mechanical construction specialist ii Jobs in Oman

mechanical construction specialist ii

aircraft electrical and environmental specialist (f-16) Jobs in Oman

aircraft electrical and environmental specialist (f-16)

airport engineer – aviation specialist Jobs in Oman

airport engineer – aviation specialist

aviation specialist

aviation specialist - airport engineer Jobs in Oman

aviation specialist - airport engineer

aircraft electrical and environmental specialist f 16

Amentum

<div>DUTIES &amp; RESPONSIBILITIES:
Performs and supervises aircraft electrical and environmental (E&amp;E) functions and activities performing as an experienced 5 Level Journeyman or 7 Level Craftsman.
Troubleshoots, inspects, removes, installs, repairs, modifies, overhauls, and operates aircraft E&amp;E systems, components, and associated support equipment.
Uses technical data, wiring diagrams, ohm meters, electronic measuring equipment, GSE and special tools. Expert level in accomplishing and training of wire repair procedures.
Uploads operational software, flight programs (OFP) into system components and maintains currency and software upgrade efficiency.
Expert level to inspect, analyze and evaluate electrical and environmental systems malfunctions, aircraft heating/air conditioning, avionics cooling, cabin pressure, OBOGS, fire and overheat detection systems, AC power system, DC power system, external power system, lighting system to include, exterior, interior, emergency, position lights, anti-collision, formation, slipway lights, taxi light.
Remove install, adjust, operational check, bench-check, service the following: landing gear system, handle, control switches, arresting hook indication/canopy indication/overheat fire/master caution/fuel warning and control systems, anti-skid, brake holding, nose gear steering, secondary flight control, engine bleed air, fire extinguishing system, squibs, fire bottles, start and ignition/air conditioning/pressurization systems and liquid cooling systems.
Interprets inspection findings and determines adequacy of corrective actions.
Reviews maintenance management publications, time compliance technical orders and procedures for accuracy and currency, confirms corrective actions and accuracy of aircraft maintenance records.
Recommends methods to improve equipment performance and maintenance procedures. Acts as quality assurance for the trade.
Performs OJT and instruction, supervises and accepts work performed by RAFO technicians, acts as supervisor and mentor for the shop and directs daily maintenance performed.
Required to perform assigned tasks within your work center that directly supports necessary functions of this job classification.
REQUIREMENTS:
Recent, 5 years F-16 electrical and environmental (E&amp;E) Block 40 or above experience.
Very experienced 2A6X6 5 level or 7 skill level or equivalent with proven record of F-16 flightline (Organizational) or back shop (Intermediate) maintenance environment.
Must be willing to train to other aircraft maintenance tasks as required.
High school diploma or equivalent required.
Current Passport
PREFERENCES:
Air Force AFSC 2A656 or 2A676 with F-16 Block 30/50 experience.
Block 50 experience 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aircraft Electrical and Environmental Specialist (F-16)

