weld inspector

SQA Services, Inc.

<div>
 For almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors.
 
 
 We are seeking a detail-oriented Welding Inspector to ensure the quality, compliance, and integrity of welded components and assemblies. This role is responsible for performing inspections, verifying documentation, and ensuring all materials and workmanship meet applicable standards, drawings, and specifications. This position with be on site 5 days a week, for 4-8 hours a day. This is a 3-6 month contract.
 
 
 
 Key Responsibilities:
 
 
 
 
 <ul>
 <li>
 Perform visual inspection (VT) of structural welds in accordance with AWS D1.1 acceptance criteria
 </li>
 <li>
 Evaluate weld workmanship and surface condition
 </li>
 <li>
 Identify weld discontinuities including:
 </li>
 <ul>
 <li>
 Cracks
 </li>
 <li>
 Undercut
 </li>
 <li>
 Porosity
 </li>
 <li>
 Overlap
 </li>
 <li>
 Incomplete fusion indications
 </li>
 <li>
 Arc strikes
 </li>
 <li>
 Excessive reinforcement
 </li>
 <li>
 Crater defects
 
 
 </li>
 </ul>
 <li>
 Verify weld profiles, weld size, and contour requirements
 </li>
 <li>
 Inspect fillet welds, groove welds, CJP and PJP welds
 </li>
 <li>
 Welding Documentation Review
 </li>
 <ul>
 <li>
 Review and verify approved WPS documentation
 </li>
 <li>
 Confirm welder qualifications and continuity records
 </li>
 <li>
 Verify welding processes and consumables comply with approved procedures
 </li>
 <li>
 Review fabrication drawings and weld symbols
 </li>
 <li>
 Ensure inspection requirements are properly flowed down
 
 
 
 
 </li>
 </ul>
 </ul>
 
 In-Process and Final Inspection
 
 
 
 <ul>
 <li>
 Perform pre-weld, in-process, and final inspections
 </li>
 <li>
 Verify fit-up, joint preparation, alignment, and cleanliness
 </li>
 <li>
 Monitor workmanship during fabrication activities
 </li>
 <li>
 Verify repairs and rework activities meet acceptance criteria
 </li>
 <li>
 Coordinate with NDE personnel when required
 
 
 
 
 </li>
 </ul>
 
 Reporting and Documentation
 
 
 
 <ul>
 <li>
 Generate inspection reports and nonconformance documentation
 </li>
 <li>
 Document weld findings accurately and clearly
 </li>
 <li>
 Provide objective disposition recommendations
 </li>
 <li>
 Support corrective action and root cause investigations
 </li>
 <li>
 Maintain inspection records and traceability documentation
 
 
 
 
 </li>
 </ul>
 
 Supplier / Source Inspection Support
 
 
 
 <ul>
 <li>
 Perform source inspections at supplier facilities when required
 </li>
 <li>
 Support supplier quality evaluations and audits
 </li>
 <li>
 Communicate technical concerns professionally with suppliers and customers
 </li>
 <li>
 Assist in process improvement and workmanship standardization activities
 
 
 
 
 </li>
 </ul>
 
 Required Qualifications:
 
 
 
 
 <ul>
 <li>
 Education / Experience
 </li>
 <ul>
 <li>
 High school diploma or equivalent required
 </li>
 <li>
 Technical training in welding inspection preferred
 </li>
 <li>
 Minimum 3-5 years of structural welding inspection experience preferred
 </li>
 <li>
 Experience inspecting structural steel fabrication and welded assemblies
 
 
 
 
 </li>
 </ul>
 </ul>
 
 Technical Knowledge
 
 
 Strong working knowledge of:
 
 
 
 <ul>
 <li>
 AWS D1.1 requirements
 </li>
 <li>
 AWS B1.11 visual inspection practices
 </li>
 <li>
 Weld symbols and fabrication drawings
 </li>
 <li>
 Welding processes:
 </li>
 <ul>
 <li>
 FCAW
 </li>
 <li>
 GMAW
 </li>
 <li>
 SMAW
 </li>
 <li>
 GTAW (preferred)
 
