manufacturing test engineer

Joby Aviation

<div>Company Overview:
<div>
Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service.</div>
Overview:

Joby is looking for a software engineer with experience in electronics manufacturing and software development. Ideal candidates would contain both strong Python skills, electronics test equipment experience, and a firm understanding of the software/hardware interface. 
As a Senior Software Engineer for Test Infrastructure, you will develop software that enables the automation of electronics manufacturing tests in an aerospace production environment. You will manage a Python monorepo of microservices that spans test-execution services, hardware-in-the-loop (HIL) integrations, and CI/release tooling. Beyond code, you are expected to drive technical strategy and cross-team collaboration, turning ambiguous test requirements into a deterministic, automated reality. 
Location: San Carlos, CA. Please note that working remote will not be considered.
Responsibilities:
<ul><li>Build unique new test stations while providing high-tier support for existing stations, ensuring the production line remains deterministic and FAA-compliant.</li><li>
Design and maintain Python test software and HIL (Hardware-in-the-Loop) infrastructure that gates the production and certification of Joby&rsquo;s avionics systems.</li><li>
Drive cross-functional discussions with software, hardware, and manufacturing engineers to translate complex manual acceptance procedures into reliable, fully automated software.</li><li>
Maintain database schemas and ELT pipelines to store mission-critical test results for downstream aerospace analytics.</li><li>
Full-Stack delivery of efficient UIs and robust backend services within an Agile/Sprint environment, deploying via CI/CD pipelines.</li><li>
Understanding of networking fundamentals (TCP/IP, UDP, Routing) to design robust communication paths between test stations and aircraft hardware, ensuring low-latency and reliable data transport.</li><li>
Build async Python services and hand-rolled drivers to interface with test equipment via a deep stack of protocols, including gRPC, WebSockets, Modbus TCP, and SCPI/VISA.</li></ul>
Required:
<ul><li>University degree in computer science, computer engineering or electrical engineering and 7+ years full time industry experience. An advanced degree and 5+ year of practical experience will also be considered.</li><li>
Experience operating electronics test equipment (multimeters, power supplies, data acquisition devices).</li><li>
Experience with networking, Modbus, I2C, and SCPI/VISA protocols and writing drivers for electronics test equipment.</li><li>
Expertise in Python, specifically with asyncio for high-concurrency hardware control and an exposure to other languages such as: C++, C, Go, SQL.</li><li>
Demonstrable experience in software development for production test equipment in a manufacturing environment.</li><li>
Experience designing and implementing test strategies to assess the reliability of automation frameworks and libraries.</li><li>
Mature understanding of Continuous Integration, Continuous Development (CI/CD) and DevOps tools.</li><li>
Ability to work closely with the software development team, and teams in other domains, gathering requirements and feedback.</li></ul>
Desired:
<ul><li>Experience building full-stack applications, including efficient web-based UIs and robust backend services using FastAPI and SQL.</li><li>
Positive attitude and self-motivated work ethic with an openness to feedback.</li><li>
Ability to work effectively as a team member in a geographically distributed team.</li><li>
Willingness to be flexible and learn new technologies.</li><li>
Ability to adjust quickly in a fast-paced environment.</li><li>
Provide mentorship and technical guidance to the team, promoting high engineering standards through constructive code reviews and a collaborative, teaching-oriented approach to problem-solving.</li></ul>
Additional Information:
<div><div><div><div>
Compensation at Joby is a combination of base pay, bonus equity, and Restricted Stock Units (RSUs). The target base pay for this position is $145,300 - $201,200 yr. The compensation package will be determined by job-related knowledge, skills, and experience.</div><div> 
Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.</div><div></div><div> 
Joby is an Equal Opportunity Employer</div></div></div></div></div>

Senior Software Engineer, Manufacturing Test Automation

ursa major

<div><div>Berthoud, Colorado</div><div><div> 

The future of aerospace and defense starts here. 
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
</div>
We&rsquo;re seeking an accomplished, fast-learning individual to join our team as a Senior Flight Test Engineer, driving Ursa Major&rsquo;s mission and supporting both internal and customer-driven flight campaigns. This senior-level role is critical in ensuring success from product delivery and contract execution through to the final stages of flight operations, while mentoring junior engineers and leading project teams.

