weld engineer

GTI Fabrication

<div>
 
 Position Summary
 
 
 
 GTI Fabrication is seeking a highly experienced and technically proficient Weld Engineer to lead the design, control, and continuous improvement of manufacturing processes in a modular fabrication environment. This individual contributor role focuses on developing scalable, efficient production methods for custom enclosures, containerized systems, and structural steel weldments. The ideal candidate will have deep experience in SolidWorks, AutoCAD, Lean Manufacturing, and quality systems such as ISO9001.
 
 
 The Weld Engineer will work cross-functionally with Engineering, Operations, Quality, and Supply Chain to ensure fabrication manufacturability, cost-effectiveness, and regulatory compliance across the product lifecycle.
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Design, implement, and optimize manufacturing processes for modular fabricated systems, containerized enclosures, and steel structures.
 </li>
 <li>
 Develop weld mapping and work instructions
 </li>
 <li>
 Use CAD tools (SolidWorks and AutoCAD) to design fixtures, tooling, and work-holding solutions to support scalable production.
 </li>
 <li>
 Translate engineering design requirements into robust and efficient production processes.
 </li>
 <li>
 Lead new product introduction (NPI) efforts from prototype through full-rate production.
 </li>
 <li>
 Apply Lean Manufacturing principles to reduce waste, improve flow, and optimize floor layouts.
 </li>
 <li>
 Integrate automated and digital manufacturing technologies where applicable.
 </li>
 <li>
 Collaborate with cross-functional teams to evaluate manufacturability and ensure alignment between engineering intent and production capability.
 </li>
 <li>
 Utilize ERP systems (NetSuite preferred) to manage process documentation and support real-time operations visibility.
 </li>
 <li>
 Mentor technicians and junior engineers in best practices for manufacturing engineering.
 
 
 </li>
 </ul>
 
 Required Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Weld Engineering.
 </li>
 <li>
 8&ndash;15 years of experience in weld engineering and manufacturing engineering, preferably in modular fabrication, defense, energy, or industrial equipment sectors.
 </li>
 <li>
 AWS CWI certification that is active. NDE experience a plus
 </li>
 <li>
 Proficiency in SolidWorks and AutoCAD for 3D modeling, 2D drafting, and GD&amp;T.
 </li>
 <li>
 Strong working knowledge of Lean Manufacturing, Six Sigma, or similar methodologies.
 </li>
 <li>
 Demonstrated success in process development, design for manufacturability, and production scaling.
 </li>
 <li>
 Hands-on experience with containerization, modular product platforms, and structural weldments.
 </li>
 <li>
 Knowledge of ISO9001 quality systems and compliance standards.
 </li>
 <li>
 Exceptional analytical, problem-solving, and project management skills.
 </li>
 <li>
 Excellent communication and interpersonal abilities.
 
 
 </li>
 </ul>
 
 Preferred Qualifications
 
 
 
 <ul>
 <li>
 Experience in containerized HVAC, power distribution, or control system enclosures.
 </li>
 <li>
 Familiarity with sheet metal fabrication, and industrial coatings.
 </li>
 <li>
 Certification in Lean Six Sigma, PMP, or related process improvement disciplines.
 </li>
 <li>
 Experience with CFD/FEA simulation tools.
 
 
 </li>
 </ul>
 
 Working Conditions
 
 
 
 <ul>
 <li>
 This is a full-time onsite position based in Phoenix, AZ.
 </li>
 <li>
 Work takes place in both offices and fabrication of floor environments.
 </li>
 <li>
 May require occasional travel to customer sites or GTI facilities.
 </li>
 <li>
 Must be able to occasionally lift up to 25 lbs and walk fabrication areas.
 
