Qureos Mentor

INNOVATIVE CONSULTING & MANAGEMENT

<div>Description:

Innovative Consulting &amp; Management Services (ICMS) is a Professional &amp; Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients.
ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is about teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it&rsquo;s about delivering on our commitments.
The purpose of this position is to provide aircraft maintenance services to the U.S. Department of Homeland Security (DHS), U.S. Coast Guard (USCG), Aviation Logistics Center (ALC) for the Short-Range Recovery (SRR) Division. To ensure that aircraft remain in top condition, ALC currently completes program depot maintenance (PDM) (described as a total overhaul of an airframe) every four (4) years on each of the USCG&rsquo;s aircraft. During this time, the aircraft are completely disassembled, cleaned, repaired, repainted and built back up before returning to the fleet. ALC may also complete overhauls and repairs for various other Government aircraft and components. In support of the USCG&rsquo;s PDM program, the USCG requires Aircraft Maintenance Services (AMS) to perform the disassembly, maintenance, repair, inspections, evaluations of sheet metal and composite structures, electrical and electrical components, avionics and avionics components, dynamic components, landing gear and flight controls, along with the routing and verification of components, equipment and supplies on the SRR MH-65 aircraft.
Essential Duties and Responsibilities:
The primary responsibilities of the position will include but not limited to:<ul><li>
Ability to demonstrate work methods and techniques.</li><li>
Ability to read, understand and apply trade or administrative guides such as technical manuals, technical orders, blueprints, sketches, and other related documents.</li><li>
Ability to lift, reach, bend, walk, pull, sit, stand, crouch, stoop, kneel and stretch for prolonged periods of time. May be required to work in cramped, awkward and strained positions or required to climb ladders, work platforms, scaffolding and aircraft structures.</li><li>
Knowledge, skill and ability to follow appropriate safety procedures common to the trade.</li><li>
Knowledge of specific hazardous materials and hazardous wastes procedures is necessary, including the proper fitting and usage of protective gear and completion of related training.</li><li>
Must be able to carry items up to 40 pounds or heavier with assistance from other workers or weightlifting devices.</li><li>
May be required to wear cumbersome PPE and clothing for Hazardous Material operations.</li><li>
Specialized experience in advanced composite repair and experience related to USCG aircraft specific models is highly desirable.</li><li>
Experience in aircraft composite structures, to include maintenance and repair with a minimum of five (5) years practical experience or an Airframe and Powerplant (A&amp;P) certificate.</li><li>
Technical capability/experience with aircraft, airframes, components and substructures. Should include maintenance of primary, secondary, and tertiary structures.</li><li>
Experience with USCG MH-65 aircraft is highly desirable.</li><li>
Technical capability to assist in planned depot maintenance of USCG aviation assets.</li><li>
Ability to conduct research using USCG data systems such as TMAPS and Microsoft Office Suite, or similar type systems. A minimum of five (5) years of practical experience is desired.</li><li>
Familiarity with Airbus Helicopters&rsquo; OEM manuals or similar OEM manuals with the ability to research maintenance history, procedures and component limitations is desired.</li><li>
Technical capability to deal with aircraft upgrades and aging aircraft sustainment issues. Experience with new component integration and developing repair or replacement strategies for airframes, components and/or substructures.</li><li>
Capability to work in regulated areas with toxic materials present including hexavalent chromium and cadmium. This will include use of PPE such as protective clothing, respirator, etc.</li></ul>
Requirements:
<ul><li>Five (5) years of documented Experience in aircraft composite structures, to include maintenance and repair with practical experience or an Airframe and Powerplant (A&amp;P) certificate.</li><li>
Experience in advanced composite repair and experience related to USCG aircraft specific models is highly desirable.</li><li>
Technical capability/experience with aircraft, airframes, components and substructures. Should include maintenance of primary, secondary, and tertiary structures.</li><li>
High school diploma or equivalent (unless higher education is required for a particular job category).</li><li>
Ability to read, write, speak, and understand English fluently.</li><li>
Shall be citizens of the U.S.</li><li>
Possess computer skills to include a basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications.</li><li>
Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations.</li></ul>
Physical Requirements:<ul><li>
Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.</li><li>
Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.</li><li>
Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices.</li></ul>
Full-time Night Shift
Pay Rate: $44.45/hr. + Night Shift Premium of $1.25/hr.
Location: 1664 Weeksville Road, Elizabeth City, NC 27909
Benefits:<ul><li>
Health &amp; Welfare Benefits as covered by the Collective Bargaining Agreement (CBA)</li><li>
Medical, Dental, and Vision Insurance 75% covered by employer or opt-out option</li><li>
Short Term Disability</li><li>
Voluntary Life Insurance for purchase</li><li>
401K Retirement plan with matching</li><li>
Generous sick and vacation leave based on seniority aligned to the CBA</li><li>
Any additional benefits as described in the CBA</li></ul>
ICMS is an Equal Opportunity Employer: Qualified applicants are considered for employment without regard to race, color, religion, age, sex, national origin, disability or veteran status, genetics, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.</div>

Aircraft Mechanic I (Composite) - Night Shift

<div>Description:

