Qureos Mentor

SERCO Limited

We are looking for a Technician to operate the utility vehicles including but not limited to petrol or diesel runway and road sweepers, trucks, loaders, litter vacuum machines, hydro-blasting machines and access equipment. Ensure facilities roadways including GSE roads, car parks, tunnels, fence and apron area are maintained free of FOD / debris always.The role will be based in Dubai Airports.Key accountabilities<ul><li>Operate the Utility Vehicles in accordance with the manufacturer instructions and company procedures.</li><li>Ensure facilities roadways, car parks, tunnels, fence and apron area are maintained free of FOD / debris always.</li><li>Maintain a clean and functioning vehicle, report/ notify Supervisors any defects and damages of the assigned vehicle during the course of the shift, ensure empty road sweeper machine at the end of the shift and carry out cleaning of the vehicle.</li><li>Be aware of and adhere to all Safety & Security rules and regulations.</li><li>Able to speak and understand English with good level of Fluency.</li><li>Airport experience is highly desirable and Knowledge of Airport’s Safety, particularly ramp safety rule.</li></ul>

Technician - Equipment -ACW (Runway Sweeper/Rubber Removal Machines)

<ul><li>Provide expertise in renewable energy production from sustainable sources, including wind, solar, and hydro/marine power (e.g., wave motion).</li><li>Research and develop strategies to minimize environmental impact through new machinery, equipment, and production processes.</li><li>Advise project management teams on the selection of sustainable energy solutions.</li><li>Consult on the design, installation, operation, and maintenance of renewable energy systems.</li><li>Develop transition plans to alternative energy sources such as wind, solar, and wave power to reduce pollution and dependency on fossil fuels.</li><li>Analyze and select sites for renewable energy installations based on environmental and technical factors.</li><li>Review and optimize designs for solar panels, wind turbines, and other renewable energy systems to improve efficiency.</li><li>Prepare project documents emphasizing safe working practices.</li></ul>Key Accountabilities<ul><li>Conduct real-world performance tests of equipment and provide technical evaluations.</li><li>Analyze experimental or field data to identify trends and improve performance.</li><li>Evaluate and test equipment at manufacturing facilities.</li><li>Oversee technical and economic aspects of new renewable energy sites, including ground condition inspections.</li><li>Use computer modeling software to design and estimate energy production.</li><li>Ensure compliance with environmental laws and regulations in renewable energy projects.</li><li>Provide technical support to integrate renewable energy systems into existing infrastructure.</li><li>Write, review, and present technical reports.</li><li>Collaborate with internal and external stakeholders to develop and implement new renewable energy technologies.</li><li>Conduct environmental assessments of proposed sites to ensure regulatory compliance.</li><li>Design renewable energy systems that are durable, efficient, and safe for commercial use.</li><li>Demonstrate expertise in energy storage systems, microgrids, hydrogen technologies, VPP, DSR, and transformers.</li></ul>

Renewable Energy Engineer

Key Accountabilities<ul><li>Lead the development, global best practice benchmarking and production of facility management procedures and standards as well as scope of works, specifications in terms of both hard and soft services</li><li>Engage and maintain close working relationships within the client in order to optimize O&M best practices</li><li>Assisting the Serco’s Consultancy team with their implementation by providing understanding of the desired standards as SME on O&M elements such as: Post Maintenance Testing (including routine acceptance criteria). System-Engineering Programmes over critical systems life cycles. Equipment/ Tool Control (including control, use, storage, scheduling and safety), and Measuring and Test Equipment (M&TE) Configuration Management (including a change control process). Standardized Grounds and Landscaping schedules and templates. Facility Management (FM), that address facility safety, surveillances and inspections, seasonal planning and customer service. Emergency Management, that address preparedness, drills and action plans for emergencies. Space, Energy, and Cleaning Management. Procurement processes for goods and services in support of O&M. </li><li>Develop, review and amend procedures and processes, including: Health and safety Environmental Waste management Quality assurance Continuous improvement </li><li>Establish a detailed and comprehensive SoW and specifications for all client’s existing community services in-line with international best practices</li><li>Review, develop, consolidate and optimise the SoW of all client’s existing community services contracts aligned with international standards and the local market</li><li>Provide tendering documents that are specific to the facilities of the client in so far as strategy, design and technical details and operating procedures manual and FM Strategy</li></ul>

Facility Management Consultant

We are looking for ELV Technicians to join our Talent Pool for potential opportunities with Serco across various contracts in the UAE. Key Accountabilities<ul><li>Carry out planned and reactive maintenance on ELV/IT systems such as CCTV, access control, turnstiles, structural cabling, IPTV, UPS, motorized blinds and louvers, gate barriers, audio systems, lighting control, and parking management systems.</li><li>Monitor, rectify, and repair ELV/IT systems, ensuring records are updated daily.</li><li>Assist in monitoring ELV systems&#x27; status and functionality, ensuring efficient operations.</li><li>Maintain up-to-date knowledge for the safe and efficient performance of all duties.</li></ul>

