hv electrical engineer

INTEC Energy Solutions

<div>
 
 INTEC Energy Solutions delivers best-in-class services in Engineering, Procurement, Construction (EPC), Battery Energy Storage Systems (BESS), Project Development, Consultancy, and Operation &amp; Maintenance, along with New Energy Solutions.
 
 
 
 
 
 With a globally experienced team, INTEC has managed over 190 projects and achieved an impressive installed and secured capacity of 3.9 GW. Headquartered in the United Kingdom, INTEC also operates offices in Germany, T&uuml;rkiye, Australia, New Zealand, Azerbaijan, Romania, Mauritius, and Philippines with plans for further expansion.
 
 
 
 
 
 As an international company, we are looking for a
 
 HV Electrical Engineer
 
 based in
 
 Ankara, T&uuml;rkiye.
 
 
 
 
 
 
 
 
 
 
 Main Responsibilities:
 
 
 
 
 
 
 
 Design and Engineering:
 
 
 <ul>
 <li>
 Develop and review basic and detailed engineering designs for high-voltage substations, with a specific focus on primary equipment (circuit breakers, disconnectors, power transformers, measurement transformers, surge arresters, reactors, GIS, etc.).
 </li>
 <li>
 Perform and/or supervise relevant electrical calculations, such as equipment sizing, short-circuit studies, insulation coordination, grounding studies, and power cable selection.
 </li>
 <li>
 Prepare and/or review detailed technical specifications for the purchase of primary equipment, ensuring compliance with international standards (IEC, IEEE, etc.) and specific project requirements.
 </li>
 <li>
 Perform technical and economic tabulation of bids from primary equipment suppliers.
 </li>
 <li>
 Supervise and coordinate the manufacturing, factory acceptance tests (FAT), transport, and installation phases of primary equipment.
 </li>
 <li>
 Manage the technical interface with suppliers, contractors, and other departments involved in the project.
 </li>
 <li>
 Supervise the on-site assembly and installation of primary equipment, ensuring correct execution according to plans and specifications.
 </li>
 <li>
 Lead or actively participate in on-site acceptance tests (SAT) and in the commissioning of primary equipment and associated systems.
 </li>
 <li>
 Resolve technical problems that arise during installation and commissioning.
 </li>
 <li>
 Collaborate in the development of preventive and corrective operation and maintenance plans and procedures for primary equipment.
 </li>
 <li>
 Ensure that all designs, equipment, and procedures comply with applicable electrical safety and environmental regulations.
 </li>
 </ul>
 
 
 
 
 
 Qualifications and Experience:
 
 
 
 
 
 <ul>
 <li>
 
 Education:
 
 University Degree in Electrical Engineering or similar.
 </li>
 <li>
 
 Experience:
 
 </li>
 <li>
 Minimum of 7 years of demonstrable experience in the design, specification, installation, and/or maintenance of primary equipment in high-voltage electrical substations (preferably 220kV or higher, both AIS and GIS).
 </li>
 <li>
 Experience in interpreting electrical drawings and control schematics.
 </li>
 <li>
 Experience in supervising construction and commissioning of substations will be valued.
 </li>
 <li>
 
 Technical Knowledge:
 
 </li>
 <li>
 Extensive knowledge of the operating principles, design, construction, and testing of primary substation equipment.
 </li>
 <li>
 Familiarity with international technical standards (IEC, IEEE).
 </li>
 <li>
 Knowledge of electrical design and simulation software (e.g., ETAP, DigSILENT PowerFactory, AutoCAD Electrical).
 </li>
 <li>
 
 Skills:
 
 </li>
 <li>
 Excellent analytical and technical problem-solving skills.
 </li>
 <li>
 Ability to work autonomously and as part of a multidisciplinary team.
 </li>
 <li>
 Solid verbal and written communication skills, with the ability to prepare clear and precise technical reports.
 </li>
 <li>
 Project management and organizational skills.
 </li>
 <li>
 Attention to detail and commitment to quality and safety.
 </li>
 <li>
 
 Languages:
 
 B2-C1 English. The usual working language will be English.
 </li>
 <li>
 Availability to travel abroad based on project demands.
 </li>
 </ul>
 
 
</div>

HV Electrical Engineer

GE Vernova

<div>
 
 Job Description Summary
 
 
 
 Control engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation.
 
 
 Impacts departmental operations and responsible for Tendering/execution.
 
 
 The candidate shall execute with association of workgroups, where applicable, in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning.
 
 
 The current role is expected to deliver ITO/OTR for HVDC&amp;AC Grid projects. Strong fundamental competency on projects on HVDC,EHV/HV Designs of Grid substation (AIS &amp; GIS) is pre-requisite.
 