 
 </li>
 </ul>
 GTI Fabrication is an equal opportunity employer committed to building a diverse and inclusive workplace.
</div>

Welding Engineer

SpaceX

<div>
 SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
 
 
 
 SR. WELDING ENGINEER
 
 
 
 This position will support manufacturing and development of SpaceX&rsquo;s Falcon 9 and Starship launch vehicles, Dragon spacecraft, and Starlink satellites alongside a strong group of design and build engineers. The person in this position will help develop, qualify, and optimize welding designs and processes including but not limited to; electron beam welding, laser beam welding, gas tungsten arc welding, orbital tube welding, resistance welding, gas metal arc welding, and plasma arc welding. The welding engineer in this role will interface daily with design and manufacturing engineers to make welding judgment calls and improvements and will enforce standardized practices and procedures on multiple welded assemblies.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Develop, optimize, and qualify weld processes and parameters for multiple welding processes including but not limited to: electron beam welding, laser beam welding, gas tungsten arc welding, orbital tube welding, resistance welding, gas metal arc welding, friction stir welding, and plasma arc welding
 </li>
 <li>
 Support production operations on full scale welded assemblies, providing direction to manufacturing engineers and welders on correct techniques in a fast paced manufacturing environment
 </li>
 <li>
 Support design, manufacturing, and materials engineering with root cause analysis
 </li>
 <li>
 Work closely with design, tooling, automation, and development engineers to improve welded designs for manufacturing
 </li>
 <li>
 Set up welding qualification test campaigns and interpret mechanical testing and NDE results
 </li>
 <li>
 Work closely with NDE personnel to interpret weld quality on development and flight hardware in addition to developing and implementing innovative state-of-the-art NDE techniques
 </li>
 <li>
 Develop and implement improved process control where possible using test and NDE results as feedback loop
 </li>
 <li>
 Set up automated welding solutions in an effort to drive process consistency
 </li>
 <li>
 Scope out new welding technologies that may be employed to improve rate/quality/efficiency
 </li>
 <li>
 Support on-site manufacturing and development of Starlink, F9, Dragon, Starship, and related propulsion engines
 
 
 </li>
 </ul>
 
 Basic Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in an engineering discipline
 </li>
 <li>
 5+ years of experience with hands-on fabrication, manufacturing, or testing experience of welded assemblies
 
 
 </li>
 </ul>
 
 Preferred Skills And Experience
 
 
 
 <ul>
 <li>
 Master&rsquo;s degree in welding engineering or related technical program
 </li>
 <li>
 Hands on welding experience of stainless steel, nickel-based, titanium, copper, and aluminum alloys
 </li>
 <li>
 Experience with brazing, joining, and metallographic interpretation
 </li>
 <li>
 Fundamental understanding of welding processes including, but not limited to, electron beam, laser beam, plasma arc, resistance, friction-stir, gas tungsten arc, and gas metal arc
 </li>
 <li>
 Robot programming experience for automated welding solutions
 </li>
 <li>
 Tooling design experience for welded assemblies to reduce part distortion and improve part consistency
 </li>
 <li>
 Understanding of weld strength testing methodologies, standards, and data acquisition systems used to make informed welding decisions (ASTM E8, E399, E740, ISO 15653, AWS D17.X, AWS C7.X, thermos-couples, strain gages, etc.)
 </li>
 <li>
 Experience with root cause analysis and corrective actions including, but not limited to, optical and SEM fractography/metallography, hardness, chemical analysis, and mechanical testing
 </li>
 <li>
 Self-motivated engineer with keen attention to detail
 </li>
 <li>
 Strong ability to multi-task and communicate status and results with broad spectrum of internal and external departments
 
 
 </li>
 </ul>
 
 Additional Requirements
 
 
 
 <ul>
 <li>
 Willing to work long hours and weekends as needed to support and maintain build schedules
 </li>
 <li>
 Travel may be required to other SpaceX facilities in Texas and Washington state (up to 50%)
 </li>
 <li>
 Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand
 
 
 </li>
 </ul>
 
 Pay Range
 
 
 
 
 COMPENSATION AND BENEFITS:
 
 
 
 Sr. Welding Engineer: $130,000.00 - $180,000.00/per year
 
 
 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
 
 
 Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law.
 
