test operator

SteerAI

<div>
 
 
 About SteerAI
 
 
 
 
 
 
 SteerAI is an autonomous mobility technology company powered by VentureOne, the commercialization arm of the Advanced Technology Research Council. SteerAI&rsquo;s advanced AI-powered autonomy stack, developed by the Technology Innovation Institute, empowers the logistics and defense industries by turning industrial vehicles into autonomous powerhouses that can handle complex off-road missions, transform operations and protect organizations' most important assets: their workforce.
 
 
 
 
 
 
 About the role
 
 
 
 
 
 
 We are looking for a Autonomous Vehicle Operator to operate SteerAI&rsquo;s unmanned ground vehicle platforms during operational trial campaigns. This hands-on role involves operating vehicles through the Command and Control (C2) system and Fleet Management System (FMS), monitoring autonomous missions, supporting test execution, and performing field-level vehicle preparation
 
 
 
 
 
 
 Key Responsibilities
 
 
 
 
 
 <ul>
 <li>
 
 Vehicle Operation:
 
 Operate Avs and other robots through the OCU/C2/FMS interface and remote control during tests and trials. Monitor autonomous mission execution and intervene when required, following established safety protocols.
 </li>
 <li>
 
 Pre-Mission Preparation:
 
 Execute field deployment checklists, run system health checks, verify sensor functionality, and confirm communication links. Ensure vehicles are trial-ready prior to each mission run.
 </li>
 <li>
 
 Real-Time Monitoring and Intervention:
 
 Monitor vehicle telemetry, autonomy state, and environmental conditions during missions. Execute emergency procedures (e-stop, return-to-base) when safety thresholds are reached.
 </li>
 <li>
 
 Data Collection and Instrumentation:
 
 Position and configure telemetry equipment, manage onboard recording systems, and verify data integrity post-mission. Support the Field Test Engineer in executing instrumentation plans and validating that data capture meets trial requirements.
 </li>
 <li>
 
 Maintenance and Troubleshooting:
 
 Perform field maintenance, troubleshoot hardware and software issues, and escalate technical problems to the engineering team. Maintain vehicle readiness between trial runs.
 </li>
 <li>
 
 Test Execution Support:
 
 Assist the Field Test Engineer with scenario setup, adherence to test procedures, and documentation of mission observations. Be prepared to take on basic test coordination duties when required, including running pre-briefed scenarios and recording results against success criteria.
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 
 
 
 <ul>
 <li>
 Technical diploma or bachelor&rsquo;s degree in Robotics, Mechatronics, Electrical Engineering, Systems Engineering, or related field.
 </li>
 <li>
 4+ Experience operating unmanned ground or aerial vehicles, robotic systems, or remote-controlled platforms.
 </li>
 <li>
 Familiarity with autonomous vehicle systems, sensor suites (cameras, GNSS, lidar), and communication systems.
 </li>
 <li>
 Comfortable working in outdoor field environments in various weather conditions.
 </li>
 <li>
 Methodical approach to checklists, procedures, and safety protocols.
 </li>
 <li>
 Troubleshooting skills for electromechanical and software systems.
 </li>
 <li>
 Exposure to structured test procedures, checklists, or test and evaluation frameworks.
 </li>
 <li>
 Ability to document observations, log test results, and contribute to post-mission reporting.
 </li>
 <li>
 Valid driver&rsquo;s license.
 </li>
 </ul>
 
 
 
 
 
 What we offer
 
 
 
 
 
 
 We offer a competitive salary, a comprehensive benefits package, and the opportunity to work alongside some of the brightest minds in the Autonomous Robotics industry. Our work culture is collaborative and inclusive, with a strong focus on innovation and personal growth.
 
 
 If you're passionate about advancing the frontiers of Autonomous Robotics and eager to leave a lasting mark in this domain, seize the opportunity and apply today to join us in sculpting the future of this dynamic field!
 
