thermal technician

Vertiv

<p></p><div><div><div><div><div><div><div><div><div><div><div><p><b>POSITION SUMMARY
</b></p><p>A Cooling CE is responsible for installation, commissioning, scheduled and emergency service on Liebert Air products. The Cooling CE is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Cooling CE is also required to maintain continuous communication with Area/District Offices, and direct manager.<br>
</p><p></p><p><b>RESPONSIBILITIES
</b></p><p><b>ROLE
</b></p><ul><li>Rely on direction to accomplish goals
</li><li>Perform a number of work-related tasks
</li><li>Capable of working under direct supervision or independently based upon training
</li><li>Maintain certifications per Job requirements
</li></ul><p><b>TECHNICAL
</b></p><ul><li>Render on site and phone assistance to customers.
</li><li>Communicate with National Technical Support on equipment issues
</li><li>Perform work related tasks according to company guidelines for scheduled maintenance
</li><li>Implement Field Change Notices according to published guidelines
</li><li>Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips
</li></ul><p><b>SAFETY
</b></p><ul><li>Operate in a safe manner in accordance with published safety guidelines
</li><li>Must wear appropriate PPE as per company guidelines and accordance with job duties
</li><li>Adhere to work hours policy guidelines &ndash; &ldquo;14 hours rule&rdquo;
</li><li>Report all work related accidents or injuries within 24 hours to the appropriate personnel.
</li></ul><p><b>ADMINISTRATION
</b></p><ul><li>Provide accurate and timely reporting according to company guidelines
</li><li>Timecards, expense reports, mileage reports, ticket closure, forms et al.
</li><li>Maintain individual inventory in accordance with company policy
</li><li>Maintain company property according to company policies
</li><li>Vehicle, credit cards, PPE, test equipment, laptop, pager, et al.
</li></ul><p><b>CUSTOMER SATISFACTION
</b></p><ul><li>Provide proper and adequate communication to internal and external customers
</li><li>Provide estimated time of arrival to the customer for where applicable
</li><li>Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each designated assignment
</li><li>Strive to provide all customers a &ldquo;first time fix&rdquo; for their equipment
</li><li>Maintain customer satisfaction rates according to company guidelines
</li><li>Attend Customer Meetings as required
</li></ul><p><b>PERFORMANCE
</b></p><ul><li>Maximize productivity by combining service opportunities
</li><li>Complete all work in an efficient and timely manner
</li><li>Capable of making technical and commercial decisions under pressure
</li><li>Properly evaluate site and equipment for appropriate billing status
</li><li>Maintain productive utilization rate according to company guidelines
</li><li>Perform inventory cycle counts according to company guidelines
</li><li>Adhere to company dress code and safety regulations
</li><li>Meet or exceed on-site response time requirements for each customer
</li><li>Understand and comply with company startup/escalation processes and procedures
</li><li>Maintain proper and adequate level of internal communications
</li><li>Managers, co-workers, Support Services, electronic communications, et al.
</li><li>Perform several work-related tasks
</li><li>Capable of working under direct supervision or independently based upon training
</li>Maintain certifications per Job requirements<br>
<li>
</li></ul><p></p><p><b>QUALIFICATIONS
</b></p><ul><li>Required experience (one or more of the following)
</li><li>High School Diploma or G.E.D. equivalent
</li><li>HVAC &ndash; Certificate Program degree or equivalent experience in the field.
</li><li>Six years military experience in a related field
</li><li>Equivalent industry experience with EPA refrigerant license
</li><li>Basic electrical knowledge
</li><li>Interpersonal Skills
</li><li>Professional
</li><li>Reliable
</li><li>Team Player
</li><li>Familiarity with electrical / electronic test equipment and fundamentals
</li><li>Must be able to read and interpret electrical line diagrams and blueprints
</li><li>Working knowledge of OHM&rsquo;s law and HVAC theory
</li><li>Technical skills
</li><li>Ability to make basic site evaluation skills to include: environmental temperature, and general operating conditions
</li><li>Elementary fix/repair techniques based on directed supervision
</li><li>Capable of completing tasks and return unit to full operating conditions based upon directed supervision
</li><li>Ability to summarize and report all work related tasks performed
</li><li>Strong skill sets:
</li><li>Communication skills
</li><li>Customer service skills
</li><li>Troubleshooting skills
</li><li>Safety procedures
</li><li>Organizational and planning skills
</li><li>Computer skills
</li>Mechanical aptitude<br>
<li>
</li></ul><p></p><p><b>PHYSICAL &amp; ENVIRONMENTAL DEMANDS
</b></p><ul><li>While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Frequent driving (car, van, truck). Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds
</li><li>Extreme cold (below 32*)
</li><li>Extreme heat (above 100*)
</li><li>Noise Level (Medium / High need to shout to be heard)
</li><li>Working around moving machinery (fork-lifts, tractors)
</li><li>Protective Equipment Required (earplugs, gloves, eyewear, respirator, mask, etc.)
</li><li>Work outdoors (no effective protection from weather)
</li><li>Travel is required
</li><li>Flexible schedules (weekends, evenings, and holidays)
</li><li>May have on-call responsibility
</li><li>Valid driver&rsquo;s license
</li>Must be at least 18 years old<br>
<li>
</li></ul><p></p><p>Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship.<br>
</p><p></p><p><b>WORKING CONDITIONS:
</b></p><ul><li>Travel is required
</li><li>Flexible schedules (weekends, evenings, and holidays)
</li><li>May have on-call responsibility
</li><li>Valid driver&rsquo;s license
</li><li>Must be at least 18 years old</li></ul></div></div></div></div></div></div></div></div></div></div></div>

