Qureos Mentor

LANNETT COMPANY, INC

<div><div><div><div><div><p>Specialist - Process Control Technician</p><p>
Job Summary:</p><p>
The Process Control Technician will provide technical support for maintaining, troubleshooting, programming and change control of any/all PLC/PC based and non-PLC/PC based process control systems for equipment and facilities at the Seymour Manufacturing Site. This includes the installation of new or upgraded devices, instrumentation, and equipment. The goal is to support the manufacturing of pharmaceuticals in compliance with US and EU cGMPs and other regulations as necessary.</p><p>
The Process Control Technician will support the Seymour Manufacturing Site facility and related equipment and processes to support 24/7 operation of a production facility. This position has no direct P&amp;L or budget responsibility but is responsible for contributing on an individual level to department and site goals and budgets.</p><p>
Responsibilities:</p><ul><li>
Identify, maintain, and troubleshoot PLC&rsquo;s, HMIs and PC components and programs using relevant software</li><li>
Perform preventive and corrective maintenance tasks/activities on controls and devices. PMs include routine battery replacement, routine backups, etc.</li><li>
Perform basic to intermediate levels of wiring and terminations- high/low/control voltages equipment and control devices.</li><li>
Basic level of troubleshooting abilities on all levels of control wiring</li><li>
Identify and maintain robotics system components</li><li>
Identify, maintain, and assist with troubleshooting control network components</li><li>
Identify, maintain, and troubleshoot motor controls including motor starters, Variable Frequency Drives, DC drives, and standard electrical components</li><li>
Troubleshoot electrical control circuits and control systems up to and including 480V 3-phase, 110 VAC, and 24VDC-24VAC systems</li><li>
Replace components and reconfigure programs or settings as needed to maintain a controlled or validated state</li><li>
Assist with all levels of process and controls improvements from basic wiring/component replacement or upgrades to complete system or controls upgrades</li><li>
Locate, review, and utilize ladder logic programs to aid in troubleshooting</li><li>
Perform routine and non-routine program backup from various platforms for systems and equipment</li><li>
Apply reasoning, analytical, and problem-solving skills to troubleshoot equipment or system issues</li><li>
Ability to interpret drawings- mechanical and electrical</li><li>
Ability to train other technicians on controls systems and applications</li><li>
Gather data and collect information to support Capital Appropriations Requests.</li><li>
Able to create the documentation and steps necessary to assist with execution of capital projects.</li><li>
Perform basic project management tasks</li><li>
Assist Information Technology with holistic control system infrastructure</li><li>
Flexibility of work hours and/or days along with the ability to work overtime as needed to support 24/7 plant operations</li><li>
As required &ndash; develop and deliver training on equipment operation or changes</li><li>
Support SOP and/or training documentation</li><li>
Create or support Change Control documentation</li><li>
Able to work independently and remotely to complete projects based on controls drawings, and other technical documents</li></ul><p>
Education/Qualifications:</p><ul><li>
High School Diploma/GED Required</li><li>
Associate Degree in Industrial Mechanics Technology, Instrumentation or Electronics degree is desired.</li><li>
A license and/or a certification course from a recognized source is desired. Training in in the form of an apprentice program with on-the-job training would also be taken under consideration.Certified Maintenance and Reliability Professional (CMRP)</li><li>
5 years plus experience in maintenance or operations within a pharmaceutical environment preferred</li><li>
Working or hands-on experience with process control systems, automation and/or serialized packaging operations</li><li>
Ability to read and interpret engineering drawings and schematics</li><li>
Ability to handle multiple projects and assignments with varying priorities in a manner that meets the Company&rsquo;s goals</li><li>
Ability to effectively communicate with vendors, suppliers, and manufacturing</li><li>
Ability to read and interpret wiring diagrams, mechanical and control drawings</li><li>
Basic knowledge and understanding of computers, PLCs, VFDs and other control systems/devices or equipment is preferred</li><li>
Ability to troubleshoot and program VFDs/ similar devices or controllers is preferred</li><li>
Knowledge of engineering documentation requirements in a cGMP regulated environment</li><li>
Basic knowledge and use of electrical, hand tools and test equipment common to maintenance technicians</li><li>
High level mechanical, electrical, and trouble-shooting skills</li><li>
Capability to review and correct mechanical and electrical diagrams as well as a basic level understanding of how to read blueprints</li><li>
Pharmaceutical experience or GMP experience is desired</li><li>
Knowledge of Microsoft Office (Word, Excel, PowerPoint, and Outlook) desired</li><li>
Ability to be flexible with work priorities and work effectively as part of a team</li><li>
Knowledge of INFOREAM is preferred</li><li>
Ability to be flexible with work priorities and work effectively as part of a team and in an individual capacity</li><li>
Execute mid-level computer functions for communications and work order execution</li><li>
Traditional office environment, with frequent walking to, exposed to external elements of weather, other areas of the facility, including production areas, loading docks, mechanical spaces, and warehouse</li><li>
Must be able to wear company designated protective equipment for extended periods of time, including respirators, CAL rated ARC flash gear etc.</li><li>
Must be able to stand and perform tasks or repairs for the entire work shift</li><li>
Must be able to lift 20 pounds or greater</li></ul></div></div></div></div><br>
3pm-11pm</div>