 
 </li>
 </ul>
 <li>
 Structural steel fabrication practices
 </li>
 <li>
 Weld gauges and inspection tools
 </li>
 <li>
 Weld discontinuities and workmanship evaluation
 
 
 </li>
 </ul>
 
 
 
 Preferred Qualifications:
 
 
 
 
 <ul>
 <li>
 Certified Welding Inspector (CWI)
 </li>
 <li>
 VT Level II certification
 </li>
 <li>
 NDE certifications (MT/PT preferred)
 </li>
 <li>
 OSHA safety training
 </li>
 <li>
 Structural steel fabrication experience
 
 
 
 
 </li>
 </ul>
 
 Note:
 
 This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role.
 
 
 SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status.
 
 
 #ZR
 
 
 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.
</div>

Quality Inspector - Welding - GO

Lexicon, Inc.

<div>Are you ready to start &ldquo;Building America&rdquo;? At Lexicon, we're seeking a skilled NDE Inspector, Certified Welding Inspector (CWI) to join our team to build some of the most impressive steel structures in the world! With competitive pay &amp; benefits, this role presents an exciting opportunity for growth and development! Multiple shifts are available, including Day, Night, and Weekend shifts, with an additional 4-hour bonus for weekend shift employees.
If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon!
Lexicon Benefits<ul><li>
Health, Dental, Vision, and Life Insurance</li><li>
HSA with employer contributions</li><li>
Life Insurance</li><li>
Paid Holidays and Vacation</li><li>
401k with company match</li><li>
Lexicon University
</li></ul>Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families.
NDE Inspector, Certified Welding Inspector (CWI) Responsibilities:<ul><li>
Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document</li><li>
Interpret codes and specifications in accordance with the drawing requirements</li><li>
Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications</li><li>
Recommend and approve repairs as well as perform visual inspection of work in progress and completed work</li><li>
Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures</li><li>
Verify and document welder qualifications</li><li>
Verify the compliance of base metals with the applicable specifications</li><li>
Appraise welding joint designs and joint preparations for compliance with drawing</li><li>
Verify proper fit, cleanliness, and environmental conditions</li><li>
Verify tack weld quality</li><li>
Verify preheat and interpass temperatures</li><li>
Assure the proper control and handling of welding consumables</li><li>
Verify the interpass and final cleaning</li><li>
Assure product conformity to drawings and specifications</li><li>
Verify cleanliness and weld surface quality</li><li>
Perform various NDT examinations (VT), (PT), (MT), (UT)</li><li>
Oversee repair activities</li><li>
Verify the proper performance of post-weld heat treatments</li><li>
Confirm adequate documentation of fabrication and inspection activities</li><li>
Assist in training and developing of other teammates</li><li>
Support the development of NDE inspection techniques for complex geometries</li><li>
Interpret and review engineering drawings as required</li><li>
Interpret, evaluate, communicate, and report findings to production and engineering teams</li><li>
The ability to work overtime, weekends, and regular, punctual attendance is required</li></ul>
Basic Qualifications:<ul><li>
High school diploma or equivalency certificate</li><li>
Must be able to read and understand blueprints and shop drawings and pass an inspector test</li><li>
Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry</li><li>
Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification</li></ul>
Preferred Skills and Experience:<ul><li>
5 years of experience in a steel fabrication shop environment</li><li>
Previous fitting and welding experience is required</li><li>
Current American Welding Society (AWS) Certified Welding Inspector (CWI) certification</li><li>
Additional nondestructive Evaluation Level II or III certifications in line with ASNT TC-1A guidance in one of the following methods: Visual Inspection (VT), Liquid Dye Penetrant Inspection (PT), or Magnetic Particle Inspection (MT), or Ultrasonic Inspection (UT or UT-SW)</li><li>
Extensive knowledge of industry standards including AISC, AWS, CWB, and ASME</li><li>
Level II in SSPC/NACE/AMPP</li></ul>
Physical Demands:<ul><li>
Must be able to lift 50lbs unassisted, bend, stretch, stand for extended periods of time, climb stairs, reach, twist, stoop, push, pull, sit, and walk frequently and be able to climb 25 ft.</li><li>
Exposure to temperature fluctuations and loud work environment.</li><li>
Occasional opportunity for travel with overnight stays.</li></ul>
This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment.</div>

