station engineer

Air Arabia

<div>
 Air Arabia is first and largest Low Cost Carrier (LCC) in Middle East and North Africa. We fly you to over 170 destinations spread across the Middle East, North Africa, Asia and Europe. We offer our passengers a journey which is efficient reliable and offer great value for money across our network.
 
 
 The millions of passengers who have chosen to fly with Air Arabia have helped us make a difference and set a mark in the aviation industry internationally. Air Arabia is the first publicly listed airline in the region providing the carrier an independent path to growth and profitability.
 
 
 Air Arabia is not only committed to providing affordable air travel but is also dedicated to uplifting the lives of those who are less fortunate. Taking responsibility and lead on social needs of local and international communities has been part of our success.
 
 
 
 Job Purpose
 
 
 
 Carries out and supervises Line-level maintenance tasks on Air Arabia and 3rd party aircrafts within the CAR 66 &lsquo;B1&rsquo; License Category, ensuring the required work is performed, certified and recorded accurately and timely in accordance with Air Arabia and regulatory requirements
 
 
 
 Key Result Responsibilities
 
 
 
 
 Operational Excellence
 
 
 
 <ul>
 <li>
 Reviews assigned maintenance work with the Maintenance Manager Line &amp; Outstations/MCC Manager to gain full understanding of tasks, their relative priorities, documentation requirements and cautions, prior to starting work.
 </li>
 <li>
 Prepares and performs scheduled aircraft maintenance, ensuring that the required documentation, parts, tools and GSE are obtained and used for each task.
 </li>
 <li>
 Performs defect troubleshooting and rectification in accordance with Aircraft Maintenance Manuals and instructions provided by the MCC and Engineering departments.
 </li>
 <li>
 Protects airworthiness, ensuring aircrafts are dispatched in a fully compliant condition and configuration, inspected and tested in accordance with approved maintenance procedures.
 </li>
 <li>
 Signs off maintenance tasks performed or supervised within the scope of own authorisation, verifying that the aircraft technical log and associated documents have been completed to the required standard following completion of all maintenance.
 </li>
 <li>
 Manages communications with LSM, other Technicians, Flight Crew and MCC related to the assigned tasks, providing accurate, timely reports on the readiness and airworthiness of the aircraft.
 </li>
 <li>
 By proper work planning, decision making and communications, ensures that maintenance tasks are carried out whenever possible within the planned ground time to avoid operational delay.
 
 
 </li>
 </ul>
 Key Result Responsibilities - Continued
 
 
 
 Safety
 
 
 
 <ul>
 <li>
 Manages the safety of assigned maintenance activities, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.
 </li>
 <li>
 Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.
 </li>
 <li>
 Manages human factors aspects of maintenance, ensuring that the continuity of critical maintenance tasks is protected, by avoidance of task interruption and the proper use of handover procedures.
 
 
 </li>
 </ul>
 
 Reputation and Teamwork
 
 
 
 <ul>
 <li>
 Internal Customer Service: provides positive and proactive support to other operational teams in ABY, providing helpful professional advice, suggestions and solutions.
 </li>
 <li>
 Leadership: provides sound supervision and guidance of Technicians assigned to support own tasks. Ensures they are adequately briefed to perform the non-certifying maintenance tasks.
 </li>
 <li>
 Representing Air Arabia: presents a positive and competent image of technical professionalism to ABY Flight Crews, other companies&rsquo; personnel and ABY customers.
 
 
 </li>
 </ul>
 
 Cost Awareness
 
 
 
 <ul>
 <li>
 Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.
 
 
 </li>
 </ul>
 
 Qualifications (Academic, Training, Languages)
 
 
 
 <ul>
 <li>
 Holds /has held an EASA Part 66 or GCAA CAR 66 B1 Aircraft Maintenance License and company maintenance approvals on the Airbus A320.
 </li>
 <li>
 Note: must commit to ensure any limitations removed from license within 9 months of induction.
 </li>
 <li>
 Ability to obtain an unrestricted GCAA CAR 66 B1 Category License.
 </li>
 <li>
 Able to demonstrate in-depth knowledge of airframe and engine systems and maintenance practices.
 </li>
 <li>
 Ability to read, write, speak and understand English to a good standard for technical communications.
 </li>
 <li>
 Good computer skills (Microsoft Office).
 </li>
 <li>
 Ability to obtain UAE Driver&rsquo;s License.
 
