material engineer

planning engineer

data analyst

analyzer technician

architectural draftsman Jobs in Saudi Arabia

architectural draftsman

analyzer draftsman

INTECH Automation & Intelligence

Join to apply for the Analyzer Technician role at INTECH Automation & Intelligence12 hours ago Be among the first 25 applicantsJoin to apply for the Analyzer Technician role at INTECH Automation & IntelligenceINTECH Automation Intelligence is seeking an Analyzer Technician to join our dynamic team based in KSA. This role is pivotal in supporting Operations and Maintenance (O&M) Field Services to achieve excellence in service delivery across industries such as Oil & Gas, Petrochemicals, and Utilities. INTECH's commitment to providing cutting-edge solutions for Resident, On-Call, and Remote O&M services ensures you will contribute to transformative projects that leverage advanced technologies and streamline processes. Our Operations & Maintenance Field Services are a testament to our dedication to delivering exceptional solutions. They reflect our unwavering focus on product delivery excellence, operational reliability, and innovative approaches to overcoming industry challenges. What You'll Lead And Deliver The primary responsibility of an Analyzer Technician is to manage the installation, maintenance, calibration, and troubleshooting of process analyzers, including Gas Chromatographs, Emerson Micro Motion Coriolis meters, Fork Density meters, and GE Ultrasonic Flow Meters. Requirements: To Be Successful in This Role, You Must Have: <ul><li>6+ Years of experience in Preventive Maintenance, Remedial maintenance, Call outs, and worked in the Oil & Gas sector.</li><li>Minimum DAE in Electronics, with a preferred 2-year apprenticeship in instrumentation.</li><li>Candidates must have following Technical & Soft Skills: </li></ul>Technical Skills: <ul><li>Instrumentation Knowledge - Proficient in various process control instruments (pressure, temperature, level, and flow sensors).</li><li>Analytical Instruments - Experienced with gas chromatographs, Emerson/GE density analyzers, and other process analyzers.</li><li>Calibration & Maintenance - Skilled in calibrating and maintaining instruments in line with industry standards.</li><li>Troubleshooting & Repair - Expertise in diagnosing faults in sensors, transmitters, and analyzers, as well as replacing defective components.</li><li>Loop Checking - Conducting loop testing to ensure proper communication between field instruments and control systems.</li><li>PLC/DCS & SCADA Systems - Knowledge of control logic, signal transmission, and communication protocols (HART, Modbus, Profibus).</li><li>Gas Detection Systems - Experience working with gas detectors for hazardous environments.</li><li>Pneumatics & Hydraulics - Basic understanding of fluid dynamics in instrumentation systems.</li><li>Safety & Hazardous Area Equipment - Knowledge of explosion-proof, intrinsically safe, and hazardous area classifications.</li><li>Technical Drawings & Documentation - Ability to read P&IDs, loop diagrams, wiring schematics, and technical manuals. </li></ul>Soft Skills: <ul><li>Problem-Solving - Quick and efficient troubleshooting of instrument failures.</li><li>Attention to Detail - Ensuring precise calibration and installation.</li><li>Communication - Effectively coordinating with engineers, operators, and management.</li><li>Time Management - Managing multiple tasks effectively.</li><li>Teamwork - Collaborative work ethic with maintenance and operations teams. </li></ul>We Offer Competitive Benefits: <ul><li>Global Exposure: Opportunities to work on international projects and collaborate with global teams.</li><li>Competitive Compensation: A salary package that recognizes your expertise and contributions.</li><li>Site Allowance: Dollarized Site Allowance provided as per company policy to support your field assignments and on-site requirements</li><li>Health & Wellness: Comprehensive medical insurance for you and your dependents.</li><li>Learning Opportunities: Access to training programs, workshops, and certifications to enhance your skills.</li><li>Work-Life Balance: Paid time off, including annual leave and holidays.</li><li>Inclusive Environment: A workplace that celebrates diversity and fosters collaboration. </li></ul>Why Join INTECH Automation Intelligence? At INTECH, you will have the opportunity to work with a globally renowned industrial automation and digitalization technology company. For nearly 30 years, INTECH has partnered with major oil and gas global giants to deliver innovative solutions. As we continue to lead in the industry 4.0 era, you will be at the forefront of transformative technologies that solve real-world challenges. What to Expect After Applying? Explore how INTECH's Talent Acquisition team ensures a seamless hiring journey. From embracing talent with a passion for innovation to fostering a culture of continuous learning and growth, we're dedicated to finding and supporting the best minds in the industry. Click Here to learn more about our hiring process and discover your path to success with us. Our hiring process is designed to assess your skills and potential fairly and inclusively. After applying, you will be guided through a structured evaluation process to ensure mutual alignment. INTECH Automation Intelligence is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Seniority level <ul><li> Seniority level Not Applicable</li></ul> Employment type <ul><li> Employment type Full-time</li></ul> Job function <ul><li> Job function Engineering and Information Technology</li><li> Industries Automation Machinery Manufacturing</li></ul>Referrals increase your chances of interviewing at INTECH Automation & Intelligence by 2xGet notified about new Technician jobs in Al Khobar, Eastern, Saudi Arabia.Al Khobar, Eastern, Saudi Arabia 18 hours ago Service Technician Saudi Liebherr Company (m/f/d) Diagnostic Technician I Motor City Service Center I Mameer, Bahrain Manama, Capital Governorate, Bahrain 2 months ago Repair Technician (Low Current Electronic Devices) Early Career Trainee - Electrical Technician Manama, Capital Governorate, Bahrain 2 weeks agoWe're unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Analyzer Technician