NDE Inspector, Certified Welding Inspector (CWI)

ARCO HUMAN RESOURCES

National : India and PhilippinesQC Welding InspectorBachelor's degree in engineering or a diploma in mechanical/metallurgical engineering, with at least 8-12 years of experience, including 5-8 years in Aramco projects (SAES/SAMSS standards). Essentialcertifications include AWS-CWI or CSWIP 3.1.Plus a valid Saudi Aramco CBT approval (SAP number).Key Requirements for QC Welding Inspectors: Approval &amp; Certification: Must be Saudi Aramco-approved with a valid CBT pass. Mandatorycertifications include AWS-CWI (American Welding Society) or CSWIP 3.1 (CertificationScheme for Welding and Inspection Personnel). Experience: Minimum 8 years of experience in oil &amp; gas construction, specifically in weldinginspection. Education: Bachelor&rsquo;s degree in Engineering (Mechanical/Metallurgical) or a 3-year Diploma inMechanical Engineering. Technical Skills: Expertise in welding codes (ASME Section IX, AWS D1.1, API 1104), NDTmethods (RT, UT, MT, PT), and Post-Weld Heat Treatment (PWHT).Pay: ﷼7,000.00 - ﷼8,000.00 per monthWork Location: In person

QAQC WELDING INSPECTOR (ARAMCO CBT APPROVED/APPROVAL

WSP in the U.S.

<div>
 
 Job Description
 
 
 
 
 This Opportunity
 
 
 
 WSP is currently seeking a
 
 Structural Steel Inspector CWI NDT
 
 to join our team in
 
 San Diego, CA
 
 . This is a technical field position with some laboratory testing expected. AWS Certified Welding Inspector (CWI) Certification is required with experience in inspection of structural steel fabrication and erection, familiarity with AWS Codes D1.1, along with ASNT NDT Level II certification in Magnetic Particle Testing (MT) and Ultrasonic Testing (UT). The ideal candidate will be available for immediate employment for projects in Southern California, mainly in San Diego County. There could be opportunities for travel to various locations within the US (optional, if the inspector is agreeable to travel).
 
 
 
 Your Impact
 
 
 
 <ul>
 <li>
 Inspection of welding, steel fabrication, and steel erection.
 </li>
 <li>
 Monitoring work for compliance with approved shop drawings, standards, and specifications.
 </li>
 <li>
 Inspection and evaluation of corroded and/or damages steel members.
 </li>
 <li>
 Inspection of repair welding and coatings.
 </li>
 <li>
 Communication and interaction with owners, fabricators, engineers, and other CWIs and NDT technicians.
 </li>
 <li>
 Review submittals (welding plans, WPS, WPQR, Welder Certification, shop drawings, quality control reports) for compliance to the project requirements.
 </li>
 <li>
 Writing daily shop / field reports in digital format.
 </li>
 <li>
 Participate in WSP safety meetings.
 
 
 </li>
 </ul>
 
 Who You Are
 
 
 
 
 Required Qualifications
 
 
 