 
 
 Job Description
 
 
 
 
 Roles and Responsibilities:
 
 
 
 <ul>
 <li>
 Protection coordination design and validation, control, protection, and sequencing strategy specifications, parameters tuning to meet grid stability criteria specified in customer technical specifications.
 </li>
 <li>
 Defining control system requirements for the software architecture, development, and verification
 </li>
 <li>
 Performing PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling, and verification, Prepare RSCAD model and perform study on Real Time Digital Simulator (RTDS) model FACTS project.
 </li>
 <li>
 Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification, dynamic performance studies using both offline and online simulation tools
 </li>
 <li>
 Design and develop substation control philosophies, protection single-line diagrams (SLD), as well as control and protection, and SCADA systems, auxiliary supply systems, and associated equipment.
 </li>
 <li>
 Develop and implement control and protection schemes for substation systems, including engineering BOQ, drawings, calculations, and technical specifications for both tender and execution stages.
 </li>
 <li>
 Collaborate with other functions to integrate control and protection systems into overall project designs.
 </li>
 <li>
 Strong understanding of electrical power systems, including generators, transformers, switchgear, and transmission lines.
 </li>
 <li>
 Ability to use control and protection software tools such as relay coordination software, and simulation programs.
 </li>
 <li>
 Deploy Engineering tools (CAD, PDM/DMS) as per project requirements.
 </li>
 <li>
 Knowledge of various protection schemes including overcurrent, differential, distance, and busbar protection.
 </li>
 <li>
 Ability to analyze and interpret relay settings, coordination curves, and fault records.
 </li>
 <li>
 Excellent problem-solving skills and the ability to troubleshoot complex electrical issues.
 </li>
 <li>
 Effective communication and teamwork skills to collaborate with internal and external stakeholders.
 </li>
 <li>
 Integrate EHS requirements based on project Strategy and deploy HAZID (Hazard identification) sessions at different project phases.
 </li>
 <li>
 Engineering management skills to handle engineering tasks, timelines, and resources efficiently.
 </li>
 <li>
 Deliver high technical quality of GE&rsquo;s proposals in LV Secondary side including processes &amp; programs that make the proposals more accepted (compliant or clarified), effective, and cost competitive to the customer with reduced overall-performance risk.
 </li>
 <li>
 Responsible for technical proposal accuracy including technical specifications &amp; clarifications/ assumptions/ exceptions, quantifying design and deliverables, installation work scope definition, cost allocation, bill of materials, and estimation of engineering, installation and testing/commissioning based on customer specifications and/or industry standards (IEEE, NESC, ANSI, NEMA, IEC, etc.), sourcing, and historical data.
 </li>
 <li>
 Perform basic studies in LV Secondary side and necessary to verify proper specification and design of proposed solutions.
 </li>
 <li>
 Provide technical support to create subcontractors and power equipment bid packages.
 </li>
 <li>
 Design and implement methodologies, templates, and libraries that provide the most accurate cost estimates with the least amount of engineering effort for a given customer scope.
 </li>
 <li>
 Write technical specifications for LV and Control/Protection and services, working with PM&rsquo;s &amp; Sourcing to manage quotes and vendor responses.
 </li>
 <li>
 Work with the Proposal Manager, Engineering team, and assigned multi-discipline engineers to provide up to full &ldquo;Engineer, Procure, &amp; Construct&rdquo; estimates for HV Substations, conventional utility, industrial, &amp; renewable substations, P&amp;C and equipment programs, Systems &amp; Communications projects, and BOP projects including FACTS, HVDC Segments
 
 
 </li>
 </ul>
 
 Required Qualifications
 
 
 
 <ul>
 <li>
 Bachelor of Electrical Engineering or relevant educational degree.
 </li>
 <li>
 Fluency in English is mandatory
 </li>
 <li>
 At least 3 years experiences on substation integration design, with minimum 5 years experiences in substation protection, control and auxiliary system design.
 </li>
 <li>
 Power system behaviors and application of protection to power systems.
 </li>
 <li>
 Protection, Control and interlocking schematic, cubicle layout design, manufacturing and testing. Relevant IEC/IEEE standards for substation design.
 </li>
 <li>
 Experience in modelling of converters for FACTS/HVDC/ drives is considered as an advantage.
 </li>
 <li>
 Knowledge of RTDS/RSCAD will be an added advantage.
 </li>
 <li>
 Knowledge of waveform and fault analysis
 </li>
 <li>
 Able to interpretate and work with HVDC System and plant modelling in electromagnetic transient tools like PSCAD, RSCAD, EMTP-RV etc. including undertaking Dynamic Performance Studies and Protection co-ordination.
 </li>
 <li>
 Sound knowledge of Transmission and Distribution protection, control, and auxiliary products. Familiar with substation automation system interfaces.
 </li>
 <li>
 Good command of secondary engineering tools (AutoCAD, Engineering Base).
 </li>
 <li>
 Experience with project risk management, financial processes, and global tendering requirements.
 </li>
 <li>
 Familiar with project technical management processes, preferably in a multi-disciplinary team&rsquo;s context with multiple interfaces
 </li>
 <li>
 First experience in managing subcontracted design work package (preferably externally)
 </li>
 <li>
 Technical leadership and mentoring good technical communication skills.
 </li>
 <li>
 Strong interpersonal skills
 
