Qureos Mentor

ARYA PETROLEUM FZE

Qualification: B. E. Mechanical / Chemical Engineering or equivalentExperience: 3-4 YearsField of Experience: EPC/Petrochemicals/RefineryJob Description:<ul><li>Collaborate with planners/schedulers to develop and update project schedules using Primavera P6 or MS Project.</li><li>Identify critical paths, resource bottlenecks, and potential delays.</li><li>Integrate cost and schedule data to enable comprehensive progress tracking and forecasting.</li><li>Support project risk analysis and mitigation planning.</li><li>&middot; Manage the entire lifecycle of project documents (engineering drawings, vendor documents, correspondence, etc.).</li><li>Implement and maintain document control procedures and systems in accordance with project/client requirements.</li><li>Assign document numbers, manage transmittals, and maintain master document registers (MDR).</li><li>Distribute documents to internal stakeholders and external parties as per distribution matrix.</li><li>Ensure that as-built drawings, RFIs, MOMs, and technical submittals are logged, tracked, and archived properly.</li><li>Coordinate with engineering, procurement, construction, and subcontractors for timely document submissions.</li><li>Use electronic document management systems (EDMS) such as Aconex, SharePoint, or Documentum.</li><li>Interface with engineering, procurement, construction, and finance teams to ensure integrated project control.</li><li>Attend project review meetings, prepare presentation materials, and provide updates on project status.</li><li>Support audits and project close-out activities, including final documentation and reporting.</li></ul>Job Type: Full-timePay: AED4,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>EPC/Petrochemicals/Refinery: 3 years (Preferred)</li></ul>

Project Controller

Qualification: B. E. Chemical EngineeringExperience: 4-5 YearsField of Experience: EPC/PetrochemicalsJob Description:<ul><li>Develop Process Flow Diagrams (PFDs), Piping &amp; Instrumentation Diagrams (P&amp;IDs), Heat &amp; Material Balances (HMB), and Process Data Sheets.</li><li>Perform process simulations using software such as Aspen HYSYS, Aspen Plus, ProMax, or similar.</li><li>Prepare line sizing calculations, equipment sizing (pumps, compressors, heat exchangers, separators, etc.).</li><li>Design and evaluate process control strategies and safety systems, including cause &amp; effect diagrams, control narratives, and alarm management.</li><li>Participate in FEED and detailed engineering phases of oil &amp; gas projects (upstream, midstream, downstream, WWTP, etc.).</li><li>Develop technical documents such as process descriptions, design basis, operating manuals, and utility balances.</li><li>Perform hydraulic calculations, relief valve sizing, and flare system design.</li><li>Support Process Safety activities including HAZOP, HAZID, SIL studies, and QRA (Quantitative Risk Assessments).</li><li>Integrate environmental and sustainability considerations into process design.</li><li>Coordinate with other engineering disciplines (mechanical, piping, instrumentation, civil, etc.) to ensure seamless integration of process design.</li><li>Support procurement by reviewing vendor documents and providing technical evaluations.</li><li>Provide technical support during construction, pre-commissioning, commissioning, and start-up.</li></ul>Job Type: Full-timePay: AED4,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>EPC/Petrochemicals: 4 years (Preferred)</li></ul>

Process Engineer

Qualification: B. E. Mechanical EngineeringExperience: 3-4 YearsField of Experience: EPC/Petrochemicals/RefineryJob Description:<ul><li>Design and review GA (General Arrangement) drawings, isometric drawings, equipment layout drawings, and as-built drawings using AutoCAD and PDMS (or E3D).</li><li>Develop mechanical datasheets, fabrication drawings, and bill of materials for static and rotating equipment.</li><li>Perform equipment selection and sizing calculations (pumps, compressors, pressure vessels, heat exchangers, tanks, etc.).</li><li>Ensure mechanical design complies with industry standards (API, ASME, TEMA, ISO, etc.).</li><li>Use AutoCAD to produce 2D mechanical layouts, fabrication, and modification drawings.</li><li>Utilize PDMS (or E3D) for 3D modeling of mechanical equipment and piping interfaces.</li><li>Interpret and create isometric drawings for piping and mechanical systems.</li><li>Prepare and update as-built drawings based on redlines from site during and after construction phases.</li><li>Conduct site visits and field surveys to verify equipment locations, tie-ins, and existing conditions.</li><li>Coordinate with construction teams to resolve field queries (RFIs) and update designs accordingly.</li><li>Participate in equipment installation, alignment, hydrotesting, punch listing, and mechanical completion activities.</li><li>Support pre-commissioning and commissioning phases by providing technical guidance and on-site troubleshooting.</li><li>Interface with multidisciplinary teams (piping, process, electrical, instrumentation, civil) for integrated project execution.</li><li>Support procurement by preparing material requisitions, reviewing vendor drawings, and attending FATs.</li><li>Monitor project schedules and ensure timely delivery of mechanical deliverables.</li><li>Participate in 3D model reviews, HAZOPs, constructability, and design optimization meetings.</li></ul>Job Type: Full-timePay: AED4,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>EPC/Petrochemicals/Refinery: 3 years (Preferred)</li></ul>

Mechanical Engineer

Qualification: B. E. Electronics and Instrumentation EngineeringExperience: 4-5 YearsField of Experience: EPC/PetrochemicalsJob Description:<ul><li>Develop and review instrumentation design documents (e.g., Instrument Index, I/O List, Data Sheets, Loop Diagrams, Hook-up Drawings, Wiring Diagrams).</li><li>Prepare instrument specifications and datasheets for field instruments (flow, pressure, temperature, level, analysers, etc.).</li><li>Select appropriate instrumentation based on process requirements and environmental conditions.</li><li>Design control and shutdown systems, including ESD (Emergency Shutdown), F&amp;G (Fire &amp; Gas), and PLC/DCS interfaces.</li><li>Participate in FEED (Front End Engineering Design) and detailed engineering phases.</li><li>Ensure compliance with international standards (IEC, ISA, API), project specifications, and client requirements.</li><li>Prepare and review technical bid evaluations and assist procurement in vendor selection.</li><li>Coordinate with vendors for technical clarification, FAT (Factory Acceptance Test), and document review.</li><li>Work closely with process, electrical, mechanical, piping, and civil teams to ensure instrumentation requirements are fully integrated.</li><li>Support construction teams with field engineering, installation methods, and troubleshooting.</li><li>Participate in commissioning, loop checking, and prestart-up activities.</li><li>Prepare engineering deliverables as per project schedule and quality standards.</li><li>Ensure all instrumentation documentation is up-to-date and properly archived.</li><li>Participate in HAZOP, SIL, and risk assessments when required.</li></ul>Job Type: Full-timePay: AED4,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>EPC/Petrochemicals: 4 years (Preferred)</li></ul>

Instrumentation Engineer

Join ARYA PETROLEUM FZE and explore 4   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

ARYA PETROLEUM FZE

ABOUT_COMPANY

Project Controller

Process Engineer

Mechanical Engineer

Instrumentation Engineer