structural engineer Jobs in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar

structural engineer

mechanical supervisor Jobs in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar

mechanical supervisor

electrical draftsman Jobs in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar

electrical draftsman

painting inspector (bgas) Jobs in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar

painting inspector (bgas)

qa/qc engineer Jobs in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar

qa/qc engineer

dimentional and welding inspector

Pigeon Engineering

We&rsquo;re Hiring!Dimensional and Welding InspectorDuration: Three (3) months, extendableLocation: Industrial AreaKey Requirements:<ul><li>Diploma or Degree in Mechanical or related field.</li><li>Minimum 8-10 years of experience in the same field</li><li>Verification of dimensions per drawings/specifications</li><li>Use of precision measuring instruments like micrometers, height gauges, bore gauges, thread gauges etc.</li><li>Reading fabrication and assembly drawings</li><li>GD&amp;T (Geometric Dimensioning &amp; Tolerancing) knowledge.</li><li>Fit-up inspection of: columns, rafters, beams, platforms, ladders etc.</li><li>Verification of alignment, plumb, angle, elevation, and squareness</li><li>Edge preparation and root gap inspection, Weld size, profile, and misalignment checks, Pre/post-weld dimensional verification.</li><li>Tolerances &amp; Alignment Checks</li><li>Familiarity with fabrication sequences and QA coordination.</li><li>Experienced in Steel fabrication, Piping &amp; structural work, Machining and components, Module assembly and mechanical fit-up</li><li>CSWIP Certification.</li><li>Freelancer status only.</li><li>Must be currently residing in Qatar with a valid Qatar ID.</li><li>Availability for immediate start.</li></ul>If you meet these requirements and are ready to join a dynamic team, we encourage you to apply. We look forward to welcoming a new member who can contribute to our projects with precision and creativity.Apply today and become a part of our team!Or send your application to:hiring@pigeonengg.comWhatsApp: +974 7479 3859Job Type: Temporary Contract length: 3 monthsPay: From QAR1.00 per month

Dimentional and Welding Inspector

EMKAN ENGINEERING

Position Overview:The QC Supervisor is responsible for overseeing all quality control activities related to welding, fabrication, and inspection processes to ensure compliance with project specifications, codes, and standards. The role requires strong leadership, technical knowledge, and hands-on supervision to ensure product quality and compliance with client and international requirements.The ideal candidate must hold a valid CSWIP 3.2.2 Senior Welding Inspector certification.Key Responsibilities:<ul><li>Supervise and coordinate QC Inspectors in daily inspection activities for welding, NDT, dimensional checks, and material verification.</li><li>Ensure that all works are performed in accordance with approved procedures, standards (ASME, AWS, ISO, API, etc.), and project specifications.</li><li>Review and approve welding procedures (WPS, PQR, WPQ) and ensure welders&rsquo; qualifications are up to date.</li><li>Monitor welding operations to verify compliance with WPS and ensure correct consumables, parameters, and techniques are used.</li><li>Liaise with clients, third-party inspectors, and project teams to address and resolve quality-related issues.</li><li>Conduct fit-up, visual, and final inspections before offering for client or third-party review.</li><li>Manage and maintain all quality documentation, including inspection reports, calibration records, and traceability logs.</li><li>Coordinate NDT activities and ensure results are properly reviewed and recorded.</li><li>Lead or participate in internal and external quality audits.</li><li>Provide training, guidance, and mentorship to junior QC inspectors.</li><li>Ensure all non-conformances are recorded, investigated, and closed out through corrective and preventive actions.</li><li>Promote a strong quality culture across all project phases.</li></ul>Qualifications &amp; Certifications:<ul><li>Mandatory: CSWIP 3.2.2 Senior Welding Inspector certification (valid and in-date).</li><li>Preferred: NDT Level II certification (RT, UT, MT, PT).</li><li>Diploma or Degree in Mechanical / Metallurgical / Welding Engineering or equivalent technical field.</li><li>Minimum 8&ndash;10 years of experience in QA/QC within fabrication, construction, or oil &amp; gas industry, with at least 3 years in a supervisory role.</li><li>Sound knowledge of welding processes (SMAW, GTAW, GMAW, FCAW, SAW), materials, and codes (ASME, AWS, API, ISO, etc.).</li><li>Familiar with project quality documentation, ITPs, and inspection procedures.</li><li>Strong understanding of HSE and quality assurance principles.</li></ul>Skills &amp; Competencies:<ul><li>Excellent leadership and team coordination skills.</li><li>Strong analytical and problem-solving ability.</li><li>Good communication and reporting skills (written and verbal).</li><li>Attention to detail with a proactive approach to quality issues.</li><li>Ability to work effectively in a multicultural, fast-paced project environment.</li></ul>Job Type: Full-time