</div>

Autonomous Vehicle Operator , SteerAI

Al Sahraa Group

<div>
 Position:
 
 Forklift Operator
 
 
 
 location: UAE - Abu Dhabi
 
 
 salary: 2660 AED
 
 
 Rotation: 90/30
 
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 Operate a forklift to move, load, and unload materials and products
 </li>
 <li>
 Inspect and maintain the forklift, reporting any issues or malfunctions
 </li>
 <li>
 Follow all safety protocols and procedures while operating the forklift
 </li>
 <li>
 Ensure proper loading and unloading procedures are followed
 </li>
 <li>
 Keep track of inventory and assist with inventory management
 </li>
 <li>
 Maintain a clean and organized work area
 </li>
 <li>
 Communicate effectively with team members and supervisors
 </li>
 <li>
 Adhere to all company policies and procedures
 </li>
 <li>
 Perform other duties as assigned by the supervisor
 
 
 
 </li>
 </ul>
 Requirements:
 
 
 <ul>
 <li>
 High school diploma or equivalent
 </li>
 <li>
 Valid forklift operator certification
 </li>
 <li>
 Minimum of 10 years of experience as a forklift operator
 </li>
 <li>
 At least 5 years of experience in oil and gas field
 </li>
 <li>
 Strong knowledge of forklift operations and safety procedures
 </li>
 <li>
 Ability to lift and move heavy objects
 </li>
 <li>
 Excellent hand-eye coordination and attention to detail
 </li>
 <li>
 Must be able to pass a background check and drug test
 
 
 
 </li>
 </ul>
 Benefits:
 
 
 <ul>
 <li>
 Two - way flight ticket
 </li>
 <li>
 Health insurance
 </li>
 <li>
 Paid time off
 </li>
 <li>
 Training and development opportunities
 </li>
 <li>
 Career advancement potential
 </li>
 <li>
 Dynamic and supportive work environment
 
 </li>
 </ul>
</div>

FORKLIFT OPERATOR

<div>
 
 
 About SteerAI
 
 
 
 
 
 
 SteerAI is an autonomous mobility technology company powered by VentureOne, the commercialization arm of the Advanced Technology Research Council. SteerAI&rsquo;s advanced AI-powered autonomy stack, developed by the Technology Innovation Institute, empowers the logistics and defense industries by turning industrial vehicles into autonomous powerhouses that can handle complex off-road missions, transform operations and protect organizations' most important assets: their workforce.
 
 
 
 
 
 
 About the role
 
 
 
 We are looking for an Integration &amp; Test Engineer to integrate, commission, test, and document SteerAI&rsquo;s autonomous ground vehicle platforms. This role spans the full lifecycle, from software integration and vehicle commissioning through operational trial execution, post-mission reporting, and technical documentation. The role supports both internal trials and commercial customer deployments.
 
 
 
 
 
 
 Key Responsibilities
 
 
 
 
 
 <ul>
 <li>
 
 Software Integration:
 
 Integrate autonomy software, and configuration packages into the different platforms. Verify software builds against release notes, run integration tests, and resolve compatibility issues across hardware and software subsystems.
 </li>
 <li>
 
 Commissioning:
 
 Lead end-to-end vehicle commissioning for both trial campaigns and commercial customer deployments. Execute system health checks, sensor calibration, communication link verification, and acceptance test procedures to confirm platform readiness.
 </li>
 <li>
 
 Test Planning and Execution:
 
 Translate trial objectives into executable test procedures and scenarios. Define success criteria, instrumentation plans, and safety boundaries. Direct day-to-day test operations in the field and make real-time decisions on scenario modifications within the approved envelope.
 </li>
 <li>
 
 Technical Documentation:
 
 Create and maintain user manuals, operator training materials, troubleshooting guides, commissioning checklists, and integration procedures. Compile mission metrics and contribute to Operational Insight Briefs and commercial handover documentation.
 </li>
 <li>
 
 Field Preparation and Troubleshooting:
 
 Execute field deployment checklists alongside the UGV / C2 Operator. Troubleshoot hardware and software issues, perform field-level maintenance, and escalate technical problems to the engineering team.
 </li>
 <li>
 
 Vehicle Operation (Cross-Training):
 
 Maintain proficiency in operating UGVs through the C2/FMS interface and remote control, including real-time monitoring, telemetry oversight, and emergency intervention procedures.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 Qualifications
 
