructure projects, ensuring compliance with industry standards and delivering high-quality outcomes.Key Responsibilities<ul><li>Design Development: Prepare and review mechanical designs for utility services (water, sewage, HVAC, fire protection, pumping stations).</li><li>Project Execution: Supervise installation, commissioning, and maintenance of mechanical systems across infrastructure projects.</li><li>Coordination: Work closely with civil, structural, and electrical engineers to ensure seamless integration of mechanical systems.</li><li>Quality Control: Conduct inspections, testing, and validation of mechanical works to meet project specifications.</li><li>Documentation: Prepare technical reports, drawings, and compliance documentation.</li><li>Regulatory Compliance: Ensure adherence to local codes, safety standards, and international guidelines (ASHRAE, ASTM, ISO).</li><li>Team Leadership: Mentor junior engineers and manage contractors to achieve project milestones.</li></ul>Qualifications<ul><li>Bachelor&rsquo;s or Master&rsquo;s degree in Mechanical Engineering.</li><li>8&ndash;12 years of experience in infrastructure projects (roads, bridges, highways, utilities).</li><li>Proficiency in engineering software (AutoCAD, Revit, STAAD, Primavera).</li><li>Strong knowledge of mechanical systems design and execution.</li><li>Proven ability in project management, budgeting, and scheduling.</li><li>Strong knowledge and experience working for of RTA, Aldar, and DM regulations.</li></ul>Employment Details<ul><li>Location: Abu Dhabi.</li><li>Type: Full-time, permanent.</li><li>Please submit your CV, current salary, expected salary and notice period to: hr-uae-recruitment@cdmsmith.com Only shortlisted candidates will be contacted.</li></ul>Work Location: In person

Sr. Mechanical Engineer

Wood

<div>
 
 Job Description
 
 
 
 Wood is currently hiring for a
 
 Senior Mechanical Engineer Rotary
 
 for a secondment role in Muscat Oman.
 
 
 Duration of this assignment is 1 year
 
 
 
 Responsibilities
 
 
 
 Senior Mechanical Engineer-Rotary executes the activities and processes associated with Mechanical and Rotating engineering at Project, under TL scope. Apply and expand hands-on experience in Engineering, Procurement, Construction, commissioning and Operation in Oil and Gas industry. Responsible for supporting and execute general engineering activities directly linked to Mechanical engineering.
 
 
 
 Designing the future. Transforming the world
 
 
 
 Reflecting the market focus for the brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in refinery and petrochemical industry.
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
 </li>
 <li>
 Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
 </li>
 <li>
 Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
 </li>
 <li>
 Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
 </li>
 <li>
 Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 
 
 </li>
 </ul>
 
 Typical Responsibilities
 
 
 
 <ul>
 <li>
 Apply Mechanical Engineering Rotating practices, standards, and design codes.
 </li>
 <li>
 Challenge the project design assumptions and strive to bring more values to the project (value engineering)
 </li>
 <li>
 Provide innovative solutions to overcome project challenges including cost and schedule while still maintaining compliance to the design codes.
 </li>
 <li>
 Assist Mechanical engineers in delivering and reviewing engineering deliverables.
 </li>
 <li>
 Compile information from contractor reports; evaluate and analyze compiled information using Mechanical Engineering standards and codes.
 </li>
 <li>
 Provide directions and actively participate in the engineering reviews and meetings and take lead when required.
 </li>
 <li>
 Contribute to record the meetings and discussions
 </li>
 <li>
 Coordinate, prepare, and make a recording of engineering reviews as assigned by the Lead Mechanical Engineering Rotating.
 </li>
 <li>
 Follow up on the turnover of the Mechanical engineering documents.
 </li>
 <li>
 Participate in equipment selection and procurement process.
 </li>
 <li>
 Attend workshop and site inspection of Mechanical facilities as the plan permits.
 </li>
 <li>
 Attend FAT and SAT of equipment as required.
 </li>
 <li>
 Inspect project site to monitor HSE, progress, and ensure conformance to design specifications and project standards.
 </li>
 <li>
 Prepare and deliver presentations on certain subjects as the project develops.
 </li>
 <li>
 Other relevant duties as requested from time to time.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Experience
 
 
 
 <ul>
 <li>
 Minimum 15 years of experience in similar projects
 </li>
 <li>
 Mechanical Engineering Degree with relevant certification
 </li>
 <li>
 Experience in refinery and petrochemical projects preferred
 </li>
 <li>
 TA 2 certification is preferred.
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com
 
 
 
 Diversity Statement
 
 
 
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>

Senior Mechanical Engineer -Rotary

Flash specialist Industrial equipment & Machines manufacturing LLC

We're Hiring: Senior Design Engineer &ndash; SPM &amp; Material Handling EquipmentJoin our growing engineering team and contribute to the design and development of innovative Special Purpose Machines (SPM) and Material Handling Equipment.PositionSenior Design Engineer (1 Position)LocationUnited Arab EmiratesExperience Required<ul><li>Minimum 6+ years of relevant experience.</li><li>Strong experience in Special Purpose Machines (SPM) and Material Handling Equipment is mandatory.</li></ul>Preferred Industry BackgroundCandidates should have experience in one or more of the following industries:<ul><li>Conveyors Manufacturing</li><li>Packing Machines Manufacturing</li><li>Filling Machines Manufacturing</li><li>Material Handling Equipment</li><li>Engineering &amp; Industrial Machinery</li><li>Fabrication Industry</li></ul>Key Responsibilities<ul><li>Design and develop Special Purpose Machines (SPM) and Material Handling Equipment.</li><li>Prepare detailed 2D drawings and 3D models using CAD software.</li><li>Design conveyor systems, automation equipment, and custom machinery.</li><li>Generate BOMs and manufacturing drawings.</li><li>Coordinate with production, fabrication, procurement, and project teams.</li><li>Support machine assembly, installation, and commissioning activities.</li><li>Ensure designs comply with quality, safety, and customer specifications.</li><li>Optimize designs for manufacturability, cost, and performance.</li></ul>Preferred Skills<ul><li>Hands-on experience in SPM and conveyor system design.</li><li>Strong knowledge of mechanical design principles, fabrication, and manufacturing processes.</li><li>Proficiency in AutoCAD, SolidWorks, or similar 3D CAD software.</li><li>Knowledge of pneumatic systems and machine automation is an advantage.</li><li>Excellent problem-solving and communication skills.</li></ul>Salary &amp; Benefits<ul><li>Salary: AED 4,000 &ndash; AED 5,000 per month</li><li>Accommodation: Free furnished bachelor accommodation</li><li>Food: By candidate</li><li>Working Hours: 8:00 AM &ndash; 6:00 PM (1-hour lunch break)</li><li>Probation Period: 6 months</li><li>Annual Benefits:</li><li>30 days paid annual leave</li><li>Return airfare upon successful completion of one year of service</li></ul>Employment TypeFull-time | PermanentIf you have a passion for machine design and proven experience in SPM and material handling equipment, we'd love to hear from you.Apply now by sending your CV to shiva@conveyors.ae or apply via LinkedIn Easy Apply.Pay: AED4,000.00 - AED5,000.00 per monthWork Location: In person

Senior Design Engineer

Search 10000+ Senior mechanical design engineer jobs near you this July. New roles added regularly across leading industries. Apply today.