 
 </li>
 </ul>
 
 Desired Qualifications
 
 
 
 <ul>
 <li>
 Experience in technical problem solving.
 </li>
 <li>
 Ability to deliver under pressure in a dynamic, fast-paced environment with a problem-solving mindset and attention to detail.
 </li>
 <li>
 Willingness to travel globally and work in diverse environments.
 </li>
 <li>
 Able to work to deadlines with high quality, sense of urgency and delivery.
 
 
 </li>
 </ul>
 
 
 
 Additional Information
 
 
 
 
 
 
 Relocation Assistance Provided:
 
 No
</div>

Control and Protection Engineer

<div>
 
 Job Description Summary
 
 
 
 
 Job Description
 
 
 
 The
 
 Lead Secondary Engineer
 
 is the technical guarantor of the proper performance of design works conducted in his/her field of activity, in matter of committed design budget (man days), deadline and Quality, in line with Customer expectation, while promoting ease of installation, operation and maintenance of the system.
 
 
 As a High Voltage Substation Control, protection &amp; low voltage system designer Engineer, your main responsibility is to design, be part of the design of the design of a high-voltage &amp; HVDC substations, ensuring their reliability, efficiency, and compliance with industry standards, protection standard, and regulations. Collaboration with other engineers and support for project documentation and continuous improvement initiatives are also key aspects of this role.
 
 
 He/she plans basic and detailed design activities, manages &amp; oversees detailed execution progress, coordinates delivery of required engineering documentation for procurement, manufacturing and site erection associated to concerned activity, based on Customer specifications and requirement, and internal standards.
 
 
 He/she coordinates elaboration of documents done internally or through subcontracting.
 
 
 
 A Lead Secondary engineer has the capacity to manage design packages integrated in &ldquo;Full set&rdquo; projects according to PMH
 
 
 
 With an important customer in terms of secured and potential contracts or target market. That constitutes a major financial, technical and or commercial risk &amp; opportunities The impact of the project will have a significant effect on the Business unit Operating within an (inter)national environment with many complex internal and suppliers&rsquo; interfaces
 
 
 
 Key Missions Of The Lead Secondary Engineer
 
 
 
 Project management
 
 
 <ul>
 <li>
 scope of work &amp; time schedule
 </li>
 <li>
 Establish, based on tender and contract analysis, and project strategy, the list of documents to produce for his/her field of activity
 </li>
 <li>
 Evaluates with PEM or PM engineering workload and deliverables dates for concerned package, and commits to such budget in man days and in time delivery
 </li>
 <li>
 Time delivery mastering
 </li>
 <li>
 Ensures on-time delivery of design, including Partner documents, to stakeholders with suitable quality
 </li>
 <li>
 Anticipate and mitigate delivery issues and recommend changes
 </li>
 <li>
 Lead &amp; coordinate his/her design team
 </li>
 <li>
 Manage and monitor detailed execution progress and short-term plan
 </li>
 <li>
 Request from PEM or PM required technical coordination meetings with partners or key suppliers if &amp; when appropriate, to synchronize respective designs
 </li>
 <li>
 Give necessary input for management / monitoring detailed execution progress and short-term plan
 </li>
 <li>
 Resources
 </li>
 <li>
 On monthly basis, measure design physical progress on relevant studies, and provides PEM with relevant data for evaluation of ETTC
 </li>
 <li>
 Manage design time spent in man-hours on relevant activities
 
 
 </li>
 </ul>
 Project strategy &amp; risk management
 
 
 <ul>
 <li>
 Follows &amp; implements project strategy
 </li>
 <li>
 Highlights scope or design changes (data for claims, VO..)
 </li>
 <li>
 Informs PEM / PM of design issues all along project execution and propose range of solutions for decision; follow solutions agreed up to resolution
 </li>
 <li>
 Updates risk assessment related to engineering &amp; applies mitigation plan when required
 </li>
 <li>
 Pro-actively generate and manage opportunities
 
