service rig operator

Green Valley

Job Title: Rig Operator &ndash; CivilJob Summary:The Rig Operator is responsible for operating piling, drilling, or boring rigs safely and efficiently for civil construction projects such as foundations, piling, soil investigation, and ground improvement works.Key Responsibilities:<ul><li>Operate piling / drilling / rotary rigs as per site requirements</li><li>Ensure accurate positioning and depth as per drawings and engineer instructions</li><li>Conduct daily inspection and basic maintenance of rig equipment</li><li>Follow safety procedures and site regulations at all times</li><li>Coordinate with site engineers, foremen, and helpers</li><li>Monitor soil conditions and report abnormalities</li><li>Maintain work logs and equipment usage records</li><li>Ensure work is completed within project timelines</li></ul>Requirements:<ul><li>More than 2 Years proven experience in UAE as a Rig Operator in civil construction</li><li>Knowledge of piling, drilling, or foundation works</li><li>Ability to read basic drawings and follow instructions</li><li>Valid heavy equipment operator license (if applicable)</li><li>Physically fit and safety-conscious</li><li>Willingness to work extended hours if required</li><li>Need Immediate Joiner</li><li>Should be currently available in UAE</li><li>UAE Driving License (Mandatory)</li></ul>Job Type: Full-timePay: AED5,000.00 - AED7,000.00 per month

Rig Operator

Khalfan Abdullah General Contracting & Transport Est.

We are currently looking for an experienced Crane Operator to join our team for oilfield rig operations.Position: Crane Operator Location: Oilfield Rig Experience: Minimum 2 years (Oil &amp; Gas / Rig experience preferred) Certification: Valid Crane Operator License / Certification Salary: AED 3,000 TO 5,000 To be discussed after interviewKey Responsibilities:<ul><li>Operate mobile / crawler / rig cranes safely during rig operations</li><li>Perform lifting, hoisting, and load handling as per lifting plans</li><li>Follow HSE rules, lifting procedures, and site safety standards</li><li>Conduct daily crane inspections and pre-start checks</li><li>Ensure proper use of rigging gear, slings, and shackles</li><li>Coordinate with riggers, signalmen, and supervisors</li><li>Report equipment defects, incidents, or unsafe conditions</li><li>Maintain operation logs and inspection records</li></ul>Requirements:<ul><li>Valid Crane Operator license / certification</li><li>Minimum 2 years of experience in oilfield / rig operations</li><li>Strong knowledge of safe lifting practices and load charts</li><li>Good English communication skills</li><li>Physically fit and able to work in rig environment</li><li>Safety-focused mindset</li></ul>Job Types: Full-time, PermanentPay: AED3,000.00 - AED5,000.00 per month

Mobile Crane Operator

Halliburton

<div>We are looking for the right people &mdash; people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world&rsquo;s largest providers of products and services to the global energy industry.<div><div><div><h2 class="jobSectionHeader">
Job Duties</h2></div><div><ul><li>
Under direct supervision, rigs-up and rigs-down surface and down hole well logging equipment on work locations for the purpose of recording information about sub-surface geologic formations.
</li><li>Rigs-up and rigs-down surface and down-hole well logging equipment including electric, nuclear, sonic, other well logging tools, and pressure control equipment.
</li><li>Operates well logging equipment at job site.
</li><li>Assembles down hole well logging tools (electric, nuclear, sonic, and other well logging tools).
</li><li>Maintains, cleans and performs preventative maintenance on down-hole and surface well logging equipment.
</li><li>Performs pre and post job vehicle and equipment inspections and associated paperwork and/or reports.
</li><li>Learns how to operate pressure control equipment.
</li><li>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.</li><li>
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.</li><li>
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
</li><li>Promotes and takes an active part in quality improvement processes</li></ul></div></div><div><div><h2 class="jobSectionHeader">
Qualifications</h2></div><div>
Work Authorization: Candidates who are not legally authorized to work in the United States will not be considered. Halliburton will not sponsor applicants for work visas for this position. 
<ul><li>
High school diploma or equivalent is required</li><li>
6 months of experience as an Operator Assistant II - Logging and Perforating required</li><li>
Class A CDL (Commercial Driver's License) is required</li><li>
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required</li></ul> 
Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Service Operator I or Service Operator II.</div></div><div><div><h2 class="jobSectionHeader">
World Class Benefits
</h2></div><div>At Halliburton, we're committed to providing you and your family with a comprehensive and affordable benefits package - which means we offer support for your physical, emotional, financial and parental needs, both now and in the future. When you join our team, you'll have access to a wide range of resources designed to help you thrive at work and at home. 
By clicking here, you can review a summary of the benefits available once you join.</div></div></div> 
Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. 
Location
101 Holt Rd, Victoria, Texas, 77905-5555, United States 
Job Details
Requisition Number: 204494 
Experience Level: Experienced Hire 
Job Family: Operations 
Product Service Line: Wireline and Perforating 
Full Time / Part Time: Full Time
Additional Locations for this position: 
Compensation Information 
Compensation is competitive and commensurate with experience.</div>