 <ul>
 <li>
 High School Diploma.
 </li>
 <li>
 Minimum of 7 years of relevant post education experience in discipline.
 </li>
 <li>
 AWS Certified Welding Inspector with (CWI) Certification
 </li>
 <li>
 ASNT NDT Level II Certification (UT and MT)
 </li>
 <li>
 Experience performing QA/QC during structural steel fabrication
 </li>
 <li>
 Dependability, honesty, and integrity
 </li>
 <li>
 Computer Skills: Microsoft Windows, Microsoft Office applications, Adobe PDFs
 </li>
 <li>
 Strong verbal and written communication skills
 </li>
 <li>
 Must be able to work well independently and with others
 </li>
 <li>
 Decision making skills
 </li>
 <li>
 Self-starter
 </li>
 <li>
 Must be willing to travel as needed, including overnight stays when out of town
 </li>
 <li>
 Valid Driver License
 </li>
 <li>
 Sufficient physical stamina to work long hours indoors and outdoors under various field conditions and exposure to traffic, extreme heat, cold, rainfall, and snow
 </li>
 <li>
 Climbing, bending, crawling, and working in confined spaces and on uneven terrain
 </li>
 <li>
 Ability to lift 25+ lbs.
 </li>
 <li>
 Must pass a physical and background check and must have a satisfactory driving record in accordance with the Company's driving (MVR) policy
 </li>
 <li>
 Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek.
 </li>
 <li>
 Occasional travel may be required depending on project-specific requirements.
 
 
 </li>
 </ul>
 
 Preferred Qualifications
 
 
 
 <ul>
 <li>
 Any ICC special inspector certifications.
 </li>
 <li>
 City of San Diego Special Inspector Registration.
 </li>
 <li>
 ACI Concrete Field Testing Technician - Grade I.
 </li>
 <li>
 NACE / AMPP or SSPC Coatings Certification.
 </li>
 <li>
 ASNT NDT Level II Certifications such as RT, PT, and PAUT.
 
 
 </li>
 </ul>
 
 WSP Benefits
 
 
 
 WSP provides a comprehensive suite of benefits focused on providing health and financial stability throughout the employee&rsquo;s career. These benefits include coverage related to medical, dental, vision, disability, and life; retirement savings; paid sick leave; paid vacation (or other personal time); paid parental leave; and paid time off for purposes of bereavement, voting, and/or attendance at naturalization proceedings.
 
 
 
 Compensation
 
 
 
 Expected Salary: $40.00- $55.00
 
 
 WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant&rsquo;s education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location. WSP USA reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant&rsquo;s sex or other status protected by local, state, and/or federal law.
 
 
 
 About WSP
 
 
 
 
 ABOUT US
 
 
 
 WSP USA is the U.S. operating company of WSP, one of the world's leading engineering and professional services firms. Dedicated to serving local communities, we are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper.
 
 
 www.wsp.com
 
 
 WSP provides a flexible and agile workplace model while meeting client needs. Employees are also afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings focused on providing health and financial stability throughout the employee&rsquo;s career.
 
 
 At WSP, we want to give our employees the challenges they seek to grow their careers and knowledge base. Your daily contributions to your team will be essential in meeting client objectives, goals and challenges. Are you ready to get started?
 
 
 WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status.
 
 
 The selected candidate must be authorized to work in the United States.
 
 
 
 Notice To Third Party Agencies
 
 
 
 WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation &ndash; no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.
 