 
 </li>
 </ul>
 Customer relationship
 
 
 <ul>
 <li>
 Analyse customer technical requirements
 </li>
 <li>
 Ensures compliance to customer requirements
 </li>
 <li>
 Represents customer interests in the design decisions at PM request
 </li>
 <li>
 Manage customer comments
 </li>
 <li>
 Attend Customer technical meetings, upon PEM or PM request
 </li>
 <li>
 Coordinate with Partners coordination regarding customer technical comments on their scope
 
 
 </li>
 </ul>
 Document &amp; configuration management
 
 
 <ul>
 <li>
 Manages &amp; tracks evolution of input data
 </li>
 <li>
 Track customer comments and answers, along with document resubmission
 </li>
 <li>
 Manage return status of project documentation (approved, comments, resubmit, rejected)
 </li>
 <li>
 Ensures traceability from Customer requirements to equipment specifications
 </li>
 <li>
 Ensures conformance of material with specification &amp; documentation
 </li>
 <li>
 Tracks &amp; manages identified or potential deviations
 </li>
 <li>
 Manages evolution of customer requirements &amp; associated impacts
 
 
 </li>
 </ul>
 Design expediting
 
 
 <ul>
 <li>
 Participates to issuance of technical specifications and basic document to enable procurement of main items and plant detailed design
 </li>
 <li>
 Prepares and or coordinates elaboration of document, calculation, Simulation, to validate technical options proposed to the customer
 </li>
 <li>
 Looks for cost optimization in all design phases and mainly during basic design
 </li>
 <li>
 Ensures technical consistency of design area and associated performance level
 </li>
 <li>
 Obtains or provides support to insure compliance to technical "state of the art" and applicable standards &amp; regulations
 </li>
 <li>
 Checks documents
 </li>
 <li>
 Provides technical assistance to sourcing upon request
 </li>
 <li>
 Prepares subcontracting files (Scope, Deliverables, Inputs, Schedule)
 </li>
 <li>
 Checks design subcontractor deliverables
 </li>
 <li>
 Organizes review meeting with subcontractors
 </li>
 <li>
 Contributes to OMM &amp; As-built issuance
 
 
 </li>
 </ul>
 Process &amp; Tools
 
 
 <ul>
 <li>
 Deploys Engineering tools (CAD, PDM/DMS,) as per strategy
 </li>
 <li>
 Defines with Engineering management the Project Design review plan
 </li>
 <li>
 Conducts design reviews following Engineering management instruction
 </li>
 <li>
 Propose co-engineering platform with partners when relevant
 </li>
 <li>
 Integrate EHS requirements based on project Strategy, and deploy HAZID (Hazard identification) sessions at different project phases
 </li>
 <li>
 Apply Design subcontracting process supported by PEM or PM
 </li>
 <li>
 Implement KPIs defined on engineering process for full set project
 </li>
 <li>
 Issue nonconformance reports (FAT, Site) as required
 </li>
 <li>
 Manage nonconformance reports upon issuance
 
 
 </li>
 </ul>
 Sourcing &amp; Procurement, Supplier/Partner management
 
 
 <ul>
 <li>
 Support Sourcing and Procurement in the definition of the Supplier&rsquo;s list according to the project strategy
 </li>
 <li>
 In line with general time schedule, participate to elaboration of supply request : specification &amp; BOQ
 </li>
 <li>
 Organize and follow transmission of required Supply Requests on time; coordinate any required updates
 </li>
 <li>
 Coordinate with relevant people the review of technical offers from suppliers and approve the technical evaluation for relevant activity
 </li>
 <li>
 Manage technical interface with sub suppliers &amp; partners, prepare input data , check consistency
 </li>
 <li>
 Request for technical coordination meetings with partners or key suppliers if &amp; when appropriate
 </li>
 <li>
 Follow design subcontracting process
 </li>
 <li>
 Ensure the technical follow up (review, comment, approval) of the supplier&rsquo;s documentations
 </li>
 <li>
 Support Procurement in the equipment ITP review and approval
 </li>
 <li>
 Support Procurement in the review of FAT procedure and participate to FAT, as per project FAT plan. and request resources function of project
 
 
 </li>
 </ul>
 Interface with Construction
 
 
 <ul>
 <li>
 Involve Construction teams on Design review to Perform constructability analysis
 </li>
 <li>
 Prepares site work: method statement; site modification
 </li>
 <li>
 Prepares information required for OMM for his/her field of activities
 </li>
 <li>
 Provides support to the site team to resolve technical issues and raise and close snag lists
 
