Welder Fabricator, Welders, Cutters, and Welder Fitters

JOB DUTIES: WELDER FABRICATOR, WELDERS, CUTTERS, AND WELDER FITTERS

Welder Fabricator, Welders, Cutters, and Welder Fitters performs numerous activities required in repair, maintenance, and rebuilding of marine boats and barges. Welder Fabricator, Welders, Cutters, and Welder Fitters works 8 plus hour shifts in groups of 1 to 6 people depending upon job requirements and performing welding activities in all positions, climbing ladders and scaffolds, lifting heavy equipment including chain hoists and large wrenches from floor to waist to overhead, swinging 16lb sledgehammers in awkward positions, and performing gripping activities with both hands in utilization of cutting, burning, and welding activities. Welder Fabricator, Welders, Cutters, and Welder Fitters applicants must possess the ability to work in awkward positions and function in a shipyard environment which includes extreme weather temperatures and air pollutants produced with welding, burning, blasting, and painting.

Welder Fabricator, Welders, Cutters, and Welder Fitters Essential Functions:

• Occasional lift/carry propeller wrenches 68 lbs to 120 lbs.
• Occasional lifting/carrying 3 to 5 ton chain falls weighing 60 to 80 lbs 100+ ft.
• Occasional lifting 3 to 5 ton chain falls overhead from a step ladder with the aid of another employee.
• Swinging of 16lb sledge hammer repetitively to tighten and loosen large nuts.
• Crawling on hands and knees 100+ ft.
• Lying on your back on creepers pushing the creeper 100+ ft with working in confined spaces down to 18” in height.
• Climbing in and out of round manholes with inside diameter of 18 inches and work in internally confined spaces.
• Performing work duties in awkward positions for extended lengths of time.
• Pulling chain hoists with repetitive pull down forces of 60 to 80 lbs.
• Traverse gangways and scaffolding at varying heights; negotiate uneven heights between dock and vessel; and negotiate uneven surfaces.
• Frequent standing and walking on awkward, slick, and uneven surfaces.
• Frequent bending, stooping, twisting, kneeling, and working in awkward positions.
• Frequent balancing on uneven surfaces.
• Comprehend blueprints, sketches and templates.
• Manipulate and operate all machines and tools essential to the performance of the position of Welder Fabricator, Welders, Cutters, and Welder Fitters such as:

Sledge Hammer

Welding Leads

Oxygen/Acetylene gauges

Welding Hood

Welding Rods

Cutting Torch

Leaf Break

Welder Gloves

Air Tools

Bench Grinders

Forklift

Socket Sets

Vices

Micrometers

Cherry Picker

Calipers

Hand Tools

Welding Machines

Hand Grinders

Chain Hoist

Come-a-Long

• Maneuver around 30" obstructions and 24" frames;
• Ascend and work at heights of up to 40 feet.

NMRKY, Inc. is an Equal Opportunity Employer

Job Type: Full-time

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance

People with a criminal record are encouraged to apply

Work Location: In person