 
 </li>
 </ul>
 
 Work Experience
 
 
 
 
 External applicants
 
 
 
 <ul>
 <li>
 At least 2 years&rsquo; experience certifying maintenance on the Airbus A320 family of aircraft.
 </li>
 <li>
 At least 5 years&rsquo; experience in a Line or Base Maintenance environment.
 </li>
 </ul>
</div>

Station Engineer - Chittagong

Barq Al Mustaqbal Co.

Mechanical Design EngineerCompany: Barq Al Mustaqbal Co. Location: Tabuk, Kingdom of Saudi ArabiaBarq Al Mustaqbal Co. is looking for an experienced Mechanical Design Engineer to handle water pipeline and pump station projects in Tabuk and across Saudi Arabia.Key Responsibilities<ul><li>Design water pipelines, pumping systems, and pump stations</li><li>Prepare detailed mechanical drawings, layouts, and technical specifications</li><li>Perform hydraulic calculations and sizing for pumps, valves, and pipelines</li><li>Coordinate with Civil, Electrical, and Instrumentation teams for seamless integration</li><li>Review and approve shop drawings, material submittals, and technical documentation</li><li>Ensure designs comply with Saudi standards, ASME, AWWA, and local authority requirements</li><li>Provide technical support during construction and commissioning</li><li>Liaise with consultants, contractors, and clients for approvals</li></ul>Job Requirements<ul><li>Bachelor&rsquo;s degree in Mechanical Engineering</li><li>Minimum 5&ndash;8 years experience in water pipeline and pump station projects (Gulf/Saudi experience preferred)</li><li>Strong knowledge of hydraulic calculations, pumps, valves, and pipeline networks</li><li>Proficient in AutoCAD; Revit MEP is an advantage</li><li>Experience with pump station design software or hydraulic modeling tools preferred</li><li>Understanding of Saudi Building Code (SBC), ASME, AWWA standards</li><li>Valid Saudi Iqama</li><li>Transferable Iqama (Naqal Kafala mandatory)</li><li>Available for immediate or short-notice joining</li></ul>Job Details<ul><li>Job Type: Full-time</li><li>Industry: Water / Infrastructure / Construction / MEP</li><li>Location: Tabuk</li></ul>How to ApplyHaroon: +966 54 340 7660 Hanif: +971 55 914 1655 Email: job@barqm.comJob Type: Full-time

