Qureos Mentor

SESC Group

We are seeking an experienced, technically proficient, and highly organised Senior QA/QC MEP Engineer / Project Manager to lead and manage the end-to-end quality assurance and quality control function for all MEP systems .The MEP scope of this project is of exceptional scale and complexity, encompassing high-voltage and low-voltage electrical infrastructure, ELV, HVAC systems, plumbing and drainage networks, fire protection systems, BMS/EMS integration, vertical transportation, and specialist fit-out MEP. The QA/QC MEP function is critical to ensuring that all systems are delivered in full compliance with project specifications, international standards, authority requirements, and the client's exacting quality benchmarks.Start Date Immediate / As per Project RequirementsKey Responsibilities<ul><li>Lead and supervise day-to-day MEP quality inspections across all active work fronts, including rough-in, above-ceiling, concealed services, pre-insulation, post-insulation, pressure testing, flushing, and pre-commissioning stages.</li></ul><ul><li>Coordinate and witness all statutory third-party inspections (Civil Defence, DEWA/RAKIA, Etisalat/du, Civil Aviation Authority where applicable) and manage the preparation and submission of all associated documentation.</li></ul><ul><li>Ensure MEP works are inspected and approved before concrete pours, dry wall closures, floor screed, raised floor installations, and ceiling closures &mdash; maintaining strict hold point discipline.</li></ul><ul><li>Implement a structured snag management process from mid-construction through to practical completion; track, assign, and close out all MEP snag items using digital snagging tools.</li></ul><ul><li>Manage the full lifecycle of MEP technical submittals including shop drawings, material submittals, O&amp;M manuals, as-built drawings, and commissioning records; track submission, review, and approval status in the document control system.</li></ul><ul><li>Review and approve incoming MEP material submittals for conformance with project specifications, approved brand lists, and applicable standards (BS, EN, ASHRAE, IEC, NFPA, CIBSE).</li></ul><ul><li>Maintain a structured QA/QC register for all inspection records, test reports, calibration certificates, NCRs, CARs, audit reports, and close-out documentation.</li></ul><ul><li>Ensure that all equipment and materials delivered to site are subject to incoming material inspection; manage material non-conformances and coordinate with procurement for replacements.</li></ul><ul><li>Prepare and issue QA/QC weekly and monthly reports to the client, consultant, and senior management; present quality KPIs, NCR/CAR status, inspection close-out rates, and audit findings.</li></ul><ul><li>Compile and manage the Quality Dossier (QD) / Turnover Package (TOP) for each MEP system, ensuring completeness and compliance with handover requirements prior to commissioning and practical completion.</li></ul><ul><li>Manage the Integrated Systems Testing (IST) QA process; ensure all inter-system interfaces (BMS, EMS, IBMS, FA, FP, security, AV) are tested and documented.</li></ul><ul><li>Attend and actively contribute to weekly MEP coordination meetings, QA/QC review meetings, and client progress meetings; prepare and present QA/QC agenda items with supporting data.</li></ul><ul><li>Lead, manage, and mentor a team of MEP QA/QC Engineers, Inspectors, and document controllers across multiple disciplines and work fronts.</li></ul><ul><li>Assign inspection responsibilities, set performance targets, conduct regular performance reviews, and identify training and development needs for the QA/QC team.</li></ul><ul><li>Issue and track NCRs and CARs to MEP sub-contractors; escalate repeat non-conformances to senior management and take proactive steps to prevent recurrence.</li></ul><ul><li>Maintain current knowledge of updates to applicable codes and standards; communicate changes to the MEP team and update QA/QC documentation accordingly.</li></ul>Qualifications &amp; Education<ul><li>Bachelor of Engineering (B.Eng.) or Bachelor of Science (B.Sc.) in Electrical Engineering, Mechanical Engineering, or equivalent MEP discipline from an accredited university. Master's degree is an advantage. [UAE MOFA attestation required]</li></ul><ul><li>Professional Certification: Chartered Engineer (CEng), Professional Engineer (PE), or membership of a recognised engineering institution (IMechE, IET, CIBSE, ASHRAE) is highly desirable.</li></ul><ul><li>PMP (Project Management Professional) certification from PMI or PRINCE2 Practitioner is advantageous.</li></ul><ul><li>NEBOSH / IOSH certification for health, safety, and risk awareness is preferred.</li></ul><ul><li>Certification or training in commissioning (e.g., CIBSE Commissioning Code, NEBB, AABC) is an asset.</li></ul>Experience Requirements<ul><li>Minimum 7 years of relevant post-graduate experience in MEP engineering, with at least 3 years in a dedicated QA/QC leadership role on major construction projects.</li></ul><ul><li>Proven track record on mega-projects in the hospitality is highly preferred.</li></ul><ul><li>Prior experience on projects in the UAE or GCC is strongly preferred; familiarity with UAE authority requirements (Civil Defence, DEWA, ADDC, municipality) is essential.</li></ul><ul><li>Hands-on experience developing and managing ITPs, Method Statements, and WIR processes for complex MEP systems in a multi-contractor environment.</li></ul><ul><li>Experience managing large QA/QC teams (10+ personnel) across multiple concurrent work packages and work fronts.</li></ul><ul><li>Experience with digital QA/QC management platforms (e.g., Procore, Asite, Fieldwire, BIM 360, Dalux) is preferred.</li></ul>Job Types: Full-time, PermanentPay: AED9,500.00 - AED11,000.00 per monthApplication Question(s):<ul><li>Are you an immediate joiner (no notice period)?</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>MEP : 7 years (Preferred)</li><li>QA/QC in MEP systems: 3 years (Preferred)</li></ul>Language:<ul><li>Turkish (Preferred)</li><li>Spanish (Preferred)</li></ul>License/Certification:<ul><li>UAE Driving Licence (Preferred)</li><li>UAE MOAFE attested 4-year degree (Preferred)</li></ul>Willingness to travel:<ul><li>100% (Preferred)</li></ul>Work Location: In person