QC Supervisor (CSWIP 3.2.2 Certified)

DIME INTERNATIONAL MECHANICAL ENGINEERING

1. About the Role:We are a Qatar-based company specializing in Steel Structural Fabrication, seeking a talented and motivated Junior QC Inspector to join our growing team.2. Key Responsibilities:Perform visual weld inspections and monitor welding parameters.Verify compliance with WPS and PQR standards.Assist in NDT activities (PT, MT, RT) and maintain weld traceability.Support welder qualification tests and third-party inspections.3.Minimum Qualification:Education:Bachelor&rsquo;s Degree or a Diploma/ITI in Mechanical Engineering or equivalent.Preferred Certifications:CSWIP 3.0/3.1 or AWS CWI (an advantage).NDT Level 2 in PT, MT, or RT is mandatory.Experience:Candidates with 3-5 years of experience are welcome to apply.Welding inspection : 3 years (Preferred)What We Offer:A dynamic and professional work environmentOpportunities for career growth and skill developmentExposure to large-scale steel fabrication projectsJob Types: Full-time, Permanent

QC WELDING NSPECTOR

C2HR LLP

About the RoleWe are looking for a skilled QC Inspector to join our quality team for ongoing oil &amp; gas and industrial projects. The candidate should have hands-on experience with QatarEnergy standards and strong technical knowledge of inspection, testing, and quality control procedures in EPC environments.Key Responsibilities&middot; Perform inspection and testing activities for piping, welding, mechanical, civil, or coating works as per approved ITPs and project specifications.&middot; Ensure all materials and workmanship comply with QatarEnergy and international standards (ASME, API, ISO, etc.).&middot; Verify and review material certificates, calibration records, and test reports.&middot; Monitor site activities and raise inspection requests (IRs) as required.&middot; Identify and report non-conformances, assist in corrective actions, and maintain accurate QC documentation.&middot; Coordinate with clients, consultants, and subcontractors during inspection stages.&middot; Support QA/QC Engineer in preparing final dossiers and handover documentation.Qualifications &amp; Experience&middot; Diploma or Bachelor&rsquo;s degree in Engineering or related discipline.&middot; Minimum 5 years&rsquo; experience as a QC Inspector in oil &amp; gas or industrial projects.&middot; Prior experience in QatarEnergy or major oil &amp; gas projects is highly preferred.&middot; Certified in one or more of the following: CSWIP 3.1 / AWS / BGAS / NDT Level II / Coating Inspector.&middot; Strong knowledge of QA/QC procedures, inspection techniques, and documentation.&middot; Good communication and reporting skills.Job Types: Full-time, Contract Contract length: 24 monthsPay: QAR10,000.00 - QAR12,000.00 per month

