Electrical Engineer (PCC & Start-up)

Job Description

FIELD & LEER BUILDING:

• LEER/FIELD PERMIT SYSTEM AND ALL THE NECESSARY ARRANGEMENTS/VERIFICATION FOR ALL ACTIVIES
• LOTO SHALL BE PROVIDED AND IMPLEMENTED AS PER BU
• LEER SUBSTATION /MCC PANELPANEL VERIFICATION AND STARTUP
• ALL ITR CHECKS VERIFICATION
• INTERLOCK CHECKS
• EDG FUNCTION TEST
• ALL MOTOR SOLO RUN TO BE PERFORMED
• ALL PUMPS AND COMPRESSORS MRT NEED TO BE COMPLETED
• BATTERY ROOM VERIFICATION
• INSPECT SWITCHGEAR FOR PHYSICAL DAMAGE BEFORE PERFORMING TEST.
• VERIFY THE NAME PLATE DETAILS OF THE SWITCHGEAR AGAINST THE APPROVED DRAWINGS.
• CHECK SWITCHGEAR EARTHING IS DONE PROPERLY AS PER APPROVED DRAWING.
• CARRY OUT WIRING AND TERMINAL CHECKS ON CONTROL AND AUXILIARY CIRCUITS, AS PER APPROVED SCHEMATIC DRAWINGS.
• BOM VERIFICATION AGAINST SCHEMATIC DRAWING
• CHECK THE FUNCTIONING OF CIRCUIT BREAKER AND RECORD THE RESULT.
• PRIMARY INJECTION TEST
• PROTECTIVE RELAY TEST (SECONDARY INJECTION TEST)
• STARTER / MCCB / ISOLATOR CHECKING FOR LVSG SYSTEM
• ENERGIZATION AND FUNCTION /INTERLOCK VERIFICATION FOR ALL EQUIPMENTS
• VISUALLY INSPECT FOR EXTERNAL AND INTERNAL MECHANICAL DAMAGE FOR LIGHTING SYSTEM.
  
  

21VERIFY THAT THE NAME PLATE DETAILS/ IFC/DATA SHEET ARE CORRECT AS PER APPROVED DOCUMENT FOR ALL SYSTEM.

• CHECK THAT THE EARTHING CONNECTIONS ARE PROPER AND CHECK EARTHING CONTINUITY.
• ENERGIZE THE LIGHTING MCCBS.
• SIMULATE AND CHECK THE OPERATION OF TIMERS/PHOTOCELL SWITCHES
• POWER UP ALL WELDING SOCKETS ,LIGHTING PANELS AND ALL EQUIPMENTS
• FUNCTION CHECK FOR ALL EQUIPMENT AND LIGHTING ALL SKIDS AND VENDOR ITEMS
• VERIFATION AGAINST DRAWING IFC/DATA SHEET FOR ALL SKIDS AND VENDOR ITEMS
• UPS POWERUP
• VERIFICATION OF VOLTAGE,UPS
• DISCHARGE TEST
• INSPECT THE MOTORS AND LCS FOR ALL SKIDS AND VENDOR ITEMS
• WINDING RESISTENCE TESTING FOR ALL SKIDS AND VENDOR ITEMS MOTORS
• IR TESTING FOR ALL SKIDS AND VENDOR ITEMS
• HVAC commissioning and startup
  
  

Minimum Qualification: Diploma /Bachelor’s Degree in Electrical Engineering

Experience: Diploma-10–15 years in oil & gas projects;

Bachelor’s Degree -8-15 years in oil & gas projects

Overseas experience : Yes(Bahrain is preferred)

Documentation Responsibility: Test packs, energization permits, red-lines, handover dossiers

Soft Skills / Leadership: Leadership, coordination, strong HSE awareness,technically strong

Standards knowledge (added advantage ): IEC, IEEE, API; Compressor station experience

Minimum Key Technical Competencies: MV/LV switchgear, MCCs, motors, VFDs, protection relays, energization