Rawafid Industrial

<div>
 Rawafid is seeking a skilled Mechanical Draftsman to join our dynamic engineering team. As a Mechanical Draftsman, you will be responsible for creating accurate and detailed mechanical drawings and layouts to assist in project development. Your expertise in drafting tools and attention to detail will play a crucial role in producing designs that meet the requirements and standards of our various projects. You will work closely with engineers and project managers to ensure that drawings are completed efficiently and effectively. If you are a detail-oriented professional with a passion for mechanical design, we encourage you to apply!
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Prepare detailed drawings of pumping stations, STP, WTP, and any piping or pipeline tasks
 </li>
 <li>
 Developing plan and cross sections for the required piping and pipelines works
 </li>
 <li>
 Coordinating drawings with other disciplines 4. Develop drawings/models using AutoCAD, AutoCAD Plant 3D, and Revit
 </li>
 <li>
 Prepare mechanical layouts, general arrangements and section drawings for mechanical systems pumping systems, firefighting, ventilation, HVAC etc
 </li>
 <li>
 Export the data as a DXF or SHP file
 </li>
 <li>
 Collaborate with process engineers and mechanical engineers to translate their concepts into clear, precise drawings
 </li>
 <li>
 Create 3D models in AutoCAD Plant 3D and Revit to represent existing equipment, including pipe supports, routes, and fittings
 </li>
 <li>
 Prepare bill of quantity for the piping
 </li>
 <li>
 Prepare isometric drawings
 </li>
 <li>
 Preparing shop drawings
 </li>
 <li>
 Preparing as built drawings
 
 
 </li>
 </ul>
 
 Requirements
 
 
 
 <ul>
 <li>
 Associate's or Bachelor's degree in Mechanical Engineering or Drafting Technology
 </li>
 <li>
 7 - 12 years of relevant experience
 </li>
 <li>
 Proficient in CAD software such as AutoCAD, SolidWorks, or similar tools
 </li>
 <li>
 Strong understanding of mechanical design principles and practices
 </li>
 <li>
 Excellent attention to detail and strong analytical skills
 </li>
 <li>
 Ability to interpret technical documentation and engineering drawings
 </li>
 <li>
 Effective communication skills for collaboration within project teams
 </li>
 <li>
 Strong organizational skills with the ability to manage multiple tasks and meet deadlines
 </li>
 </ul>
</div>