Cooling Customer Engineer-Data Center Thermal Technician

<p></p><div><div><div><div><div><div><div><div><div><div><div><p><b>POSITION SUMMARY
</b></p><p>A Cooling CE is responsible for installation, commissioning, scheduled and emergency service on Liebert Air products. The Cooling CE is required to establish, promote and maintain excellent rapport with all customers, co-workers, sales representatives and others as appropriate. The Cooling CE is also required to maintain continuous communication with Area/District Offices, and direct manager.<br>
</p><p></p><p><b>RESPONSIBILITIES
</b></p><p><b>ROLE
</b></p><ul><li>Rely on direction to accomplish goals
</li><li>Perform a number of work-related tasks
</li><li>Capable of working under direct supervision or independently based upon training
</li><li>Maintain certifications per Job requirements
</li></ul><p><b>TECHNICAL
</b></p><ul><li>Render on site and phone assistance to customers.
</li><li>Communicate with National Technical Support on equipment issues
</li><li>Perform work related tasks according to company guidelines for scheduled maintenance
</li><li>Implement Field Change Notices according to published guidelines
</li><li>Keep current on Safety Bulletins, Safety Field Change Notices, Field Change Notices, and Service Tips
</li></ul><p><b>SAFETY
</b></p><ul><li>Operate in a safe manner in accordance with published safety guidelines
</li><li>Must wear appropriate PPE as per company guidelines and accordance with job duties
</li><li>Adhere to work hours policy guidelines &ndash; &ldquo;14 hours rule&rdquo;
</li><li>Report all work related accidents or injuries within 24 hours to the appropriate personnel.
</li></ul><p><b>ADMINISTRATION
</b></p><ul><li>Provide accurate and timely reporting according to company guidelines
</li><li>Timecards, expense reports, mileage reports, ticket closure, forms et al.
</li><li>Maintain individual inventory in accordance with company policy
</li><li>Maintain company property according to company policies
</li><li>Vehicle, credit cards, PPE, test equipment, laptop, pager, et al.
</li></ul><p><b>CUSTOMER SATISFACTION
</b></p><ul><li>Provide proper and adequate communication to internal and external customers
</li><li>Provide estimated time of arrival to the customer for where applicable
</li><li>Complete scheduled maintenance documentation properly and provide to the customer and local office upon completion of each designated assignment
</li><li>Strive to provide all customers a &ldquo;first time fix&rdquo; for their equipment
</li><li>Maintain customer satisfaction rates according to company guidelines
</li><li>Attend Customer Meetings as required
</li></ul><p><b>PERFORMANCE
</b></p><ul><li>Maximize productivity by combining service opportunities
</li><li>Complete all work in an efficient and timely manner
</li><li>Capable of making technical and commercial decisions under pressure
</li><li>Properly evaluate site and equipment for appropriate billing status
</li><li>Maintain productive utilization rate according to company guidelines
</li><li>Perform inventory cycle counts according to company guidelines
</li><li>Adhere to company dress code and safety regulations
</li><li>Meet or exceed on-site response time requirements for each customer
</li><li>Understand and comply with company startup/escalation processes and procedures
</li><li>Maintain proper and adequate level of internal communications
</li><li>Managers, co-workers, Support Services, electronic communications, et al.
</li><li>Perform several work-related tasks
</li><li>Capable of working under direct supervision or independently based upon training
</li>Maintain certifications per Job requirements<br>
<li>