QC Inspector – Oil & Gas / Industrial Projects

SFAI Qatar

Key Responsibilities&middot; Perform inspection and testing activities for piping, welding, mechanical, civil, or coating works as per approved ITPs and project specifications.&middot; Ensure all materials and workmanship comply with QatarEnergy and international standards (ASME, API, ISO, etc.).&middot; Verify and review material certificates, calibration records, and test reports.&middot; Monitor site activities and raise inspection requests (IRs) as required.&middot; Identify and report non-conformances, assist in corrective actions, and maintain accurate QC documentation.&middot; Coordinate with clients, consultants, and subcontractors during inspection stages.&middot; Support QA/QC Engineer in preparing final dossiers and handover documentation.Qualifications &amp; Experience&middot; Diploma or Bachelor&rsquo;s degree in Engineering or related discipline.&middot; Minimum 5 years&rsquo; experience as a QC Inspector in oil &amp; gas or industrial projects.&middot; Prior experience in QatarEnergy or major oil &amp; gas projects is highly preferred.&middot; Certified in one or more of the following: CSWIP 3.1 / AWS / BGAS / NDT Level II / Coating Inspector.&middot; Strong knowledge of QA/QC procedures, inspection techniques, and documentation.&middot; Good communication and reporting skills.Job Types: Full-time, PermanentPay: QAR7,000.00 - QAR8,000.00 per month

QC Inspector

Gulf Overseas HR Consultancy

We are currently hiring a skilled and experienced Welder to join our team. The ideal candidate will be responsible for performing high-quality welding work on various metal components and structures according to technical specifications and safety standards.This position is strictly focused on welding tasks (not fabrication or assembly work) and requires a strong background in industrial or structural welding techniques, including TIG, MIG, and ARC welding.Key Responsibilities:<ul><li>Perform welding operations using various techniques, including TIG, MIG, and ARC welding, depending on project needs.</li><li>Weld joints, seams, and structural components to required specifications, ensuring strong and clean welds.</li><li>Conduct visual inspections of welds to identify and correct defects or inconsistencies.</li><li>Follow instructions, welding procedures, and engineering drawings to ensure accuracy.</li><li>Prepare surfaces and materials for welding, including grinding, cleaning, and proper alignment.</li><li>Monitor the welding process and adjust settings for different types of metals and thicknesses.</li><li>Ensure proper care and maintenance of welding equipment and tools.</li><li>Comply with all workplace health and safety regulations, including the proper use of PPE.</li><li>Maintain a clean and safe work area and report any safety concerns to the supervisor.</li></ul>Requirements:<ul><li>Certification in welding from a recognized institution or vocational training center.</li><li>Minimum 2 years of experience as a professional Welder in an industrial, mechanical, or construction environment.</li><li>Skilled in TIG, MIG, and ARC welding techniques.</li><li>Ability to read and understand welding procedures, technical drawings, and welding symbols.</li><li>Strong attention to detail and quality.</li><li>Familiarity with welding safety standards and practices.</li><li>Physically fit and capable of working in various environments (e.g., workshop, site-based, elevated positions).</li><li>Ability to work independently or as part of a team.</li></ul>Accommodation and transportation provided by company.Job Type: Full-timePay: QAR1,800.00 - QAR2,500.00 per month

Welder

Job Opening: Welding Engineer (IWE Certified)Company: Emkan Engineering Location: Qatar Department: Piping Fabrication WorkshopEmkan Engineering is looking for qualified and experienced Welding Engineers to join our Piping Fabrication Workshop in Qatar.Requirements:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering or related field.</li><li>International Welding Engineer (IWE) certification (mandatory).</li><li>Proven experience in piping fabrication and welding operations.</li><li>Strong knowledge of welding codes and standards (ASME IX, ISO, EN, etc.).</li><li>Ability to develop and manage WPS, PQR, and Welder Qualification tests.</li><li>Excellent technical, analytical, and communication skills.</li></ul>Key Responsibilities:<ul><li>Oversee and support all welding activities in the piping fabrication workshop.</li><li>Ensure compliance with applicable welding procedures, standards, and client specifications.</li><li>Conduct qualification of welders and procedures (WPS/PQR/WQT).</li><li>Resolve welding-related issues and ensure quality and safety standards are met.</li><li>Coordinate with QA/QC, production, and inspection teams.</li></ul>Job Type: Full-time

Welding Engineer

Explore 3373+ Dimentional and welding inspector in Qatar Jobs In Qatar Jobs In Doha Qatar Jobs In Doha Qatar Jobs In Qatar Moph License Jobs In Qatar this November. Find roles across top companies and apply now to boost your career.