Mechanical Draftsman

Rawafid

<div>Rawafid is seeking a skilled Mechanical Draftsman to join our dynamic engineering team. As a Mechanical Draftsman, you will be responsible for creating accurate and detailed mechanical drawings and layouts to assist in project development. Your expertise in drafting tools and attention to detail will play a crucial role in producing designs that meet the requirements and standards of our various projects. You will work closely with engineers and project managers to ensure that drawings are completed efficiently and effectively. If you are a detail-oriented professional with a passion for mechanical design, we encourage you to apply!<h3 class="jobSectionHeader">
Key Responsibilities</h3><ul>
<li>Prepare detailed drawings of pumping stations, STP, WTP, and any piping or pipeline tasks.</li>
<li>Developing plan and cross sections for the required piping and pipelines works.</li>
<li>Coordinating drawings with other disciplines 4. Develop drawings/models using AutoCAD, AutoCAD Plant 3D, and Revit.</li>
<li>Prepare mechanical layouts, general arrangements and section drawings for mechanical systems pumping systems, firefighting, ventilation, HVAC etc.</li>
<li>Export the data as a DXF or SHP file.</li>
<li>Collaborate with process engineers and mechanical engineers to translate their concepts into clear, precise drawings.</li>
<li>Create 3D models in AutoCAD Plant 3D and Revit to represent existing equipment, including pipe supports, routes, and fittings.</li>
<li>Prepare bill of quantity for the piping.</li>
<li>Prepare isometric drawings.</li>
<li>Preparing shop drawings.</li>
<li>Preparing as built drawings</li>
</ul>
Requirements<ul>
<li>
Associate's or Bachelor's degree in Mechanical Engineering or Drafting Technology.</li>
<li>7 - 12 years of relevant experience.</li>
<li>Proficient in CAD software such as AutoCAD, SolidWorks, or similar tools.</li>
<li>Strong understanding of mechanical design principles and practices.</li>
<li>Excellent attention to detail and strong analytical skills.</li>
<li>Ability to interpret technical documentation and engineering drawings.</li>
<li>Effective communication skills for collaboration within project teams.</li>
<li>Strong organizational skills with the ability to manage multiple tasks and meet deadlines.</li></ul></div>

الهامات

Location: Saudi Arabia Employment Type: Full-time Work Mode: Field / Office (mixed) Salary Package: 4,500 SAR (full package) Accommodation: Provided Mobility: Frequent travel across cities (company assignments) Other Requirements: Transferable iqama, ready to join, valid driving licenseRole SummaryWe are hiring an experienced Steam Boilers Technician to perform testing, commissioning, troubleshooting, and maintenance for industrial steam boiler systems. The role is safety-critical and requires deep technical understanding of boiler operation, burner management, steam distribution, and control systems.The ideal candidate has strong hands-on experience in the steam field and understands the risks, pressure systems, and safety requirements associated with high-pressure boilers.Key Responsibilities<ul><li>Perform testing and commissioning of new steam boilers and associated systems.</li><li>Conduct startup procedures, combustion tuning, safety checks, and performance verification.</li><li>Troubleshoot and repair issues in:</li><li>Burners (diesel/gas/oil burners, ignition systems, flame sensors, nozzles, fuel lines).</li><li>Control panels and safety interlocks (pressure switches, level controls, alarms, trips).</li><li>Boiler body and mechanical components (tubes, headers, feedwater lines, steam valves, condensate lines, pumps).</li><li>Inspect and service boiler mountings and accessories including safety valves, water level gauges, blowdown valves, pressure gauges, feed pumps, condensate return systems, and deaerators.</li><li>Carry out corrective maintenance and emergency repairs to restore safe operation.</li><li>Support preventive maintenance plans and document technical findings from site visits.</li><li>Use standard inspection and diagnostic tools to measure:</li><li>Pressure</li><li>Temperature</li><li>Draft/combustion quality</li><li>Water quality / TDS / conductivity</li><li>Efficiency and emissions (smoke analysis, O&#8322;/CO/CO&#8322; where applicable)</li><li>Report unsafe conditions and immediately escalate any critical boiler hazard.</li><li>Prepare technical service reports and communicate clearly with the office team and with clients.</li><li>Assist with operator training on safe boiler operation and routine checks.</li></ul>Technical Competencies (Must Have)<ul><li>Minimum 7 years experience in steam systems with a focus on boilers.</li><li>Strong understanding of the operating mechanism of fire-tube and water-tube boilers, boiler protections, and how steam systems behave under pressure.</li><li>Ability to identify dangerous faults (low-water conditions, overpressure, flame failure, fuel leaks, etc.) and act immediately.</li><li>Skilled in burner maintenance:</li><li>Ignition transformer / electrodes</li><li>Flame detection systems</li><li>Fuel pump and fuel train components</li><li>Nozzle and atomization quality</li><li>Combustion air / air-gas ratio tuning</li><li>Skilled in electrical and control troubleshooting:</li><li>Control panel wiring and relays</li><li>Level control systems, pressure switches, safety circuits</li><li>Basic PLC/HMI interfaces for boiler control (advantage)</li><li>Able to perform mechanical interventions:</li><li>Tube leak identification and basic repair recommendations</li><li>Gasket and flange work</li><li>Valve replacement / actuator adjustments</li><li>Feedwater pump service</li><li>Capable of using inspection and service tools:</li><li>Multimeter, clamp meter</li><li>Pressure gauges / test gauges</li><li>Smoke analyzer / combustion analyzer</li><li>Infrared thermometer / temperature probe</li><li>TDS/conductivity meters</li><li>Familiar with condensate recovery systems, steam traps, and boiler efficiency improvement practices.</li></ul>Requirements<ul><li>7+ years hands-on experience in steam boilers maintenance, troubleshooting, or commissioning (industrial/commercial sites).</li><li>Strong awareness of boiler safety and the potential hazards of high-pressure steam systems.</li><li>Able to work in the field and travel frequently between cities as required by the company.</li><li>Must hold a valid driving license and be able to drive to sites.</li><li>Must have a transferable iqama.</li><li>Ready to join immediately or within short notice.</li><li>Able to communicate professionally with clients on site and represent the company.</li></ul>Package &amp; Conditions<ul><li>Full package: 4,500 SAR / month</li><li>Accommodation provided</li><li>Frequent travel for service jobs (company assignment)</li><li>Mixed field/office role (site visits + reporting/follow-up)</li></ul>&#1606;&#1608;&#1593; &#1575;&#1604;&#1608;&#1592;&#1610;&#1601;&#1577;: &#1583;&#1608;&#1575;&#1605; &#1603;&#1575;&#1605;&#1604;