 
 
 Itar Requirements
 
 
 
 <ul>
 <li>
 To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C.
 </li>
 <li>
 1157, or (iv) Asylee under 8 U.S.C.
 </li>
 <li>
 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
 
 
 </li>
 </ul>
 SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
 
 
 Applicants wishing to view a copy of SpaceX&rsquo;s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com
 
 .
 
</div>

Sr. Welding Engineer

Tmak

Minimum Qualifications: B.E./B.Tech in Mechanical/ Welding Engineering or related discipline.Additional Qualification: Knowledge and practical experience of welding procedures such as SMAW, FCAW, GMAW, GTAW and SAW.Minimum Experience: 2 - 5 years post qualification experience in welding engineering. Licensed Professional Engineer or AWS Certified Welding Engineer status.Job-Specific Skills:<ul><li>Ability to communicate effectively both orally and in writing through memos and engineering reports.</li><li>Understanding of mechanical and structural components as it relates to welding engineering assessments and recommendations.</li><li>Fundamental knowledge in NDE; ability to categorize and quantify weld defects.</li><li>Must be able to work well with others in a team setting.</li><li>Must be able to effectively handle many concurrent projects.</li><li>Experience in welding carbon and low alloy steels, stainless steels and nickel based alloys.</li></ul>Generic Skills:&sect; Excellent interpersonal and problem solving skills.&sect; Attention to detail and documentation.&sect; Exposure to MS Office packages &ndash; Excel, Word, PowerPoint&sect; Knowledge or experience in the Oil and Gas Industry.&sect; Knowledge of laser and friction welding processes.&sect; Knowledge of quality systems.&sect; NDE Experience.3. JOB PURPOSE:To provide welding engineering consulting services for engineering, manufacturing, and quality departments. Conduct welding engineering projects to enhance the function, profitability or marketability of the products. Develop, qualify and provide technical expertise with procedures and welding techniques to support the fabrication of equipment.4. JOB DIMENSIONS:Number of Staff Supervised:Direct Reports:15Total:155. KEY RESPONSIBILITIES:&sect; Analyse engineering designs for welding requirements.&sect; Has responsibility of coordinating multiple projects and directing outside test laboratories and contract welding facilities.&sect; Plan, conduct, track and report welding engineering investigations.&sect; Review subcontractor welding code and design requirements are satisfied.&sect; Oversee welding procedure qualification and generate welding procedures to assist manufacturing and welding personnel.&sect; Investigate new developments in the field of welding to evaluate their possible application to improve or remedy existing welding processes.&sect; Provide welding engineering support to Engineering, Quality and Manufacturing to fabricate equipment in accordance with all applicable code and customer requirements.&sect; Provide technical support with industry standards and specifications such as ASME Boiler and Pressure Vessel Code, AWS, API, CSA, ISO and NACE.&sect; Coordinate failure analysis and root cause analysis on welding related issues.6. COMMUNICATIONS &amp; WORKING RELATIONSHIPS:Internal: &sect; Projects Engineers, Planning Engineers &ndash; Frequently on a daily basis.&sect; Technical Department &ndash; Daily basis for coordination and status update.External: &sect; Contractors &ndash; Regularly through progress meetings.&sect; Consultants. - Business related.&sect; Customers/Dealers - Business related &ndash; Daily.7. FRAMEWORKS, BOUNDARIES &amp; DECISION MAKING AUTHORITY:&sect; Decisions making in relation to the Project function including site activities.&sect; Decisions related to the Operations of the Department.Job Types: Full-time, PermanentPay: AED10,000.00 - AED12,000.00 per monthWork Location: In person

<div>
 SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
 
 
 
 WELDING MANAGER, STARSHIP BUILD
 
 
 
