Qureos Mentor

SEPCOIII ELECTRIC POWER CONSTRUCTION CO. LTD. DMCC BRANCH

1. Responsible for the engineering management or bidding work of one or more projects,2. Responsible for the equipment technical management of one or more projects,3. Responsible for work summary and experience feedback on the project.4. Responsible for decomposing the electrical part of the EPC technical contract to ensure that the design meets the requirements of the EPC contract.5. Responsible for the review of technical specifications and proposals in the bidding process.6. Responsible for the design management of the multi- projects.7. Responsible for the design interface management of the project.8. Organize the review of electrical drawings and supervise the revision and improvement.9. Responsible for the coordination of technology with owner and consulting company.10. Responsible for the coordination of the technical cooperation between the designer and the supplier, and the cooperation of the input data between the equipment and the design interface.11. Responsible for organizing electrical design meeting.12. Assist relevant departments to coordinate and supervise the progress of design drawings.13. Responsible for compiling technical changes of equipment ordering contract.14. Review and solve changes in the design.15. Responsible for recording, sorting and saving engineering technical data.16.Responsible for the clarification and evaluation of the bidding process of equipment.17. Responsible for signing technical agreements of equipment.18.Responsible for coordinating the design input collection of equipment manufacturers.19.Organize the review of electrical vendor&#x27;s drawings (excluding commissioning, operation and maintenance manuals, etc.);20.Coordinate with electrical equipment manufacturers to deal with technical issues.21.Coordinate with site team to deal with technical issues.22.Record and sort out the project electrical technical data.23.Summarizing and analyzing the electrical technology of the project.24. Feedback of electrical experience in project implementation;25. Electrical system research26. Electrical equipment technical research.

I&C Engineer

The Geotechnical Engineer will be responsible for reviewing, interpreting, and analyzing geotechnical and soil investigation reports to support the design and execution of EPC projects. This role involves providing technical recommendations on soil improvement, evaluating foundation systems, calculating safe bearing capacities (SBC) and pile capacities, and supporting general earthworks and geotechnical aspects of construction and design, including but not limited to:<ul><li>Review the preliminary geotechnical investigation and factual reports provided by the owner, external consultants or contractors or other parties during the bidding stage and propose corresponding technical clarifications. Review geotechnical aspects of tender documents, specifications, and design drawings.</li><li>Analyze subsurface investigation data (borehole logs, laboratory test results, in-situ test data) and prepare geotechnical design parameters.</li><li>Provide technical recommendations for foundation types, ground improvement methods, slope stability, erosion control and earthworks.</li><li>Review the basis of the earthwork quantities provided by the design institute or earthwork subcontractor, as well as the selection of soil improvement methods (such as concrete piles, PHC piles, vibro-compaction, stone columns, dynamic compaction, grouting, soil replacement, etc.)</li><li>Develop geotechnical design basis/ technical specifications, topographic survey technical specification, soil improvement technical specification, piling works & pile Test program technical specifications and contribute to design reports for various project phases (FEED, Detailed Design, EPC).</li><li>Perform calculations for Safe Bearing Capacity (SBC), pile capacity, settlement, and lateral load capacity based on site conditions.</li><li>Coordinate with geotechnical consultants, design teams, and construction teams to ensure geotechnical recommendations are implemented correctly.</li><li>Participate in on-site guidance for geotechnical and topographic surveys, piling works and soil improvement etc.</li><li>Take the lead in completing the control BOQ work, Support value engineering initiatives by proposing cost-effective Earthwork and technically sound ground improvement or foundation solutions.</li><li>Prepare geotechnical memoranda, presentation, design notes, and reports as required by the project.</li><li>Possess sufficient knowledge and experience to carry out geological talent cultivation work</li><li>Strong knowledge of soil mechanics, foundation engineering, and geotechnical analysis methods.</li><li>Well-versed with related International Engineering and Construction Codes and Standards, including ASTM, AASHTO, ACI, Euro codes/BS, UBC, ASCE 7, IBC, SBC, Saudi Aramco, SEC standard, Process Industry Practices (PIP). etc</li><li>Experience with geotechnical site investigations, laboratory testing, and field supervision.</li><li>Ability to quickly assess and make recommendations (rapid problem solving) for any relevant subject matter.</li><li>Experience in managing and prepare the Bill of quantity, providing input for the project schedule & resource requirements and support to the site team.</li><li>Client experience includes major clients like Saudi Aramco, ACWA, Masdar, SEC, SWCC, DEWA, would be preferred.</li><li>Excellent report writing, analytical, and communication skills with various parties, subcontractors, clients or the third party. Should have coordination skills to organize and arrange engineering work and handle interface issues.</li><li>Excellent skills in all aspects of business management including contract management, monitor management, risk identification, etc.</li><li>Ability to edit and guide the claim report to client and counterclaim report to subcontractors</li><li>Experience with soil improvement techniques (e.g., vibro-compaction, stone columns, dynamic compaction, grouting).</li><li>Understanding of earthwork design, slope stability, retaining structures, and dewatering systems.</li><li>Ability to work collaboratively in a multidisciplinary engineering environment.</li><li>Strong problem-solving and decision-making skills.</li></ul>