Steam Boilers Technician (Testing & Commissioning)

Sedra Albunian

A skilled Revit Draftsman to join our technical team, specializing in interior fit-out and high-end architectural projects.Key Responsibilities:<ul><li>Develop accurate Revit architectural models according to approved drawings and project specifications.</li><li>Produce detailed shop drawings and technical documentation.</li><li>Coordinate with the design and technical office teams to ensure design accuracy and clarity.</li><li>Apply revisions and maintain updated drawing files.</li><li>Ensure timely delivery with high quality and compliance with project standards.</li></ul>&#9989; Requirements:<ul><li>Minimum 5 years of hands-on experience in Revit drafting.</li><li>Prior experience in Fit-out, Interior Design, or Design &amp; Build projects is highly preferred.</li><li>Knowledge of AutoCAD is an added advantage.</li><li>Strong attention to detail and ability to work under pressure.</li></ul>&#1606;&#1608;&#1593; &#1575;&#1604;&#1608;&#1592;&#1610;&#1601;&#1577;: &#1583;&#1608;&#1575;&#1605; &#1603;&#1575;&#1605;&#1604;

Revit Draftsman (Fit-out / Architectural Projects)

SANKYU Saudi Arabia

<div>
 
 
 Responsibilities
 
 
 
 
 
 <ul>
 <li>
 Reporting to PM &amp; PdM Administration Supervisor.
 </li>
 <li>
 Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas.
 </li>
 <li>
 Prepare daily work permit and close on expiration date.
 </li>
 <li>
 Experience for rotating equipment and reciprocating compressor troubleshooting using the state of art of condition monitoring techniques.
 </li>
 <li>
 Collect &amp; analyze offline vibration data by using Portable data analyzer.
 </li>
 <li>
 Monitor and Analyze online vibration data by using online monitoring software like System-1, RecipCom, Prognost for continuous assessment of critical rotating equipment and reciprocating compressor.
 </li>
 <li>
 Diagnose equipment anomalies using vibration analysis, ultrasound, thermography and prepare preliminary analysis report and share with PM &amp; PdM Administration Supervisor.
 </li>
 <li>
 Experience of analysis advanced vibration plot data during steady state and transient events such as phase analysis, orbit, shaft centerline, bode plot, polar plot, etc.
 </li>
 <li>
 Perform other duties such as maintaining word records, data backup, history logs, review process parameters on daily basis on PHD trend.
 </li>
 <li>
 Carry out in-situ balancing for rotating equipment as required and witness shop rotor&rsquo;s balancing.
 </li>
 <li>
 Follow-up on the results of recommendations as a quality control measure.
 </li>
 <li>
 Other duties as assigned by Condition Monitoring Supervisor.
 </li>
 <li>
 Actively participate in department meetings and facility teams relating to the improvement of the Reliability Team, plant safety, quality, innovation and efficiency.
 </li>
 <li>
 Train and knowledge share to new joiner of vibration Technician.
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 
 