</li></ul><p></p><p><b>QUALIFICATIONS
</b></p><ul><li>Required experience (one or more of the following)
</li><li>High School Diploma or G.E.D. equivalent
</li><li>HVAC &ndash; Certificate Program degree or equivalent experience in the field.
</li><li>Six years military experience in a related field
</li><li>Equivalent industry experience with EPA refrigerant license
</li><li>Basic electrical knowledge
</li><li>Interpersonal Skills
</li><li>Professional
</li><li>Reliable
</li><li>Team Player
</li><li>Familiarity with electrical / electronic test equipment and fundamentals
</li><li>Must be able to read and interpret electrical line diagrams and blueprints
</li><li>Working knowledge of OHM&rsquo;s law and HVAC theory
</li><li>Technical skills
</li><li>Ability to make basic site evaluation skills to include: environmental temperature, and general operating conditions
</li><li>Elementary fix/repair techniques based on directed supervision
</li><li>Capable of completing tasks and return unit to full operating conditions based upon directed supervision
</li><li>Ability to summarize and report all work related tasks performed
</li><li>Strong skill sets:
</li><li>Communication skills
</li><li>Customer service skills
</li><li>Troubleshooting skills
</li><li>Safety procedures
</li><li>Organizational and planning skills
</li><li>Computer skills
</li>Mechanical aptitude<br>
<li>
</li></ul><p></p><p><b>PHYSICAL &amp; ENVIRONMENTAL DEMANDS
</b></p><ul><li>While performing duties of the above jobs, the associate is regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or other components; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear and smell. The associate frequently is required to sit and climb or balance. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Frequent driving (car, van, truck). Must be able to consistently lift up to 50 pounds and occasionally up to 75 pounds
</li><li>Extreme cold (below 32*)
</li><li>Extreme heat (above 100*)
</li><li>Noise Level (Medium / High need to shout to be heard)
</li><li>Working around moving machinery (fork-lifts, tractors)
</li><li>Protective Equipment Required (earplugs, gloves, eyewear, respirator, mask, etc.)
</li><li>Work outdoors (no effective protection from weather)
</li><li>Travel is required
</li><li>Flexible schedules (weekends, evenings, and holidays)
</li><li>May have on-call responsibility
</li><li>Valid driver&rsquo;s license
</li>Must be at least 18 years old<br>
<li>
</li></ul><p></p><p>Notes: Vertiv will make reasonable accommodations whenever necessary for all qualified employees or candidates with disabilities (as defined by applicable law), provided that (1) the individual is otherwise qualified to safely perform the essential functions of the job and (2) such accommodations due not impose an undue hardship.<br>
</p><p></p><p><b>WORKING CONDITIONS:
</b></p><ul><li>Travel is required
</li><li>Flexible schedules (weekends, evenings, and holidays)
</li><li>May have on-call responsibility
</li><li>Valid driver&rsquo;s license
</li><li>Must be at least 18 years old
</li></ul><p><i>The anticipated salary range for this role in the Seattle locality is between $65,000 to $75,000 per year: geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to receive and/or participate in profit sharing, allowances, travel and/or car expenses, and earn sales incentives based on revenue or utilization depending on the terms of the employee&rsquo;s role and individual offer details. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay (9 days), and 401k. Additional details about total compensation and benefits will be provided during the hiring process.</i></p></div></div></div></div></div></div></div></div></div></div></div><p></p>