As a Senior Flight Test Engineer, you&rsquo;ll serve as the on-site technical authority regarding Ursa Major&rsquo;s hypersonic products, taking ownership of system integration, operations, testing, and flight for customer programs, and contributing significantly to the strategy, development, and execution of Ursa Major&rsquo;s own flight initiatives. This position offers a unique opportunity to work hands-on with cutting-edge technology, solve complex challenges, and act as a critical liaison between customers and internal teams, while also providing technical leadership and direction to others.

Responsibilities:
<ul><li>Lead integration, checkouts, and static fire testing of hypersonic vehicles and propulsion systems</li>
<li>Champion Test-Like-You-Fly practices during ground operations at our Berthoud campus and during range operations</li>
<li>Author, review, and execute procedures for checkouts, propellant load, and hotfire operations</li>
<li>Lead and support ground and flight operations with a strong emphasis on safety for Ursa Major&rsquo;s missions, including overseeing other test engineers, operators, and technicians</li>
<li>Guide data review, failure investigations, and sequence preparation for static fire testing and flight</li>
<li>Coordinate with test ranges and external agencies to plan and execute complex flight test campaigns while complying with regulatory and range safety requirements</li>
<li>Lead customer status updates and milestone reviews for both programmatic and technical content</li>
<li>Present and provide technical review in customer meetings, integration reviews, and internal technical deep-dives</li>
<li>Serve as a subject matter expert on Ursa Major&rsquo;s hypersonic vehicle and propulsion systems</li>
<li>Troubleshoot complex system and component hardware issues in the field, developing effective solutions with the Ursa team and customer, and lead implementation efforts</li>
<li>Mentor and provide technical guidance to less experienced team members; contribute to best practices and training resources</li>
</ul>Required Qualifications:
<ul><li>B.S. in Engineering</li>
<li>5+ years of relevant experience in aerospace systems integration, test, or flight operations</li>
<li>Demonstrated team leadership and/or project management experience in technical environments</li>
<li>Passion for developing customer relationships and ensuring mission success</li>
<li>Unwavering attention to detail, curiosity, and relentless in resolving complex problems</li>
<li>Substantial hands-on experience with aerospace hardware and test environments</li>
<li>Comfortable working in a fast-paced, startup environment, adapting to evolving priorities</li>
<li>Willing to spend 30% of the year on travel for multi-week test and flight campaigns</li>
</ul>Desired Experience:
<ul><li>Master&rsquo;s degree in engineering</li>
<li>Technical expertise in liquid rocket engine manufacturing, integration, or test</li>
<li>Technical expertise in vehicle stage systems and propulsion fluid systems</li>
<li>Direct flight or test operational experience</li>
<li>Deep understanding of aerospace industry standards and requirements</li>
<li>Experience in systems engineering and requirements verification</li>
<li>Experience in a mission assurance role</li>
<li>Significant leadership in customer-facing and/or multi-disciplinary technical teams</li>
<li>Experience managing and leading engineering teams through test campaigns and complex projects</li>
<li>Experience working with range requirements for flight test campaigns</li>
<li>Experience mentoring, coaching, or training other engineers</li>
</ul>
Colorado law requires us to tell you the base compensation range of this role, which is $121,000 &ndash; $150,000, determined by your education, experience, knowledge, skills, and abilities. What we can&rsquo;t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.

Classification: Full-time Exempt<div><div> 
<div>
Benefits Include: (Please note, Interns are not eligible for benefits)
<ul>
<li>Unlimited PTO &ndash; Vacation, Sick, Personal, and Bereavement</li>
<li>Paid Parental and Adoptive Leave</li>
<li>Medical, Dental and Vision Insurance</li>
<li>Tax Advantage Accounts (HSA/FSA)</li>
<li>Employer Paid Short and Long Term Disability, Basic Life, AD&amp;D</li>
<li>Additional Benefit Options Including Voluntary Life and Emergency Medical Transport</li>
<li>EAP Program</li>
<li>Retirement Savings Plan &ndash; 401k with Company Match</li>
<li>Equity Grants in the Company</li></ul> 


How To Apply: 
Interested candidates are encouraged to apply by filling out the application . This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.