 
</div>

Structural Steel Inspector CWI NDT

Milestone Industrial Steel

Quality Control InspectorSteel Fabrication ShopPosition SummaryThe Quality Control (QC) Inspector is responsible for ensuring all fabricated steel products meet project specifications, customer requirements, applicable codes, and company quality standards. This position works closely with shop personnel, project managers, welders, fitters, and field crews to verify quality throughout fabrication and before shipment.Essential Duties &amp; Responsibilities Quality Inspection<ul><li>Perform in-process and final inspections of fabricated structural and miscellaneous steel components.</li><li>Verify dimensions, hole locations, fit-up, weld quality, camber, and assembly accuracy against approved shop drawings.</li><li>Ensure materials match approved drawings, material test reports (MTRs), and project specifications.</li><li>Inspect incoming materials for damage, correct grade, and compliance with purchase orders.</li><li>Conduct visual weld inspections in accordance with applicable AWS standards.</li><li>Verify proper weld sizes, lengths, locations, and welding procedures are being followed.</li><li>Ensure fabricated assemblies meet customer and contract requirements before shipment.</li></ul>Documentation &amp; Reporting<ul><li>Maintain quality inspection records and reports.</li><li>Track and document non-conformance reports (NCRs).</li><li>Create punch lists and coordinate corrective actions with production personnel.</li><li>Review shop drawings, erection drawings, specifications, and RFIs for quality requirements.</li><li>Maintain weld logs, inspection reports, calibration records, and material traceability documentation.</li><li>Assist with customer audits and third-party inspections.</li></ul>Process Improvement<ul><li>Identify quality concerns and recommend corrective actions.</li><li>Work with fabrication leads and supervisors to improve production quality and efficiency.</li><li>Monitor recurring defects and implement preventative measures.</li><li>Assist in developing and updating quality control procedures and checklists.</li><li>Promote a culture of quality and continuous improvement throughout the shop.</li></ul>Compliance &amp; Safety<ul><li>Ensure compliance with:</li><li>AWS D1.1 Structural Welding Code &ndash; Steel</li><li>AISC Code of Standard Practice</li><li>Project-specific quality requirements</li><li>OSHA safety standards</li><li>Company quality procedures</li><li>Participate in safety meetings and maintain a safe work environment.</li></ul>QualificationsRequired<ul><li>Minimum 3 years of experience in structural steel fabrication, welding, or quality control.</li><li>Ability to read and interpret structural steel shop drawings and specifications.</li><li>Strong understanding of fabrication processes including:</li><li>Fitting</li><li>Welding</li><li>Cutting</li><li>Drilling</li><li>Assembly</li><li>Knowledge of AWS welding symbols and inspection requirements.</li><li>Proficient with tape measures, calipers, levels, squares, and inspection tools.</li><li>Strong attention to detail and organizational skills.</li><li>Ability to work independently and communicate effectively with production personnel.</li></ul>Preferred<ul><li>AWS Certified Welding Inspector (CWI) certification.</li><li>AISC quality management experience.</li><li>NDT experience (MT, PT, UT, or VT certifications).</li><li>Experience with structural steel, stairs, railings, miscellaneous metals, and heavy industrial fabrication.</li><li>Familiarity with Tekla, SDS/2, FabTrol, Procore, or other fabrication software.</li></ul>Pay: $30.00 - $35.00 per hourBenefits:<ul><li>401(k)</li><li>Dental insurance</li><li>Health insurance</li><li>Vision insurance</li></ul>Application Question(s):<ul><li>3 years experience working as quality control in a steel fabrication shop?</li><li>What qualifies you to be in quality control?</li></ul>Work Location: In person

Quality Control Inspector Steel Fabrication

Subsea7

<div>
 
 What will you be doing?
 
 
 
 <ul>
 <li>
 With minimal supervision, independently evaluate, organize, &amp; prioritize your projects.
 </li>
 <li>
 Review and become familiar with client specifications during Tender and Projects.
 </li>
 <li>
 Provide specialist skills &amp; knowledge in key areas of materials and welding engineering.
 </li>
 <li>
 Produce data sheets for component (forging, pipe, bend, etc) procurement and provide technical oversite of component procurement.
 </li>
 <li>
 Review fabricators submitted Material Test Reports, Welding Procedure Packages and Non-Destructive Testing Procedures in accordance with industry codes, standards &amp; client specifications.
 </li>
 <li>
 Contribute to training &amp; development while innovating solutions.
 
 
 </li>
 </ul>
 
 What experience would we like you to have?
 
 
 