 
 </li>
 </ul>
 Return of Experience &amp; Knowledge Capitalisation
 
 
 <ul>
 <li>
 Provide data &amp; inputs for project RoE
 </li>
 <li>
 Site/Design return of experience &amp; design validation
 </li>
 <li>
 Support functional knowledge capitalization for dedicated practice areas
 
 
 </li>
 </ul>
 Quality
 
 
 <ul>
 <li>
 Comply with Quality Procedures, work instructions and Processes defined at Unit, project level, and in EMH
 </li>
 <li>
 Report or resolve any non-conformances and process in a timely manner
 
 
 </li>
 </ul>
 Health and Safety
 
 
 <ul>
 <li>
 Implement design freeze and EHS in design
 </li>
 <li>
 Demonstrate EHS leadership and ensure Zero Deviation Plan is implemented within the team
 </li>
 <li>
 Sets the example by demonstrating the proper acts and actively observes work conditions and behaviors, giving constructive feedback and celebrating EHS effective prevention.
 </li>
 <li>
 Actively participates in defining corrective actions when work is unsafe or when an uncontrolled risk is observed.
 </li>
 <li>
 Routinely observes routines and behaviors of others and provides immediate feedback regarding unsafe behavior and celebrates achievements or safe behaviors.
 
 
 </li>
 </ul>
 Performance Measurement
 
 
 <ul>
 <li>
 Discipline provisional document list prepared and aligned with project time Schedule with achievable task duration
 </li>
 <li>
 Full set KPI&rsquo;s followed on monthly base
 </li>
 <li>
 Discipline Design reviews &amp; Gate reviews plan formalized and followed
 </li>
 <li>
 ROR integrates design part and Mitigation plan formalized and actions status identified (not started, ongoing, closed.)
 </li>
 <li>
 Design management tools strictly followed, and submission of coherent data
 </li>
 <li>
 Discipline workload plan updated on regular base
 </li>
 <li>
 Discipline Design hours mastered
 </li>
 <li>
 Design change process in place
 </li>
 <li>
 Discipline Interface sheets deployed and validated for the project
 </li>
 <li>
 No significant gap in scope and exchange of information between partners or main suppliers from our partners &amp; Suppliers
 </li>
 <li>
 No serious claim from main Suppliers
 </li>
 <li>
 Engineering platform in place when relevant, coordination meetings organized
 </li>
 <li>
 NCR system used for the discipline
 </li>
 <li>
 Discipline document to be attached to the OM&amp;M delivered on time
 </li>
 <li>
 Compliance to Quality processes and procedures and GE policies and procedures
 
 
 </li>
 </ul>
 Desired Profile and Experience
 
 
 <ul>
 <li>
 Technology Academic studies, Diploma of high education or equivalent education (electrical or mechanical, function of field of activity involved)
 </li>
 <li>
 Most suitable candidates will come from the technical stream
 </li>
 <li>
 5-8+ years engineering experience in the related activity/discipline, preferably in project &amp; EPC type environment in T&amp;D, Power Gen or Oil &amp;Gas industry, or 2 to 4 Medium Set projects in position of Lead Engineer
 </li>
 <li>
 Knowledge of Project organisation and engineering processes related to his/her scope of activity
 </li>
 <li>
 Experience of project technical management processes, preferably in a multi-disciplinary team&rsquo;s context with multiple interfaces
 </li>
 <li>
 Several experiences in managing externally subcontracted design work package of various sizes
 </li>
 <li>
 English working knowledge
 </li>
 <li>
 Experience in technical problem solving
 </li>
 <li>
 Knowledge of Transmission or Distribution industry
 </li>
 <li>
 Willingness to work in different locations for short or medium period and to travel worldwide.
 
 
 </li>
 </ul>
 
 
 
 Additional Information
 
 
 
 
 
 
 Relocation Assistance Provided:
 