SENIOR QA/QC MEP ENGINEER

Mechanical Systems QA/QC EngineerLocation: Dubai / Ras Al Khaimah, UAE Employment Type: Full-Time | Permanent | Site-Based Salary: AED 5,000 &ndash; 7,000 per month Industry: Engineering / Construction / Mission-Critical ProjectsWe are looking for a technically strong Mechanical Systems QA/QC Engineer with real site exposure and a solid understanding of mechanical building services systems, construction documentation, and field quality control.This role is suited to an engineer who can move confidently between drawings, inspections, engineering changes, technical submissions, site conditions, testing activities, and consultant coordination.You must be comfortable working in a live construction environment and technically competent in reviewing mechanical layouts, schematics, risers, shop drawings, as-built drawings, and Engineering Instructions (EIs), while ensuring installation works comply with approved documentation, specifications, and project requirements.Key ResponsibilitiesYou will be responsible for inspecting and monitoring the quality of HVAC, chilled water, plumbing, drainage, firefighting, ventilation, and associated mechanical systems during installation and testing phases. This includes verifying works against approved drawings, method statements, material submittals, and QA/QC procedures.You will review technical documents such as shop drawings, IFC drawings, as-builts, submittals, WIRs, MIRs, RFIs, NCRs, inspection records, and Engineering Instructions, ensuring that revisions and design changes are properly tracked and reflected in site execution.The role also requires involvement in inspection planning, test witnessing, QA/QC reporting, consultant/client coordination, and technical follow-up to support timely closure of quality issues and maintain full traceability of inspected works.Technical RequirementsCandidates must have a strong technical understanding of mechanical systems used in building services projects, particularly HVAC, plumbing, firefighting, chilled water, ductwork, pipework, valves, pumps, drainage, and ventilation systems.You should be able to confidently read and interpret drawings, layouts, schematics, sections, coordination details, and revision-controlled technical documentation, and understand how Engineering Instructions (EIs) impact construction, documentation, and inspection processes.Knowledge of standards and quality frameworks such as ASHRAE, SMACNA, NFPA, CIBSE, and ISO 9001:2015 is highly desirable. Exposure to testing, commissioning, TAB readiness, pressure testing, flushing, drainage testing, and installation inspections is also important.Experience with hotel kitchen systems, extract systems, cold rooms, LPG systems, or other specialist mechanical systems will be considered a strong advantage.Systems, Software &amp; CommunicationThis role requires advanced Microsoft Office capability, especially in Excel and Word.You must be able to use Excel for trackers, logs, lookups, filters, status monitoring, inspection follow-up, revision control, and structured QA/QC reporting. You should also be capable of producing clear, well-structured technical reports and formal documentation in Word.Experience with project documentation platforms such as ACONEX, FORTIS, or similar systems is a strong plus.Strong written and spoken English communication is essential. The successful candidate should be capable of communicating professionally with consultants, contractors, subcontractors, and internal project teams, and should be confident in leading or contributing to project meetings, quality reviews, and technical coordination discussions.Requirements<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering (4-year degree)</li><li>UAE MOFA-attested degree is mandatory</li><li>Valid UAE Driving License is mandatory</li><li>Minimum 3 years of relevant experience</li><li>At least 2 years of UAE project/site experience preferred</li><li>Strong familiarity with site conditions, installation challenges, and practical construction workflows</li><li>Able to complete a technical assessment as part of the hiring process</li></ul>What We OfferThis is an opportunity to join a technically focused engineering environment with exposure to high-compliance, quality-driven projects and a strong emphasis on engineering standards, field quality, and technical growth.Job Type: Full-timePay: AED5,000.00 - AED7,000.00 per monthApplication Question(s):<ul><li>Do you have a relevant 4-year degree certificate attested by the UAE Ministry of Foreign Affairs (MOFA)?</li><li>Are you an immediate joiner (no notice period)?</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>License/Certification:<ul><li>UAE Driving Licence (Required)</li></ul>Willingness to travel:<ul><li>100% (Required)</li></ul>Work Location: In person