Mechanical Design Engineer

Arvind Human Resources

Job Title : Mechanical Engineer (Hydraulic) Reports To : Project Manager Position SummaryThe Mechanical (Hydraulic) Engineer is responsible for the design review, installation, testing, and commissioning of mechanical systems associated with water and wastewater pumping stations. The role involves ensuring that all hydraulic and mechanical work is executed in accordance with design specifications, project requirements, and relevant codes and standards. The engineer coordinates between design, procurement, and construction teams to deliver technically sound and reliable pumping systems.Key Responsibilities1. Design Review, Technical &amp; Installation Support<ul><li>Review and interpret design drawings, hydraulic calculations, and technical specifications for pumping station systems.</li><li>Evaluate pump selection, head loss calculations, and piping layouts for optimal hydraulic performance.</li><li>Ensure design compliance with project specifications, client requirements, and relevant international standards (e.g., ASME, API, AWWA, BS EN).</li><li>Review vendor submittals, equipment data sheets, and shop drawings for mechanical equipment and piping systems.</li><li>Oversee and supervise mechanical works related to pumps, valves, piping networks, fittings, and associated equipment including alignments</li><li>Conduct site inspections and ensure installation complies with quality and safety standards.</li><li>Prepare material requisitions and technical evaluations for pumps, valves, pipes and other mechanical equipment, etc.</li><li>Liaise with suppliers and manufacturers for technical clarifications and equipment selection.</li><li>Review and approve factory acceptance tests (FAT) and performance data sheets.</li><li>Prepare method statements, ITPs (Inspection &amp; Test Plans) review, and technical reports.</li><li>Maintain as-built documentation, equipment manuals, and maintenance guidelines.</li><li>Prepare and execute testing and commissioning procedures for pumps, valves, and other equipment for mechanical systems.</li><li>Conduct hydrostatic, leak, and performance tests for piping and pumping systems, assist in trouble shooting and coordinate with electrical &amp; instrumentation teams.</li><li>Ensure all mechanical work is performed in accordance with project quality standards and HSE requirements. Conduct risk assessments and enforce safe work practices</li></ul>Qualifications and Experience<ul><li>Bachelor&rsquo;s degree in mechanical engineering (specialization in hydraulics preferred).</li><li>Minimum 15 years of experience in mechanical and hydraulic systems for water or wastewater pumping station projects.</li><li>Strong knowledge of centrifugal and submersible pumps, valves, piping systems, and hydraulic calculations, analysis and modeling.</li><li>Proficiency in AutoCAD, Hydraulic modeling software (e.g., Water CAD, EPANET), and MS Office.</li><li>Experience working with international codes and standards (AWWA, ASME, API, BS EN, ISO), proficiency in CAD and Hydraulic modeling software.</li></ul>SALARY DEPENDS ON EXPERIENCE.Job Type: Full-time

Mechanical Engineer (Hydraulic)

Work Life Group NL

<div>
 
 Would you like to join the leading international intergovernmental organization?
 
 
 
 The NATO SATCOM Engineer serves as the principal technical authority for Satellite Ground Station (SGS) operations and maintenance. Reporting to the Ground Service Delivery Manager, the incumbent is responsible for advising senior leadership, supervising all maintenance activities, and ensuring the highest standards of technical performance and personnel proficiency.
 
 
 
 Responsibilities:
 
 
 
 <ul>
 <li>
 Advise SAC Commander and Ground SDM on all matters related to the operations and maintenance of the SGS;
 </li>
 <li>
 Act as technical advisor to SAC Commander, and lead all technical activities involving managing and supervising the maintenance of the SGS communications systems and sub-systems, and the supporting non-CIS facilities (HVAC, UPS, AC Power Sub-systems, etc.);
 </li>
 <li>
 Supervise performance of preventive and corrective maintenance of SGS equipment;
 </li>
 <li>
 Provide technical guidance and assistance to all SGS maintenance staff;
 </li>
 <li>
 Perform maintenance tasks and emergency interventions as required;
 </li>
 <li>
 Monitor operational performance and working standards of site technicians;
 </li>
 <li>
 Provide feedback to NCI Academy Oeiras through Ground SDM for training program improvements, and ensure maintenance personnel comply with prescribed maintenance procedures;
 </li>
 <li>
 Establish, monitor, and conduct On-the-Job-Training (OJT) programs to compliment official NCI Academy training program, and to ensure all personnel are proficient in their duties;
 </li>
 <li>
 Review all site/system operational and maintenance instructions to ensure accuracy of content and compliance with relevant NCI Agency Operating Instructions;
 </li>
 <li>
 Supervise up-keep of equipment and circuit installation/activation records;
 </li>
 <li>
 Be responsible for all test equipment onsite; maintain calibration records and manage Metrology Exchange Package (MEP) as directed in relevant NCI Agency Operating Instructions
 </li>
 <li>
 Provide assistance to the Ground SDM, SATCOM ESOC, CSSC, staff in connection with engineering change proposals relevant to operations and maintenance;
 </li>
 <li>
 Assist with upgrade/replacement projects during prototyping, trial, site surveying, installation and commissioning phases as agreed by NCI Agency Configuration Control Boards;
 </li>
 <li>
 Deputize for higher grade staff, if required;
 </li>
 <li>
 Performs other duties as may be required
 
 
 </li>
 </ul>
 
 Essential Qualifications &amp; Experience:
 
 
 
