hvac technician

ac technician

instruments technician

valve technician

a/c technician

control systems technician

Al Jazeera Manpower

Position: E&amp;I Technician / Instrumentation Technician Department: Maintenance, Control Systems, or Automation Industry: Oil &amp; Gas, Petrochemical, Power, Manufacturing Experience Required: 3+ years in instrumentation and electrical maintenance Certifications Preferred: ISA Certified Control Systems Technician (CCST), COMPEX (for hazardous areas) Location: [Plant/Site/Offshore Based] Reporting To: I&amp;E Supervisor or Maintenance LeadJob SummaryWe are seeking a highly skilled dual-trade E&amp;I Technician with expertise in maintaining, calibrating, and troubleshooting industrial instrumentation and electrical systems. The ideal candidate will possess hands-on experience with process control instruments, safety systems, and electrical equipment in regulated environments. You will ensure the reliability and accuracy of measurement and control systems critical to plant safety, efficiency, and productivity.Key Responsibilities1. Instrumentation Maintenance &amp; Calibration<ul><li>Calibrate and maintain field instruments:</li><li>Pressure, temperature, level, and flow transmitters</li><li>Control valves, positioners, actuators, and solenoid valves</li><li>Analytical instruments (pH, conductivity, gas detectors)</li><li>Perform loop checks, instrument verifications, and functional tests</li><li>Troubleshoot 4-20mA loops, HART, Foundation Fieldbus, and Profibus networks</li></ul>2. Electrical &amp; Control Systems Support<ul><li>Maintain and troubleshoot:</li><li>Motor control circuits, starters, and VFDs</li><li>PLC I/O modules, marshalling cabinets, and junction boxes</li><li>Intrinsic safety (IS) barriers and isolators</li><li>Support DCS/PLC system maintenance and minor modifications</li><li>Install and terminate instrument cabling and tray systems</li></ul>3. Safety &amp; Critical Systems<ul><li>Maintain safety instrumented systems (SIS) and fire &amp; gas detectors</li><li>Test and inspect emergency shutdown (ESD) systems and critical alarms</li><li>Work in hazardous areas following ATEX/IECEx standards and procedures</li></ul>4. Documentation &amp; Compliance<ul><li>Update calibration records, loop diagrams, and instrument datasheets</li><li>Complete work orders in CMMS (SAP, Maximo) with accurate historical data</li><li>Adhere to management of change (MOC) procedures for instrument modifications</li><li>Comply with quality standards (ISO 9001) and safety procedures (PTW, LOTO)</li></ul>Qualifications &amp; RequirementsMandatory:<ul><li>Diploma in Instrumentation, Electronics, or Electrical Engineering</li><li>3+ years experience maintaining instruments in process industry</li><li>Experience with:</li><li>Pressure/flow/temperature/level measurement</li><li>Control valve maintenance and stroking</li><li>PLC/DCS interface troubleshooting</li><li>Ability to interpret:</li><li>P&amp;IDs, loop diagrams, and electrical schematics</li><li>Instrument datasheets and specifications</li><li>Proficiency with:</li><li>Calibrators (pressure, temperature, mA simulators)</li><li>HART/Fieldbus communicators</li><li>Multimeters and process meters</li></ul>Preferred:<ul><li>ISA CCST Certification (Level I or II)</li><li>COMPEX Certification for hazardous areas</li><li>Experience with:</li><li>Siemens, Rockwell, or Yokogawa control systems</li><li>Safety instrumented systems (SIL-rated equipment)</li><li>Vibration monitoring and machinery protection systems</li><li>Oil &amp; gas, petrochemical, or power plant experience</li><li>Offshore certification (BOSIET/HUET) if required</li></ul>Technical Skills:<ul><li>Instrumentation:</li><li>Calibration techniques and standards</li><li>Control valve tuning and characterization</li><li>Pneumatic and hydraulic systems</li><li>Electrical:</li><li>Low voltage electrical systems</li><li>Intrinsic safety concepts</li><li>Electrical measurements and testing</li></ul>Soft Skills:<ul><li>Strong analytical and problem-solving abilities</li><li>Attention to detail and commitment to accuracy</li><li>Safety-focused mindset</li><li>Ability to work independently and in teams</li><li>Good communication for shift handovers and reporting</li></ul>Working Conditions<ul><li>Environment: Plant/field environment, potentially hazardous areas</li><li>Schedule: Shift work (12-hour shifts), possible call-outs</li><li>Physical: Climbing, lifting, working at heights and in confined spaces</li><li>Travel: Site-based with possible offshore rotation</li></ul>What We Offer<ul><li>Competitive salary with shift allowances</li><li>Health, life, and accident insurance</li><li>Ongoing training and certification support</li><li>Career progression to Senior Technician or Specialist roles</li><li>Safety and performance bonuses</li></ul>Job Types: Full-time, Permanent