Mechanical Systems QA/QC Engineer

Location: Ras Al Khaimah, UAE &ndash; 100% On-Site Employment Type: Full-Time | Permanent Industry: Engineering / Construction / Technical ServicesWe are seeking a highly competent Technical Document Controller with an engineering degree (mechanical, electrical, or ELV) and a minimum of 2 years of engineering/document control experience. This is a site-based, technical role supporting the QA/QC processes, ensuring meticulous document control, tracking, and integration of engineering instructions (EIs), submittals, WIRs, NCRs, and other critical project documentation.The ideal candidate is technically proficient, highly organized, and capable of interpreting and coordinating MEP, electrical, and ELV drawings, specifications, and site reports. Applicants must have advanced computer literacy and familiarity with document management systems such as ACONEX or FORTIS.Key ResponsibilitiesDocument Control &amp; Management<ul><li>Maintain, organize, and manage all project documents in compliance with QA/QC protocols.</li><li>Implement rigorous version control, monitoring approval workflows for all technical documents.</li><li>Track, distribute, and retrieve submittals, RFIs, WIRs, NCRs, and other project-related documentation.</li><li>Prepare and maintain logs for transmittals, inspection trackers, and site reports.</li><li>Assist QA/QC teams during audits, compliance reviews, and regulatory inspections.</li></ul>Technical Coordination<ul><li>Review, interpret, and overlay MEP, electrical, ELV, and construction drawings in response to Engineering Instructions (EIs).</li><li>Ensure engineering instructions are incorporated accurately into IFC and shop drawings.</li><li>Coordinate with site engineers, subcontractors, and QA/QC teams to validate site feasibility and report conflicts or constraints.</li><li>Maintain accurate traceability and documentation of revisions, approvals, and technical feedback.</li></ul>Reporting &amp; Communication<ul><li>Compile progress reports, site observation reports, and technical submission packages.</li><li>Provide clear, detailed, and structured reports for project managers, QA/QC managers, and client representatives.</li><li>Communicate effectively with site teams, inspectors, and contractors to ensure document compliance and timely updates.</li></ul>Advanced Computer Skills &amp; Tools<ul><li>Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook) with advanced skills:</li><li>Excel: KPI dashboards, Gantt charts, pivot tables, and conditional formatting</li><li>Word: Structured reports, templates, headings, tables, charts, and proofreading</li><li>Experience with ACONEX, FORTIS, or similar document management platforms (preferred).</li><li>Ability to maintain structured digital filing systems, track document revisions, and generate automated reports.</li></ul>RequirementsEducation &amp; Experience:<ul><li>Bachelor&rsquo;s degree in Mechanical, Electrical, or ELV Engineering (mandatory).</li><li>Minimum 2 years of professional engineering experience.</li><li>Minimum 1 year of document control experience, preferably in MEP, construction, or technical services projects.</li></ul>Technical Competencies:<ul><li>Strong understanding of QA/QC procedures, inspection workflows, and documentation standards.</li><li>Ability to read, interpret, and coordinate MEP, electrical, ELV, and construction drawings.</li><li>Familiarity with project submission processes, revision control, and traceability.</li><li>Strong attention to detail and high-level organizational skills to meet project deadlines.</li></ul>Other Requirements:<ul><li>Full professional proficiency in English (written and spoken).</li><li>MOFA-attested educational documents (mandatory).</li><li>Valid UAE driving license with willingness to travel to project sites.</li><li>100% on-site availability in Ras Al Khaimah.</li></ul>Apply Now to join our site-based QA/QC team and contribute to accurate, efficient, and technically sound project documentation and compliance.All applicants will undergo an initial interview followed by a role-specific technical assessment to evaluate their skills and suitability.Job Type: Full-timePay: AED3,250.00 - AED4,250.00 per monthEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>MEP or technical projects: 1 year (Preferred)</li></ul>License/Certification:<ul><li>UAE Driving Licence (Required)</li></ul>Willingness to travel:<ul><li>100% (Required)</li></ul>Work Location: In person

Technical Document Controller – Site-Based (MEP / ELV)

Join SESC Group and explore 3   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.

SESC Group

About Company

SENIOR QA/QC MEP ENGINEER

Mechanical Systems QA/QC Engineer

Technical Document Controller – Site-Based (MEP / ELV)