Thermicalenge LLC

<p><b>Thermal Engineer</b><br/><b>Thermicalenge LLC &ndash; Mesaieed, Doha, Qatar (Mesaieed Industrial City, Building 56)</b><br/><b>Salary:</b> QAR 33,000 per month</p><p><b>Position Overview:</b><br/>Thermicalenge LLC is looking for a highly capable Thermal Engineer to join its operations in Mesaieed. This role centers on the design, evaluation, and optimization of thermal systems used in industrial applications, ensuring performance efficiency and compliance with safety and environmental standards.</p><p><b>Primary Responsibilities:</b></p><ul><li>Design and analyze thermal systems including heat exchangers, HVAC systems, and energy processes</li><li>Perform thermal simulations and calculations to improve system efficiency</li><li>Monitor operational performance and recommend process enhancements</li><li>Ensure adherence to industry regulations, safety standards, and environmental guidelines</li><li>Troubleshoot thermal and energy-related issues in plant operations</li><li>Prepare technical reports, system documentation, and performance analyses</li><li>Work closely with multidisciplinary engineering and operations teams</li></ul><p><b>Required Qualifications:</b></p><ul><li>Bachelor&rsquo;s degree in Mechanical Engineering, Thermal Engineering, or a related field</li><li>Demonstrated experience in thermal system design or industrial process environments</li><li>Strong understanding of heat transfer, thermodynamics, and fluid mechanics</li><li>Proficiency in simulation tools such as ANSYS, MATLAB, or similar software</li><li>Excellent analytical, problem-solving, and technical communication skills</li><li>Ability to manage responsibilities in a fast-paced industrial setting</li></ul><p><b>What We Offer:</b></p><ul><li>Competitive monthly salary of QAR 33,000</li><li>Opportunity to work within Mesaieed, a key industrial hub</li><li>Career development and technical growth opportunities</li><li>Professional and collaborative work culture</li></ul><p><b>Application Process:</b><br/>Qualified candidates are encouraged to apply by submitting their CV and relevant documents to join Thermicalenge LLC.</p><p>الراتب المدفوع: QAR٠٫٠٠&nbsp;لكل شهر</p><p>موقع العمل: بشكل شخصي</p>