INSTRUMENTATION/ELT TECHNICIAN (OIL and GAS EXPERIENCE)

Pigeon Engineering

Qatar Local Hiring !!Instruments TechnicianLocation: Umm Bab Duration: 4&ndash;6 Months (Extendable based on operational needs)Job Description: We are seeking skilled Instruments Technicians to support maintenance and operational activities. The ideal candidates will be responsible for installation, calibration, troubleshooting, and maintenance of instrumentation systems and equipment.Requirements:<ul><li>Technical Diploma or Certification in Instrumentation Engineering or a related technical field</li><li>Formal training in instrumentation systems is an advantage</li><li>3&ndash;5 years of relevant experience in industrial or plant instrumentation</li><li>Strong understanding of instrumentation, control systems, and field devices</li><li>Ability to work in a plant/production environment</li></ul>Location: Umm Bab, Qatar Duration: 4&ndash;6 months (extendable as required)Job Types: Full-time, Contract Contract length: 6 months

Instrument Technician

Leelaak HR Solutions

Brief Job Description and RequirementsJob Position: Instrument Technician Location: Umm Bab, QatarDuration: 6 Month&rsquo;s Extendable<ul><li>Experience: Minimum 3-5 Years&rsquo; experience in similar position. </li><li>Install and configure instrumentation and control systems.</li><li>Calibrate sensors, transmitters, and other measurement devices.</li><li>Perform routine maintenance and inspections.</li><li>Troubleshoot and repair faulty instrumentation equipment.</li><li>Education: ITI or relevant. </li><li>Immediate available with Valid QID &amp; Visa to join immediately. </li><li>Salary: Best In the Industry plus Food, Accommodation and Transportation.</li></ul>Only shortlisted candidates will be contacted for interviews.Interested candidates may forward their CV to jobsleelaak@gmail.comor WhatsApp +974 72046004Follow us on Instagram: @leelaakhrsolutionsJob Types: Full-time, Contract Contract length: 6 months

GETP Holding

<div>
 
 Instrumentation /Telecom/ Elt Technicians
 
 
 
 <ul>
 <li>
 The candidate shall have relevant experience in the oil and gas or petrochemical industry or in a similar facility.
 </li>
 <li>
 The candidate should have experience in operation and maintenance of PAGA System, TETRA Radio, VHF/UHF Radio, Audio Visual System, CCTV Camera, Access Control System, communication systems and networks and Driver Virtual Simulator System, SCADA and BMS, etc.
 </li>
 <li>
 The candidate should have experience in SMART field transmitters, field Instruments such as flow meters, level transmitters, motorized valves, temperature transmitters, solenoid valves, PLC's, SCADA, traffic light systems, vibration monitoring systems, fire &amp; gas system.
 </li>
 <li>
 Experience in weather monitoring stations attached with SOLAR PLANTS. The technician should be familiar with international codes and standards.
 </li>
 <li>
 Staff selected for this position shall have good spoken, skills in English.
 </li>
 </ul>
</div>

Instrumentation/Telecom/ELT Technician

GETP Group

<div><div>Valve Technicians - 1:</div><ul><li>
Minimum Five (5) years in repair of PCVs, TCVs, LTs, PTs, pneumatic and electronic Instruments with emphasis on Solid State Logic / Microprocessor control equipment and protection in Oil and Gas/Petrochemical Industry or similar facilities.</li><li>
Install, clean, calibrate, maintain, modify, overhaul, decommissioning and testing all installed instrumentation and control systems, including SDVs, PCVs, SOVs, TCVs, Level Transmitters, PTs, pneumatic and electronic process control instrumentation.</li><li>
Assist in maintenance, faultfinding, repair and calibration control and protection system in accordance with prescribed routines and preventive maintenance procedures.</li><li>
Salary - 1700 Basic</li><li>
Fixed Allowance - 300</li><li>
Food - Company scope</li><li>
Accommodation - Company scope</li><li>
Transportation - Company scope</li></ul></div>

Valve Technician

V2X Inc

<div>
 
 Overview
 
 
 
 At V2X, we bring more than 120 years of combined expertise in mission support, logistics, and operational excellence to our customers worldwide. We are a leading provider of integrated solutions that connect people, systems, and technologies &mdash; from base to battlefield. Our team is committed to integrity, innovation, and delivering results that ensure mission success in the most complex environments.
 
