sales executive Jobs in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar

sales executive

sales engineer Jobs in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar

sales engineer

sales manager Jobs in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar

sales manager

sales representative Jobs in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar

sales representative

inside sales engineer- fire commercial Jobs in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar

inside sales engineer- fire commercial

hv sales engineer

Aalco Group

<ul><li><b>Position:</b> Engineer &ndash; Sales &amp; Marketing (HV)</li><li><b>Location:</b> Doha, Qatar</li><li><b>Qualification:</b> B.Tech in Electrical Engineering</li><li><b>Experience:</b> Minimum 5 years in high-voltage equipment sales and marketing</li><li><b>Requirements:</b> Valid QID and NOC, immediate joining preferred</li></ul><p>Job Type: Full-time</p>

HV Sales Engineer

Al Dana Switchgear

<p>This is a full time on- site roll for an engineer -sales and marketing HV is located in Doha,Qatar.The primary responsibility of an Engineer &ndash; sales and marketing HV is to plan, implement and manage sales strategies for high voltage equipment whilst working closely with the technical department.A self motivated individual is desired who has a track record of sales in high voltage equipment and the ability to maintain and build customer relationship.</p><p>Qualifications:</p><p>Bachelor degree in Electrical Engineering</p><p>Minimum of 7 years of Demonstrated experience in sales and marketing of high voltage equipment is required</p><p>Experience with tendering ,Bid management ,and Quotation preparation is an advantage</p><p>Capable of supporting and communicating with technical and non &ndash; technical staff</p><p>Excellent communication ,presentation, Negotiation and analytical skills.</p><p>Strong organizational and time management skills.</p><p>Excellent customer service and relationship building skills.</p><p>Fluency in written and spoken skills in English is mandatory.</p><p>Job Type: Full-time</p>

Electrical Sales Engineer

GETP Group

<div><div>Cable Testing &amp; Service Engineer<br>
<br>
<b>Job Purpose:</b> We are seeking a practical and experienced specialist in cable handling, end preparation, and testing specifically for offshore renewable energy Medium and High Voltage (MV/HV) Cables (66V+). As an HV/MV Cable Engineer, your responsibilities include:</div><ul><li><b>
Cable Fault location, Cable route tracing.</b></li><li><b>
Creation, verification, and approval</b> of project manufacturing specifications used to handle and test HV power cables.</li><li>
Being the <b>owner and creator</b> of the technical governance related to HV power cable handling and testing rules and policies, adhering to internal and international standards.</li><li>
Developing <b>standard operating procedures</b> used by Operators when handling, preparing, or testing cable products.</li><li>
Specifying <b>safe termination and testing requirements</b> aligned with internal TFMC standards and relevant IEC and EN cable standards.</li><li>
Conducting various tests, including but not limited to <b>conductor resistance, partial discharge, high voltage AC, insulation resistance, and time domain reflectometry</b>.</li><li>
Supporting risk assessments of all testing activity on-site related to Power Cables.</li><li>
Collaborating closely with the CAPEX and Industrialization teams to support the development and continuous improvement of HV Cable manufacture at the Newcastle site.</li><li>
Engaging in close collaboration with Umbilical, Cable, and Hardware Design Engineers to ensure lessons learned from manufacturing, end termination, and preparation of HV Cables feed into the bid, design, and procurement processes1.</li></ul><div><br>
<b>
Educational Background</b>:</div><ul><li>
A <b>bachelor&rsquo;s degree</b> in electrical engineering, power systems, or a related field is typically required. Some positions may prefer a master&rsquo;s degree or higher.</li><li>
Relevant coursework in power systems, high-voltage engineering, and cable design is beneficial.</li></ul><div></div><div><b><br>
Technical Skills</b>:</div><ul><li><b>
High-Voltage Cable Knowledge</b>: A deep understanding of MV/HV cables, their construction, insulation materials, and terminations.</li><li><b>
Testing Techniques</b>: Proficiency in cable testing methods such as TDR, SIM, MIM, and ICM.</li><li><b>
Electrical Safety</b>: Knowledge of safety protocols when working with high-voltage equipment.</li><li><b>
Electromagnetic Compatibility (EMC)</b>: Understanding of EMC principles related to cable systems.</li><li><b>
CAD Software</b>: Familiarity with computer-aided design (CAD) tools for cable routing and termination design.</li></ul><div></div><div><b><br>
Certifications</b>:</div><ul><li><b>
Certified Cable Splicer</b>: Some organizations may require certification in cable splicing and termination.</li><li><b>
Project Management Certifications</b>: PMP (Project Management Professional) or similar certifications are valuable for managing cable projects.</li></ul><div></div><div><b><br>
Experience</b>:</div><ul><li><b>
Industry Experience</b>: Prior work experience in cable handling, testing, or power systems is essential.</li><li><b>
Field Work</b>: Practical experience in cable installation, maintenance, and fault location.</li><li><b>
Project Management</b>: Exposure to project management, especially related to cable installations.</li><li>
</li></ul><div><b>
Soft Skills</b>:</div><ul><li><b>
Analytical Thinking</b>: Ability to analyze cable data, test results, and troubleshoot faults.</li><li><b>
Communication</b>: Effective communication with cross-functional teams, contractors, and stakeholders.</li><li><b>
Attention to Detail</b>: Precision is crucial when handling high-voltage cables.</li><li><b>
Problem-Solving</b>: Creative problem-solving skills for fault localization and resolution.</li></ul><div></div><div><b><br>
Professional Development</b>:</div><ul><li>
Stay updated with industry trends, attend workshops, and participate in relevant conferences.</li><li>
Consider joining professional organizations like the <b>Institute of Electrical and Electronics Engineers (IEEE)</b>.</li></ul></div>