<div>Position Summary:
The Avionics Technician (F-16 Block 50+) Fabricates, maintains, and tests electronic systems and components. Adjusts, repairs, and modifies systems and components, and replaces malfunctioning equipment as needed. May be responsible for requirements analysis, systems analysis, performance analysis, and independent test and acceptance of instrumentation including: Area Surveillance, Telemetry, Radar, or Global Positioning System (GPS) Metric Track (MT). Conducts special technical studies and reports regarding instrumentation configuration, acceptance, and/or performance.
Job Description:
<ul><li>Perform or supervise functions involving installation, repair, testing, and modification on NAV Attack, Flight Controls Radar, SMS, Comm/Nav and ECM systems.
</li><li>Operates avionics systems by using aircraft controls to determine operational condition.
</li><li>Interprets equipment operating characteristics to isolate malfunctions in systems such as attack control, radar infrared, laser, instruments, displays, flight control, communication, navigation, satellite communications, identification, defensive and offensive ECM systems.</li>
<li>
Uses technical data wiring diagrams, electronic measurement equipment, AGE/GSE, and special tools.
</li><li>Removes and installs components Performs and supervises alignment calibration and bore sight of avionics systems Uploads operational software into system components
</li><li>Inspects, analyzes and evaluates avionics systems Interprets inspection findings and determines adequacy of corrective actions.
</li><li>Reviews maintenance management publications and procedures Recommends methods to improve equipment performance and maintenance procedures.
</li><li>Performs OJT and instruction, supervises and accepts work performed by RAFO technicians</li>
</ul>
Minimum Requirements:<ul>
<li>
5 years F-16 Bock 50+ or 8 years supporting F-16 aircraft.</li>
<li>
AFSC 2A3X4, 2A354, or 2A374 F-16 Block 50 Integrated Avionics or equivalent
</li><li>Performed and/or supervised functions involving installation, repair, testing, and modification on F-16 Block 50 and up Avionics systems.
</li><li>Must be willing to train to other aircraft maintenance tasks as required.</li>
<li>
High School Diploma</li></ul> 
Clearance Requirements:<ul><li>
Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.</li></ul>
Physical/Preferred Qualifications:<ul>
<li>
Frequently lifts parts and equipment up to 25 pounds.</li>
<li>
Occasionally lifts objects up to 50 pounds.</li>
<li>
Most heavy lifting is accomplished through the use of mechanical devices.</li>
<li>
Work is performed in a shop environment that is moderately lighted, heated, and ventilated. Is exposed to disagreeable fumes and to cuts and bruised from using tools in close placed and hazards of moving vehicles such as forklifts in shop area.</li>
<li>
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.</li>
<li>
The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.</li>
<li>
The employee is occasionally required to sit, climb, or balance.</li>
<li>
Knowledge of military and/or company forms required by work specifications is a plus.</li></ul> 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Avionics Technician F-16 Block 50

<div>The Traffic Management Specialist arranges the shipment of Pre-positioned Global Prepositioned Material Services (GPMS) cargo to various worldwide destinations via air, land and sea. The Incumbent must comply with all applicable International and Federal Transportation Laws, Regulations, Tariffs and Department of Defense (DOD) guidance. Must be able to gain access to Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Integrated Logistics System - Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking system such as Integrated Data Environment/Global Transportation Network Convergence (IGC), Radio Frequency Identification (RFID-ITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Ensures all shipments comply with the International Trade and Arms Regulations (ITAR), the Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).
Principal Accountabilities<ul>
<li>
Inspects, accepts documentation (DD Form 1149/1348-1), prepares and processes all outbound/inbound cargo offered for transportation in the Defense Transportation System (DTS).</li>
<li>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</li>
<li>Properly classified freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</li>
<li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and Maintains Manifest logs.</li>
<li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</li>
<li>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</li>
<li>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</li>
<li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</li>
<li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li>
<li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service Survey form.</li>
<li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li>
<li>Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.</li>
<li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity, description, freight classification, required delivery date, priority or other special requirements.</li>
<li>Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li>
<li>Assists the Pallet and Net Managers with inspections, issuing, accounting, controlling, reporting and maintaining operation stock levels of 463L pallets, nets and other tie-down equipment located on-site.</li>
<li>Assists the WPM Custodian with inspecting and certification, record keeping and reporting the receipt and usage requirements.</li>
<li>Assists the CCO with completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li>
<li>Reports all lost, damaged, destroyed and modified containers to the CCO within 12 hours of discovery.</li>
<li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li>
<li>Receives/Ships all containers in JCM within 12 hours of receipt or departure.</li>
<li>Operates GATES and ICODES to process and manifest cargo and to develop load plans for military and commercial aircraft.</li>
<li>Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.</li>
<li>Inspects cargo documentation, conducts Joint Inspections and certifies that cargo is built correctly and airworthy.</li>
<li>Computes weight and balance and certifies weight distribution of the aircraft with passengers, cargo and baggage.</li>
<li>Determines cargo configuration and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li>
<li>Loads, unloads and services aircraft. Ensure cargo loads are secure and tied down. Assists load team chef with selecting, assembling, palletizing and transporting cargo loads to and from aircraft and storage areas.</li>
<li>Safely transports and handles explosives.</li>
<li>Performs passenger service procedures, check-in, manifest passengers and baggage and perform security checks. Loads/unloads passengers and baggage from aircraft.</li>
<li>Performs weighing of cargo, vehicles and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li>
<li>Implements, documents and controls quality, training, environment and safety programs.</li>
<li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders and procedures.</li>
<li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN IAW with regulation.</li>
<li>Maintains Technical Orders, publications, forms and files required for Traffic Management operations.</li>
<li>Compiles data and submits reports and other correspondence as required.</li>
<li>Performs other duties as assigned.</li>
<li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li>
</ul>
Minimum Requirements<ul>
<li>
Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel and Word programs.</li>
<li>Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel.</li>
<li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li>
<li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li>
<li>Must be able to communicate clearly and concisely, orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</li>
<li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li>
<li>Will be required to receive training and operate material handling equipment.</li>
<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li>
<li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li>
<li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air, data records, container management, customer service, cargo operating computer systems or other related experience.</li>
<li>Possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li>
<li>Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</li>
<li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li>
<li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li>
<li>Ability to travel domestically and internationally.</li>
</ul>
Preferred Qualifications<ul>
<li>
Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint preferred.</li>
<li>Familiarization and certification in AMC Airlift Load Planning, or equivalent, and Joint Inspection process is preferred.</li></ul> 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Traffic Management Specialist