ELV Systems Technician

Key accountabilities<ul><li>Ability to conform to all general and technical safety requirements at all times to ensure the health, safety & welfare of self and others at work.</li><li>Any other work as assigned by the line manager to achieve the purpose.</li><li>Can read interpret and describe the functionality of drawings (circuit and wiring diagrams/schematic and layout drawings) irrespective of systems.</li><li>Can correctly setup and use electrical/mechanical test equipment and interpret the test results</li><li>Knowledge in the use & interpretation of Local and International Electrical /Mechanical Standards and Regulations.</li><li>Ability to prepare various types of reports and CMMS work order management</li><li>Ability to adopt a logical or methodical approach to troubleshooting & fault finding</li><li>Acts a role model and leads the team by example with consistent attention to detail and quality by demonstrating a "get it right first time every time " attitude to the job</li><li>Successfully plans every aspect of the shift activities ahead (work allocation, materials, safety, mobilization, etc), extracting maximum productivity from the team</li><li>Seeks continuous improvement consistently</li><li>Follows applicable business process in full, uses the work management applications as envisaged</li><li>Fully conversant to SOP for the job, refers when required</li><li>Good articulation ability demonstrated in tool box talk and job briefing</li><li>Ensures shift reporting, handovers, records, log books comply with operational procedures</li><li>Provides specialist advice and technical support in relation to fault-finding and repair of plant, systems and equipment</li></ul>

Team Leader-FM Civil

➢ Ability to conform to all general and technical safety requirements at all times to ensure the health, safety & welfare of self and others at work ➢ Any other work as assigned by the supervisor / duty engineer to achieve the purpose. ➢ Can read interpret and describe the functionality of civil works drawings (schematic & layout drawing) ➢ Knowledge in the use & interpretation of Local and International Standards and Regulations. Assets Exposure (Direct) Major assets, but not limited to • Gypsum walls • Special purpose and decorative furniture • Various types of office furniture • Doors and windows • Wall panels • Ceiling works Asset Maintenance Experience (Hands-on) For listed Assets, in the capacity as team member and solo: o Periodic Preventive Maintenance o Breakdown Trouble Shooting o Inspections o Condition Assessment o Condition Based Maintenance o Corrective Maintenance o Configuration and Modifications Tasks’ Experience (Hands-on) Tasks such as, but not limited to • Gypsum partition works and repairs • Glazed wall portioning works • Fixing of Metal cladding activities • Door shutter works • Fabrication of various furniture’s using different types of materials

Assistant Technician –   FM Civil and Furniture/Carpenter

➢ Ability to conform to all general and technical safety requirements at all times to ensure the health, safety & welfare of self and others at work ➢ Any other work as assigned by the supervisor / duty engineer to achieve the purpose. ➢ Knowledge of Building Management Systems (BMS) ➢ Can read interpret and describe the functionality of pump systems and pipework schematics and system layout drawings ➢ Can correctly setup and use test equipment and interpret the test results.to include • Dial test indicator (DTI) • Potable water test kit • Vibration analyser ➢ Ability to raise & complete PMS fault report sheets, daily utilization reports and CMMS work orders ➢ Knowledge in the use & interpretation of Local and International Plumbing, drainage & Pipework Standards and Regulations ➢ Ability to adopt a logical or methodical approach to troubleshooting & fault finding on water networks, equipment and system ➢ Acts a role model for tradesman and helpers and leads the team by example with consistent attention to detail and quality by demonstrating a "get it right first time every time " attitude to the job Assets Exposure (Direct) Major assets below, but not limited to • Water pipework systems and associated valves • Waste and drainage pipework systems • Pressure reducing valve stations (PRVs) • Irrigation pumps and systems • Storm water pumps and systems • Aircraft potable water systems and associated valves • Sewage pumps and associated pipework Asset Maintenance Experience (Hands-on) For listed Assets, in the capacity as a lead person: o Periodic Preventive Maintenance o Breakdown Trouble Shooting o Inspections o Condition Assessment o Condition Based Maintenance o Corrective Maintenance o Configuration and Modifications Tasks’ Experience (Hands-on) Tasks such as, but not limited to • Clean, lubricate, adjust bearings and pulleys. Repair or replace components • As needed to ensure proper operation. • Check control system and devices for evidence of improper operation. • Maintenance and troubleshooting on: • Water pipework systems and associated Valves • Waste and drainage pipework systems • Pressure reducing valve stations (PRVs) • Irrigation pumps and systems • Storm water pumps and systems

Assistant Technician –   Water Network/Pump Mechanic

Join SERCO Limited and explore 7   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

SERCO Limited

ABOUT_COMPANY

Technician - Equipment -ACW (Runway Sweeper/Rubber Removal Machines)

Renewable Energy Engineer

Facility Management Consultant

ELV Systems Technician

Team Leader-FM Civil

Assistant Technician – FM Civil and Furniture/Carpenter

Assistant Technician – Water Network/Pump Mechanic