Qureos Mentor

9K Management Consultancies

Qualifications and desired experience:<ul><li>Good Communication Skills in English</li><li>NVQ Level 3 or equivalent in Light Vehicle Maintenance &amp; Repair, or equivalent Typically, 5 years working on LCVs in dealer, fleet, or workshop environments</li><li>Proven mechanical experience.</li><li>Knowledge of commercial vehicle systems and diagnostic fault finding</li><li>Professional approach to your workload</li><li>Able to carry out repairs efficiently and to a high standard</li><li>Strong record&#8209;keeping, digital literacy (e.g. job card systems), and paperwork skills</li><li>Hard working, team player with excellent communication skills and good attention to detail</li></ul>Duties and Responsibilities<ul><li>Maintain vehicles to manufacture specifications&ensp;&ensp;&ensp;&ensp;</li><li>Diagnose mechanical and electrical faults using advanced diagnostic tools.</li><li>Work will vary from general servicing on cars, vans and minibuses etc to major repairs, engine overhaul and gearbox replacement, as well as tyre fitting and wheel alignments.</li><li>Complete job cards, maintenance records and associated paperwork to a good standard</li><li>Prepare vehicles for PSV/ MOT</li><li>Vehicle breakdown and roadside assistance when required</li><li>Liaise with the team on work progress and report any problems or delays that may occur</li><li>&middot; Ensure all work is completed to a high standard and within agreed timelines</li></ul>Job Type: Full-timePay: AED13,000.00 - AED15,000.00 per monthApplication Question(s):<ul><li>What is your nationality?</li><li>Are you open to being assigned to the Northern Ireland if hired?</li><li>are you in UAE?</li><li>Willing to take UKVI IELTS?</li></ul>Education:<ul><li>High school or equivalent (Preferred)</li></ul>Experience:<ul><li>Vehicle Technician : 3 years (Preferred)</li></ul>Language:<ul><li>English (Preferred)</li></ul>

Vehicle Technician

Key Responsibilities:<ul><li>Development of PLC, HMI and SCADA software for various new and existing projects including liaising with clients to produce a functional design specification (FDS)</li><li>Specify PLC, HMI and Scada Hardware for certain projects</li><li>Production of PLC I/O documents</li><li>Testing of control systems at our workshop prior to dispatch</li><li>On site commissioning and operator training of control systems.</li><li>Site visits to existing control systems for diagnostics/modifications</li><li>Remote access to existing control systems for diagnostics / modifications</li><li>Interpret and understand the requirements of the specification and produce accurate and detailed electrical drawings to allow the workshop team to manufacture and test control panels.</li><li>Assist estimators with any queries associated with Tenders</li><li>Ordering and monitoring materials ensuring a suitable balance between quality and price is maintained and ensure wastage is minimal.</li><li>Provide technical guidance for various projects/customers.</li><li>Liaising with customers. Understand their needs and manage expectations. Provide them with regular updates as required. This includes developing and maintaining excellent customer relationships as well as dealing with any problems they may encounter, scheduling, pricing, component type etc.</li><li>Provision of guidance to workshop team when necessary to answer any queries and ensure control panels are manufactured to a high standard.</li><li>Ensure compliance throughout all projects with relevant specifications, standards, environmental, quality and Identify potential or actual sources of problems and develop and implement appropriate solutions.</li><li>Meet regularly with the workshop supervisor, manager and Managing Director to ensure effective communication of information relative to work in progress and job scheduling.</li><li>Ensuring projects are completed on time, on budget and in a satisfactory condition.</li><li>Utilise effective time management and planning skills to ensure customer needs and deadlines are met and company objectives achieved.</li><li>Responsible for accurately closing down jobs, filling in job and timesheets with details of all materials used and hours worked in a timely manner and reporting all unresolved faults experienced.</li><li>On occasion resolve any issues on site, identify potential sources of technical problems and develop and implement effective solutions.</li><li>Prepare written reports for clients as required.</li><li>Provide the Managing Director with project reports and other information required to inform future business direction.</li><li>Ensure all necessary documentation is completed and issued with finished control panels and all company documents are maintained and filed appropriately.</li><li>Site work which will require extensive travel and also working in various locations and varied environments worldwide.</li><li>On occasion carrying out electrical installation and repair work on a range of projects at our customer sites.</li><li>On occasion carrying our breakdowns/fault finding as and when required which may be outside of normal working hours.</li><li>Maintain all tools/equipment etc. in a clean, tidy and safe working condition and report any faults to workshop supervisor.</li><li>Maintain all company facilities in a clean, tidy and safe working condition, segregating waste appropriately</li><li>Any other duties, within reason and capability, as determined by the Managing Director.</li><li>Compliance with AW Control Systems Ltd policies and procedures.</li><li>100% commitment and dedication is expected at all times.</li></ul>Job Type: Full-timePay: AED22,000.00 - AED35,000.00 per monthApplication Question(s):<ul><li>What is your nationality?</li><li>Are you open to being assigned to the Northern Ireland if hired?</li><li>are you in UAE?</li><li>Willing to take UKVI IELTS?</li><li>Are you familiar of PLC/HMI software development?</li></ul>Education:<ul><li>Diploma (Preferred)</li></ul>Experience:<ul><li>Software Engineer: 3 years (Preferred)</li></ul>Language:<ul><li>English (Preferred)</li></ul>