<div>The Traffic Management Supervisor supervises work activities of Traffic Management personnel engaged in the movement of GPMS - Prepositioned cargo via land, air and sea. Responsible for training, establishing and maintaining effective outbound and receiving planning functions. Monitors cargo operations using Logistics Tool Suite (LTS), Global Freight Management (GFM), Cargo Movement Operating System (CMOS), Integrated Logistics System Supply (ILS-S), Global Air Transportation Execution System (GATES), Integrated Computerized Deployment System (ICODES), Integrated Booking System (IBS), Joint Container Management system (JCM), Wood Packaging Materials (WPM) Management Toolset, Global Asset Reporting Tool (GART) and web-based tracking systems such as Integrated Data Environment/Global Transportation Network Convergency (IGC), Radio Frequency Identification (RFIDITV) Tracking Portal, Global Decision Support Systems (GDSS-2) and Single Mobility System (SMS) to ensure In-transit Visibility (ITV) within the Defense Transportation System (DTS). Must be able to complete AMMO-43, Intermodal Dry Cargo Container/CSC Reinspection, AMMO-62, Technical Transportation of Hazardous Materials Distance Learning Courses and WPM certification/recertification web-based training. Ensures all shipments comply with the International Trade and Arms Regulation (ITAR). Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS).
Principal Accountabilities<ul>
<li>
Schedules work priorities based on day-to-day Traffic Management Operations, Global Prepositioned Material Services (GPMS) Taskers, Executive Coordination Agency (ECA) Taskers, Primary Contracting Office (PCO) and Administrative Contracting Office (ACO) Taskers.</li>
<li>Develops work standards; identifies training deficiencies; develops training plans; provides training and supervision for personnel using automated computer programs to process freight &amp; web-based systems to provide in transit visibility.</li>
<li>Checks for completeness and accuracy. Verifies the Nomenclatures, Quantity, Transportation Control Numbers (TCN), Transportation Account Code (TAC), Consignor and Consignee Codes, Hazardous/Classified materials, ITARS certifications and other essential transportation data.</li>
<li>Properly classifies freight, selects commodity codes, selects the most efficient mode of shipment and controls obligations for government transportation funds.</li>
<li>Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo and maintains Manifest and TCN logs.</li>
<li>Uses automated computer systems to process and document to accurately input the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into CMOS, GATES or IBS.</li>
<li>May perform System Administrator duties.</li>
<li>Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN 24-604, 49 Code of Federal Regulation, International Air Transport Association (IATA) and International Maritime Dangerous Goods (IMDG).</li>
<li>Inspects, accepts and inventories all incoming freight and containers for overages, shortages and damage before acceptance. When required, initiate and complete DD Form 361, Transportation Discrepancy Report (TDR).</li>
<li>Provides asset visibility and real-time view to track customer queries using IGC, RFID-ITV, GDSS2 or SMS.</li>
<li>Prepares shipping documents and Movement Requests for international and domestic shipments between sites and container movements from the Sea Port of Embarkation (POE) to the Sea Port of Debarkation (POD) shipped by surface or sealift.</li>
<li>Performs Port Handling and Inland Transportation (PHIT) and ensures the subcontractor performs all duties and responsibilities according to the Statement of Work (SOW). Inspects and documents each shipment for contract compliance on a Customer Service survey form.</li>
<li>Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) - Integrated Booking System (IBS).</li>
<li>Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances and Seaport Clearances.</li>
<li>Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous or outsized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority or other special requirements.</li>
<li>Loads/unloads 463L pallets, equipment, vehicles and ISO containers from flat-bed/low-bed trucks. May assist in loading/unloading military vessels at the seaport.</li>
<li>Performs Pallet and Net Manager duties by inspecting, issuing, accounting for, controlling, reporting and maintaining operational stock levels of 463L pallets, nets and other tie-down equipment located on-site.</li>
<li>Performs WPM custodian duties by inspecting, certifying, record keeping and reporting the receipt and usage requirements.</li>