 
 <ul>
 <li>
 Mechanical Engineering degree with +10 years&rsquo; experience for rotating equipment troubleshooting and condition monitoring.
 </li>
 <li>
 Certified machinery vibration analyst category III (ISO 18436-2) is mandatory.
 </li>
 <li>
 Certified oil analysis level I.
 </li>
 <li>
 Certified ultrasound level I &amp; Thermography level I is advantage.
 </li>
 <li>
 Experience of Bently Nevada system 1 &amp; Prognost.
 </li>
 <li>
 Experience with AMS Emerson vibration analysis software.
 </li>
 <li>
 Experience of UE 15000 and analysis software.
 </li>
 </ul>
 
 
</div>

Rotating Specialist

<div>Rawafid is seeking a talented and detail-oriented Electrical Draftsman to join our engineering team. In this role, you will be responsible for producing accurate and comprehensive electrical drawings and plans for various construction projects. Working closely with engineers and project managers, you will interpret design specifications and create detailed schematics, wiring diagrams, and layout plans. Your expertise in drafting techniques and electrical systems will play a critical role in ensuring that projects meet all relevant standards and requirements. If you have a strong background in electrical drafting and a commitment to quality, we welcome your application to become a valued member of the Rawafid team.<h3 class="jobSectionHeader">
Key Responsibilities</h3><ul>
<li>Prepare drawing transmittals, revision logs, and drawing issue registers for submission to consultants and clients.</li>
<li>Coordinate with electrical engineers, mechanical draftsmen, and civil teams to ensure drawings are fully integrated and free of clashes</li>
<li>Participate in technical coordination meetings to resolve drawing and interface issues.</li>
<li>Maintain organized documentation of all drafts, revisions, and project files, ensuring proper version control.</li>
<li>Prepare single-line diagrams (SLDs), load schedules, cable schedules, and schematic diagrams for LV and MV systems.</li>
<li>Produce shop drawings and as-built drawings in coordination with site teams and consultants.</li>
<li>Incorporate feedback and comments from design reviews, site inspections, and consultants into updated drawings.</li>
<li>Participate in technical coordination meetings to resolve drawing and interface issues.</li>
<li>Maintain organized drawing records and ensure all revisions are tracked, updated, and issued through document control procedures.</li>
<li>Follow company standards for title blocks, drawing numbering, layering, and line weights to maintain consistency.</li>
<li>Ensure all drawings comply with relevant codes and standards (e.g., IEC, NEC, SEC, SASO, or project-specific standards).</li>
<li>Implement QA/QC checks before submission to ensure completeness, accuracy, and consistency.</li>
<li>Adhere to company and industry standards and regulations in all drafted materials.</li>
<li>Provide accurate quantities and material take-offs from drawings to assist procurement teams.</li>
<li>Coordinate with site engineers to update as-built markups and reflect actual field conditions.</li>
<li>Assist in preparing shop drawing submittal packages, including specifications, datasheets, and layouts.</li>
<li>Follow HSSE procedures in office and site environments.</li>
<li>Maintain confidentiality of project data, design information, and client documents.</li>
</ul>
Requirements<ul>
<li>
Associate's degree or diploma in Autodesk AutoCAD.</li>
<li>7 - 12 years of relevant experience as an electrical draftsman in the construction or engineering industry.</li>
<li>Proficient in AutoCAD (2D/3D) and familiar with Revit MEP, BIM 360, or Navisworks for coordination.</li>
<li>Strong understanding of electrical principles, codes, and standards, including NEC.</li>
<li>Ability to interpret engineering specifications and technical drawings accurately.</li>
<li>Excellent attention to detail with a focus on producing high-quality and precise drawings.</li>
<li>Good communication and interpersonal skills for effective collaboration with team members.</li>
<li>Strong organizational skills with the capability to manage multiple projects and deadlines.</li>
<li>Ability to work independently as well as in a team environment.</li>
<li>Basic understanding of electrical systems, circuits, and load distribution to support design intent.</li></ul></div>

Electrical Draftsman

Explore 11+ Analyzer draftsman in Saudi Arabia this November. Find roles across top companies and apply now to boost your career.

11 analyzer draftsman jobs IN Saudi Arabia

Analyzer Technician

Mechanical Draftsman

Mechanical Draftsman

Steam Boilers Technician (Testing & Commissioning)

Revit Draftsman (Fit-out / Architectural Projects)

Rotating Specialist

Electrical Draftsman