 No
</div>

Lead Secondary Engineer

Greece WofSG

We are looking for experienced and motivated marine engineers to join the Engine Department on board luxury MSC Cruises vessels. As a 1st Engineer or 2nd Engineer, you will be responsible for the safe and efficient operation, maintenance, and repair of the ship&rsquo;s engine systems and machinery under the supervision of the Chief Engineer.Main Responsibilities<ul><li>Ensure proper operation and maintenance of all engine room equipment and auxiliary machinery</li><li>Monitor performance, fuel consumption, and technical parameters of propulsion and power systems</li><li>Plan and carry out maintenance activities according to the company&rsquo;s planned maintenance system (PMS)</li><li>Supervise engine crew and assign daily technical tasks</li><li>Maintain records, reports, and ensure compliance with company and international maritime safety standards</li><li>Assist in troubleshooting, repairs, and overhauls of machinery</li><li>Cooperate with deck and hotel departments to ensure smooth vessel operations</li></ul>Requirements<ul><li>Valid STCW certificates for the relevant rank (1st or 2nd Engineer)</li><li>Previous experience on cruise ships or passenger vessels preferred</li><li>Excellent technical and problem-solving skills</li><li>Good command of English (both spoken and written)</li><li>Strong sense of responsibility and teamwork</li><li>Valid medical certificate (in accordance with ILO/MLC standards)</li></ul>We Offer<ul><li>Competitive salary (paid monthly, in USD)</li><li>Full board and accommodation on board</li><li>International working environment and career growth opportunities within MSC Cruises fleet</li><li>Travel arrangements covered by the company</li></ul>Job Type: Full-timePay: From 200,000.00TRY per monthExperience:<ul><li>Engineer Officer : 1 year (Required)</li></ul>Language:<ul><li>English (Required)</li></ul>

1st Engineer / 2nd Engineer – Engine Department – Cruise Liner

KBR, Inc.

<div>
 
 Title
 
 
 
 UABOS Turkey LN: HVAC/ Building Maintenance Mech
 
 
 
 Belong, Connect, Grow, with KBR!
 
 
 
 
 Program Summary
 
 
 
 KBR supports the operational needs of U.S. armed forces at Mor&oacute;n Air Base in Spain and several bases in Turkey. Our services ensure smooth operations, allowing Air Force and government personnel to focus on their missions. We provide program management, civil engineering, morale, welfare, and recreation support, among other essential services. Awarded by the Air Force Installation Contracting Center, our contract spans a five-year base period with three one-year options, reflecting our commitment to excellence and operational support.
 
 
 
 Job Summary
 
 
 
 Primary responsibilities include recurring maintenance, troubleshooting, and repairs on chilled water systems, hot water heaters, boilers, HVAC package and split systems, air compressors, window units, freezer boxes, refrigerators, and other miscellaneous refrigeration equipment, plumbing systems, electrical systems, carpentry, painting and grounds maintenance
 
 
 
 Roles And Responsibilities
 
 
 
 <ul>
 <li>
 Responds to service calls and installation on a variety of HVAC systems.
 </li>
 <li>
 Performs tests and troubleshooting using various analog and digital test equipment, ohmmeters, ammeters, voltmeters, watt meters, transistor testers, oscilloscopes, signal generators, frequency meters, protective relays, and cable test equipment.
 </li>
 <li>
 Repairs and maintains computer-based systems that control and monitor a building&rsquo;s mechanical and electrical HVAC automation systems.
 </li>
 <li>
 Monitors for malfunctions to identify faulty equipment and conducts routine repairs of Building Automation system hardware to include disassembly, replacement, and troubleshooting of equipment.
 </li>
 <li>
 Prepares, updates, and maintains a variety of data forms, records, and reports.
 </li>
 <li>
 Complies with local and US electrical safety codes, standards, regulations, practices, and environmental laws.
 </li>
 <li>
 Read and interpret electrical and electronic schematic wiring diagrams, manufactures&rsquo; literature, and standard operating procedures.
 </li>
 <li>
 Use test equipment to trouble shoot basic AC/DC Theory, 1-phase/3-phase power, system protection, and electronic/electrical equipment.
 </li>
 <li>
 Use desktop and mobile devices to access Building Automation systems to perform equipment monitoring functions.
 </li>
 <li>
 Physical requirements include being able to lift 23 kilos, climbing ladders, extended sitting or standing, and working in normal and adverse weather conditions due to work requirements.
 </li>
 <li>
 Work with minimal supervision while meeting performance expectations
 </li>
 <li>
 Performs any other duties as assigned by supervisor. Will assist other craftsman in accomplishing their duties as directed by supervisor.
 </li>
 <li>
 Works common duty hours or emergency callbacks.
 
 
 </li>
 </ul>
 
 Basic Qualifications
 
 
 
 <ul>
 <li>
 Turkish Citizen
 </li>
 <li>
 Technical High School graduate/completed, department of HVAC/Refrigeration.
 </li>
 <li>
 English language proficiency at Level I (speaking, reading, writing, and comprehension).
 </li>
 <li>
 Must be capable of completing basic HVAC/Refrigeration courses in English.
 </li>
 <li>
 Possess a valid driver license (minimum &ldquo;B&rdquo; class).
 