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s or Master&rsquo;s degree in Robotics, Mechatronics, Electrical Engineering, Systems Engineering, Computer Engineering, or related field.
 </li>
 <li>
 2+ years of experience in systems integration, test and evaluation, commissioning, or technical operations in defence, aerospace, robotics, or autonomous systems.
 </li>
 <li>
 Familiarity with autonomous vehicle systems, sensor suites (cameras, GNSS, IMU, lidar/radar), and communication systems.
 </li>
 <li>
 Comfortable working in outdoor field environments in various weather conditions.
 </li>
 <li>
 Methodical approach to checklists, procedures, and safety protocols.
 </li>
 <li>
 Proficiency in software integration workflows: flashing firmware, deploying configuration packages, running integration and regression tests. Hands-on experience operating unmanned ground vehicles, robotic systems, or remote-controlled platforms.
 </li>
 <li>
 Experience with structured test methodologies and evaluation frameworks (e.g., DT&amp;E, OT&amp;E). Familiarity with commissioning and acceptance testing procedures.
 </li>
 <li>
 Strong technical writing skills: proven ability to produce user manuals, training materials, troubleshooting guides, and test reports.
 </li>
 <li>
 Valid driver&rsquo;s license.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 What we offer
 
 
 
 
 
 
 We offer a competitive salary, a comprehensive benefits package, and the opportunity to work alongside some of the brightest minds in the Autonomous Robotics industry. Our work culture is collaborative and inclusive, with a strong focus on innovation and personal growth.
 
 
 If you're passionate about advancing the frontiers of Autonomous Robotics and eager to leave a lasting mark in this domain, seize the opportunity and apply today to join us in sculpting the future of this dynamic field!
 
</div>

Integration and Test Engineer, SteerAI

Akima

<div>Company Overview:
<div></div><div>
Work Where it Matters</div><div></div><div> 
Pinnacle Solutions, an Akima company, is not just another federal contractor. As an Alaska Native Corporation (ANC), our mission and purpose extend beyond our exciting federal projects as we support our shareholder communities in Alaska.</div><div></div><div> 
At Pinnacle Solutions, the work you do every day makes a difference in the lives of our 15,000 I&ntilde;upiat shareholders, a group of Alaska natives from one of the most remote and harshest environments in the United States.</div><div></div><div> 
For our shareholders, Pinnacle Solutions provides support and employment opportunities and contributes to the survival of a culture that has thrived above the Arctic Circle for more than 10,000 years.</div><div></div><div> 
For our government customers, Pinnacle Solutions delivers comprehensive services for general construction and renovation, as well as civil and marine construction.</div><div></div><div> 
As a Pinnacle Solutions employee, you will be surrounded by a challenging, yet supportive work environment that is committed to innovation and diversity, two of our most important values. You will also have access to our comprehensive benefits and competitive pay in addition to growth opportunities and excellent retirement options.</div>
Description:
<div>