Service Operator (I-II) Logging & Perforating

WTS Energy

<div>
 
 Location: India
 
 
 2/28 Rotation
 
 
 
 
 
 Responsibilities
 
 
 The responsibilities of Subsea Supervisor are as a minimum:
 
 <ul>
 <li>
 Ensuring the safe, efficient and cost-effective deployment of Subsea XT and upper completion equipment on the rig.
 </li>
 <li>
 Supervision and monitoring of XT installations and well upper completion/workover/P&amp;A operations in accordance with company objectives and policies.
 </li>
 <li>
 Ensure all rig-upgrade requirements are addressed to handle Subsea and Upper completion equipment. Interface with Rig contractor and other Subsea Contractors to ensure deliveries are met.
 </li>
 <li>
 Oversight and planning of onshore preparation and offshore installation of Subsea Equipment in collaboration with the Drilling/Completions, O&amp;M/Projects teams as well as the Drilling Contractor, Third Party Subsea Company and Equipment suppliers.
 </li>
 <li>
 Installation and testing of IWOCS control panel, umbilical reeler on the rig while interfacing with rig personnel.
 </li>
 <li>
 Installation and testing of Completion/Workover Riser or Subsea Landing String equipment (including control panel and electrohydraulic umbilical reeler) on the rig.
 </li>
 <li>
 Testing of all functions of Lower Landing String Assembly (LLSA) and LLSA along with Tubing Hanger.
 </li>
 <li>
 Preparing Standing Instructions for Driller ahead of each Subsea operation.
 </li>
 <li>
 Running and installation of subsea XT.
 </li>
 <li>
 Testing and calibration (wherever necessary) of ROV tooling.
 </li>
 <li>
 Preparing the landing string tally.
 </li>
 <li>
 Pick-up, make-up and running of LLSA/THRT/TH and ULSA through the Rotary Table on the rig.
 </li>
 <li>
 Supervising all pressure-tests after the setting of TH in the XT.
 </li>
 <li>
 Supervising all ROV operations on the XT.
 </li>
 <li>
 Supervising all Slickline operations such as installation/retrieval of crown plugs and TH Isolation Sleeve.
 </li>
 <li>
 Supervising contingency operations using Wireline or Coiled Tubing for installation/retrieval of crown plugs.
 </li>
 <li>
 Ensuring that the well is completed and handed over to the field Operations &amp; Maintenance department after the placement of fully tested barriers.
 </li>
 <li>
 Preparing and submitting daily subsea reports to office.
 </li>
 <li>
 Visiting intervention vessel for any supervisory activities, when necessary.
 </li>
 <li>
 Supervising testing and maintenance activities in contractors' bases/workshops.
 </li>
 <li>
 Coordinate with office based and rig site personnel to ensure the optimal execution of the Tree Installation &amp; Upper completions program.
 </li>
 <li>
 Participate in regular audits/reviews and incident investigations in relations to Subsea discipline.
 </li>
 <li>
 The person will report to the Head - Rig Operations Deepwater and functionally report to Sr. Lead Subsea Engineer.
 </li>
 <li>
 Responsible for the documented close out of Lessons Learned, vendor/equipment-related audits and support the Rig Operations teams on all audit close-out actions as required.
 </li>
 </ul>
 