 
 </li>
 </ul>
 
 Preferred Qualifications
 
 
 
 <ul>
 <li>
 Two-year HVAC College degree (&Idot;klimlendirme, So&gbreve;utma Y&uuml;ksekokulu),
 </li>
 <li>
 Boiler Operator License (SANAY&Idot; KAZANI &Idot;&Scedil;LETME BELGES&Idot;) will supersede in the first selection.
 </li>
 <li>
 Prior experience in the HVAC industry, with good plumbing skills including soldering and brazing.
 
 
 </li>
 </ul>
 All positions require the applicant to obtain and pass a medical physical that is certified by a doctor to include passing a colorblindness test.
 
 
 All positions require a current and favorable Turkish Security background check.
 
 
 All male candidates must have completed their military service.
 
 
 
 KBR Benefits
 
 
 
 Local Nationals (LN) personnel will receive benefits in accordance with the collective labor agreement (CLA) within the appropriate country location where they reside. KBR supports career advancement through professional training and development.
 
 
 
 R2112070
 
</div>

UABOS Turkey LN: HVAC/ Building Maintenance Mech

McFly Robot Teknolojileri

<div>
 ⚙️
 
 Gear Design Engineer / Mechanical Design Engineer (Reducer Systems)
 
 
 📍
 
 Ankara &ndash; Full-time / On-site
 
 
 
 🏢
 
 Mcfly Robot Technologies
 
 
 
 Position Summary
 
 
 At
 
 Mcfly Robot
 
 , Turkey&rsquo;s first domestic robot manufacturer, we are looking for a
 
 specialized mechanical engineer
 
 to design and develop the
 
 precision gear and reducer systems
 
 that form the heart of our industrial robots.
 
 
 This position reports directly to the
 
 Design Director
 
 and works closely with our mechanical R&amp;D team to create high-precision, low-backlash transmission systems for robotic applications.
 
 
 What Success Looks Like
 
 
 Success in this role means more than just calculating gears &mdash; it&rsquo;s about understanding
 
 manufacturability, durability, vibration, backlash, surface quality, and assembly tolerances
 
 together as one integrated system.
 
 
 You&rsquo;ll thrive if you can transform theory into practice, interpret simulation data, and collaborate closely with the production and quality teams to turn designs into real, working products.
 
 🧩
 
 Key Responsibilities
 
 <ul>
 <li>
 Design and development of Planetary, Harmonic and Cycloidal gear systems for robot joints
 </li>
 <li>
 Optimization of geometry, module, helix angle, and profile modifications for performance and efficiency
 </li>
 <li>
 Perform gear strength and lifetime calculations according to AGMA / ISO standards
 </li>
 <li>
 Prepare 3D models, assemblies, and technical drawings with detailed tolerance analyses
 </li>
 <li>
 Evaluate prototype and test results to improve design performance
 </li>
 <li>
 Collaborate with production, quality, and purchasing teams to ensure manufacturability and cost efficiency
 </li>
 <li>
 Conduct and interpret mechanical simulations (Ansys or equivalent) for verification and validation
 </li>
 </ul>
 🎓
 
 Qualifications
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in
 
 Mechanical Engineering
 
 or a related field
 </li>
 <li>
 Minimum
 
 3 years of experience
 
 in gear, reducer, or power transmission system design
 </li>
 <li>
 Advanced proficiency in
 
 3D CAD software
 
 (SolidWorks, Inventor, or similar)
 </li>
 <li>
 Practical knowledge of
 
 AGMA / DIN / ISO gear design standards
 
 </li>
 <li>
 Familiar with
 
 FEM analysis and mechanical simulation tools
 
 </li>
 <li>
 Understanding of manufacturing methods (CNC machining, grinding, heat treatment)
 </li>
 <li>
 Strong analytical thinking, attention to detail, and teamwork skills
 </li>
 <li>
 Good command of
 
 technical English
 
 (reading and writing)
 </li>
 </ul>
 💡
 
 About Mcfly Robot
 
 
 Mcfly Robot is
 
 Turkey&rsquo;s first domestic robot and reducer manufacturer
 
 , developing cutting-edge robotic systems from the ground up.
 
 
 Our multidisciplinary team of mechanical, electronic, and software engineers designs
 
 zero-backlash reducers, servo motors, and robotic arms
 
 entirely in-house.
 
 
 We aim to bring
 
 world-class robotics technology
 
 to life through local innovation and engineering excellence.
 
 🚀
 
 Why Join Us?
 
 <ul>
 <li>
 Be part of
 
 Turkey&rsquo;s most innovative robotics R&amp;D team
 
 </li>
 <li>
 Work on
 
 next-generation precision gear and motion systems
 
 </li>
 <li>
 Collaborative, engineering-driven culture that values creativity and expertise
 </li>
 <li>
 Career growth opportunities and performance-based development
 </li>
 </ul>
 
 🧠
 
 If you see gears not just as mechanical parts but as a form of engineering art &mdash; we want to meet you.
 