</div><div>NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don&rsquo;t meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.</div>
</div>
<div></div><div>US CITIZENSHIP, PERMANENT RESIDENCY, REFUGEE OR ASYLUM STATUS IS REQUIRED.</div>
<div></div>
<div>Eligibility to obtain and maintain a U.S. Security Clearance.</div>
<div></div>
<div>We&rsquo;re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.</div>
<div></div>
<div>No outside recruiters, please.</div></div></div></div><div></div>

Senior Flight Test Engineer

Raytheon

<div>Date Posted:
2026-04-29
Country:
United States of America
Location:
US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site)
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Security Clearance Type:
DoD Clearance: Secret
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling &ndash; to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today&rsquo;s mission and stay ahead of tomorrow&rsquo;s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 
Production Test Engineers (PTE) are part of a manufacturing team who support the test process through one or more phases of the product life cycle, including product development, transition to production, sustained production and depot activities. PTE validates and ensures compliance of the prime hardware to technical data package requirements and supporting test equipment. Performs troubleshooting and problem solving of test failures. Identifies opportunities in test processes to improve efficiency, yields, and capacity. 
What You Will Do
Troubleshoot and provide accurate rework instructions for the product hardware.
Creation and maintenance of spares and the test equipment obsolescence plan.
Creation of Basis of Estimates (BOE) to estimate costs to add additional capacity, new capabilities and equipment obsolescence.
Lead projects to reduce test time, improve the test process through analysis of predictive metrics of trends, failure modes, and test yields.
Develop test flows and contribute to test capacity analysis.
Maintain changes to the test equipment technical data package which includes drawings, test instructions, test position manuals, and system software.
Assist in non-routine fault isolation, diagnosis and repair of the product or test equipment.
Lead root cause and corrective action investigations and present findings, utilizing fault trees and knowledge point plans.
Perform risk assessments and supports the programs risk register reviews. 
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 2 years of prior relevant experience.
Experience in a manufacturing environment.
Ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF). 
Qualifications We Prefer
Experience with hands-on hardware integration and troubleshooting
Experience in Manufacturing environment
Experience with technical writing
Excellent interpersonal skills
Excellent written and verbal communication skills
Ability to multitask in a fast-paced environment
Ability to develop sustaining solutions to routine technical problems
Ability to lead and mentor newer PTE's
Experience with interpretation of technical documentation
Experience with data analysis 
What We Offer 
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. 
Learn More &amp; Apply Now! 
Please consider the following role type definition as you apply for this role. 
 
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate&rsquo;s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company&rsquo;s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans&rsquo; Readjustment Assistance Act.
Privacy Policy and Terms:</div>

Product Test Engineer II

<div>Date Posted:
2026-04-15
Country:
United States of America
Location:
US-AZ-TUCSON-801 ~ 1151 E Hermans Rd ~ BLDG 801 (External Site)
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
Security Clearance Type:
DoD Clearance: Secret
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling &ndash; to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today&rsquo;s mission and stay ahead of tomorrow&rsquo;s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 
Production Test Engineers (PTE) are part of a manufacturing team who support the test process through one or more phases of the product life cycle, including product development, transition to production, sustained production and depot activities. PTE validates and ensures compliance of the prime hardware to technical data package requirements and supporting test equipment. Performs troubleshooting and problem solving of test failures. Identifies opportunities in test processes to improve efficiency, yields, and capacity. 
What You Will Do
Troubleshoot and provides accurate rework instructions for the product hardware.
Creation and maintenance of spares and the test equipment obsolescence plan.
Creation of Basis of Estimates (BOE) to estimate costs to add additional capacity, new capabilities and equipment obsolescence.
Lead projects to reduce test time, improve the test process through analysis of predictive metrics of trends, failure modes, and test yields.
Develop test flows and contribute to test capacity analysis.
Maintain changes to the test equipment technical data package which includes drawings, test instructions, test position manuals, and system software.
Assist in non-routine fault isolation, diagnosis and repair of the product or test equipment.
Lead root cause and corrective action investigations and present findings, utilizing fault trees and knowledge point plans.
Perform risk assessments and supports the programs risk register reviews.
Lead projects and is responsible for execution. 
Qualifications You Must Have
Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 5 years of prior relevant experience or an advanced degree in a related field and minimum 3 years experience.
Experience in a manufacturing environment.
Experience leading teams or project execution.
The ability to obtain and maintain an Alcohol, Tobacco, Firearms and Explosives Access (ATF).
Qualifications We Prefer
Experience with hands-on hardware integration and troubleshooting
Experience with technical writing
Excellent interpersonal skills
Excellent written and verbal communication skills
Ability to multitask in a fast-paced environment
Ability to develop sustaining solutions to routine technical problems
Ability to lead and mentor newer PTE's
Experience with interpretation of technical documentation
Experience with data analysis 
What We Offer 
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. 
Learn More &amp; Apply Now! 
Please consider the following role type definition as you apply for this role. 
 