 The Starship Production Manager is responsible for up to 120 technicians and the on-floor activities of key assembly and/or service work centers. This is a dynamic position that requires the ability to monitor and create actions for key department metrics while managing production schedules, identifying risks, and clearly communicating them to key stakeholders. As a Manager, Production you will lead several complex, multi-disciplinary production teams/projects and will be required to dive into the unique engineering challenges we face daily in building rocket engine hardware.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Lead and manage a staff of 40+ employees per shift (up to 120 on 2 shifts)
 </li>
 <li>
 Manage modification, repair, assembly, and integration of production assemblies in order to guarantee achievement of on time delivery and quality targets
 </li>
 <li>
 Manage the complete production process within a predefined area, and ensure safety at all times
 </li>
 <li>
 Resolve reoccurring non-conformance issues
 </li>
 <li>
 Review work instructions, and make change recommendations when needed
 </li>
 <li>
 Meet tight production schedules to achieve high rate production
 </li>
 <li>
 Provide technical support to the welding team
 </li>
 <li>
 Work with management and engineering teams to streamline the fit-up and welding processes
 </li>
 <li>
 Assist with the tooling and fixturing designs required for weld / fit-up operation
 </li>
 <li>
 Responsible for control of production weld quality
 </li>
 <li>
 Apply welding codes and hold high workmanship standards with the production team
 </li>
 <li>
 Assess, staff, and vet the appropriate skill sets needed
 </li>
 <li>
 Monitor material costs and cost savings
 </li>
 <li>
 Identify and set-up training programs
 </li>
 <li>
 Develop, initiate, coordinate, and enforce system policies and procedures
 </li>
 <li>
 Monitor labor hours/overtime, and implement improvement plans and time management with staff
 </li>
 <li>
 Manage capacity planning of equipment and personnel
 </li>
 <li>
 Coordinate with engineering and other departments to minimize production interruptions
 </li>
 <li>
 Think creatively, and question the status quo while following documentation and maintaining prescribed quality standards
 </li>
 <li>
 Develop and ensure adequate machine maintenance schedules and back-up spares availability
 
 
 </li>
 </ul>
 
 Basic Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree or associate degree and 4+ years of gas tungsten arc welding (GTAW), flux-cored arc welding (FCAW), or gas metal arc welding (GMAW) experience
 </li>
 <li>
 3+ years of management experience
 
 
 </li>
 </ul>
 
 Preferred Skills And Experience
 
 
 
 <ul>
 <li>
 Experience bringing teams and processes from development to production
 </li>
 <li>
 Ability to effectively communicate with engineering and production (verbal and written)
 </li>
 <li>
 Experience being detailed oriented with outstanding work efficiency and accuracy
 </li>
 <li>
 Experience with schematics: engineering drawings, circuit layouts, and parts list/cable
 </li>
 <li>
 Experience with harnesses: wiring diagrams, layout drawings, and parts list
 </li>
 <li>
 Experience with mechanical assemblies: mechanical drawings and parts lists
 </li>
 <li>
 Strong leadership skills
 </li>
 <li>
 General welding, cutting, and fabrication equipment knowledge, theory, application, maintenance and testing
 </li>
 <li>
 Ability to interpret drawings and weld symbols per AWS D17.1
 </li>
 <li>
 Knowledge of AWS D1.1, D1.6, and D1.2
 </li>
 <li>
 Fabrication of large-scale welded assemblies to tight dimensional tolerances
 </li>
 <li>
 Trade school certificate
 </li>
 <li>
 Possess safety training experience and/or safety certifications
 </li>
 <li>
 Experience monitoring, tracking, and continually improving total cost equation
 </li>
 <li>
 Experience with applying lean manufacturing principles and efficiency methods
 </li>
 <li>
 Ability to adapt to constant changing work assignments and a fast-paced work environment
 
 
 </li>
 </ul>
 
 Additional Requirements
 
 
 
