aircraft technical inspector (ch-47) - buehring, kuwait

aviation ground support equipment mechanic - camp arifjan, kuwait

aviation life support equipment (alse) technician - buehring, kuwait

abercrombie & fitch / hollister - assistant store manager, kuwait

aircraft technical inspector (ch-47) - buehring, kuwait Jobs in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

atc specialist, liaison - cic Jobs in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

atc specialist, liaison - cic

aviation ground support equipment mechanic - camp arifjan, kuwait Jobs in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

aviation life support equipment (alse) technician - buehring, kuwait Jobs in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

ac technician Jobs in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

ac technician

aircraft servicer

Amentum

<div>The Aircraft Servicer services aircraft, performing any combination of the following tasks, directs incoming and outgoing aircraft near terminal or flight line parking area to assist pilot's maneuvering of the aircraft on ground, using hand or light signals or drives light truck with guiding sign, and secures aircraft in parking position with aircraft wheel chocks, installs landing gear and safing pins.<div><div><div><div><div> 

Principal Accountabilities
 
(Typical duties include the following, although specific duties vary by assignment or contract) 
<ul><li>Operates service vehicles to replenish water, waste system chemicals (at select locations).</li><li>Assists with refueling, defueling and towing aircraft (tow vehicle operator).</li><li>Operates ground support equipment such as electrical power carts, engine starting carts, air conditioning carts, nitrogen carts, oil and hydraulic carts for serving aircraft.</li><li>Examines tires for specified air pressure and condition.</li><li>Positions boarding platforms to unload or load aircraft passengers (stair case truck).</li><li>De-ice aircraft wings and assemblies (select locations).</li><li>Extract engine oil samples when required and provide to NDI for analysis.</li><li>Coordinates via land mobile radio with air traffic control for follow me and towing of aircraft to designated parking spots.</li><li>Retrieve Drag chutes and return to owning maintenance unit.</li><li>Coordinates with base supply in ordering parts for aircraft.</li><li>Perform other duties as assigned.</li></ul></div><div> 

Knowledge &amp; Skills
 
<ul><li>Ability to communicate effectively both orally and in writing</li><li>Knowledge of safety and security regulations, practices, and procedures</li><li>Additional knowledge/skill requirements may be required by assignment or contract</li></ul></div><div> 

Experience &amp; Education
 
<ul><li>Federal Aviation Administration (FAA) airframe / Power plant license or DD 214 with documentation reflecting aircraft maintenance experience.</li><li>High school diploma or equivalent</li><li>Additional experience/education may be required by assignment or contract</li></ul></div>

<div>Physical Requirements/Working Environment
 
<ul><li>Living and working conditions at assignment location could be remote and uncomfortable</li><li>Long hours, exposure to weather, dust, and hazardous/harsh conditions</li><li>Personnel should be aware of moving on short notice and under adverse condition</li></ul></div>
<ul><li>Must be able to obtain and maintain a Secret Clearance; note: US Citizenship is required to obtain a Secret Clearance</li></ul> 

Travel
<ul><li>Ability to travel domestically and internationally</li></ul></div></div></div></div> 
Compensation Details:
75000 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/19/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aircraft Servicer

<div><div>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</div><div><div><div><div><div><div><div><div><div>
<ul>
<li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li>
<li>
Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li>
<li>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</li>
<li>
Safely prepare aircraft for inspections and maintenance checks and services.</li>
<li>
Perform scheduled inspections and assist in performing special inspections.</li>
<li>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</li>
<li>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</li>
<li>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</li>
<li>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Perform other duties as requested.</li>
</ul>
Minimum Requirements:
<ul>
<li>High School Diploma or Equivalent is required.</li>
<li>
With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</li>
<li>
All experience must be within the Five (5) most recent years.</li>
<li>
Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</li>
<li>
All experience must be within the Six (6) most recent years.</li>
<li>
U.S. Military Technical school or specialized training course is desired, certification of education level is required.</li>
<li>
A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li>
<li>
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li>
<li>
Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li>
</ul>
Security Clearance Requirements:
<ul><li>
Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li></ul>

Additional and Preferred Qualifications:
<ul>
<li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li>
<li>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</li>
<li>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li>
<li>
Working knowledge of technical publications and Logistics Information Systems.</li>
<li>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li>
<li>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li>
</ul>
Physical Requirements/Working Environment
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>
May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>
Will handle dirty parts and lubricants.</li>
<li>
Will be required to wear proper Personal Protective Equipment (PPE).</li>
<li>
Must be able to pass a Respirator Physical and Fit Test qualification.</li>
<li>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions</li></ul></div></div></div></div></div></div></div></div></div> 
Compensation Details:
Not Applicable 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/18/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

