Qureos Mentor

Al Jaber & Partners

The Senior Technical Engineer plays a critical role in supporting project delivery through technical expertise, design coordination, method statements, and engineering solutions. They act as a bridge between the design/consultant team, project management, and site execution teams, ensuring that technical aspects of construction align with client specifications, codes, and standards.Key ResponsibilitiesTechnical &amp; Design CoordinationReview project designs, IFC (Issued for Construction) drawings, and specifications to identify discrepancies, clashes, and constructability issues.Provide technical solutions and alternatives to optimize cost, time, and quality.Prepare and review shop drawings, method statements, and material submittals for consultant approval.Coordinate with consultants, subcontractors, and suppliers on technical issues.Site SupportSupport site teams by resolving technical queries and ensuring work execution aligns with approved drawings and specifications.Conduct site inspections to verify compliance with approved technical documents.Lead troubleshooting for unforeseen technical challenges during construction.Project Controls &amp; DocumentationEnsure engineering documents are up to date and systematically archived.Prepare technical reports, compliance checklists, and progress updates for management and clients.Support project managers in tendering, estimation, and technical evaluations when needed.Leadership &amp; MentoringGuide junior engineers and draftsmen in preparing drawings, calculations, and submittals.Conduct technical workshops or sessions to maintain knowledge sharing within the engineering team.Qualifications &amp; SkillsEducation: Bachelor&rsquo;s degree in Civil, Mechanical, Electrical, or related Engineering discipline (Master&rsquo;s preferred for specialized fields).Experience: 7&ndash;12 years of experience in construction/engineering projects, preferably in infrastructure, utilities, oil &amp; gas, or heavy civil works.Technical Knowledge:Strong command of international codes &amp; standards (BS, ASTM, ACI, ASME, etc.).Proficiency in CAD, BIM, and relevant engineering software.Familiarity with project planning tools (Primavera/MS Project) is a plus.Soft Skills: Strong analytical skills, attention to detail, leadership, communication, and client-facing abilities.Certifications: PMP, Chartered Engineer, or equivalent certifications are an advantage.Job Type: Full-time

Senior Technical Engineer

Key Responsibilities<ul><li>Cost Estimation &amp; Budgeting</li><li>Prepare detailed cost estimates, BOQs, and tender documents for roads and utilities projects.</li><li>Evaluate technical and commercial aspects of bids and provide recommendations.</li><li>Assist in developing project budgets and cost control measures.</li><li>Contracts &amp; Procurement</li><li>Administer contracts, subcontracts, and purchase agreements in line with FIDIC and company standards.</li><li>Evaluate subcontractor quotations and recommend awards.</li><li>Prepare and review variation orders, claims, and contractual correspondences.</li><li>Measurement &amp; Valuation</li><li>Conduct accurate quantity take-offs for roads, drainage, sewerage, potable water, and utility networks.</li><li>Validate contractor progress claims and recommend payment certificates.</li><li>Ensure proper cost allocation against completed works.</li><li>Commercial &amp; Financial Control</li><li>Monitor project costs versus budget and highlight potential overruns.</li><li>Conduct value engineering and cost-saving analyses.</li><li>Prepare monthly commercial reports, cash flow forecasts, and financial updates.</li><li>Claims &amp; Dispute Resolution</li><li>Support preparation and defense of contractual claims, EOTs, and variations.</li><li>Maintain documentation for dispute resolution and arbitration if required.</li><li>Coordination &amp; Reporting</li><li>Liaise with project teams, consultants, and clients on commercial issues.</li><li>Attend progress and commercial meetings.</li><li>Provide training and guidance to junior QS staff.</li></ul>Qualifications &amp; Skills<ul><li>Bachelor&rsquo;s Degree in Quantity Surveying / Civil Engineering or equivalent.</li><li>Professional certifications preferred (RICS / MRICS or equivalent).</li><li>Minimum 10 years&rsquo; experience, with at least 5 years in Roads &amp; Utilities projects.</li><li>Strong knowledge of FIDIC contracts, tendering, and claims management.</li><li>Proficiency in CostX, Candy, Excel, and other QS software tools.</li><li>Excellent analytical, negotiation, and communication skills.</li><li>Ability to work independently and handle multiple projects under tight deadlines.</li></ul>Job Type: Full-time