Innovative Consulting &amp; Management Services (ICMS) is a Professional &amp; Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients.
ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is about teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it&rsquo;s about delivering on our commitments.
The purpose of this position is to provide aircraft maintenance services to the U.S. Department of Homeland Security (DHS), U.S. Coast Guard (USCG), Aviation Logistics Center (ALC) for the Short-Range Recovery (SRR) Division. To ensure that aircraft remain in top condition, ALC currently completes program depot maintenance (PDM) (described as a total overhaul of an airframe) every four (4) years on each of the USCG&rsquo;s aircraft. During this time, the aircraft are completely disassembled, cleaned, repaired, repainted and built back up before returning to the fleet. ALC may also complete overhauls and repairs for various other Government aircraft and components. In support of the USCG&rsquo;s PDM program, the USCG requires Aircraft Maintenance Services (AMS) to perform the disassembly, maintenance, repair, inspections, evaluations of sheet metal and composite structures, electrical and electrical components, avionics and avionics components, dynamic components, landing gear and flight controls, along with the routing and verification of components, equipment and supplies on the SRR MH-65 aircraft.
Essential Duties and Responsibilities:
The primary responsibilities of the position will include but not limited to: 
<ul><li>Conducting the Disassembly Phase of the PDM process. This includes complete disassembly of the aircraft and preparation for blast, within six (6) workdays of receipt of the aircraft.
</li><li>Routing of required parts will be accomplished throughout the Disassembly Phase and completed no later than nine (9) workdays of receipt of aircraft. When all aspects of the Disassembly Phase have been completed, and prior of receipt of another aircraft, this position will perform other aircraft mechanical duties for the SRR Product Line and/or throughout Aviation Logistics Center (ALC).</li><li>
Assist in the disassembly of aircraft or major components for overhaul or modification.</li><li>
Observe work processes and after appropriate instruction, select tools and supplies for proper usage to assist in removal of major components of aircraft structure or systems such as control surfaces, fairings, access panels, doors, hatches, landing gear assemblies, engines, activator units, tubing, electrical wiring, and control cables.</li><li>
Read blueprints and sketches to understand the functions of the parts or units and discusses with lead personnel how to plan and carry out work e.g., component removal, finding faulty parts or units; and how to comply with safety practices including positive tool control.</li><li>
Perform routine duties such as furnishing materials, tools and supplies to mechanic lifting and holding materials in place during operation; cleaning work areas and machines, tools and equipment.</li><li>
Clean aircraft, interior and exterior parts and assemblies with solvents or other cleaning solutions.</li><li>
May assist flight line mechanic in servicing and repairing aircraft prior to flight.</li><li>
May work as part of a team, under the direction of higher-grade employees, to accomplish larger and more complex operations such as jacking and leveling aircraft, installing and adjusting engines, landing gear assemblies, instrument panels, flight control systems, and movement of aircraft.</li><li>
Perform other Aircraft Mechanic Helper duties as required.</li></ul>
Requirements:
<ul><li>Minimum of one (1) year aircraft related mechanical experience.</li><li>
Ability to operate power and/or hand tools and equipment such as pliers, wrenches, screwdrivers, torque wrenches, micrometers, go-no-go gauges, multi-meters, feeler gauges and tension meters.</li><li>
Proper use of tools and equipment and the duties performed require continual care and attention to both to avoid accidents and to finish the work properly. Prior job experience or on-the-job training is normally required to gain this ability.</li><li>
Work assignments, not detailed in the workbook or in Maintenance Procedure Cards, require remembering directions and sequences.</li><li>
With appropriate training and experience, the employee must develop the ability to read, understand and apply trade or administrative guides such as technical manuals, technical orders, blueprints, sketches, and other related documentation.</li><li>
Possess knowledge, skill, and ability to follow appropriate safety procedures common to the trade.</li><li>
In addition, knowledge of specific hazardous materials and hazardous wastes procedures is required including fitting and usage of protective gear and completion of related training.</li><li>
Ability to read, write, speak, and understand English fluently.</li><li>
Shall be citizens of the U.S.</li><li>
Possess computer skills to include a basic knowledge sufficient to complete internet searches and prepare/edit documents utilizing word processing or spreadsheet applications.</li><li>
Shall be capable of using cumbersome Personal Protective Equipment (PPE) for Hazardous Material (HAZMAT) operations.</li></ul>
Physical Requirements:<ul><li>
Shall be capable of performing tasks that frequently require lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.</li><li>
Shall be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.</li><li>
Shall be capable of carrying items up to 40 pounds and on heavier items shall seek assistance of other workers or weightlifting devices.
</li></ul>Full-time Day Shift
Pay Rate: $28.73/hr.
Location: 1664 Weeksville Road, Elizabeth City, NC 27909
Benefits:<ul><li>
Health &amp; Welfare Benefits as covered by the Collective Bargaining Agreement (CBA)</li><li>
Medical, Dental, and Vision Insurance 75% covered by employer or opt-out option</li><li>
Short Term Disability</li><li>
Voluntary Life Insurance for purchase</li><li>
401K Retirement plan with matching</li><li>
Generous sick and vacation leave based on seniority aligned to the CBA</li><li>
Any additional benefits as described in the CBA</li></ul>
ICMS is an Equal Opportunity Employer: Qualified applicants are considered for employment without regard to race, color, religion, age, sex, national origin, disability or veteran status, genetics, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.</div>

Aircraft Mechanic Helper (Disassembly) - Day Shift

Join INNOVATIVE CONSULTING & MANAGEMENT and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

INNOVATIVE CONSULTING & MANAGEMENT

About Company

Aircraft Mechanic I (Composite) - Night Shift

Aircraft Mechanic Helper (Disassembly) - Day Shift