 
 
 📩 Apply via LinkedIn or send your CV to
 
 bekir.kurtulus@mcflyrobot.com
 
 
</div>

Dişli Tasarım Mühendisi / Gear Design Engineer

Qure.ai

<div>
 
 
 About the job
 
 
 
 
 Job Title:
 
 Site Reliability Engineer (Ankara, Turkey)
 
 
 
 Department:
 
 Engineering
 
 
 
 Location:
 
 Ankara, Turkey
 
 
 
 Years of Experience:
 
 4+ years
 
 
 
 Employment Type:
 
 
 
 
 Key Relationships
 
 : Technical Project Manager
 
 
 
 
 
 We are seeking a talented and experienced Site Reliability Engineer to join our team in Ankara, Turkey. This role has a dedicated focus on supporting projects in Turkey and the broader Middle East region. We need a versatile, energetic, and resourceful engineer who is both technically proficient and an excellent communicator. You will be responsible for ensuring the reliability, scalability, and performance of our software systems. You will collaborate with cross-functional teams to build and maintain a highly available infrastructure for our AI healthcare solutions.
 
 
 
 
 
 
 Key Responsibilities
 
 
 <ul>
 <li>
 Work closely with customers in the region to debug and solve deployment and support issues.
 </li>
 <li>
 Provide L1 and L2 support by monitoring system health, triaging alerts, and handling incidents.
 </li>
 <li>
 Build and optimize reliable services that enable swift and scalable product delivery.
 </li>
 <li>
 Automate environment setup and configuration for customer deployments across various platforms.
 </li>
 <li>
 Implement and maintain monitoring, alerting, and logging systems for proactive issue detection.
 </li>
 <li>
 Collaborate with engineering, DevOps, and security teams to ensure system integrity and compliance.
 </li>
 <li>
 Own communication for production issues with internal teams and external stakeholders.
 </li>
 <li>
 Continuously push the production standard forward and develop a customer-centric support culture.
 </li>
 <li>
 Support and troubleshoot configuration and environment setup issues across customer sites.
 </li>
 <li>
 Maintain system documentation, runbooks, and operational procedures to streamline support processes.
 </li>
 </ul>
 
 
 
 
 
 Required Skills and Qualifications
 
 
 <ul>
 <li>
 Fluency in both Turkish and English is required.
 </li>
 <li>
 Willingness and ability to travel domestically and internationally as required.
 </li>
 <li>
 Bachelor's degree in computer science, Engineering, or related field.
 </li>
 <li>
 4+ years of experience in SRE, DevOps, or technical support roles.
 </li>
 <li>
 Excellent technical troubleshooting and analytical skills.
 </li>
 <li>
 Proficiency with Linux environments, basic scripting, and containerization tools (e.g., Docker).
 </li>
 <li>
 Familiarity with monitoring/logging platforms like Datadog, ELK, Prometheus, or similar.
 </li>
 <li>
 Understanding of cloud infrastructure (preferably AWS) and basic networking concepts.
 </li>
 <li>
 Basic programming knowledge in any language.
 </li>
 <li>
 Demonstrated knowledge of SQL.
 </li>
 <li>
 Experience with FHIR (Fast Healthcare Interoperability Resources) standards.
 </li>
 <li>
 Strong communication skills, especially in client-facing scenarios.
 </li>
 <li>
 Ability to work independently within a remote.
 </li>
 <li>
 Ability to collaborate effectively with cross-functional teams across time zones.
 </li>
 </ul>
 
 
 
 
 
 At Qure.ai
 
 
 
 You will be part of a rapidly growing, innovative company that is making a significant impact on global healthcare. We offer a competitive salary, comprehensive benefits, and the opportunity to work alongside some of the best minds in the industry. Join our dynamic team for substantial professional growth and leadership opportunities in a supportive and fast-paced environment, where you have the chance to grow with a young and forward-thinking company.
 
 
 
 
 
 
 Inclusive workspace:
 
 
 
 https://wiki.qure.ai/share/2c7c172f-3650-4fbc-8ba6-10b10e166cc1
 
 
 
 
 
 
 By submitting your information and application, you confirm that you have read and agree to the Applicant Privacy Policy:
 
 
 
 https://www.qure.ai/applicant-privacy-policy
 
</div>

Site Reliability Engineer (Ankara, Turkey)

Explore 21+ Hv electrical engineer in Ankara this November. Find roles across top companies and apply now to boost your career.