Thermal Engineer

<div><div><h2 class="jobSectionHeader"><b>Position Description:</b></h2>
<p>Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you!We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States.<br>
<br>
This position is located in Houston, TX.</p>
</div><div><h2 class="jobSectionHeader"><b>Your future duties and responsibilities:</b></h2>
<ul><li>Develop and maintain high-fidelity thermal models using tools such as Thermal Desktop and SINDA/FLUINT.</li><li>Perform steady-state and transient thermal analyses for spacecraft components and integrated systems.</li><li>Evaluate thermal performance under various mission phases, including launch, transit, lunar orbit, and quiescent modes.</li><li>Support thermal verification activities, including test planning, data analysis, and model correlation.</li><li>Collaborate with design teams to optimize thermal control strategies (e.g., insulation, heaters, radiators) and provide</li></ul>
guidance on thermal considerations.<br>
<ul><li>Participate in design reviews, technical interchange meetings, and anomaly investigations.</li><li>Document analysis results and present findings to internal stakeholders and NASA customers.</li><li>Reviewing and providing feedback on NASA and vendor thermal designs to ensure compliance with requirements and</li></ul>
best practices.
</div><div><h2 class="jobSectionHeader"><b>Required qualifications to be successful in this role:</b></h2>
<ul><li>Bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area</li><li>Experience with thermal analysis tools such as but not limited to Thermal Desktop, COMSOL, Ansys Fluent, or similar industry standard software.</li><li>Proven experience in thermal analysis and design for aerospace systems.</li><li>Excellent oral and written communication skills and the ability to coordinate support from a wide range of technical disciplines.</li><li>Strong capability to assess and validate thermal designs for technical accuracy and compliance.</li></ul>
<br>
Desired qualifications/non-essential skills required:<br>
<br>
<ul><li>BS degree in engineering from an accredited engineering school and a minimum of two (2) years of direct engineering experience.</li><li>Familiar with JSC organizations, processes, and procedures.</li><li>The ability to coordinate support from a wide range of technical disciplines.</li><li>Experience in the design, analysis, testing, certification, and operation of space PTCS systems and components, which may include but are not limited to multilayer insulation (MLI), thermal blankets, surface coatings, radiators, heat pipes, and other passive thermal hardware during pre-launch, flight, and post-landing phases.</li><li>Experience with Thermal Desktop is preferred.</li><li>Familiarity with the Engineering Life Cycle process.</li></ul><br>
CGI is required by law in some jurisdictions to include a reasonable estimate of the compensation range for this role. The determination of this range includes various factors not limited to skill set, level, experience, relevant training, and licensure and certifications. To support the ability to reward for merit-based performance, CGI typically does not hire individuals at or near the top of the range for their role. Compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range for this role in the U.S. is $79,600.00 - $156,700.00.<br>
<br>
CGI Federal's benefits are offered to eligible professionals on their first day of employment to include:
<br>
.Competitive compensation<br>
.Comprehensive insurance options<br>
.Matching contributions through the 401(k) plan and the share purchase plan<br>
.Paid time off for vacation, holidays, and sick time<br>
.Paid parental leave<br>
.Learning opportunities and tuition assistance<br>
.Wellness and Well-being programs<br>
<br>
#CGIFederalJob<br>
#LI-MB7<br>
#ClearanceJobs<br>
</div><div><h2 class="jobSectionHeader"><b>Skills:</b></h2>
<ul><li>Systems Engineering</li>
<li>Technical Analysis</li>
</ul></div><div><h2 class="jobSectionHeader"><b>What you can expect from us:</b></h2>
<p><b>Together, as owners, lets turn meaningful insights into action.</b><br>
<br>
Life at CGI is rooted in ownership, teamwork, respect and belonging. Here, youll reach your full potential because<br>
<br>
You are invited to be an owner from day 1 as we work together to bring our Dream to life. Thats why we call ourselves CGI Partners rather than employees. We benefit from our collective success and actively shape our companys strategy and direction.<br>
<br>
Your work creates value. Youll develop innovative solutions and build relationships with teammates and clients while accessing global capabilities to scale your ideas, embrace new opportunities, and benefit from expansive industry and technology expertise.<br>
<br>
Youll shape your career by joining a company built to grow and last. Youll be supported by leaders who care about your health and well-being and provide you with opportunities to deepen your skills and broaden your horizons.
<br>
<br>
Come join our teamone of the largest IT and business consulting services firms in the world.<br>
<br>
Qualified applicants will receive consideration for employment without regard to their race, ethnicity, ancestry, color, sex, religion, creed, age, national origin, citizenship status, disability, pregnancy, medical condition, military and veteran status, marital status, sexual orientation or perceived sexual orientation, gender, gender identity, and gender expression, familial status or responsibilities, reproductive health decisions, political affiliation, genetic information, height, weight, or any other legally protected status or characteristics to the extent required by applicable federal, state, and/or local laws where we do business.<br>
<br>
CGI provides reasonable accommodations to qualified individuals with disabilities. If you need an accommodation to apply for a job in the U.S., please email the CGI U.S. Employment Compliance mailbox at US_Employment_Compliance@cgi.com. You will need to reference the Position ID of the position in which you are interested. Your message will be routed to the appropriate recruiter who will assist you. <b>Please note, this email address is only to be used for those individuals who need an accommodation to apply for a job. Emails for any other reason or those that do not include a Position ID will not be returned.</b><br>
<br>
We make it easy to translate military experience and skills! to be directed to our site that is dedicated to veterans and transitioning service members.<br>
<br>
All CGI offers of employment in the U.S. are contingent upon the ability to successfully complete a background investigation. Background investigation components can vary dependent upon specific assignment and/or level of US government security clearance held. Dependent upon role and/or federal government security clearance requirements, and in accordance with applicable laws, some background investigations may include a credit check. CGI will consider for employment qualified applicants with arrests and conviction records in accordance with all local regulations and ordinances.<br>
<br>
CGI will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with CGIs legal duty to furnish information.</p></div></div>

Passive Thermal Control System (PTCS) Thermal Analysis Engineer (ADV000CIN)

