Qureos Mentor

GETP Group

<div><div>Project Engineer Mechanical - Oil &amp; Gas<br>
<br>
<b>Mechanical &amp; Pipeline Services (Oil &amp; Gas):</b></div><ul><li>
Mechanical services including mechanical contracting and maintenance.</li><li>
Supply, installation, testing &amp; maintenance of heavy equipment and pipelines for <b>oil, gas &amp; chilled water systems</b>.</li><li>
GRP &amp; HDPE pipeline services (installation/maintenance).</li><li>
Mechanical support services (long-term hire &amp; on-call) for plant operations.</li><li>
Fabrication &amp; erection of steel structures related to mechanical works.</li><li>
ASME-certified fabrication and NDT support for pipeline projects.</li><li>
Fire protection systems and fire-fighting installations.</li><li>
Relevant for mechanical design, field engineering, erection supervision, and maintenance coordination.</li></ul><div></div><div><b><br>
LPG/NG Utility Systems &amp; Services:</b></div><ul><li>
Engineering, supply, installation and maintenance of LPG/NG/SNG systems.</li><li>
Central gas systems and related pressure reducing &amp; metering stations.</li><li>
Operations &amp; maintenance of gas distribution networks.</li><li>
Aligns with gas network piping, pressure systems, and utility engineering disciplines.</li></ul><div></div><div><b><br>
Industrial &amp; Facility Services:</b></div><ul><li>
HVAC systems supply, installation &amp; commissioning.</li><li>
Fire alarm/firefighting systems installation.</li><li>
Mechanical maintenance works across industrial facilities.</li><li>
Supports roles involving HVAC mechanical design and facility services coordination.</li></ul><div></div><div><b><br>
Ongoing Maintenance &amp; Contracts:</b></div><ul><li>
Long-term operation &amp; maintenance for oil &amp; gas plants (e.g., refinery and field operations).</li><li>
Call-off maintenance contracts at Qatar Petroleum, Q-Chem and other industrial clients.</li><li>
Good match for mechanical reliability, breakdown support and field problem-solving.</li></ul><div><br>
<b>
Education Requirements:</b></div><ul><li>
Bachelor&rsquo;s Degree in Mechanical Engineering (Mandatory)</li><li>
Master&rsquo;s Degree in Mechanical Engineering (Preferred but not mandatory)</li><li>
UPDA/MMUP Grade A or B certification (Highly preferred for Qatar projects)</li></ul><div><br>
<b>
Experience Requirements:</b></div><ul><li><b>
Minimum 12&ndash;15 years total experience</b> in Oil &amp; Gas / Industrial projects</li><li><b>
At least 5&ndash;7 years in Qatar or GCC</b> (mandatory for client familiarity)</li><li><b>
Strong experience in:</b><ul><li>
Pipeline installation (CS, SS, GRP, HDPE).</li><li>
LPG/NG/SNG systems &amp; gas distribution networks.</li><li>
Mechanical equipment installation (pumps, vessels, compressors).</li><li>
HVAC &amp; Fire Fighting mechanical systems.</li><li>
ASME fabrication &amp; erection supervision.</li><li>
Plant maintenance/shutdown / call-off contracts.</li></ul></li><li><b>
Experience working with major clients such as:</b><ul><li>
QatarEnergy / QP.</li><li>
Q-Chem.</li><li>
RasGas / Qatargas.</li><li>
ORYX GTL.<br>
 (Client exposure is highly preferred for approval processes).</li></ul></li></ul></div>

Project Engineer (Mechanical - Oil & Gas)