Senior Quantity Surveyor (Roads & Utilities)

Key Responsibilities:&middot; Implement and monitor the project&rsquo;s Health, Safety &amp; Environment (HSE) policies, procedures, and guidelines in compliance with local regulations and international standards (e.g., OSHA, ISO 45001, NEBOSH).&middot; Conduct daily site inspections to ensure safe working practices during roadworks, excavation, backfilling, utility (wet &amp; dry) installation, and structural activities.&middot; Identify potential hazards, unsafe conditions, and unsafe acts; recommend corrective and preventive actions.&middot; Ensure all workers and subcontractors comply with PPE requirements and safety protocols.&middot; Assist in preparing and delivering HSE inductions, toolbox talks, and safety awareness training for site staff and labor.&middot; Review method statements, risk assessments (RAMS), and permits to work to ensure safety compliance before execution.&middot; Maintain accident/incident registers and prepare investigation reports with root cause analysis and corrective actions.&middot; Monitor lifting operations, confined space entries, hot works, road diversions, and work near live utilities.&middot; Ensure compliance with traffic safety, signage, barricading, and public protection measures in road and infrastructure works.&middot; Liaise with consultants, clients, and local authorities regarding HSE compliance and audits.&middot; Maintain up-to-date HSE documentation, reports, and records for submission and project handover.Qualifications &amp; Skills:&middot; Diploma/Bachelor&rsquo;s degree in Occupational Health &amp; Safety, Environmental Science, or Civil Engineering (preferred).&middot; Minimum 8 years&rsquo; experience as a Safety Officer in infrastructure, road, and utility (wet &amp; dry) projects.&middot; Certifications such as NEBOSH IGC, IOSH, OSHA, or equivalent are mandatory.&middot; Strong knowledge of construction HSE regulations, standards, and best practices.&middot; Good communication, reporting, and leadership skills with ability to influence safe behaviors.&middot; Ability to work under pressure and manage multiple site activities simultaneously.Preferred:&middot; Experience with GCC infrastructure/road authority projects (e.g. RTA, ADM, etc. depending on project location).&middot; First Aid &amp; Fire Warden certification.&middot; Multilingual communication skillJob Type: Full-time

HSE Engineer

Key Responsibilities<ul><li>Drawing &amp; Drafting</li><li>Prepare 2D and 3D drawings using AutoCAD or relevant drafting software based on project requirements.</li><li>Convert conceptual sketches and designs into detailed shop drawings and as-built drawings.</li><li>Ensure all drawings are in compliance with project specifications, codes, and standards.</li><li>Coordination</li><li>Work closely with engineers, architects, and project teams to develop accurate technical drawings.</li><li>Coordinate with site teams to resolve drawing discrepancies and provide updated drawings as required.</li><li>Assist in preparing detailed drawings for approvals and submittals.</li><li>Documentation &amp; Control</li><li>Maintain and update drawing registers and filing systems for easy retrieval.</li><li>Ensure version control of drawings and issue revised drawings promptly.</li><li>Support the preparation of As-Built Drawings for final project handover.</li><li>Technical Support</li><li>Provide drafting support to the engineering and construction teams throughout the project lifecycle.</li><li>Review and update drawings in response to site instructions and variations.</li></ul>Qualifications &amp; Skills<ul><li>Diploma or Technical Certification in Drafting / Engineering / Architecture.</li><li>Minimum 3 &ndash; 5 years of experience as a Draftsman in construction, infrastructure, or fit-out projects.</li><li>Proficiency in AutoCAD, Revit, or other relevant CAD software.</li><li>Strong knowledge of engineering drawings, detailing, and technical standards.</li><li>Ability to prepare shop drawings, coordination drawings, and as-built drawings.</li><li>Good communication and coordination skills.</li><li>Attention to detail and ability to work under tight deadlines.</li></ul>Job Type: Full-time

Draftsman - AutoCAD Operator

Join Al Jaber & Partners and explore 4   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

Al Jaber & Partners

ABOUT_COMPANY

Senior Technical Engineer

Senior Quantity Surveyor (Roads & Utilities)

HSE Engineer

Draftsman - AutoCAD Operator