Cable Testing & Service Engineer

SFAI Qatar

<p><b>Key Responsibilities:</b></p><ul><li>Oversee design and implementation of HV systems (substations, switchgear, transformers).</li><li>Review drawings, specs, protection studies, and vendor documents.</li><li>Participate in HAZOP, HAZID, SIL, and 3D model reviews.</li><li>Manage subcontractor performance and fabrication quality.</li><li>Support site installation, inspections, and commissioning activities.</li><li>Handle technical queries, design changes, and documentation.</li><li>Contribute to schedule tracking, risk mitigation, and reporting.</li><li>Interface with Operations, Maintenance, and external authorities.</li><li>Ensure HSE and quality compliance throughout the project lifecycle.</li></ul><p><b>Qualifications:</b></p><ul><li>Bachelor&rsquo;s in Electrical Engineering (mandatory).</li><li>10+ years relevant experience; 5+ in high-voltage EPC/EPCC projects.</li><li>Strong knowledge of IEC standards, HV systems, and multidisciplinary coordination.</li><li>Professional certification in engineering or project management (preferred).</li></ul><p>Job Types: Full-time, Permanent</p><p>Application Question(s):</p><ul><li>Do you have bachelor&rsquo;s degree in electrical engineering?</li></ul><p>Experience:</p><ul><li>Senior Project Engineer &ndash; High Voltage: 10 years (Preferred)</li><li>r EPC/EPCC projects involving high-voltage systems: 5 years (Preferred)</li></ul><p>Language:</p><ul><li>English (Preferred)</li></ul><p>License/Certification:</p><ul><li>QID (Preferred)</li></ul>

Sr. project Engineer High Voltage

Management Solutions International (MSI)