 <ul>
 <li>
 Must be willing to work all shifts, extended hours, and/or weekends as needed
 </li>
 <li>
 Ability to travel for short and extended trips as needed (up to 10%)
 </li>
 <li>
 Ability to pass Air Force background checks for Cape Canaveral and Vandenberg
 
 
 </li>
 </ul>
 
 Itar Requirements
 
 
 
 <ul>
 <li>
 To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C.
 </li>
 <li>
 1157, or (iv) Asylee under 8 U.S.C.
 </li>
 <li>
 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
 
 
 </li>
 </ul>
 SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
 
 
 Applicants wishing to view a copy of SpaceX&rsquo;s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com
 
 .
 
</div>

Welding Manager, Starship Build

The Shaw Group

<div>
 
 
 About Us
 
 
 
 The Shaw Group is a global leader offering over 1.9 million square feet of fabrication and manufacturing capacity worldwide. Specializing in premier project delivery services, the company provides module fabrication, including engineering, design, and procurement, as well as pipe fabrication and pipe bending services. Serving a diverse range of industries and industrial clients, The Shaw Group is committed to excellence in every project. Our team delivers innovative solutions that meet the specific needs of our global clients.
 
 
 
 
 
 
 Role Description
 
 
 
 As a
 
 Welding Engineer
 
 , you will drive the creation and qualification of welding procedures that uphold customer expectations and industry best practices. You will play a critical role in safeguarding the integrity of welded components through hands‑on technical leadership, process oversight, and cross‑functional collaboration.
 
 
 
 
 
 
 REPORTING TO:
 
 
 
 QA/QC Manager
 
 
 
 
 
 
 Minimum Qualification:
 
 
 
 
 Master&rsquo;s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or related field.
 
 
 
 
 
 
 
 Minimum Experience:
 
 
 <ul>
 <li>
 Minimum 5 -10 years of experience in welding and fabrication within oil &amp; gas, or industrial projects.
 </li>
 <li>
 
 Professional certification in welding engineering (IWE,
 
 CWE, or another acceptable equivalent.
 </li>
 <li>
 ASNT Level II in RT, UT, MT, and PT.
 </li>
 <li>
 Hands-on experience in piping fabrication, spool welding, and erection.
 </li>
 <li>
 Strong knowledge of welding codes, standards, and metallurgy.
 </li>
 <li>
 Proficiency in welding simulation and design software is a plus.
 </li>
 </ul>
 
 
 
 
 
 SPECIFIC RESPONSIBILITIES:
 
 
 
 
 
 
 
 Technical Review &amp; Planning
 
 
 <ul>
 <li>
 Analyze customer drawings and specifications to determine material and welding requirements.
 </li>
 <li>
 Identify and develop appropriate Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).
 </li>
 <li>
 Select suitable electrodes and consumables; estimate quantities required for projects.
 </li>
 <li>
 Source materials necessary for WPS/PQR development.
 </li>
 <li>
 Design and optimize welding joints and processes for quality and efficiency.
 </li>
 <li>
 Apply relevant codes and standards (e.g., ASME, AWS, ISO) to proposed welding procedures.
 </li>
 </ul>
 
 
 
 
 
 Execution &amp; Supervision
 
 
 <ul>
 <li>
 Supervise the implementation of welding procedures and welder qualification tests.
 </li>
 <li>
 Witness and oversee PQR testing on-site and in laboratories.
 </li>
 <li>
 Prepare and maintain WPS documentation.
 </li>
 <li>
 Review and approve welder qualification records.
 </li>
 <li>
 Assess and manage production weld testing requirements, ensuring timely execution and reporting.
 </li>
 </ul>
 
 
 
 
 
 Collaboration &amp; Problem Solving
 
 
 <ul>
 <li>
 Consult with customer engineers and production supervisors to resolve metallurgical and welding-related issues.
 </li>
 <li>
 Support the development and implementation of automated welding systems and innovative methodologies.
 </li>
 </ul>
 