<li>Performs CCO duties by completing the monthly container inventory, ensuring all containers located on-site are inventoried between the 1st and 30th day of each month.</li>
<li>Reports all lost, damaged, destroyed and modified containers to the CCA within 12 hours of discovery.</li>
<li>Performs container inspections and reports findings on the DA 2404 equipment inspection and maintenance worksheet.</li>
<li>Receives/Ships all containers in JCM within 12 hours of receipt or departure.</li>
<li>Prepares, inspects, reviews and submits Preload Plans, Hazardous Materials Diplomatic Clearances (HAZDIP) and other documents to facilitate air movement.</li>
<li>Inspects cargo documentation and certifies that cargo is built correctly and airworthy.</li>
<li>Performs weighing of cargo, vehicles and outsized cargo to determine the center of balance for rolling stock and ensures cargo dimensions are within pallet and aircraft limitations.</li>
<li>Determines cargo configuration, shoring and aircraft loading requirements in accordance with Air Transportability Test Loading Activity Certifications (ATTLA).</li>
<li>Assists the Air Terminal Supervisor or load team chief with selecting, assembling, palletizing and transporting cargo loads to and from aircraft and storage areas.</li>
<li>Assists in loading, unloading and servicing aircraft. Ensuring cargo loads are secure and tied down.</li>
<li>Safely transports and handles explosives.</li>
<li>Assists the Air Terminal Supervisor with passenger service procedures, check-in, manifest passengers and baggage and perform security checks. May assist in loading/unloading passengers and baggage from aircraft.</li>
<li>Implements, documents and controls quality, environmental and safety programs.</li>
<li>Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders and procedures.</li>
<li>Accomplishes receiving process for all inbound cargo functions of MILSTRIP and NON-MILSTRIP shipments addressed to the host installation SRAN IAW with regulation.</li>
<li>Maintains Technical Orders, publications, forms and files required for Traffic Management operations.</li>
<li>Compiles data and submits reports and other correspondence as required.</li>
<li>Performs other duties as assigned.</li>
<li>Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods.</li>
</ul>
Minimum Requirements<ul>
<li>
Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs.</li>
<li>Excellent organizational skills and the ability to effectively work under pressure and strict timelines required.</li>
<li>Ability to maintain an effective working relationship with coworkers, including multi-national staff and external and internal customers is required.</li>
<li>Must be able to communicate clearly and concisely orally and in writing to coworkers and customers while maintaining Communication Security (COMSEC), Operational Security (OPSEC) and Computer Security (COMPUSEC).</li>
<li>Will be required to receive training and operate material handling equipment.</li>
<li>Knowledge and understanding of MHE equipment operations and associated hazards required.</li>
<li>Must possess a valid home country driver's license and ability to obtain host nation driver's license.</li>
<li>High School diploma or equivalent required.</li>
<li>Minimum of three years of experience in Traffic Management (TMO)/Air Freight operations or associate degree in a related field of study required.</li>
<li>Experience may include but is not limited to import/export, freight acceptance, preparation, handling, cargo shipping/receiving by surface, sea and air, data records, container management, customer service, cargo operating computer systems or other related experience.</li>
<li>Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures, palletizing cargo on single or multiple 463L pallets using side and top nets, straps, chains and devices for restraint.</li>
<li>Must possess a current HAZMAT Certification in accordance with AFMAN 24-604 or ability to obtain it upon acceptance of the position.</li>
<li>Must be eligible to obtain and maintain a US Secret Security Clearance.</li>
<li>Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed.</li>
<li>Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.</li>
<li>Ability to travel domestically and internationally.</li>
<li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.
</li>
</ul>Preferred Qualifications<ul><li>
Knowledge of related shipping/receiving procedures and the ability to detect/report problems to appropriate personnel preferred.</li></ul> 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Traffic Management Supervisor