 <ul>
 <li>
 A minimum requirement of a Bachelor's degree at a nationally recognised/certified University in a related discipline and 3 years post-related experience; Or exceptionally, the lack of a university degree may be compensated by the demonstration of a candidate's particular abilities or experience that is/are of interest to NCI Agency, that is, at least 10 years extensive and progressive expertise in duties related to the function of the post;
 </li>
 <li>
 At least 3 years' experience in the operation or maintenance of satellite ground terminals/stations or related systems, such as radars or Line-Of-Sight systems;
 </li>
 <li>
 Proven experience on Antenna sub-system, including: Radome, feed horn, reflector, pedestal, waveguides, tracking receiver, servo and drive equipment;
 </li>
 <li>
 Proven experience on Transmit and receive chains, including: up and down converters, Low Noise Amplifiers, High Power Amplifiers;
 </li>
 <li>
 Proven experience on MODEMs, Electronic Protected Modem Systems (EMS), cryptographic equipment, routers, switches;
 </li>
 <li>
 Proven experience on Computer-assisted Monitor and Control System (M&amp;CS);
 </li>
 <li>
 Proven experience on GPS-disciplined Frequency Reference Standards, and associated distribution systems;
 </li>
 <li>
 Experience in TCP/IP fundamentals, including security; video transmission principles; and telecommunications quality assurance practices;
 </li>
 <li>
 Experience on Servo-mechanisms; and Emergency power generating systems;
 </li>
 <li>
 Experience in The development, implementation, fielding, testing and maintenance of modern communications equipment;
 </li>
 <li>
 Experience on on-line performance, accounting, fault, security and configuration management of digital networks and associated transmission systems, to include; packet switching systems in support of voice &amp; data transfer;
 </li>
 <li>
 Familiarity with related international/commercial/industrial standards
 
 
 </li>
 </ul>
 If you've read the description and feel this role is a great match, we'd love to hear from you! Click "Apply for this job" to be directed to a brief questionnaire. It should only take a few moments to complete, and we'll be in touch promptly if your experience aligns with our needs.
</div>

SATCOM Engineer for NATO with security clearance (relocation to Belgium)

NAFFCO Fire Fighting Equipment Safety Systems

Fire Pump Electrical Engineer (Design, QC &amp; Commissioning)We are seeking a highly skilled Fire Pump Electrical Engineer with strong expertise in Design, Quality Control, and Commissioning of fire pump systems. The ideal candidate will bring hands‑on technical experience, strong analytical skills, and a solid understanding of NFPA standards and fire protection system requirements.Key Responsibilities<ul><li>Electrical design of fire pump systems including control panels, wiring diagrams, and system layouts.</li><li>Conduct QC inspections for fire pump installations, ensuring compliance with project specifications and NFPA standards.</li><li>Perform commissioning activities for fire pumps, controllers, and associated electrical systems.</li><li>Troubleshoot and resolve technical issues during installation, testing, and commissioning stages.</li><li>Coordinate with project, mechanical, and QA/QC teams to ensure smooth execution of works.</li><li>Prepare technical reports, test sheets, and documentation required for approvals and handover.</li></ul>Qualifications &amp; Experience<ul><li>Bachelor&rsquo;s degree in Electrical Engineering or related field.</li><li>Minimum 3&ndash;5 years of experience in fire pump systems (design, QC, commissioning).</li><li>Strong knowledge of NFPA 20, NFPA 70, and related standards.</li><li>Experience with fire pump controllers (electric, diesel, jockey).</li><li>Proficiency in electrical design tools and MS Office.</li><li>Excellent communication and coordination skills.</li></ul>Why Join Us<ul><li>Opportunity to work on major fire protection projects.</li><li>Collaborative and growth‑oriented work environment.</li></ul>Job Type: Full-time

Fire Pump Electrical Engineer (Design, QC & Commissioning)