Pinnacle Solutions is looking for a CH-47 Flight Engineer/Mechaic to work in Tabuk, SA. The CH-47F FE is responsible for monitoring the aircraft systems, diagnosing and eliminating any problems that may arise, and ensuring that all maintenance faults have been recorded and properly corrected in accordance with service guidance. These duties will be performed day and night as well as under VMC and IMC The CH-47F will also perform aircraft maintenance, repairs, modifications, and inspections in accordance with approved methods and practices per specific Technical Manuals, Operator Manual, Maintenance Test Flight Checklist, and any other directives pertinent to the environment. The CH-47F FE will also provide technical direction and training to the Royal Saudi Land Forces Aviation Command when needed. To join our team of outstanding professionals, apply today!</div>
Responsibilities:
<ul><li>Performs flight crew work supporting heavy multi-engine aircraft and providing assistance to the pilot in the overall operation of the aircraft.</li><li><div>
Conducts APU operations, perform crew duties during a maintenance test flight (MTFs), and maintenance operational checks (MOCs).</div></li><li><div>
Performs CH-47F maintenance tasks and duties as required using Technical Manuals, Operator Manuals, Maintenance Test Flight Manual, Check List Manual, and any other directives pertinent to the environment.</div></li><li><div>
Removes, inspects, troubleshoots, and installs aircraft system and subsystem components and subcomponents to include, but not limited to, engines, rotors, gearboxes, transmissions, flight controls, and hydraulics.</div></li><li><div>
Performs scheduled/unscheduled maintenance activities to include PMS, servicing and lubrication, and MOC/MTF support functions.</div></li><li><div>
Uses and performs operator maintenance on tools, special tools/test equipment, and Aircraft Ground Support Equipment (AGSE) and Peculiar Ground Support Equipment (PGSE).</div></li><li><div>
Prepares, reviews, and updates aircraft maintenance forms and records.</div></li><li><div>
Uses common measuring tools, measuring gauges, and alignment fixtures.</div></li><li><div>
Provides On-the-Job Training (OJT), coaching, and mentoring to Royal Saudi Land Forces Aviation Command (RSLAC) personnel in all aspects of aircraft maintenance activities.</div></li><li><div>
Ensures that all related maintenance operations are conducted in a safe manner.</div></li><li><div>
Other tasks as directed by the PC Manager and Maintenance Lead.</div></li></ul>
Qualifications:
<ul><li>Eight (8) years' experience as an aircraft mechanic on CH-47F series aircraft.</li><li><div>
Successfully completed and be qualified by the appropriate U.S. Government armed forces CH-47 aircraft mechanic maintenance course or civilian equivalent training.</div></li><li><div>
Proficient in the use of computer-hosted interactive technical manuals, aircraft maintenance forms or similar aviation maintenance management system, and other aircraft-related documentation.</div></li><li><div>
Professional verbal, written, and interpersonal communication skills.</div></li><li><div>
Ability to effectively communicate with the customer in a professional and courteous manner.</div></li><li><div>
Possess a valid state or Government issued driver&rsquo;s license.</div></li><li><div>
Successfully pass an overseas deployment physical upon hire.</div></li><li><div>
US Citizenship required.</div></li><li><div>
HS diploma required.</div></li></ul><div>
Desired Qualifications:</div><ul><li>
Military FE school trained.</li></ul>
Job ID: 2026-22733 Work Type: On-Site</div>