<div><div><b>Job Title: Motor Testing &amp; Service Engineer.</b></div><div><b>
Job Location: Qatar.</b></div><div><b>
Reports To: Maintenance Supervisor.</b></div><div><b>
Job Type: Full-Time.</b></div><div></div><div><b><br>
Job Title: </b>Motor Testing &amp; Service Engineer.<br>
</div><div><b>
Job Summary:</b><br>
</div><div>
The Motor Testing &amp; Service Engineer is responsible for installation, testing, commissioning, troubleshooting, servicing, and maintenance of electric motors and associated equipment. The role ensures reliable, safe, and efficient operation of motors in compliance with IEC / IEEE standards and customer requirements, both in the workshop and at site.<br>
</div><div><b>
Key Responsibilities:</b></div><div></div><div><b><br>
Motor Testing &amp; Diagnostics:</b></div><ul><li>
Perform routine and advanced electrical testing of LV and MV motors, including:<ul><li>
Insulation Resistance (IR) &amp; Polarization Index (PI).</li><li>
High Voltage (HV / AC &amp; DC) testing.</li><li>
Tan Delta / Dielectric Loss Angle testing.</li><li>
Partial Discharge (PD) testing and analysis.</li><li>
Surge comparison testing.</li><li>
Winding resistance, continuity, and phase balance checks.</li></ul></li><li>
Conduct no-load and load testing as per applicable standards.</li><li>
Interpret test results, identify insulation deterioration, and recommend corrective actions.</li><li>
Prepare detailed test reports, analysis summaries, and test certificates.</li></ul><div><br>
<b>
Installation &amp; Commissioning:</b></div><ul><li>
Supervise and execute installation of electric motors at site and workshop.</li><li>
Verify foundation, grouting, alignment (soft foot, laser alignment), and mounting conditions.</li><li>
Coordinate mechanical and electrical installation activities with contractors and clients.</li><li>
Support cable termination, earthing, and pre‑commissioning checks.</li><li>
Perform final commissioning, trial runs, and handover documentation.</li></ul><div><br>
<b>
Service, Maintenance &amp; Troubleshooting:</b></div><ul><li>
Diagnose and rectify electrical and mechanical faults in motors and drives.</li><li>
Carry out preventive and corrective maintenance.</li><li>
Perform dismantling, inspection, reassembly, bearing replacement, and alignment.</li><li>
Support motor overhauling and rewinding inspections.</li></ul><div><br>
<b>
Field Service &amp; Customer Support:</b></div><ul><li>
Attend breakdowns, shutdowns, and emergency service calls.</li><li>
Commission new or overhauled motors at customer sites.</li><li>
Communicate test findings, repair scope, and recommendations to customers.</li><li>
Ensure adherence to agreed timelines and quality expectations.</li></ul><div><br>
<b>
Documentation &amp; Compliance:</b></div><ul><li>
Maintain accurate service reports, test records, installation checklists, and commissioning documents.</li><li>
Ensure compliance with HSE requirements, permit systems, and company policies.</li><li>
Follow IEC / IEEE standards and client‑specific technical specifications.</li></ul><div><br>
<b>
Collaboration &amp; Continuous Improvement:</b></div><ul><li>
Coordinate with engineering, service, QA/QC, and project teams.</li><li>
Assist in root cause analysis of motor failures.</li><li>
Stay updated with modern motor testing technologies and diagnostic methods.</li></ul><div><br>
<b>
Qualifications &amp; Experience:</b></div><div><br>
<b>
Education:</b></div><ul><li>
Diploma or Bachelor&rsquo;s degree in Electrical Engineering or equivalent.</li></ul><div><br>
<b>
Experience:</b></div><ul><li>
3-5 years of hands‑on experience in motor testing, servicing, installation, and commissioning.</li><li>
Experience with LV and MV motors is preferred.</li></ul><div><br>
<b>
Technical Skills:</b></div><ul><li><b>
Strong knowledge of:</b><ul><li>
Induction, synchronous, DC, and VFD‑driven motors.</li><li>
Advanced diagnostic testing (Tan Delta &amp; Partial Discharge).</li><li>
Testing instruments: Megger, HV test sets, PD analyzers, surge testers, vibration analyzers.</li><li>
Electrical drawings and schematics.</li></ul></li><li>
Familiar with IEC / IEEE testing and installation standards.</li></ul><div><br>
<b>
Soft Skills:</b></div><ul><li>
Strong analytical and troubleshooting skills.</li><li>
Clear communication and customer‑handling ability.</li><li>
Ability to work independently and at remote sites.</li><li>
Willingness to travel and work during shutdowns as required.</li></ul><div><br>
<b>
Health, Safety &amp; Environment (HSE):</b></div><ul><li>
Strict compliance with safety procedures, risk assessments, and work permits.</li><li>
Ensure proper use of PPE during testing, installation, and service activities.</li><li>
Promote safe working practices at site and workshop.</li></ul></div>

Motor Testing & Service Engineer

<div><div><b>Cost &amp; Planning Engineer &ndash; Oil &amp; Gas / EPC Projects</b><br>
</div><div><b>
Key Responsibilities:</b></div><ul><li>
Develop and maintain <b>integrated project cost and schedule control systems</b> for EPC and Oil &amp; Gas projects from initiation to close-out.</li><li>
Prepare <b>project budgets, cost forecasts, and variance analyses</b>, ensuring alignment with project scope, schedule, and contractual requirements.</li><li>
Monitor <b>project progress using Earned Value Management (EVM)</b> techniques to track cost and schedule performance.</li><li>
Review and validate <b>contractor invoices, variations, and claims</b>, ensuring compliance with contract terms and approved budgets.</li><li>
Develop and maintain <b>Cost Breakdown Structures (CBS)</b> and support <b>Work Breakdown Structures (WBS)</b> for effective cost and planning control.</li><li>
Support <b>project planning activities</b>, including schedule development, baseline preparation, and progress monitoring using industry-standard tools (e.g., Primavera P6).</li><li>
Identify <b>cost risks, trends, and potential overruns</b>, and recommend mitigation strategies to maintain project financial health.</li><li>
Coordinate with <b>engineering, procurement, construction, and project management teams</b> to ensure accurate cost and schedule integration across EPC phases.</li><li>
Prepare <b>monthly project control reports and dashboards</b>, providing clear visibility of cost performance, forecasts, and key project metrics to management.</li><li>
Ensure compliance with <b>company cost control procedures, project controls standards, and Oil &amp; Gas industry best practices</b>.</li></ul><div><br>
<b>
Key Skills &amp; Competencies:</b></div><ul><li>
Project Controls in <b>Oil &amp; Gas and EPC Projects</b></li><li>
Cost Estimation, Budgeting &amp; Forecasting</li><li><b>
Earned Value Management (EVM)</b></li><li>
Cost &amp; Schedule Integration</li><li>
Contract &amp; Change Management</li><li>
Risk &amp; Variance Analysis</li><li>
Primavera P6 / MS Project</li><li>
Advanced Excel &amp; Reporting Dashboards</li></ul><div><br>
<b>
Experience Requirements:</b></div><ul><li><b>
8&ndash;12 years of experience</b> in Cost Control, Planning, or Project Controls roles.</li><li>
Proven experience in <b>Oil &amp; Gas, EPC, or large infrastructure projects</b> is strongly preferred.</li><li>
Familiarity with <b>full EPC project lifecycle</b> (Engineering, Procurement, Construction).</li></ul></div>

Cost & Planning Engineer - Oil & Gas / EPC Projects

Join GETP Group and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

GETP Group

About Company

Project Engineer (Mechanical - Oil & Gas)

Motor Testing & Service Engineer

Cost & Planning Engineer - Oil & Gas / EPC Projects