Specialist - Process Control Technician (2nd Shift 3pm-11:30pm)

<div><b>Facility Maintenance Technician I</b><div><p><b>
Job Summary:</b></p><ul><li>
Facility Maintenance Technician I has a basic to mid-range understanding of all Maintenance Mechanic related activities and duties and performs work with a moderate amount of supervision or guidance.</li><li>
The Facility Maintenance Technician I will support the Seymour Manufacturing Site facility related equipment, buildings and systems/processes which includes basic troubleshooting, preventive maintenance and repairs of existing facilities and facility related equipment as well as supporting others with the installation of new equipment and technologies.</li></ul><p><b>
Responsibilities:</b></p><ul><li>
Perform basic preventive, corrective and predictive maintenance on facilities and facility related equipment, utilities and systems.</li><li>
Perform basic troubleshooting and diagnostics on mechanical and/or electrical components on facility related equipment.</li><li>
Assist/support with new installation or system modification for all equipment and mechanical systems.</li><li>
Participate in equipment modifications, rearrangements or small projects.</li><li>
Conduct basic inspection of equipment and the facility to identify and report issues or defects and proper reporting methods to supervision.</li><li>
Perform basic duties as needed for emergency and corrective repairs.</li><li>
Flexibility of work hours and/or days along with the ability to work overtime as needed to support 24/7 plant operations.</li><li>
Takes initiative to improve skill and techniques.</li><li>
Work effectively and efficiently as a member of a team.</li><li>
Maintain a clean, orderly and safe work environment.</li><li>
Maintain documentation of all maintenance activities.</li><li>
Execute basic computer functions for communications and work order execution.</li><li>
Follow all safety practices, recognize hazards and perform necessary corrections.</li><li>
Communicates with production and other various customers as needed to complete work activities.</li><li>
Presents maintenance and repair information in individual and small group situations.</li><li>
Communicates with internal and external customers on a regular basis.</li></ul><p><b>
Education/Qualifications:</b></p><ul><li>
High School Diploma/GED required</li><li>
A minimum of 0-3 years of industrial maintenance experience is required.</li><li>
Associate Degree in Industrial Mechanics Technology, Instrumentation or Electronics degree is desirable.</li><li>
A license and/or a certification course from a recognized source in HVAC management are desired. Training in the form of an apprentice program with on the job training would also be taken under consideration.</li><li>
Minimum of 0-3 years of applicable hands-on industrial experience with facilities and facility related equipment, parts, tooling and systems within a regulated environment.</li><li>
Pharmaceutical experience or GMP experience is desired.</li><li>
Basic knowledge and use of electrical, hand tools and test equipment common to maintenance technicians.</li><li>
Basic mechanical, electrical, and trouble-shooting skills.</li><li>
Basic understanding of mechanical and electrical drawings and schematics.</li><li>
Basic knowledge of machinery, equipment, and tools necessary for the maintenance and repair of facilities and facility related equipment and spaces.</li><li>
Light machining, fabrication and welding skills are preferred.</li><li>
Ability to identify and order parts needed to complete corrective and preventive maintenance activities in a timely manner.</li><li>
Capability to perform/review mechanical and electrical diagrams as well as a basic understanding of how to read blueprints.</li><li>
Knowledge of Microsoft Office (Word, Excel, PowerPoint, and Outlook) required.</li><li>
Basic knowledge and understanding of computers, PLCs, VFDs and other machine control systems/devices or equipment is preferred.</li><li>
Must exhibit good communication and interpersonal skills.</li><li>
Build and maintain a close working relationship with customers to ensure customer service satisfaction.</li><li>
Ability to be flexible with work priorities and work effectively as part of a team.</li><li>
Team player with a &quot;can-do&quot; attitude and a proven track record of attendance.</li><li>
Traditional industrial work environment, with frequent walking to other areas of the facility, including production areas, loading docks, mechanical spaces, roofs, catwalks and warehouse spaces.</li><li>
Must be able to wear company designated protective equipment for extended periods of time, including respirators, CAL rated ARC flash gear etc.</li><li>
Must be able to stand and perform tasks or repairs for the entire work shift.</li><li>
Must be able to lift 50 pounds or greater and using dollies or carts, hand trucks be able to move items weighing over 100 pounds.</li><li>
Must be able to operate man or personnel lifts for the purpose of required work activities.</li><li>
Must be able to work in hot and/or cold conditions for periods of time to complete assignments.</li><li>
Must be able to work in closed confined spaces as designated by the company as well as on roofs and on equipment as needed.</li><li>
Business Travel- Less than 5%</li></ul></div></div>

Facility Maintenance Technician I - 1st shift

Join LANNETT COMPANY, INC and explore 2   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

LANNETT COMPANY, INC

About Company

Specialist - Process Control Technician (2nd Shift 3pm-11:30pm)

Facility Maintenance Technician I - 1st shift