<p></p><div><div><div><div><div><div><div><div><div>Location</div></div>
<div><div>Doha, Qatar</div></div>
</div></div></div><div></div><div><div><div><div><div>Experience</div></div>
<div><ul><li></li></ul></div>
</div></div></div><div></div><div><div><div><div><div>Job Type</div></div>
<div><div>Recruitment</div></div></div></div></div></div></div></div></div>
<br><div><div><div>Job Description
</div></div><div><p><b>Job Title: Testing &amp; Maintenance Engineer &ndash; Electrical (Onshore)</b></p>
<p><b>Location:</b> Qatar<br>
<b>Industry:</b> Oil &amp; Gas<br>
<b>Experience</b>: 8 to 10 years in Oil and Gas industry</p>
<p><b>About the Role</b></p>
<p>We are seeking an experienced <b>Testing &amp; Maintenance Engineer (Electrical)</b> to join our onshore operations team. The ideal candidate will have strong technical expertise in electrical installation, maintenance, and testing of transformers, switchboards, and other electrical systems within petrochemical, refinery, and oil &amp; gas environments.</p>
<p><b>Key Responsibilities</b></p>
<ul><li><p>Perform testing, installation, and maintenance of electrical systems including Transformers, MV/LV Switchboards, A/C, UPS, and DC UPS.</p>
</li><li><p>Supervise cable tray installation, LV/MV/HV cable laying &amp; termination, and grounding systems (underground &amp; above ground).</p>
</li><li><p>Conduct onshore technical work such as relay/breaker testing, equipment function testing, and material inspection at workshops or designated company locations.</p>
</li><li><p>Review and interpret electrical drawings, schematics, datasheets, specifications, and test reports.</p>
</li><li><p>Ensure compliance with international electrical standards and company quality procedures.</p>
</li><li><p>Carry out testing of relays/control panels, microprocessor &amp; solid-state relays through primary and secondary injection testing.</p>
</li><li><p>Perform studies and setting calculations for Siemens, GE, and ABB protection relays.</p>
</li><li><p>Conduct transformer testing (SFRA, Tan Delta, Vector Group, etc.) and CT/VT testing using OMICRON and other advanced test instruments.</p>
</li><li><p>Execute high-voltage testing of MV/HV cables, pre-commissioning, commissioning, and energization tests.</p>
</li><li><p>Develop maintenance strategies for offshore electrical systems and support maintenance activities.</p>
</li><li><p>Verify MTOs as per project drawings and prepare technical documentation, work packs, and progress reports.</p>
</li><li><p>Support project management functions including planning, coordination, and progress monitoring.</p>
</li></ul><p><b>Required Qualifications &amp; Experience</b></p>
<ul><li><p><b>Education:</b> Bachelor&rsquo;s Degree (or equivalent) in Electrical Engineering.</p>
</li><li><p><b>Experience:</b> Minimum <b>8&ndash;10 years</b> in testing, maintenance, and installation of electrical systems in petrochemical/refinery/oil &amp; gas industries.</p>
</li><li><p>Hands-on experience with test equipment such as CMC-256, Freja 549, CPC-100, Power Analyzer, IR Tester, VIDAR, PD Tan Delta, VLF &amp; HV Hipot Kits.</p>
</li><li><p>Proficient in project documentation, quality assurance, and electrical standards compliance.</p>
</li><li><p>Excellent command of <b>English</b> (verbal &amp; written).</p>
</li><li><p>Physically fit and willing to work offshore if required.</p>
</li></ul><p><b>Preferred Qualifications</b></p>
<ul><li><p><b>COMPEX Certification</b> and/or <b>UPDA Grade-A</b> certification.</p></li></ul></div></div><p></p>

R159 ELECTRICAL TESTING & MAINTENANCE ENGINEER - ONSHORE

<div><div>Relay Protection Engineer<br>
<br>
<b>Key Duties/Responsibilities:
</b><br>
<b>Operational Expertise:</b></div><ul><li>
Provide conceptual and preliminary design, option analysis, scope and specification of substation automation and control systems.</li><li>
Protection system design development, device evaluation and application.</li><li>
Development and maintenance of secondary system design standards.</li><li>
Specific protection system coordination and functions for HV transmission network installations.</li><li>
Standard and non-standard protection system design and construct application and solutions for all HV power system network assets. Assist in co-ordinating work programs for delivery of non-standard solutions.</li><li>
Protection equipment specification and operation instruction to design and construction, operations, and maintenance.</li><li>
Calculate and review specific protection and control settings, configurations, testing and commissioning procedures across all protection types.</li><li>
Perform engineering design review and validation.</li><li>
Compliance of new and existing protection system design and testing and recommend changes.</li><li>
Development of protection design philosophy and practices.</li><li>
Implement ElectraNet substation protection designs compliant to IEC 61850 substation communication network standard.</li><li>
Integration of standard substation automation system equipment, telecommunication, remote engineering access (Opswan), condition monitoring equipment and NGM.</li><li>
Provide specialist technical support to other groups within ElectraNet.</li><li>
Identify and implement improvements to design and processes.</li><li>
Plan engineering project deliverables with stakeholders.</li><li>
Perform and report on engineering investigations and risk assessments.</li><li>
Foster technical innovation, acquisition of expertise and support a continuous improvement culture.</li><li>
Contribute to the development of other engineers.</li><li>
Apply guidelines, processes and systems to lead the way of best practice.</li><li>
Contribute to network security obligations related to compliance with legislative requirements and regulations.</li><li>
Other duties as directed commensurate with your skills and classification.</li></ul><div><br>
<b>
Qualifications:</b></div><ul><li>
Degree in Electrical Engineering or equivalent.</li></ul></div>