 
 
 
 
 Training &amp; Development
 
 
 <ul>
 <li>
 Supervise activities in the metallurgical laboratory.
 </li>
 <li>
 Oversee welding school operations and training programs.
 </li>
 <li>
 Monitor and evaluate welder performance and provide technical guidance.
 </li>
 </ul>
 
 
 
 
 
 Why Join Us
 
 
 <ul>
 <li>
 Regional leadership role with real strategic and financial ownership.
 </li>
 <li>
 Opportunity to shape how projects are delivered across MENA.
 </li>
 <li>
 High-impact position working with senior leadership and major clients.
 </li>
 <li>
 Platform to build long-term, profitable, repeat business across the region.
 </li>
 </ul>
 
 
 
 
 
 Location &amp; Travel
 
 
 
 Bahrain
 
 
 
 
 
 
 EEO &amp; Inclusion
 
 
 
 We are an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. If you need accommodation during the interview process, please let us know.
 
 
 
</div>

H.I.R.E Talent Group

<div>We are looking for an experienced MIG/TIG Welder to join our fabrication shop in Conroe, TX. This is a senior-level role for someone who brings precision, craftsmanship, and a strong work ethic to every job. If you take pride in quality welds and want to be part of a solid team, we want to hear from you.

What You'll Do
<ul>
<li>Perform MIG and TIG welding on fabrication projects to spec</li>
<li>Read and interpret blueprints and technical drawings</li>
<li>Inspect welds for quality and adherence to standards</li>
<li>Set up and operate welding equipment safely and efficiently</li>
<li>Collaborate with shop team on fabrication and assembly tasks</li>
<li>Maintain a clean, organized, and safe work environment</li>
<li>Follow all safety protocols and procedures</li>
</ul>
What You'll Need
<ul>
<li>5+ years of hands-on MIG and TIG welding experience</li>
<li>Strong ability to read and interpret blueprints</li>
<li>High attention to detail and commitment to weld quality</li>
<li>Experience in a fabrication shop environment</li>
<li>Welding certification preferred but not required</li>
<li>Reliable, professional, and a strong team contributor</li>
</ul>
What We Offer
<ul>
<li>Competitive pay based on experience</li>
<li>Full-time, stable schedule</li>
<li>Supportive fabrication shop environment</li>
<li>Opportunity to do meaningful, skilled work every day.</li></ul></div>

Architectual Welder

RMS Energy Co, LLC

<div>
 We&rsquo;re looking for a
 
 Certified Welding Inspectors (CWI) t
 
 o perform accurate and thorough weld inspections across diverse field projects while also supporting training and development initiatives within the organization. This role demands exceptional technical expertise, documentation accuracy, adaptability, and communication skills to effectively ensure weld quality, regulatory compliance, and the transfer of knowledge to junior inspectors and welders. This role is essential for maintaining the highest standards of weld quality across field projects, ensuring compliance with AWS codes and client specifications, and providing training that strengthens the skills of both inspectors and welders.
 
 
 
 What You&rsquo;ll Do
 
 
 
 <ul>
 <li>
 Conduct weld inspections on project sites to ensure compliance with AWS codes, client specifications, and safety standards.
 </li>
 <li>
 Perform visual examinations of welds and welding procedures, accurately identifying quality issues.
 </li>
 <li>
 Uphold quality standards even when under dual reporting structures (project lead vs. quality management).
 </li>
 <li>
 Prepare detailed, accurate weld inspection reports, including documentation of welders, inspections performed, and results.
 </li>
 <li>
 Support training initiatives by mentoring junior inspectors and welders.
 </li>
 <li>
 Assist in the development and delivery of welding/inspection training materials.
 </li>
 <li>
 Share technical knowledge to raise the competency of the workforce, with emphasis on inspection fundamentals and proper welding practices.
 </li>
 <li>
 Report directly to the Quality Manager while also collaborating with project supervisors during field assignments.
 </li>
 <li>
 Clearly communicate inspection results, corrective actions, and recommendations to stakeholders.
 </li>
 <li>
 Coordinate with project teams to resolve discrepancies in weld quality and reporting.
 </li>
 <li>
 Verify welding safety compliance by inspecting PPE, equipment condition, grounding, ventilation, and adherence to OSHA and site-specific requirements during weld inspections.
 </li>
 <li>
 Assume other duties as assigned.
 