Geo-Technical Engineer

Be familiar with Power Plant process (water & steam cycle) and mechanical engineering design, Performance engineering design experience in combine cycle power plants will be preferredBe familiar with Power Plant KPI, including major equipment working principle and performance characteristics, especially the current mainstream GT/HRSG/ST/Condenser modelSolid knowledge of thermodynamics, fluid mechanics and heat transfer; Master the performance calculation methods and standards: Be familiar with international performance testing standard such as ASME PTC and IEC, or corresponding national standards Have modeling and simulation capabilities. Be able to conduct system modeling and simulation using software such as Thermoflex/GT pro/EBSILON/Gate Cycle, eteReview of tender documents to understand the client performance related specifications etc. and prepare technical input list/technical clarifications and list of deviations when requiredResponsible for power plant heat mass balance diagram generating and optimizationPerformance Design and Planning: During the plant bidding, system modeling and thermal calculations are conducted using software to optimize circulation parameters and equipment selection, and to evaluate the efficiency and output of different design schemesPerformance analysis and optimization: For power plants, use software to conduct steady-state performance analysis, calculate thermal efficiency and heat consumption rate, identify the causes of performance deviations, and evaluate the effectiveness of improvement measuresAuxiliary power consumption calculation, analysis and optimization; Preparing plant performance guarantee documentsPreparing plant performance correction curvesCoordination and cooperation with sponsor and main equipment vendors to complete final plant performance KPI (Thermal efficiency, heat rate, output, emission level, etc.)Application of new technologies: Focus on new technologies in the industry (such as hydrogen fuel blending, Carbon capture, etc.), and assess their feasibility for application in existing/future powerplantsResponsible for verification and evaluation of the HBDs from design institute or third part. Provides expertise and technical support on HBD calculation aspects to the Project during execution stage. For power plants, use software to conduct additional scenario analysis during execution stage if required, Optimize the thermal efficiency and heat rate, provide the effectiveness of improvement measuresReview actual input from vendors to analyze and simulate the specific HBD along with detail design proceeding if required. Responsible for review & preparation of the updated HBD based on vendors&#x27; input before plant performance guarantee verification. Provide the technical optimized proposal based on the design document review during execution stage, including review of HBD, P&ID, equipment sizing, calculation report, etc to empower the projects.Be familiar with the technical & performance features of the major OEMs in the power market, including gas turbines, HRSG, steam turbines, etc.Be familiar with overall combined cycle power plant start-up time and definition. Be familiar with overall combined cycle power plant start-up procedure and critical operation.Solid knowledge reserve in performance analysis and excellent communication skills, being able to negotiate with various OEMs (GT,HRSG,ST,etc.) or project Owner/OE on key point index.

Performance Engineer (Mechanical)

1. Responsible for the calculation and optimize EPC price of the bidding projects for Oil & Gas filed, Petrochemical etc.2. Negotiate with clients to reach agreement on price.3. Carry out the Subcontractor (including the Design Company, Civil, Mechanical, Electric, I&C Construction Company, etc.) inquiry to make the budget for construction works.4. Estimating Construction Cost by in-house to evaluate the subcontract price5. Able to negotiate with the Subcontractor who cooperate in bidding stage and get the most competitive offer after the negotiation.6. Coordinate with Procurement Dept. for equipment pricing and analyze the rationality of the submitted equipment price.7. Coordinate with the Finance Dept. for insurance cost, tax items and cost of each bidding project.8. Coordinate with the Logistics Dept. for transportation and storage cost.9. Comparison analysis the rationality of the calculated EPC price and organize the EPC Price evaluation and optimization meeting.10. Conduct internal price optimization training for relevant colleagues.11. Highest ethics and integrity responsibility.12. Other work assigned by Commercial Department Director.13. Ensure compliance with corporate policies applicable within your field14. Calculation the EPC price of the bidding project.15. Conduct the training of the relevant discipline.16. Participating in other work of department.