Relay Protection Engineer

aramco

<div>
 <p>
  <strong>
   <em>
    JOB TO BE BASED IN SAUDI ARABIA
   </em>
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   LEAD GAS INSULATED SWITCHGEAR ENGINEER (GIS)
  </strong>
 </p>
 <p>
  <strong>
   Overview:
  </strong>
 </p>
 <p>
  We are seeking a Gas Insulated Switchgear Engineer ( GIS ) to join the Power Systems Projects &amp; Technical Support Department (PSP&amp;TSD).
 </p>
 <p>
  <br/>
 </p>
 <p>
  PSP&amp;TSD is responsible for providing and managing highly technical and specialized engineering services to support the safe and reliable operation of Saudi Aramco electrical power system generation, transmission and distribution networks.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   <em>
    As a Gas Insulated Switchgear Engineer you will be responsible to provide the technical support for the company with regards to designs, standards, commissioning, maintenance, operation, investigations, etc.
   </em>
  </strong>
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Key Responsibilities:
  </strong>
 </p>
 <p>
  As the successful candidate, you will be required to perform the following:
 </p>
 <ul>
  <li>
   <strong>
    To evaluate technical documents for design, engineering, manufacture, inspection, testing and performance of SF6 Gas Insulated Metal-enclosed Switchgears (GIS).
   </strong>
  </li>
  <li>
   <strong>
    Perform Root Cause Analysis on all critical equipment failures.
   </strong>
  </li>
  <li>
   <strong>
    Continuous review of the HV equipment maintenance programs to identify improvements to ensure the HV asset's safe and reliable operation.
   </strong>
  </li>
  <li>
   <strong>
    Support maintenance agency as required in reviewing spare parts list of existing equipment.
   </strong>
  </li>
  <li>
   <strong>
    Provide technical expertise on troubleshooting failures, repairs, and evaluating if the equipment is designed to meet its intended or existing service conditions.
   </strong>
  </li>
  <li>
   <strong>
    Provide technical engineering input on repair details and offers onsite technical support, especially for critical equipment for the process.
   </strong>
  </li>
  <li>
   <strong>
    Provide engineering input for work packages to ensure Saudi Aramco standards and material specifications are followed.
   </strong>
  </li>
  <li>
   <strong>
    Represent the organization in industry and profession organizations, users' group, which address or govern electrical codes and standards.
   </strong>
  </li>
  <li>
   <strong>
    Review company standards and be familiar with international standards.
   </strong>
  </li>
  <li>
   <strong>
    Possess strong technical training, speaking, writing, and customer service skills.
   </strong>
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Minimum Requirement:
  </strong>
 </p>
 <p>
  As the successful candidate you will hold a
  <strong>
   Bachelor Degree in Electrical Engineering
  </strong>
  , MSc is preferred.
 </p>
 <ul>
  <li>
   You will have a
   <strong>
    minimum of 20 years of experience
   </strong>
   in the area of GIS equipment specialism; such as: contribution in international conferences as GIS specialist or worked at leading GIS Manufacturers.
  </li>
  <li>
   Professional Engineer certification; such as: Chartership or PE, Preferred
  </li>
  <li>
   Have
   <strong>
    technical design level insight in GIS Technology of minimum 69kV and higher
   </strong>
   .
  </li>
  <li>
   <strong>
    Demonstrate an active role during in GIS commissioning as part of a projects or as Original Equipment Manufacturer (OEM).
   </strong>
  </li>
  <li>
   <strong>
    Familiarity with Factory Acceptance Test (FAT) in a leading capacity.
   </strong>
  </li>
  <li>
   <strong>
    Demonstrate depth of compliance with manufacturing standards such as IEC.
   </strong>
  </li>
  <li>
   <strong>
    In-depth knowledge, experience, and recognition as a switchgear specialist include membership of international engineering bodies and contribution at international conferences.
   </strong>
  </li>
  <li>
   <strong>
    Capable of assimilating and quickly applying newly acquired technical information.
   </strong>
  </li>
  <li>
   <strong>
    Ability to multi-task and manage changing priorities and seek opportunities to improve results and processes proactively, contributing to the goals, safety, and profitability of the company.
   </strong>
  </li>
  <li>
   Possess strong technical training, speaking, writing, and customer service skills.
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   <em>
    REGRET ONLY SHORTLISTED CANDIDATES WILL BE CONTACTED
   </em>
  </strong>
 </p>
 <p>
 </p>
</div>


LEAD GAS INSULATED SWITCHGEAR (GIS) ENGINEER (To Be Based in Saudi Arabia)

Explore 1159+ Hv sales engineer in Room Dining Jobs In Doha Qatar Jobs In Doha Qatar this November. Find roles across top companies and apply now to boost your career.