Qureos Mentor

EIWAA Oil and Gas Services LLC

Job Overview We are looking for a motivated Hydro Testing &amp; Maintenance Technician with solid experience in mechanical/electrical testing and maintenance. This role involves working on pressure systems, valves, and electrical safety checks, ensuring compliance with industry standards and client requirements. Candidates with transferable skills in mechanical maintenance, QA/QC, or testing are encouraged to apply.Key Responsibilities<ul><li>Perform hydrostatic and pneumatic pressure tests using gauges and chart recorders.</li><li>Support pipe isolation and freezing operations during maintenance.</li><li>Carry out valve servicing, overhauling, and calibration (including PRVs).</li><li>Conduct Portable Appliance Testing (PAT) for electrical safety compliance.</li><li>Perform Earth Pit Testing and Megger Testing for grounding and insulation.</li><li>Prepare and maintain accurate test records, calibration certificates, and reports.</li><li>Work closely with engineers and QA/QC teams for approvals and documentation.</li><li>Follow strict safety protocols and ensure compliance with client specifications.</li></ul>Qualifications &amp; Skills<ul><li>3&ndash;6 years of experience in mechanical/electrical testing, maintenance, or QA/QC.</li><li>Knowledge of pressure testing procedures, safety standards, and test equipment.</li><li>Ability to read technical drawings and test plans.</li><li>Certification in PAT, PRV calibration, or related testing methods is an advantage.</li><li>Strong attention to detail, documentation accuracy, and teamwork skills.</li><li>Candidates with mechanical/electrical maintenance backgrounds are welcome.</li></ul>Job Type: Full-time

Hydro Testing & Maintenance Technician (Mechanical/Electrical)

Experience: Min.3 Years.Qualification: ISO 18436-2 Category II &ndash; Vibration Analyst from a recognized centerJob Duties and Responsibilities:&middot;Conduct routine and scheduled vibration data collection on rotating equipment (motors, pumps, compressors, generators, turbines, fans, gearboxes, etc.).&middot;Perform detailed vibration analysis to detect imbalance, misalignment, bearing faults, looseness, resonance, and other mechanical defects.&middot;Use vibration analyzers, data collectors, and condition monitoring software to interpret results and trend machine condition.&middot;Ability to collect vibration data using portable data collectors, analyzers, and online monitoring systems.&middot;Familiar with FFT spectrum analysis, time waveform, phase analysis, orbit plots, waterfall plots, and trending.&middot;Knowledge of diagnosing machine faults: imbalance, misalignment, bearing defects, looseness, resonance, gear faults, electrical faults in motors, lubrication issues, etc.&middot;Prepare diagnostic reports with recommendations for corrective actions.&middot;Carry out precision laser shaft alignment, dial-gauge alignment, belt alignment, and coupling alignment at site.&middot;Assess soft foot, thermal growth, and base conditions prior to alignment.&middot;Perform in-situ alignment of pumps, motors, generators, compressors, and other rotating machinery without dismantling system.&middot;Strong understanding of pumps, motors, compressors, turbines, fans, gearboxes, generators, and other dynamic equipment.&middot;Knowledge of shaft alignment, balancing, bearing types, lubrication practices, and machine installation standards.&middot;Coordinate with maintenance teams for corrective adjustments, shimming, and equipment re-leveling.&middot;Conduct thermal scanning of electrical panels, MCCs, switchgear, breakers, bus bars, transformers, motors, bearings, and mechanical systems.&middot;Perform workplace and environmental noise monitoring in compliance with OSHA, ISO 9612, and local regulatory guidelines.&middot;Measure sound levels of machinery, equipment, HVAC systems, and industrial environments.&middot;Maintain sound level meters and ensure test instruments meet calibration requirements.&middot;Prepare technical reports, inspection certificates, and condition monitoring summaries.Job Type: Full-time

Condition Monitoring Technician (Vibration, Noise and Thermography)

Duties:<ul><li>3D Laser Scan Registration (Target-based &amp; Targetless)</li></ul><ul><li>Point Cloud Cleaning, Optimization &amp; Quality Control</li></ul><ul><li>Georeferencing of Point Clouds using Total Station / GNSS Control Points</li></ul><ul><li>Coordinate System Management &amp; Alignment (Local to Project Coordinates)</li></ul><ul><li>Scan-to-Scan and Scan-to-Model Accuracy Verification</li></ul><ul><li>Deliverables Preparation: Registered Point Clouds, QA/QC Reports, Registration Logs</li></ul><ul><li>Collaboration with Design, BIM and Modeling Teams for Accurate Data Handover</li></ul>Experience:4+ years of experience in 3D laser scanning, registration, alignment and georeferencing for industrial, retrofit, infrastructure and construction projects.Proficient in:<ul><li>FARO Scene</li></ul><ul><li>Trimble RealWorks</li></ul><ul><li>Autodesk ReCap</li></ul><ul><li>Leica Cyclone (optional)</li></ul><ul><li>Total Station workflows (Leica)</li></ul><ul><li>Control point creation, transformation, and accuracy reporting</li></ul>Job Type: Full-time

3D Laser Scan Data Registration & Georeferencing Engineer

Join EIWAA Oil and Gas Services LLC and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

EIWAA Oil and Gas Services LLC

ABOUT_COMPANY

Hydro Testing & Maintenance Technician (Mechanical/Electrical)

Condition Monitoring Technician (Vibration, Noise and Thermography)

3D Laser Scan Data Registration & Georeferencing Engineer