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate&rsquo;s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company&rsquo;s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans&rsquo; Readjustment Assistance Act.
Privacy Policy and Terms:</div>

Senior Product Test Engineer

Vertiv

<div>Brief Job Description:
The Prototype Testing Specialist :
<ul><li>Responsible for creating and testing prototypes, inspecting initial production pieces, and supporting the development of technical solutions. technical documentation, process testing for quality assurance, and collaboration with various departments. The ideal candidate has a technical background, proficiency in English, and experience in engineering or manufacturing.
</li></ul>Responsibilities and Measurement Criteria with Time investment Needed on Each:
(This will describe the overall core responsibilities of the role, decision making responsibilities etc.)
<ul><li>To have knowledge of IEC-61439 &amp; IEC-60529 standards related to switchgear.
</li><li>To produce associated documentation with the testing of the panel with detail.
</li><li>To use test equipment such as a dielectric tester, multi-meter, IR tester etc.
</li><li>To maintain safe working practices and always adhere to quality control &amp; safety procedures.
</li><li>To travel to sites and diagnose then fix issues with panels.
</li><li>To have a good customer relationship and confidence to demonstrate testing under the presents of the end customer.
</li><li>Accurately read and interpret electrical drawings and instructions, both written and verbal (from the supervisor and other team members)
</li><li>Carry out testing and inspection on finished Switchgear panels both on the shop floor and at customer premises in line with approved standards and customer requirements.
</li><li>Adhere to and always maintain safe working practices.
</li><li>Be able to send a panel to site with 100% confidence that it fits within specification and functions as stated.
</li><li>Preform and host Factory acceptance tests and site acceptance tests in the presents of end customers.
</li><li>Adhere to and actively improve (through feedback to the supervisor) quality control processes and test procedures.
</li><li>Travel to customer sites to support installation, as and when required.
</li><li>To provide a high level of customer service to both internal and external customers.
</li><li>Excellent organizational, planning and time management skills. With the ability to manage changing priorities and work flexibly and proactively to tight timescales.
</li><li>Ability to work productively, efficiently, and effectively on own initiative as well as part of a team.
</li><li>Strong problem-solving skills.
</li><li>Excellent communications skills must be able to communicate at all levels.
</li><li>Able to work extended and/or unsocial hours to the full requirements of the role.
</li><li>Adhere to Vertiv HSE Policy.
</li><li>Adhere to Vertiv Equal opportunity, cultural diversity, fair treatment, and prevention of harassment &amp;-discrimination policies.
</li><li>Ensuring 100% PPE Compliance when going out to the Shopfloor.
</li><li>Honestly state any illnesses or any other minor &amp; major issues during induction.
</li><li>Avoid wearing jewellery or loose clothing while inside shopfloor.
</li><li>Cooperate with anything the employer does to comply with OHS requirements.
</li><li>Take reasonable care for their own health and safety.
</li><li>Familiar with the use of emergency equipment such as Fire Alarm Call Point and Fire Extinguishers.
</li><li>Full knowledge in Emergency Assembly Procedure.
</li><li>Take reasonable care for the health and safety of others who may affected by their acts or omissions.
</li><li>Knowledge in H&amp;S Policy and Objectives
</li><li>Coordinate with production supervisors or Safety Officer for H&amp;S Issues observed to be addressed.
</li><li>Do not perform other activities until the responsibilities are assigned by Manager.
</li></ul>Qualifications:
Required/ Minimum Qualifications:
<ul><li>University or high school degree in a technical field.
</li><li>Minimum 5 years of experience in switchgear industry.
</li></ul>Additional / Preferred Qualifications: -
<ul><li>Proficiency in English: Ability to communicate and work in English.
</li><li>Good knowledge of MS Office (Oracle experience is an advantage).
</li></ul>Physical &amp; Environmental Requirements: - (To be used majorly for manufacturing jobs.)
<ul><li>6 working days
</li></ul>Time Travel Needed:
<ul><li>None</li></ul></div>