 
 
 
 
 Competency/Skill Requirement
 
 
 <ul>
 <li>
 Engineering or industry-related qualification.
 </li>
 <li>
 Minimum 15 Years Industry experience in subsea well drilling and upper completion operations with a strong background in Subsea Completion operations.
 </li>
 <li>
 Should have been the Subsea Supervisor for at least 3 other projects with an Operator.
 </li>
 <li>
 Experience of developing and implementation of procedures and work instructions.
 </li>
 <li>
 Should have expertise in Subsea Horizontal Xmas Tree systems, IWOCS and Subsea Test Tree and landing string equipment.
 </li>
 <li>
 Capable of performing space-out calculations and accounting for tidal movements for floaters.
 </li>
 <li>
 Should have expertise in Subsea wells equipment and Rig BOP&rsquo;s and other rig interfaces.
 </li>
 <li>
 Familiar with ROVs, ROV tooling and interfaces.
 </li>
 <li>
 Familiar with the procedures, operations and limitations of Contractor's service tools and packers and capable of troubleshooting.
 </li>
 <li>
 Should be familiar with the installation and operation of Upper Completion equipment e.g. production packer, deep set pressure assisted SCSSV, downhole gauges, CIM etc.
 </li>
 <li>
 Should be familiar with the tubing running procedures and experienced in interpreting torque-turn graphs.
 </li>
 <li>
 Should have expertise in Slickline, E-line and Coiled Tubing operations (with pressure control equipment) especially on a floater.
 </li>
 <li>
 Should be familiar with the industry standards (API, ISO etc.) for XMT and upper completion equipment.
 </li>
 <li>
 Should have experience of Quality Plans, QA/QC processes for Landing strings, XMTs, TH, ITC and ROV Tooling.
 </li>
 <li>
 Should be familiar with DTL, CWOP, AAR, Risk Analysis application etc.
 </li>
 <li>
 Should have good understanding of well construction process and upper completions.
 </li>
 </ul>
</div>

Subsea Supervisor

<div>
 We are looking for the right people &mdash; people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world&rsquo;s largest providers of products and services to the global energy industry.
 
 
 
 Job Duties
 
 
 
 
 JOB DESCRIPTION:
 
 
 