CH-47 Flight Engineer/Mechanic

Millcreek Township

Now Establishing Our Next Full-Time Firefighter Hiring ListMillcreek Township Fire Department has proudly protected our community, delivering professional, responsive service through a dedicated team of career staff, part-time employees, and exceptional volunteers.We are currently establishing a full-time hiring eligibility list to support anticipated staffing needs over the next year. This process is intended to identify highly qualified candidates committed to serving our community at the highest level.Please note that this application process is for full-time employment consideration only. Applications for part-time positions are accepted on an ongoing basis outside of this hiring cycle.Minimum Qualifications &ndash; Full-Time Applicants for full-time positions must possess the following:<ul><li>Firefighter II Certification (or Firefighter I with the ability to obtain Firefighter II within 3 years)</li><li>Paramedic Certification (or EMT with ability to obtain Paramedic within 3 years)</li><li>Valid Driver&rsquo;s License with an acceptable driving record</li><li>Hazardous Materials Operations Certification</li><li>NIMS 100, 200, 700, and 800 Certifications</li><li>High School Diploma or GED</li><li>Healthcare Provider CPR Certification</li><li>Emergency Vehicle Operator Course (EVOC) Completion</li></ul>Preferred QualificationsCandidates with the following credentials will be given additional consideration:<ul><li>Three or more years of firefighting experience</li><li>Fire Service Instructor I and II Certification</li><li>Driver/Operator &ndash; Pumper Certification</li><li>Driver/Operator &ndash; Aerial Certification</li><li>Basic Vehicle Rescue Certification</li></ul>Application Deadline and SubmissionAll applications must be received no later than May 22, 2026. Late or incomplete applications will not be considered.Submit the following documents with your application packet:<ul><li>Completed application</li><li>Resume</li><li>Cover letter describing your qualifications</li><li>Copies of required certifications</li><li>Copy of your driver&rsquo;s license</li><li>(Optional) DD-214 for veterans&rsquo; preference (20% added to passing written exam score)</li></ul>Submit your application package by mail, email, or hand delivered. Hand-delivered applications must be in a sealed envelope clearly marked: &ldquo;Firefighter Application.&rdquo; Download the application packet by clicking this link, Now Establishing Our Next Full-Time Firefighter Hiring ListMillcreek Township Fire Department has proudly protected our community, delivering professional, responsive service through a dedicated team of career staff, part-time employees, and exceptional volunteers.We are currently establishing a full-time hiring eligibility list to support anticipated staffing needs over the next year. This process is intended to identify highly qualified candidates committed to serving our community at the highest level.Please note that this application process is for full-time employment consideration only. Applications for part-time positions are accepted on an ongoing basis outside of this hiring cycle.Minimum Qualifications &ndash; Full-Time Applicants for full-time positions must possess the following:<ul><li>Firefighter II Certification (or Firefighter I with the ability to obtain Firefighter II within 3 years)</li><li>Paramedic Certification (or EMT with ability to obtain Paramedic within 3 years)</li><li>Valid Driver&rsquo;s License with an acceptable driving record</li><li>Hazardous Materials Operations Certification</li><li>NIMS 100, 200, 700, and 800 Certifications</li><li>High School Diploma or GED</li><li>Healthcare Provider CPR Certification</li><li>Emergency Vehicle Operator Course (EVOC) Completion</li></ul>Preferred QualificationsCandidates with the following credentials will be given additional consideration:<ul><li>Three or more years of firefighting experience</li><li>Fire Service Instructor I and II Certification</li><li>Driver/Operator &ndash; Pumper Certification</li><li>Driver/Operator &ndash; Aerial Certification</li><li>Basic Vehicle Rescue Certification</li></ul>Application Deadline and SubmissionAll applications must be received no later than May 22, 2026. Late or incomplete applications will not be considered.Submit the following documents with your application packet:<ul><li>Completed application</li><li>Resume</li><li>Cover letter describing your qualifications</li><li>Copies of required certifications</li><li>Copy of your driver&rsquo;s license</li><li>(Optional) DD-214 for veterans&rsquo; preference (20% added to passing written exam score)</li></ul>Submit your application package by mail, email, or hand delivered. Hand-delivered applications must be in a sealed envelope clearly marked: &ldquo;Firefighter Application.