BCI Thermal & Industrial Isolation LLC

<p><b>Industrial Insulation Technician </b></p><p><b>Join a Growing Industrial Insulation Team in Oman!</b></p><p>BCI Thermal &amp; Industrial Isolation LLC is expanding its operations in Muscat and is seeking skilled and motivated <b>Industrial Insulation Technicians</b> to join our growing team.</p><p>If you have experience in <b>thermal insulation, pipe insulation, HVAC insulation, or industrial mechanical works</b>, this is your opportunity to work on major projects in oil &amp; gas, construction, and industrial facilities across Oman.</p><p>We offer stable long-term employment, career growth opportunities, and a supportive team environment where your skills are valued.</p><p><b>Key Responsibilities</b></p><ul><li>Install, maintain, and repair thermal insulation on pipes, tanks, and industrial equipment</li><li>Apply insulation materials such as fiberglass, mineral wool, foam, and cladding systems</li><li>Read and interpret technical drawings and insulation specifications</li><li>Ensure compliance with safety standards (HSE regulations)</li><li>Measure, cut, and fit insulation materials accurately</li><li>Support mechanical and maintenance teams on-site</li><li>Perform insulation removal and replacement when required</li><li>Maintain tools, equipment, and work area cleanliness</li></ul><p><b>Requirements</b></p><ul><li>Previous experience in <b>industrial insulation or construction work preferred</b></li><li>Knowledge of insulation materials and installation methods</li><li>Ability to work in industrial or outdoor environments</li><li>Basic understanding of safety procedures (HSE awareness)</li><li>Physically fit and able to perform manual work</li><li>Team player with a positive attitude</li><li>Oil &amp; gas or construction site experience is an advantage</li></ul><p><b>Why Work With Us?</b></p><p>At BCI Thermal &amp; Industrial Isolation LLC, we value skill, dedication, and growth. We provide a stable working environment with opportunities to build a long-term career in the industrial sector.</p><p>You will be part of projects that contribute to <b>energy efficiency, industrial safety, and major infrastructure development in Oman</b>.</p><p><b>Apply Now</b></p><p>If you are ready to build your career in industrial insulation, we encourage you to apply today.<br/>Qualified candidates will be contacted for immediate consideration.</p><p>Pay: RO250.000 - RO900.000 per month</p><p>Work Location: In person</p>

Industrial Insulation Technician

GE Vernova

<div><div><div>The Coating Technician supports thermal spray coating on gas turbine components, including pre/post-coating weighing and application. They ensure safe, accurate work while promoting Lean practices, maintaining 5S standards, and contributing to continuous improvement in safety, quality, and productivity.
<p></p><h1 class="jobSectionHeader"><b>Job Description</b></h1>
<p><b>Key Responsibilities</b></p>
<ul><li>Perform Coating Application in accordance with approved work instructions, process standards, and engineering requirements.</li>
<li>Perform Mask for Coating in accordance with approved work instructions and process specifications if required.</li>
<li>Read and interpret work instructions and quality forms to ensure accurate coating application.</li>
<li>Record and maintain accurate process and measurement data as required.</li>
<li>Use coating equipment, weighing devices, fixtures, and hand tools safely and effectively.</li>
<li>Inspect parts before and after coating processes to ensure conformance to quality requirements.</li>
<li>Maintain a clean, safe, and organized work area in accordance with <b>5S standards</b>.</li>
<li>Identify and communicate opportunities for <b>continuous improvement</b> in safety, quality, cycle time, flow, and waste reduction.</li>
<li>Contribute to team efforts that improve line performance, operational efficiency, and overall shop productivity.</li>
<li>Use shop floor systems and interfaces such as ELM and SmartShop, as required.</li>
<li>Comply with company quality policies, safety requirements, applicable procedures, and standard work.</li>
</ul><p><b>Required Qualifications</b></p>
<ul><li>Diploma, technical college degree, or equivalent hands-on experience.</li>
<li>Knowledge and experience in a technician, manufacturing, coating, or industrial role.
</li></ul><p><b>Desired characteristics
</b></p><ul><li>Min 2 years&rsquo; experience with Thermal Barrier Coating processes.</li>
<li>Participating in problem solving or process improvement activities.</li>
<li>Min 2 years&rsquo; experience working with gas turbine components or other precision aerospace/industrial parts.</li>
</ul><p></p><h1 class="jobSectionHeader"><b>Additional Information</b></h1>
<div><div><div><div><div><div><div><p><b>Relocation Assistance Provided: </b>No</p></div></div></div></div></div></div></div></div></div></div><p></p>