K-LOVE & Air1 Christian Radio Network

<div>Overview:
<div>
Join Our Dynamic Team as a Broadcast Studio Engineer I!</div><div></div><div> 
Are you passionate about audio and video production? Do you thrive in fast-paced environments where your quick and responsive attitude can make a real difference? As a Broadcast Studio Engineer I, you'll play a crucial role in ensuring top-notch broadcast and production quality for EMF studios. You'll support our programming studio engineer and Broadcast Studio Engineer II, contributing to a seamless and efficient work environment across all audio systems. If you're ready to elevate your career and be part of an innovative team, apply now!</div><div></div><div> 
**This is a full-time, onsite position. Candidates must live within 30 minutes of Camarillo, CA .**</div><div></div><div> 
What will you do?</div><ul><li>
Assists the Director of Service Excellence and Studio Architect with activities concerning maintenance, installation, and modification of EMF broadcast studios, production environment and audio/video media application throughout the EMF studio facilities both in Franklin and at remote sites.</li><li>
Assists Studio Engineers with audio/video and network wiring applications throughout the broadcast and production environment, this includes duties such as wire pulling, connector termination and testing for continuity and phase.</li><li>
Performs fabrication of audio, video and control wiring to EMF&rsquo;s Proprietary standards.</li><li>
Works with Studio Engineers to develop documentation of EMF wiring and audio/video infrastructure systems.</li><li>
Performs tasks associated with installation of new broadcast and production room studio equipment.</li><li>
Performs installation of computer KVM systems, and computer VGA signal distribution.</li><li>
Performs tech set-up and support for ISDN and voice over IP interviews and voice over sessions.</li><li>
Assists Studio Engineers with audio/video streaming and presentation/staff meeting support in EMF multipurpose room and Pledge Drive Room. This includes a quick and responsive attitude in responding to the needs of department other that programming using these facilities.</li><li>
Assists Studio Manager with maintenance and file management of MAC OS X and Digidesign Pro tools production systems and other DAW Software.</li><li>
Assist Studio department with broadcast automation system configurations and software/hardware support in programming environment.
</li><li>Assist On-Air Talent with on air problems related to microphones, line level devices, phone record and playback systems, scheduling issues, automation log delivery and audio asset delivery.</li><li>
In addition to daily work schedules may be &ldquo;on call&rdquo; for any problems that of immediate nature concerning EMF broadcast facilities.</li><li>
Provide Desktop Support assistance as needed.</li><li>
Perform other duties as assigned.</li></ul><div></div><div> 
What are we looking for?</div><ul><li>
AA degree in related field; or equivalent experience.</li><li>
Previous experience in a radio broadcast setting preferred.</li><li>
Ability to speak both English and Spanish preferred.</li><li>
Minimum of 2 years of experience working with broadcast studio technology as an audio/video technician and/or audio technician, and/or equivalent education and training.</li><li>
Strong organizational and administrative skills.</li><li>
Excellent interpersonal skills with the ability to develop sincere business/ministry relationships.</li><li>
Demonstrated knowledge of media production, Audio mixers, analog and digital audio distribution and theory, audio/video asset delivery.</li><li>
Experience installing, maintaining and repairing broadcast and/or recording studio equipment. Specific software experience with Broadcast automation, FTP, HTTP, Mac OS X, MS Visio or CAD, digital audio workstations and plug ins, i.e.: AVID Pro Tools, Sony Soundforge, Adobe audition, Cubase, Apple Logic, Nuendo, Waves, Native instruments.</li><li>
Solid understanding and experience with computer hardware repair, KVM systems, Audio cards, USB and Firewire audio devices, audio patchbays and routers.</li><li>
Demonstrated knowledge and experience working with studio technology, ability to solder, read line drawings and create wire lists, fabricate broadcast and production studios from wiring line drawings and rack set up documentation.</li><li>
Familiarity with computer networking both Windows and Apple.</li><li>
Experience working in a fast paced, multi-project environment with the ability to manage shifting priorities.</li><li>
Experience supporting a 24x7 environment is desired.</li><li>
Demonstrated understanding and experience implementing industry best practice.</li><li>
Knowledge of Broadcasting trends, technology, products, and services is required.</li><li>
Strong interpersonal skills with the ability to develop sincere business/ministry relationships. Experience working with creative people under high pressure situations.</li></ul><div></div><div> 
What can we offer you?</div><ul><li>
Industry leading Medical, Dental &amp; Vision coverage</li><li>
Short/long term disability and life insurance</li><li>
Robust 401K with company match</li><li>
Parental leave with Baby Bonding pay</li><li>
Generous PTO, holiday and sick pay</li><li>
Unique company culture that includes exclusive access to concerts, movie premieres, media industry events, and more</li><li>
Leadership and Career Development Programs including free access to LinkedIn Learning platform</li></ul><div></div><div> 
Why work for K-LOVE?</div><div>
K-LOVE is a nonprofit, multi-platform media company on a mission to draw people closer to Christ. Founded in 1982 in Santa Rosa, CA, with a single radio station, K-LOVE today owns and operates the nation's two largest Christian music radio networks (K-LOVE and Air1) with over 1,000 broadcast signals across all 50 states and beyond, streaming audio reaching around the world, and a growing family of media ministries including podcasts, books, films, concerts, and events. EMF employs nearly 500 team members between its offices in Nashville, TN, Rocklin, CA, and field locations around the country. You can view our mission and values here Mission, Beliefs &amp; Values.</div><div></div><div> 
&ldquo;As an Equal Opportunity Employer, EMF makes employment decisions based on merit and other legitimate reasons. The Company is committed to a diverse and inclusive work environment and the promotion of equal employment opportunities regardless of protected class, characteristic or status. However, EMF is also a religious non-profit organization where all team members contribute to the Company&rsquo;s mission of encouraging our audiences &ldquo;to have a meaningful relationship with Christ.&rdquo; Therefore, pursuant to the Civil Rights Act of 1964, Section 702 (42 U.S.C. 2000e I(a)), EMF has the right to hire only candidates who agree with the Company&rsquo;s Statement of Faith. Also, as a religious non-profit organization, the Company is not governed by the CA Fair Employment and Housing Act.&rdquo;</div></div>