Software Engineer

Key Responsibilities:<ul><li>Must have 5-10 year experience in same position</li><li>As a key member of the AW team, contribute to the development of the short, medium and long term business strategies for the company.</li><li>Assist with management of electrical design team to ensure efficient output levels, deadlines are met, and standards are kept to the highest possible standard.</li><li>Support the Technical Director in reviewing electrical drawings and providing peer support and training across the wider electrical design team.</li><li>Assist in maintaining a detailed schedule of projects which are delegated appropriately according to skill level.</li><li>Assist the Sales Team in providing technical feedback and solutions including an element of project pricing for potential projects.</li><li>Liaising with customers. Understand their needs and manage expectations. Provide them with regular updates as required. This includes developing and maintaining excellent customer relationships, as well as dealing with any problems they may encounter, scheduling, component type etc.</li><li>Interpret and understand the requirements of the specification and design electrical drawings to allow the workshop team to manufacture and test control panels that meet the requirements of the customer.</li><li>Assist with resolving any technical issues across the business, identify potential sources of problems and develop and implement effective solutions.</li><li>Assist with after sales queries and technical issues, investigate customer complaints and ensure they are dealt with to customer&rsquo;s satisfaction.</li><li>Liaise closely with the senior management team to ensure effective communication of information relative to work in progress and job scheduling.</li><li>Monitoring material and component usage ensuring a suitable balance between quality and price is maintained.</li><li>On occasion, should the requirement arise, Control panel modification, fault finding and commissioning at customer sites.</li><li>Ensure all necessary documentation is completed and issued with finished control panels and all company documents are maintained and filed appropriately.</li><li>Making technical presentations and demonstrating how a product will meet client&rsquo;s needs.</li><li>Ensure compliance throughout all projects with relevant specifications, standards, environmental, quality and health and safety regulations.</li><li>Help ensure projects are completed on time, on budget and in a satisfactory condition by regularly reviewing job progress and costs to identify any variances to budget; re-cost as required.</li><li>Continued training and mentoring of more junior / inexperienced members of the team.</li><li>Prepare written reports for clients as required.</li><li>Any other duties, within reason and capability, as determined by the Directors</li></ul>Job Type: Full-timePay: AED22,000.00 - AED35,000.00 per monthApplication Question(s):<ul><li>What is your nationality?</li><li>Are you open to being assigned to the Northern Ireland if hired?</li><li>are you in UAE?</li><li>Willing to take UKVI IELTS?</li></ul>Education:<ul><li>Diploma (Preferred)</li></ul>Experience:<ul><li>Senior Electrical Design Engineer: 5 years (Preferred)</li></ul>Language:<ul><li>English (Preferred)</li></ul>

Senior Electrical Design Engineer

Join 9K Management Consultancies and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

9K Management Consultancies

ABOUT_COMPANY

Vehicle Technician

Software Engineer

Senior Electrical Design Engineer