Estimation Engineer

Contract Management – Project Development and Tendering Phase1. Review tender documents and other related agreements (e.g. cooperation agreements, contract conditions), identify commercial and contractual risks, and provide deviation comments;2. Lead negotiations on the commercial sections of the main contract and its appendices;3. Participate in project bidding and be responsible for preparing bid documents related to commercial and contractual matters;4. Coordinate and integrate resources across departments;5. Assist in contract execution and participate in internal contract briefing sessions;6. Provide support for other ad hoc tasks assigned by the department.Contract Management – Project Execution Phase1. Manage the main EPC contract, including contract administration, change and claim management, and handling of contractual disputes;2. Organize and confirm key project milestones such as commencement, acceptance, and completion in accordance with the main contract;3. Review all incoming and outgoing project correspondence, including formal letters with the Owner and subcontractors;4. Manage project-related commercial matters;5. Oversee downstream contract management, including subcontract drafting, negotiation, and claims handling;6. Provide support for other ad hoc tasks assigned by the department.

Contract Manager

1. Experience in QC of power plant equipment, seawater desalination plant equipment, etc., with preference given to those with experience in equipment inspection and testing.2. Participating in reviewing Request for Quotation in bidding projects, and the clarification and negotiation of workshop inspection and testing clauses for bidding projects.3. Participating in review and breakdown project contracts and technical specifications.4. Responsible for preparing the technical specifications for workshop inspection and testing in equipment procurement contracts based on the project template.5. Responsible for the clarification and negotiation of technical specifications for workshop inspection and testing in equipment procurement contracts with bidders.6. Responsible for supplier equipment supervision management, including planning management, ITP (Inspection and Test Plan) and test procedure review and submission, inspection implementation management, third-party report review, and quality document review.7. During project execution, responsible for clarifying and negotiating the ITP with the owner.8. Responsible for reporting the supervision status and progress to the project supervision manager.

Surveillance Engineer

<ul><li>Responsible for the Process engineering of the Desalination, WWTP, CCPP Project and in particular for the optimization of the technical solutions implemented.</li><li>Be familiar with Power Plant process and mechanical engineering design. Process engineering design experience in Thermal Power plants will prefer.</li><li>Provides expertise and technical support to the Project as necessary.</li><li>Contributes to achievement of the overall Projects objectives, together with project manager and purchasing manager.</li><li>Responsible to develop and monitor the Engineering schedule & budget in coordination with other project stakeholders with pro-activity in implementing recovery measures.</li><li>Responsible as a key contact point throughout the project to ensure that engineering deliverables are meeting the client&#x60;s requirements, Purchase order clearance in line with technical evaluation reports, and scope management with suppliers, design Institute/subcontractors and Owner/Developer.</li><li>Review of Tender documents to understand the scope of work, client specifications etc. and prepare technical offers, technical clarifications and list of deviations when required.</li><li>Responsible for review & preparation of proposal, basic and detail engineering for projects involving large size desalination, WWTP & Combined Cycle Power plants.</li><li>Develop technically accurate and optimized proposal through client specification review, preparation/ review of P&ID, equipment sizing, system layout, etc to win new projects.</li><li>Create client specific process design for new projects including pre and post treatment requirements, membrane selection, flux selection cleaning protocols, equipment sizing, and operation and maintenance cost calculations.</li><li>Contributes to achievement of the overall Projects objectives, together with Lead engineer and Deputy lead engineer.</li><li>Ensures that the Engineering documentation is properly managed</li><li>Prepare Vendor Evaluation Report and Technical Bid Evaluation Report.</li><li>Co-ordinate with Owner / Owner’s Engineers / Vendors for timely approval of design documents.</li></ul>

Process Engineer

Join SEPCOIII ELECTRIC POWER CONSTRUCTION CO. LTD. DMCC BRANCH and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.