Bureau Veritas North America

<div>
 We are a world leader in Testing, Inspection and Certification (TIC) , delivering high quality services to help clients meet the growing challenges of quality, safety, environmental protection and social responsibility.
 
 
 Specialty:
 
 
 
 1- Sound knowledge on fire engineering &amp; life safety inspection and audit.
 
 
 
 
 2- Sound knowledge on relative codes and standards such as SBC (Especially 201 &amp; 801), IBC, IFC, HCIS and NFPA standards.
 
 
 
 
 Education Degree:
 
 
 
 
 
 Bachelor&rsquo;s degree in Fire Protection Engineering or Mechanical/Electrical/Architectural engineering disciplines.
 
 
 
 
 
 
 Technical knowledge:
 
 
 
 
 
 
 Conducting inspections, enforcing fire safety codes, and ensuring compliance with fire prevention regulations, ensuring that all fire protection and life safety systems are compliant with applicable regulations.
 
 
 
 
 
 
 Experience:
 
 
 
 
 
 Minimum 07 To 10 Years&rsquo; Experience In Relevant Position.
 
 
 
 
 
 Primary Functions:
 
 
 
 
 <ul>
 <li>
 Analyses existing protection measures and designs up-to-date fire protection systems.
 </li>
 <li>
 Inspect fire protection equipment and such as extinguishers, hoses, reels, hydrants, fire blankets, exit lighting, fire and smoke doors, gaseous fire suppression systems, passive fire and smoke containment systems and foam generating equipment systems as per Saudi building code and NFPA standards.
 </li>
 <li>
 Conduct inspection to ensure compliance with all relevant National Fire Protection Association (NFPA) Codes and standards or equivalent standards.
 </li>
 <li>
 Conduct functional tests and inspections on the following: Fire Detection and Alarm Systems, Fixed Fire Suppression Systems and on portable fire extinguishers to ensure that the standards are met and maintained
 </li>
 <li>
 Carry out inspection of constructions works to ensure that fire safety is not compromised, and that standards are maintained or improved.
 </li>
 <li>
 Produce detailed reports of fire inspections performed with any faults or code violations observed and corrective recommendations offered, or any necessary additional work required.
 </li>
 <li>
 Conduct fire code compliance follow-ups to ensure the corrective actions have been implemented in the cases where violations were found.
 </li>
 <li>
 Conduct follow up inspections to rectify faults observed/reported by staff which are outside of the Fire Protection Services department.
 </li>
 <li>
 Carry out a "Quality Assurance" function by conducting spot inspections to ensure that the relevant National Fire Protection Association (NFPA) Codes and standards or equivalent standards are maintained.
 </li>
 <li>
 Performing risk assessments and developing strategies to mitigate fire hazards in different environments.
 </li>
 <li>
 Developing and implementing fire pre-plan.
 </li>
 <li>
 Investigating fire incidents
 </li>
 <li>
 Lead fire drills programTechnical Expertise:
 </li>
 <li>
 ***MUST &ndash; certified fire protection specialist (CFPS) certification or Equivalent.
 