 <ul>
 <li>
 Under direct supervision, assists during the rigging up and down of Subsea Safety Systems (SSS) service line equipment on work locations for the purpose of maintaining control of wellbore fluids and providing means for well intervention and interfacing during well testing operations, by the use of (but not limited to): Subsea Well Control equipment.
 </li>
 <li>
 Assists in repair and maintenance of other Testing and Subsea service line equipment as needed.
 </li>
 <li>
 Works in the Testing and Subsea workshop assisting in the repair of SSS equipment.
 </li>
 <li>
 Rigs SSS service line equipment as needed in local area.
 </li>
 <li>
 Performs in the rigging up and rigging down on a location of service line equipment and in the clean up, repair, and preparation of equipment for the next job.
 </li>
 <li>
 Assembles and prepares, as directed, equipment for installation and service.
 </li>
 <li>
 Drives a truck or other assigned equipment as required.
 </li>
 <li>
 Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
 </li>
 <li>
 Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
 </li>
 <li>
 Promotes and takes an active part in quality improvement processes.
 </li>
 <li>
 Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability of operations.
 </li>
 <li>
 Skills are typically acquired through completion of high school or similar education and 1 &frac12; years of Subsea Safety Systems experience.
 </li>
 <li>
 Must be able to visually identify various SSS components by type and size and explain function of each.
 </li>
 <li>
 Must have demonstrated ability to work safely with hand tools.
 </li>
 <li>
 Must follow all Health, Safety and Environment best practices, be able to complete Job Safety Analysis (JSA) on prescribed tasks and demonstrate Safety in Lifting.
 </li>
 <li>
 Must be able to explain the function of the mobilization documentation.
 </li>
 <li>
 Must be capable of understanding/navigating HMS, iLearn and Competency sites on HalWorld.
 </li>
 <li>
 Must have successfully passed company tests or met task guideline requirements.
 </li>
 <li>
 Must have successfully completed Oilfield Primer, Essential Math and Red Book training (as per local requirements).
 </li>
 <li>
 Must have met the minimum competency requirements for Operator Asst-Subsea Systems II.
 </li>
 <li>
 Should be knowledgeable of most types of SSS services provided in local area.
 </li>
 <li>
 The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
 </li>
 <li>
 Basic reading comprehension and writing skills are required.
 </li>
 <li>
 Basic computer skills are required.
 </li>
 <li>
 Licensure to drive commercial vehicles may be required.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation
 
 .
 
 
 
 Location
 
 
 
 Bestepe, Yasam Cad. 13A-77, Ankara, Ankara, 06560, T&uuml;rkiye
 
 
 
 Job Details
 
 
 
 
 Requisition Number:
 
 203883
 
 
 
 Experience Level:
 
 Entry-Level
 
 
 
 Job Family:
 
 Support Services
 
 
 
 Product Service Line:
 
 Testing and Subsea
 
 
 
 Full Time / Part Time:
 
 Full Time
 
 
 
 Additional Locations for this position:
 
 
 
 
 Compensation Information
 
 
 
 Compensation is competitive and commensurate with experience.
</div>

Service Operator I-Subsea Safety Sys

<div>We are looking for the right people &mdash; people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world&rsquo;s largest providers of products and services to the global energy industry.<div><div><div><h2 class="jobSectionHeader"> 
Job Duties</h2></div><div> 
JOB DESCRIPTION: 
<ul><li>
Under direct supervision, assists during the rigging up and down of Subsea Safety Systems (SSS) service line equipment on work locations for the purpose of maintaining control of wellbore fluids and providing means for well intervention and interfacing during well testing operations, by the use of (but not limited to): Subsea Well Control equipment.</li><li>
 Assists in repair and maintenance of other Testing and Subsea service line equipment as needed. Works in the Testing and Subsea workshop assisting in the repair of SSS equipment. Rigs SSS service line equipment as needed in local area.</li><li>
 Performs in the rigging up and rigging down on a location of service line equipment and in the clean up, repair, and preparation of equipment for the next job.</li><li>
Assembles and prepares, as directed, equipment for installation and service. Drives a truck or other assigned equipment as required.</li><li>
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.</li><li>
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.</li><li>
Promotes and takes an active part in quality improvement processes.</li><li>
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability of operations.</li><li>
Skills are typically acquired through completion of high school or similar education and 1 &frac12; years of Subsea Safety Systems experience.</li><li>
Must be able to visually identify various SSS components by type and size and explain function of each.</li><li>
Must have demonstrated ability to work safely with hand tools. Must follow all Health, Safety and Environment best practices, be able to complete Job Safety Analysis (JSA) on prescribed tasks and demonstrate Safety in Lifting.</li><li>
Must be able to explain the function of the mobilization documentation.</li><li>
Must be capable of understanding/navigating HMS, iLearn and Competency sites on HalWorld. Must have successfully passed company tests or met task guideline requirements.</li><li>
Must have successfully completed Oilfield Primer, Essential Math and Red Book training (as per local requirements).</li><li>
Must have met the minimum competency requirements for Operator Asst-Subsea Systems II.</li><li>
Should be knowledgeable of most types of SSS services provided in local area.</li><li>
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.</li><li>
Basic reading comprehension and writing skills are required.</li><li>
Basic computer skills are required.</li><li>
Licensure to drive commercial vehicles may be required.</li></ul></div></div><div><div><h2 class="jobSectionHeader">
Qualifications</h2></div></div></div> 
Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. 
Location
Bestepe, Yasam Cad. 13A-77, Ankara, Ankara, 06560, T&uuml;rkiye 
Job Details
Requisition Number: 204479
 