 
 </li>
 </ul>
 
 The Experience We&rsquo;re Looking For
 
 
 
 <ul>
 <li>
 Current AWS Certified Welding Inspector (CWI) credential.
 </li>
 <li>
 3&ndash;5 years of weld inspection experience, beyond entry-level.
 </li>
 <li>
 Proficiency in weld inspection and documentation.
 </li>
 <li>
 Strong reporting and organizational skills.
 </li>
 <li>
 Ability to interpret blueprints and welding procedure specifications.
 </li>
 <li>
 Excellent communication and interpersonal skills.
 </li>
 <li>
 Demonstrated ability to work independently under a dual-supervisory structure.
 </li>
 <li>
 Exceptional communication and presentation skills, with a strong customer focus and the ability to effectively convey complex information to diverse audiences.
 </li>
 <li>
 Excellent organizational, time management, leadership, and decision-making skills, demonstrating a capacity for managing multiple priorities and driving project success.
 
 
 </li>
 </ul>
 
 Additional Requirements
 
 
 
 <ul>
 <li>
 Ability to travel up to 50% throughout the continental USA, reflecting flexibility and commitment to project needs.
 </li>
 <li>
 Ability to pass a stringent drug screening and background check, ensuring compliance with organizational standards and policies.
 </li>
 <li>
 Hold a valid and current driver's license
 
 
 </li>
 </ul>
 
 Why Join RMS Energy
 
 
 
 We&rsquo;re not just another power services company. We&rsquo;re a tight-knit, mission-driven team that values safety, teamwork, innovation, and continuous growth.
 
 
 <ul>
 <li>
 Competitive Compensation &ndash; Overtime potential and merit-based raises
 </li>
 <li>
 Full Benefits &ndash; Medical, dental, and vision coverage fully paid for employees, starting the month after hire
 </li>
 <li>
 Steady Employment &amp; Career Growth &ndash; Be part of a fast-growing company with promotion potential
 </li>
 <li>
 401(k) with Company Match &ndash; Traditional &amp; Roth options + free investment guidance
 </li>
 <li>
 Top-Tier Equipment &ndash; Provided to support you in the field
 </li>
 <li>
 Compensated Travel Time plus Per Diem &ndash; Earn while seeing new places
 </li>
 <li>
 Education Support &ndash; Paid training, certifications, and industry memberships
 </li>
 <li>
 Generous PTO &ndash; Paid vacation, holidays, and sick leave
 </li>
 <li>
 Employee Assistance Program &ndash; Legal, financial, and mental wellness support
 
 
 </li>
 </ul>
 
 Want to be part of something meaningful?
 
 
 
 
 Apply today
 
 and join a team where
 
 People, Purpose, and Power
 
 come together &ndash;
 
 your future starts here.
 
 
 
 RMS Energy is an Equal Opportunity Employer. We believe diverse teams drive better outcomes, and we&rsquo;re committed to creating an inclusive environment where all employees feel valued and empowered.For more information about RMS Energy, please visit www.rmsenergy.com.
</div>

Certified Welding Inspector (CWI)

Search 3523+ Weld engineer jobs near you this May. New roles added regularly across leading industries. Apply today.

3523 weld engineer jobs Near Me

Welding Engineer

Sr. Welding Engineer

Welding Engineer

Welding Manager, Starship Build

Welding Engineer

Architectual Welder

Certified Welding Inspector (CWI)