Coating Specialist

Growtech Industries

<div><p><b>Job Title</b><br>
 Senior Mechanical Engineer | CFD Engineer | Thermal Systems Engineer &ndash; BESS &amp; Modular Infrastructure</p><p><b>
Location</b><br>
 Phoenix, AZ or Buffalo, NY</p><p><b>
Department</b><br>
 Engineering</p><p><b>
Employment Type</b><br>
 Full-Time | Exempt</p><p><b>
Company Overview</b><br>
 GTI Energy, a division of GTI Fabrication, designs, engineers, and manufactures complex modular systems supporting battery energy storage systems (BESS), modular data center infrastructure, power generation platforms, and industrial energy systems. Our products integrate structural, mechanical, thermal, and electrical systems into highly engineered enclosures operating in demanding real-world environments.</p><p>
GTI operates in a fast-paced, engineered-to-order manufacturing environment where thermal performance, airflow management, manufacturability, and system reliability are critical to product success. Our engineering teams develop modular infrastructure products that must operate safely and efficiently under high thermal loads, constrained packaging conditions, and extreme ambient environments.</p><p><b>
Position Overview</b><br>
 GTI Energy is seeking a Senior Mechanical Engineer with deep Computational Fluid Dynamics (CFD) and thermal systems expertise to lead airflow, cooling, and thermal management design across modular energy and infrastructure products. This role will focus heavily on CFD-driven product development for enclosed systems including BESS platforms, modular data centers, power distribution equipment, and power generation systems.</p><p>
This is not a traditional HVAC or commercial building engineering role. GTI is specifically seeking engineers who have designed cooling systems for enclosed industrial equipment operating under real-world constraints including space limitations, airflow recirculation, heat rejection challenges, manufacturability, vibration, acoustics, and serviceability.</p><p>
The ideal candidate has experience modeling and optimizing thermal performance for battery systems, power electronics, generator enclosures, industrial skids, switchgear systems, or modular data center infrastructure where thermal performance directly impacts product reliability and operational uptime.</p><p><b>
Key Responsibilities</b></p><p><b><i>
CFD Modeling &amp; Thermal Analysis</i></b></p><div><ul><li>
Lead CFD analysis and thermal modeling activities for enclosed industrial systems and modular infrastructure products</li><li>
Develop airflow simulations for BESS enclosures, modular data centers, power electronics, electrical rooms, and integrated equipment platforms</li><li>
Analyze airflow distribution, pressure drop, temperature gradients, recirculation zones, hot spots, and thermal rejection performance</li><li>
Validate system performance under worst-case operating and ambient conditions</li><li>
Optimize thermal architectures to improve cooling efficiency, reliability, acoustics, and manufacturability</li></ul></div><p><b><i>
Cooling System Design &amp; Airflow Management</i></b></p><div><ul><li>
Design and integrate cooling systems based on actual equipment heat loads and operational requirements</li><li>
Develop enclosure airflow strategies including intake/exhaust placement, ducting, baffles, plenums, circulation paths, and pressure balancing</li><li>
Select and integrate off-the-shelf cooling equipment including HVAC units, heat exchangers, fans, chillers, and thermal management systems</li><li>
Design for real-world operating environments including dust, humidity, vibration, solar loading, and extreme ambient conditions</li><li>
Ensure designs meet thermal performance targets without excessive cost, noise, or packaging complexity</li></ul></div><p><b><i>
Mechanical System Design &amp; Product Development</i></b></p><div><ul><li>
Support mechanical packaging and enclosure design activities related to thermal system integration</li><li>
Coordinate thermal system layouts with structural, electrical, and manufacturing constraints</li><li>
Develop CAD models, engineering drawings, and BOMs supporting thermal and mechanical integration</li><li>
Ensure designs support manufacturability, serviceability, maintenance access, and production scalability</li></ul></div><p><b><i>
Testing, Validation &amp; Product Performance</i></b></p><div><ul><li>
Support prototype testing, heat runs, thermal validation, and system troubleshooting activities</li><li>