Broadcast Studio Engineer I

Carrier

About Us:At Carrier, we are the world leader in healthy, safe, sustainable, and intelligent building and cold chain solutions, with our customers at the heart of everything we do. SLD Pumps & Power, a Carrier company, is one of the UK's leading suppliers of pumps and generator rental equipment.About the role:We are currently recruiting an experience Service Engineer for our Paisley depot to support both depot-based and field-based operations across Scotland, on occasions there will be travel required across Scotland which may include Livingston, Glasgow, Aberdeen, Inverness, and Falkirk. This is an excellent opportunity for a mechanically skilled engineer with diesel engine experience looking to develop their career.What you'll be doing:<ul> <li>Service, maintain, and repair pumps, generators, and diesel-powered equipment in both depot and field-based environments.</li> <li>Prepare and inspect equipment at the depot to ensure it is fully operational before deployment.</li> <li>Carry out major overhauls and refurbishments of end-of-life equipment.</li> <li>Diagnose faults and perform repairs to minimise equipment downtime.</li> <li>Collaborate effectively with the service team, hire controller, and foreman to ensure smooth operations.</li> <li>Ensure compliance with Health & Safety regulations and company policies at all times.</li> </ul><ul> <li>Maintain a clean and organised working environment, ensuring all equipment meets safety and quality standards.</li> <li>Travel to customer sites and participate in an on-call rota (1 week in 4).</li> </ul>You'll have:<ul> <li>Mechanical experience, ideally working with plant equipment, pumps, generators, and diesel engines.</li> <li>Relevant qualifications such as NVQ Level 3, an M&E related apprenticeship or equivalent.</li> <li>Full UK Driving licence</li> </ul>Our benefits<ul> <li>Competitive salary package (Negotiable DOE)</li> <li>Enhanced payments through overtime and on-call</li> <li>Company Vehicle</li> <li>25 Days Holiday + bank holiday + holiday purchase scheme</li> <li>Company Pension</li> <li>Great career progression opportunities, development and continuous training offered</li> </ul> Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:

Power and Pumps Service Engineer

Search 6411+ Station engineer jobs near you this January. New roles added regularly across leading industries. Apply today.