&rdquo; Download the application packet by visiting https://www.millcreektownship.com/DocumentCenter/View/4488/Firefighter-Application-Packet-04-09-2026.Mailing Address: Millcreek Township Administrative Office 3608 West 26 Street Erie, PA 16506Email: hr@millcreektownship.comWritten ExaminationThe written examination will be administered in person on May 30, 2026, at 9:00 a.m. at the West Ridge South Station, located at 4775 Sterrettania Rd, Erie, PA 16506.A non-refundable examination fee of $65.00 is required and must be submitted at the time of testing. Payment must be made by cashier&rsquo;s check or money order only. Candidates must also present a valid driver&rsquo;s license at the time of the examination.Failure to attend the written examination at the scheduled date and time will result in removal from further consideration in the hiring process. Candidates who do not meet the minimum qualifications will not advance.Examination Preference PointsCandidates who achieve a passing score on the written examination may be eligible for additional preference points, which will be applied to their final score. Documentation verifying eligibility must be submitted.Preference points are awarded as follows:<ul><li>Veteran Status: 20%</li><li>Paramedic Certification: 5%</li><li>Firefighter II Certification: 2%</li><li>Resident of Erie County: 1%</li><li>Current part-time Millcreek firefighter in good standing: 0.5% for every six months of continuous service determined by payroll start date (up to a maximum of 5%)</li></ul>All preference points will be applied to a candidate&rsquo;s passing written examination score to determine final ranking on the eligibility list.Physical Agility TestA selection of qualified individuals that successfully complete the written examination will be invited to a Physical Agility test being held on Saturday, June 27, 2026. Further details, including location and specific testing time slot, will be included with your invitation.A practice physical agility test will be offered on Saturday, June 20, 2026 at 9:00 a.m. at West Ridge South Station, for candidates interested in familiarizing themselves with the assessment.A full description of the test requirements is included in this packet.In-Person InterviewsA limited number of top candidates will be invited to an in-person interview. This is an opportunity to further discuss your qualifications and learn more about our team.Pre-Employment ScreeningsCandidates receiving a conditional offer of employment must successfully complete:<ul><li>Medical Screening</li><li>Drug Testing</li><li>Polygraph Examination</li><li>Psychological Evaluation</li><li>Motor Vehicle Record Check</li><li>Criminal Background Check</li></ul>Need Assistance?Please contact:Diane Lyons Human Resources, Millcreek Township Phone: (814) 833-1111 x322 Email: hr@millcreektownship.comMailing Address: Millcreek Township Administrative Office 3608 West 26 Street Erie, PA 16506Email: hr@millcreektownship.comWritten ExaminationThe written examination will be administered in person on May 30, 2026, at 9:00 a.m. at the West Ridge South Station, located at 4775 Sterrettania Rd, Erie, PA 16506.A non-refundable examination fee of $65.00 is required and must be submitted at the time of testing. Payment must be made by cashier&rsquo;s check or money order only. Candidates must also present a valid driver&rsquo;s license at the time of the examination.Failure to attend the written examination at the scheduled date and time will result in removal from further consideration in the hiring process. Candidates who do not meet the minimum qualifications will not advance.Examination Preference PointsCandidates who achieve a passing score on the written examination may be eligible for additional preference points, which will be applied to their final score. Documentation verifying eligibility must be submitted.Preference points are awarded as follows:<ul><li>Veteran Status: 20%</li><li>Paramedic Certification: 5%</li><li>Firefighter II Certification: 2%</li><li>Resident of Erie County: 1%</li><li>Current part-time Millcreek firefighter in good standing: 0.5% for every six months of continuous service determined by payroll start date (up to a maximum of 5%)</li></ul>All preference points will be applied to a candidate&rsquo;s passing written examination score to determine final ranking on the eligibility list.Physical Agility TestA selection of qualified individuals that successfully complete the written examination will be invited to a Physical Agility test being held on Saturday, June 27, 2026. Further details, including location and specific testing time slot, will be included with your invitation.A practice physical agility test will be offered on Saturday, June 20, 2026 at 9:00 a.m. at West Ridge South Station, for candidates interested in familiarizing themselves with the assessment.A full description of the test requirements is included in this packet.In-Person InterviewsA limited number of top candidates will be invited to an in-person interview. This is an opportunity to further discuss your qualifications and learn more about our team.Pre-Employment ScreeningsCandidates receiving a conditional offer of employment must successfully complete:<ul><li>Medical Screening</li><li>Drug Testing</li><li>Polygraph Examination</li><li>Psychological Evaluation</li><li>Motor Vehicle Record Check</li><li>Criminal Background Check</li></ul>Need Assistance?Please contact:Diane Lyons Human Resources, Millcreek Township Phone: (814) 833-1111 x322 Email: hr@millcreektownship.comPay: From $25.03 per hourBenefits:<ul><li>457(b)</li><li>Dental insurance</li><li>Dependent health insurance coverage</li><li>Flexible spending account</li><li>Health insurance</li><li>Life insurance</li><li>Paid time off</li><li>Retirement plan</li><li>Vision insurance</li></ul>Work Location: In person