 
 </li>
 </ul>
 SHAPING A WORLD OF TRUST - WHAT WE VALUE AT BV
 
 
 We create trust between businesses and we are committed to cultivating an open and inclusive environment wherever we operate and so do our employees. Being part of the BV family is more than just working, it&rsquo;s being convinced that you will leave your mark&hellip;. in shaping a world of trust.
</div>

Inspector ,Fire Protection

Metromac Marine Automation FZE

Positions :i) Marine Service Engineer &ndash; Automationii) Marine Service Engineer &ndash; ElectricalLocation: Dubai, United Arab Emirates Employment Type: Full-time Experience Required: 8+ years in marine engineering with specific expertise in automation and control systemsAbout the Role: We are looking for a skilled Marine Service Engineers with over 10 years of experience specializing in boiler automation, pneumatic controls, tank gauging, gas detection, and inert gas systems. This role is essential in ensuring the seamless operation and safety of marine equipment and systems on various vessels. The ideal candidate will have a robust technical background in marine automation and control systems, with the ability to diagnose, troubleshoot, and repair these critical systems in both onshore and offshore settings.Eligibility Criteria:<ul><li>Diploma/Bachelor&rsquo;s/Master&rsquo;s in Engineering or a related technical field (preferred)</li><li>Minimum of 8 years of hands-on experience in marine service engineering, with specialized knowledge in boiler automation, pneumatic controls, tank gauging, gas detection, and inert gas systems</li><li>Strong experience in automation or electrical maintenance, troubleshooting, and commissioning of marine systems</li><li>Sailing experience and onboard maintenance exposure will be considered a strong advantage</li><li>Deep understanding of marine safety, environmental standards, and compliance protocols</li><li>Strong analytical and troubleshooting skills with the ability to solve complex technical issues</li><li>Excellent communication skills to effectively interact with clients and team members</li><li>Valid certifications related to marine engineering, safety, or relevant technical skills are advantageous</li><li>Willingness to travel extensively for offshore/onshore support and work flexible hours based on job requirements</li></ul>Candidates who have experience in maintenance, troubleshooting, and commissioning of Automation or Electrical Systems are encouraged to apply.Job Types: Full-time, PermanentPay: From RO400.000 per monthExperience:<ul><li>Marin Automation or Electrical: 7 years (Required)</li></ul>

Marine Service Engineer

Nobles Marine Tours

We are seeking a proactive and detail-oriented Facilities Administrator to join our team. The ideal candidate will be responsible for coordinating and overseeing facilities operations, ensuring smooth maintenance and management of building systems, and supporting the technical and administrative requirements of the organization.Key Responsibilities:<ul><li>Supervise, coordinate, and monitor day-to-day facilities operations.</li><li>Manage preventive and corrective maintenance activities across all facility systems (Civil/Mechanical/Electrical).</li><li>Liaise with contractors, vendors, and service providers to ensure quality and timely execution of services.</li><li>Prepare and maintain documentation, reports, and records related to facilities management.</li><li>Ensure compliance with safety, health, and environmental standards.</li><li>Assist in budgeting, procurement, and contract management for facility-related services.</li><li>Support management in planning upgrades, refurbishments, and new installations.</li><li>Provide strong administrative and technical support to ensure operational efficiency.</li></ul>Qualifications &amp; Skills:<ul><li>Education: Bachelor&rsquo;s Degree in Civil, Mechanical, or Electrical Engineering (mandatory).</li><li>Experience: Minimum 3&ndash;5 years&rsquo; proven experience in Facilities Management within the GCC.</li><li>Strong communication and interpersonal skills.</li><li>Proficiency in computer applications (MS Office, Facility Management Software, etc.).</li><li>Excellent organizational and problem-solving skills.</li><li>Ability to handle multiple tasks and work under pressure.</li></ul>Job Type: Full-time

Facilities Administrator

Explore 531+ Aircraft electrical and environmental specialist f 16 in Oman this October. Find roles across top companies and apply now to boost your career.