Correlate CFD models with physical testing data and refine simulations accordingly</li><li>
Analyze field performance data to identify opportunities for thermal improvement</li><li>
Participate in Root Cause Analysis for overheating, airflow imbalance, thermal failures, or reliability concerns</li></ul></div><p><b><i>
Cross-Functional Engineering Collaboration</i></b></p><div><ul><li>
Partner closely with Electrical Engineering, Structural Engineering, Manufacturing Engineering, NPI, and Operations teams</li><li>
Support customer technical discussions related to cooling performance and thermal design strategy</li><li>
Work with manufacturing teams to ensure thermal solutions align with fabrication and assembly capabilities</li><li>
Support supplier selection and technical evaluation of cooling system components and technologies</li></ul></div><p><b><i>
Design for Manufacturing (DFM) &amp; Continuous Improvement</i></b></p><div><ul><li>
Drive DFM initiatives focused on scalable thermal system integration and assembly efficiency</li><li>
Reduce unnecessary complexity while maintaining thermal performance and reliability targets</li><li>
Standardize cooling architectures, airflow strategies, and thermal design methodologies where appropriate</li><li>
Contribute to engineering standards, calculation templates, and best practices for CFD and thermal analysis</li></ul></div><p><b><i>
Technical Leadership</i></b></p><div><ul><li>
Serve as a subject matter expert for CFD analysis, airflow management, and thermal systems engineering</li><li>
Mentor junior engineers and support development of internal thermal engineering capability</li><li>
Influence system-level product architecture and cooling strategies across multiple programs</li></ul></div><p><b>
Required Qualifications</b></p><div><ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering or related engineering discipline</li><li>
6&ndash;12+ years of experience in thermal systems engineering, CFD analysis, or mechanical product development</li><li>
Strong hands-on experience performing CFD analysis for enclosed industrial systems or thermal-critical products</li><li>
Experience sizing cooling systems based on actual heat loads and thermal performance requirements</li></ul></div><p><b>
Preferred Qualifications</b></p><div><ul><li>
Experience supporting BESS, modular data centers, power systems, or energy infrastructure products</li><li>
Experience validating CFD models through physical testing and heat-run correlation</li><li>
Background in enclosure design, sheet metal, weldments, or industrial packaging</li><li>
Familiarity with UL requirements, environmental testing, and thermal compliance standards</li><li>
Experience operating in high-growth manufacturing or engineered-to-order environments</li><li>
Master&rsquo;s degree with concentration in thermal sciences, heat transfer, or fluid dynamics preferred</li><li>
Experience designing cooling systems for battery systems, power electronics, industrial skids, generator enclosures, modular data centers, switchgear, or similar equipment</li><li>
Strong understanding of airflow management within enclosed systems</li><li>
Experience with CFD tools such as ANSYS Fluent, Icepak, 6SigmaET, SolidWorks Flow Simulation, or similar platforms</li><li>
Strong understanding of mechanical integration, manufacturability, and enclosure packaging constraints</li></ul></div><p><b>
Why GTI Energy</b></p><div><ul><li>
Opportunity to solve complex real-world thermal engineering challenges tied to AI infrastructure, energy storage, and mission-critical power systems</li><li>
High-impact role influencing product architecture, reliability, and system performance</li><li>
Collaborative engineering environment with strong manufacturing integration</li><li>
Exposure to advanced modular infrastructure products and large-scale industrial systems</li><li>
Significant career growth opportunity within one of the fastest-growing manufacturers in the United States</li></ul></div></div><p></p>

Senior Mechanical Engineer - CFD

Search 4253+ Thermal technician jobs near you this May. New roles added regularly across leading industries. Apply today.

4253 thermal technician jobs Near Me

Cooling Customer Engineer-Data Center Thermal Technician

Cooling Customer Engineer-Data Center Thermal Technician

Thermal Engineer

Passive Thermal Control System (PTCS) Thermal Analysis Engineer (ADV000CIN)

Industrial Insulation Technician

Coating Specialist

Senior Mechanical Engineer - CFD