 <ul>
 <li>
 Bachelor of Science degree in Weld Engineering, Metallurgy or Material Science with 7 years&rsquo; practical experience in Weld Engineering.
 </li>
 <li>
 Must have fluent written and verbal communication skills in English
 </li>
 <li>
 Proficient with most common business software tools and packages.
 </li>
 <li>
 Welding and fabrication involving typical subsea material combinations including base materials of carbon steel pipe, forgings, CRAs (including nickel alloys, duplex and super duplex stainless) as well as inlay and overlay cladding of these materials.
 </li>
 <li>
 Subsea fabrication, manufacturing, and welding experience with any of the following; PLET&rsquo;s, PLEM&rsquo;s, jumpers (rigid or flexible), umbilical&rsquo;s and related structures (SUTA, TUTA), manifolds, subsea connection systems, subsea valves, pigging equipment, pull-in heads, suction piles and other subsea foundations.
 </li>
 <li>
 AWS Certified Welding Inspector or Certified Welding Engineer (current or past)
 </li>
 <li>
 NDE Certifications such as ASNT Level II or preferably Level III in multiple NDE methods (current or past)
 </li>
 <li>
 Experience and familiarity with various offshore operator&rsquo;s (majors and independents) materials and welding specifications.
 </li>
 <li>
 Welding of both the pressure containing kit and fabricated steel structures (skids, frames, mudmats, mooring) used in typical subsea structures.
 </li>
 <li>
 Experience with manufacture and testing of line pipe
 </li>
 <li>
 Experience with hot induction bending of pipe
 </li>
 <li>
 Forging and materials processing techniques for controlling mechanical properties.
 </li>
 <li>
 Experience with flanged connections and bolting.
 </li>
 <li>
 Experience with subsea cathodic protection systems, and the material related issues of CP (HIC) in the subsea environment. ##-DDL1
 </li>
 </ul>
</div>

Engineer Level II - Materials/Welding

Bobcat

<div><div><div><div><h2 class="jobSectionHeader">Job Information</h2>
</div><div>
Weld together metal components of products as specified by layout, blueprints, diagrams, work orders, weld procedures or oral instructions, using electric arc-welding equipment or spot welder.

2nd Shift- 4:30pm-3:00am Monday-Thursday (Potential Mandatory OT on Fridays)

Pay Scale: $24.50 + (D.O.E.) + $2.00 Shift Differential</div></div><div><div><h2 class="jobSectionHeader">
Role &amp; Responsibility</h2>
</div><div>
ESSENTIAL FUNCTIONS:
<ul><li>Sets up electrode wire per procedure to prepare welding equipment for operation.</li>
<li>Positions and clamps work pieces together or assemble them in a jig or fixture.</li>
<li>Strikes arc and manually guides electrode or gun along weld line to form specified depth of fusion and bead.</li>
<li>Examines weld for bead size and other specifications.</li>
<li>Cleans or degreases weld joint or work piece using power equipment as needed.</li>
<li>Runs spot welder as needed insuring proper tips are used.</li>
<li>Insure spot welder tacks are secure and uniform without dimpling opposite surface.</li>
<li>Performs duties in a safe, efficient manner in compliance with safety rules and regulations.</li>
<li>Use side grinder to clean up all grinding splatter and insuring quality surfaces near weld zone.</li>
</ul>
OTHER DUTIES:
<ul><li>Keeps work area clean, orderly and maintain 5S schedule.</li>
<li>Required to fill out daily production sheets.</li>
<li>Required to accurately scan and record information in the Oracle inventory system.</li>
<li>Required to correctly identify and label parts for their specific area with correct quantity and location.</li>
<li>Perform quality checks as required.</li>
<li>Assists in the instruction and training of others as requested by supervisor.</li>
<li>Completes preventative maintenance and other duties as directed by Total Production Maintenance.</li>
<li>Perform other non-essential duties as assigned by management.</li>
</ul></div></div><div><div><h2 class="jobSectionHeader">Job Requirement</h2>
</div><div>
Job Requirement
<ul><li>Education Required: High School Diploma/Equivalent</li>
<li>Must be able to follow established methods and procedures and perform work accordingly.</li>
<li>Must have the ability to work rapidly and under time pressure for extended periods of time in order to meet build requirements.</li>
<li>Must possess the ability to read build sheets and blueprints.</li>
<li>Travel Required: &lt; 10%</li>
<li>Strong written and verbal communication skills.</li>
<li>Global Breadth: Single-Site (One Location)</li>
<li>Prerequisite Training Course completed.</li></ul></div></div></div></div>

Welder- Litchfield 2nd Shift

Search 145+ Weld inspector jobs near you this June. New roles added regularly across leading industries. Apply today.