Experience Level: Entry-Level 
Job Family: Operations 
Product Service Line: [[division]]
 
Full Time / Part Time: Full Time
Additional Locations for this position: 
Compensation Information 
Compensation is competitive and commensurate with experience.</div>

Baker Hughes

<div>Job Requirements 
 
Do you relish the prospect of working with advanced cutting-edge energy technology products?
Do you enjoy being part of a team that ensures the highest quality? 
Join our Pressure Pumping Team ! 
Bringing the most cutting-edge physical and digital technologies together to create oilfield equipment is the beating heart of our work. Devising smarter systems that control and monitor oil and gas extraction, our surface pressure capabilities are industry-leading and commercially innovative. Our Cladding team insures high-quality standers throughout the manufacturing process. 
Partner with the best 
As a field operator you will carry out the operations on machined parts to a high degree of quality. You'll be able to work under your own initiative to meet the production schedule of the plant. You will have the opportunity to develop your skills whilst working on some innovative products.
As a field operator, you will be responsible for:<ul><li>
Setting up, monitoring and operating multiple machines simultaneously to ensure safety and on-time delivery.</li><li>
Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance</li><li>
Conducting safety and risk assessment and preparing preventive and proactive measures to identify potential hazards.</li><li>
Assisting in rig-up and rig-down of coiled tubing equipment at the wellsite.</li><li>
Performing pre-job inspections, function tests, and pressure testing of all equipment.</li><li>
Monitoring pump rates, tubing depth, weight, and well parameters during operations.</li><li>
Mixing and pumping fluids, chemicals, or nitrogen as required for the job program.</li></ul> 

Work Experience 
 
Fuel your passion 
To be successful in this role you will:<ul><li>
Have a minimum of a high school diploma</li><li>
Have experience with operating nitrogen pumps for a minimum of 2 years is preferred</li><li>
Have experience with operating coiled tubing equipment for a minimum of 2 years</li><li>
Have experience with coil units for a minimum of 2 years</li><li>
Have experience in rig-up and rig-down of coiled tubing equipment at the wellsite.</li><li>
Have experience mixing and pumping fluids, chemicals, or nitrogen as required for the job program is preferred
</li><li>Be able to operate coiled tubing unit, injector head, reel, control console, and pressure control equipment (BOP, stripper, lubricator).</li><li>
Be able to learn from mistake, hardworking, able to work in shift under pressure.</li><li>
Be able to raise maintenance request for any major equipment breakdown.</li></ul> 
Work in a way that works for you 
We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:<ul><li>
Shift-based - 6 weeks on, 4 weeks off (rotational shift)</li></ul> 
Working with us 
Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. 
Working for you 
Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<ul><li>
Contemporary work-life balance policies and wellbeing activities</li><li>
Comprehensive private medical care options</li><li>
Safety net of life insurance and disability programs</li><li>
Tailored financial programs</li><li>
Additional elected or voluntary benefits</li></ul></div>

Field Operator - Pressure Pumping

Search 10000+ Service rig operator jobs near you this January. New roles added regularly across leading industries. Apply today.

10000 service rig operator jobs NEAR_ME

Rig Operator

Mobile Crane Operator

Service Operator (I-II) Logging & Perforating

Subsea Supervisor

Service Operator I-Subsea Safety Sys

Service Operator I-Subsea Safety Sys

Field Operator - Pressure Pumping