Senior Testing Engineer

Hudson Manpower

<div>We have an urgent opening for the position of QA Engineer &ndash; Test Bay Engineer for a reputed company in Dammam, Saudi Arabia.
Position: QA Engineer &ndash; Test Bay Engineer 
Location: Dammam, Saudi Arabia 
Industry: Transformer Manufacturing | Substation | LV Panels | Electrical Equipment
Job Responsibilities:<ul><li>Conduct all electrical routine tests on Transformers complying with international standards</li><li>Perform Type Tests &amp; Special Tests on Transformers, Substations &amp; LV Panels</li><li>Maintain Test Set-up and Test Facilities to complete daily output</li><li>Raise NCR (Non-Conformance Reports) whenever faults/failures are observed during testing</li><li>Instrument calibration and validation of measuring instruments</li><li>Prepare Routine Test Certificates, Type/Special Test Reports &amp; Inspection Test Plans (ITP)</li><li>Handle after-sales services / warranty support / troubleshooting visits</li><li>Ensure compliance with QMS / EMS / Safety requirements</li></ul>
Requirements:<ul><li>Minimum 5+ years of experience in QA / Production in Transformer, Substation, LV Panel manufacturing industry</li><li>Strong experience in Routine Tests, Type Tests &amp; Special Tests</li><li>Knowledge of Quality Assurance, Inspections, Testing &amp; International Standards</li><li>Awareness of ISO 9001, ISO 14001 &amp; Industrial Safety</li><li>BE / BTech / BS in Electrical Engineering</li></ul>
Company Benefits:<ul><li>Working Days: Sunday to Thursday</li><li>Working Hours: 7:30 AM to 5:00 PM</li><li>Overtime: Provided based on job requirement (x1.5)</li><li>Monthly HRA provided</li><li>Transportation Allowance provided</li><li>Medical Coverage as per company policy</li><li>Visa provided</li><li>Air Ticket provided</li><li>GAMCA Medical reimbursement upon arrival</li><li>Degree Attestation + Biometrics reimbursement upon submission of original invoice</li></ul>
Salary: 
Based on current salary, experience, and hiring manager recommendation.
Looking forward to your response. 
Requirements:<ul><li>Minimum 5+ years of experience in QA / Production in Transformer, Substation, LV Panel manufacturing industry</li><li>Strong experience in Routine Tests, Type Tests &amp; Special Tests</li><li>Knowledge of Quality Assurance, Inspections, Testing &amp; International Standards</li><li>Awareness of ISO 9001, ISO 14001 &amp; Industrial Safety</li><li>BE / BTech / BS in Electrical Engineering</li></ul></div>

QA Engineer / Test Bay Engineer | Dammam, Saudi Arabia

نكست الشرق للإستشارات الهندسية

We are seeking a skilled and detail-oriented Mechanical Engineer with 7+ years experience to design, develop, and test mechanical systems and components. The ideal candidate will apply engineering principles to innovate and improve products, processes, and systems in a variety of industries, including manufacturing, automotive, energy, HVAC, and robotics.Key Responsibilities:<ul><li>Design and develop mechanical components, systems, and products using CAD software (e.g., SolidWorks, AutoCAD).</li><li>Perform engineering calculations, simulations, and testing to validate designs.</li><li>Conduct feasibility studies and cost analyses for new products and systems.</li><li>Collaborate with cross-functional teams (electrical, manufacturing, quality) to integrate systems.</li><li>Create technical drawings, specifications, and documentation for manufacturing and assembly.</li><li>Identify and troubleshoot mechanical problems and implement solutions.</li><li>Ensure designs comply with industry standards, safety regulations, and quality guidelines.</li><li>Oversee prototype development and participate in product testing.</li><li>Continuously improve existing designs and manufacturing processes for cost efficiency and performance.</li><li>Support maintenance and operations teams with technical expertise.</li></ul>Job Type: Full-timeExperience:<ul><li>Mechanical Engineer: 5 years (Preferred)</li></ul>Location:<ul><li>Abu Dhabi (Preferred)</li></ul>Work Location: In person

MEP Engineer

Search 10000+ Manufacturing test engineer jobs near you this May. New roles added regularly across leading industries. Apply today.