 
 Industrial Controls Specialist to support the design, installation, programming, and maintenance of automated fire suppression systems across industrial and mission-critical facilities. This role requires deep expertise in control systems integration, NFPA compliance, and cross-functional coordination with fire protection engineers, facility managers, and safety personnel.
 
 
 This position description is subject to change at any time as needed to meet the requirements of the program or company.
 
 
 
 This position is contingent upon contract award.
 
 
 
 
 Responsibilities
 
 
 
 
 Major Job Activities:
 
 
 
 <ul>
 <li>
 Inspect, maintain, and repair pumps, motors, valves, and electrical control panels.
 </li>
 <li>
 Integrate fire suppression controls with Building Automation Systems (BAS), PLCs, and SCADA platforms.
 </li>
 <li>
 Develop and maintain control logic, HMI interfaces, and alarm protocols to ensure rapid and reliable system response.
 </li>
 <li>
 Conduct functional testing, commissioning, and performance verification of fire suppression controls.
 </li>
 <li>
 Ensure compliance with NFPA standards (e.g., NFPA 72, 2001, 13), local codes, and client specifications.
 </li>
 <li>
 Collaborate with fire protection engineers to interpret system schematics, wiring diagrams, and sequence of operations.
 </li>
 <li>
 Maintain documentation including control narratives, panel layouts, and as-built drawings.
 </li>
 <li>
 Provide technical support during audits, inspections, and emergency response drills.
 </li>
 <li>
 Train maintenance staff and operators on system functionality and troubleshooting procedures.
 </li>
 <li>
 Maintain logs and submit reports on station performance and maintenance.
 </li>
 <li>
 Document system changes and maintains accurate records of maintenance and repairs.
 </li>
 <li>
 Ensure compliance with safety standards, codes, and regulations.
 </li>
 <li>
 Performs all other duties as assigned.
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Minimum Qualifications:
 
 
 
 <ul>
 <li>
 Associate or Bachelor&rsquo;s degree in Electrical Engineering, Automation, Fire Protection Technology, or related field.
 </li>
 <li>
 3&ndash;5 years of experience in industrial controls, preferably with fire suppression systems.
 </li>
 <li>
 NICET Level II or higher in Fire Alarm Systems or Special Hazards Systems.
 </li>
 <li>
 OSHA 30 or equivalent safety training.
 </li>
 <li>
 Manufacturer-specific training (e.g., Kidde, Ansul, Fike, Siemens fire systems).
 </li>
 <li>
 Requires a high school diploma or equivalent
 </li>
 <li>
 Valid driver license
 </li>
 <li>
 Must be able to pass a favorable national agency check (NAC)
 </li>
 <li>
 Active Secret Clearance.
 
 
 </li>
 </ul>
 
 Required Skills
 
 
 
 <ul>
 <li>
 Proficiency in PLC programming (e.g., Allen-Bradley, Siemens), HMI development, and industrial networking.
 </li>
 <li>
 Familiarity with fire alarm panels, releasing panels, and integration with suppression systems.
 </li>
 <li>
 Strong understanding of NFPA codes and UL/FM-listed fire protection equipment.
 </li>
 <li>
 Ability to read and interpret engineering drawings, control schematics, and technical manuals.
 </li>
 <li>
 Excellent problem-solving, documentation, and communication skills.
 </li>
 <li>
 Ability to read blueprints and electrical diagrams Strong analytical and problem-solving skills for diagnosing complex system issues.
 </li>
 <li>
 Ability to work independently and manage multiple tasks in a fast-paced environment.
 </li>
 <li>
 Excellent communication skills for coordinating with teams and documenting work.
 
 
 </li>
 </ul>
 
 At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients
 
</div>

Industrial Controls Specialist – Fire Suppression Systems

TDGISERV Qatar

<ul><li>Maintain, Monitor and repairs of the BMS controlled systems, Carry out routine checks for correct operation and conduct troubleshooting and minor repairs of all control equipment as directed by site management and Daily/Weekly Servicing Plan.</li><li>Monitor the operation of the HVAC and Fire systems using the BMS to monitor performance. Adjust variables and provide adjustment as required to ensure systems are operating correctly within parameters</li><li>Candidate should be available in Doha for f2f interview</li><li>should be on transferable visa with NOC</li></ul>Job Types: Full-time, Permanent

BMS /SCADA Operator

Explore 1540+ Control systems technician in Doha this December. Find roles across top companies and apply now to boost your career.

1540 control systems technician jobs IN Doha

INSTRUMENTATION/ELT TECHNICIAN (OIL and GAS EXPERIENCE)

Instrument Technician

Instrument Technician

Instrumentation/Telecom/ELT Technician

Valve Technician

Industrial Controls Specialist – Fire Suppression Systems

BMS /SCADA Operator