Millcreek Fire Department is Establishing Our Next Full Time Hiring List

Marafiq

<div>
 
 
 Operator, Electrical Shift (PG)
 
 
 
 
 
 
 
 
 
 
 Job Purpose
 
 
 
 
 
 
 To safely execute, coordinate, and document all electrical switching, isolation, and energization activities within the STG plant, ensuring reliable power generation, protection of personnel and equipment, and full compliance with electrical safety standards and operational procedures.
 
 
 
 
 
 
 Responsibility
 
 
 
 
 <ol>
 <li>
 Compliance with Safe electrical isolations and switching operations.
 </li>
 <li>
 Provides dedicated supervision &amp; monitoring of all plant electrical systems and substations (MV/LV, UPS, DC, etc.).
 </li>
 <li>
 Build an electrical operations skillset in the shift team, aligned with safety audit and regulations.
 </li>
 <li>
 Perform authorized switching operations on LV/MV/HV equipment (breakers, isolators, transformers, busbars, feeders).
 </li>
 <li>
 Execute planned and unplanned isolations for maintenance, ensuring correct tagging, grounding, and safety barriers.
 </li>
 <li>
 Restore equipment to service following approved procedures and after verifying safe conditions.
 </li>
 <li>
 Coordinate switching sequences with the control room, STG operators, and operation supervisors.
 </li>
 <li>
 Enforce electrical safety rules, isolation and permit‑to‑work procedures.
 </li>
 <li>
 Identify abnormal conditions such as overheating, partial discharge, breaker mis‑operations, or protection trips.
 </li>
 <li>
 Communicate switching plans, risks, and system status to the control room and field teams.
 </li>
 <li>
 Provide clear handover notes and maintain accurate switching logs.
 </li>
 <li>
 Review the shift activities handover with outgoing shift operator; coordinate with control room operator and shift supervisor to progress unfinished work from previous shift to completion.
 </li>
 <li>
 Follow all relevant safety, quality and environmental control procedures and instructions so that personal safety of others is not jeopardized, and a minimum level of product/service and environmental impact can be guaranteed.
 </li>
 <li>
 Check and record readings, alarms, electrical parameters etc. on STG plant and related auxiliaries and report abnormalities or deviations to Control Room operator and shift supervisor for advice and further action.
 </li>
 <li>
 Conduct normalization of equipment on completion of maintenance work as per isolation certificate, test run equipment if required, confirm good housekeeping to ensure equipment operates safely.
 </li>
 <li>
 Follow Standard Operating Procedure and Work Instruction and keep as a reference to ensure work has been performed as per standard.
 </li>
 <li>
 Perform regular routine work (daily, weekly and monthly etc.), report abnormalities, and maintain a record as well as plant housekeeping
 </li>
 <li>
 Ensure compliance with regulations, standards and procedures, provide feedback and recommendations for improvement where necessary.
 </li>
 <li>
 Participate and provide support to train new Field operator, ensure knowledge and experience transfer to maintain high level of capability.
 </li>
 </ol>
 
 
 
 
 
 Position Requirements
 
 
 
 
 
 
 Minimum Education Requirements
 
 <ul>
 <li>
 Diploma in Electrical, Power Systems, or Industrial Electricity, Or
 </li>
 <li>
 Technical Diploma from a recognized institute
 </li>
 </ul>
 
 
 
 
 Minimum Experience Requirements
 
 <ul>
 <li>
 3&ndash;5 years of experience in electrical operations within power plants, substations, or industrial utilities 4 years&rsquo; relevant plant operational experience in a large industrial environment.
 </li>
 <li>
 Hands‑on experience with MV/HV switching and electrical safety procedures.
 </li>
 <li>
 Familiarity with STG systems, generators, excitation systems, and auxiliary electrical equipment.
 </li>
 </ul>
</div>

Operator, Electrical Shift (PG)

Crash Champions Collision Repair Team

<div><div>As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert. For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People.</div><div> 
A mechanic is responsible for inspecting and repairing vehicles. These professionals oversee mechanical inspections, assemble mechanical components, and perform repairs.</div><div></div><h1 class="jobSectionHeader"> 
Core Responsibilities:
</h1><h1 class="jobSectionHeader">
</h1><ul><li>Examines vehicles to determine extent of damage or malfunctions.</li><li>
Test drive vehicles, test components and systems using equipment such as computerized diagnostic devices.</li><li>
May repair, reline, replace, and adjust brake systems and perform vehicle alignments.</li><li>
Test and adjust repaired systems to meet manufacturers' performance specifications.</li><li>
Repair and/or replace engine components, brake systems, steering and air bag systems.</li><li>
Perform other related duties as assigned to ensure an efficient and effective repair.</li></ul><h1 class="jobSectionHeader"> 
</h1><ul><li>
ASE certification.</li><li>
Must be able to pass thorough background check.</li><li>
Must have valid driver&rsquo;s license.</li><li>
Must be able to lift up to 50 pounds</li></ul></div>

Automotive Mechanic

Search 6555+ Test operator jobs near you this May. New roles added regularly across leading industries. Apply today.