<div>Essential Responsibilities:
The designee is responsible for maintaining situational awareness of airfield activities and overall
responsibility for AMOPS section while on duty to provide a safe, efficient, and effective airfield environment for aircraft operations. The designee performs airfield inspections and checks for safety and compliance with planning and design criteria. Plans, organizes, and directs airfield activities to include airfield construction/repairs, airfield driving program, ice/snow removal operations, Bird/Wildlife control, etc. Procures, maintains, and produces information on safe operation of aircraft through the national and international airspace system such as Flight Information Publications, aeronautical charts and maps, NOTAM, local airfield and navigational aid status, and weather information. Process domestic and international flight plans. Coordinates with base agencies to meet
aircrew requirements for billeting, messing, refueling, transportation, and transient aircraft maintenance.
Minimum Position Knowledge, Skills, and Abilities Required:<ul>
<li>
Graduate of an approved DoD/Airfield Managers course or equivalent and aviation related experience as aircrew/dispatcher/flight follower with a 14 CFR Part 121 or 14 CFR Part 135 operator.</li>
<li>Four (4) years of experience to include the following: Duties including supervision and coordination between air-traffic control and maintenance personnel, dispatching, implementing and enforcing airfield safety procedures; monitoring and maintaining flight records; applying knowledge of weather information, flight plan processing, flight following procedures, tracking aircraft movements, managing wildlife on and around airfield grounds, and implementing bird aircraft strike hazard procedures. Coordinating airfield maintenance and construction projects. Coordinating hazardous cargo and live fire devices, responding to aircraft emergencies, and conducting airfield inspections in accordance with AFMAN 13-204v2.</li>
<li>Requirements IAW AFMAN 13-204v1 Chapter 7 and AFMAN 13-24v2 Chapter 2.</li>
</ul><ul><li>Must be able to maintain a US Secret Security Clearance. NOTE: US Citizenship is required to obtain/maintain US Secret Security Clearance.</li>
<li>Ability to obtain and maintain a US CENTCOM Medical Exam</li></ul></div>

AM Shift Lead (AMSL)

<div>
 The
 
 CH47 Aircraft Technical Inspector
 
 is responsible for maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment.
 
 
 <ul>
 <li>
 Inspect, remove, install, repair, replace, modify, disassemble, reassemble, and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications.
 </li>
 <li>
 Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.
 </li>
 <li>
 Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data.
 </li>
 <li>
 Review and approve locally developed procedures and solutions to complex repair situations.
 </li>
 <li>
 Perform analysis of defects and interprets quality control rejection and failure trends.
 </li>
 <li>
 Monitor safety, training, and certification requirements.
 </li>
 <li>
 Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.
 </li>
 <li>
 Monitor tool control programs, inspects, and maintains records to ensure that measuring and test equipment meets calibration requirements.
 </li>
 <li>
 Maintain Quality, Safety, Training and Certification Records.
 </li>
 <li>
 Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.
 </li>
 <li>
 Inspect forms and records related to aircraft maintenance.
 </li>
 <li>
 Perform other qualified duties as assigned.
 
 
 </li>
 </ul>
 
 Minimum Requirements
 
 :
 
 
 <ul>
 <li>
 High School Diploma or equivalent required.
 </li>
 <li>
 Shall have five years of recent applicable aircraft maintenance experience.
 </li>
 <li>
 Shall have at least one-year experience inspecting CH47 aircraft assigned.
 </li>
 <li>
 U.S. military technical school or specialized training course is desired, certification of education level is required.
 </li>
 <li>
 Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).
 </li>
 <li>
 If no A&amp;P, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.
 </li>
 <li>
 Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.
 </li>
 <li>
 Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 2 plus year validity on expiration date of passport at the time of hiring.
 </li>
 <li>
 Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location.
 </li>
 <li>
 Must be able to pass Army MOD Medical for deployment.
 </li>
 <li>
 Must be able to obtain Kuwait Visa.
 
 
 </li>
 </ul>
 
 Knowledge &amp; Skills
 
 
 
 <ul>
 <li>
 Possess good communication skills; be adaptable, diversified, and capable of troubleshooting entire aircraft system.
 </li>
 <li>
 Working knowledge of electrical, electronic, mechanical, and associated systems principles to complete properly all probable work tasks.
 </li>
 <li>
 Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.
 </li>
 <li>
 Able to determine when faulty systems or assemblies can be corrected through repair of replacement of new parts and the nature and extent of repair required.
 </li>
 <li>
 Must have skill in reading, applying, and interpreting technical data.
 
 
 </li>
 </ul>
 
 Physical Requirements/Working Environment
 
 
 
 <ul>
 <li>
 Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
 </li>
 <li>
 Must be able to lift/push/pull minimum of 50 pounds.
 </li>
 <li>
 May work in maintenance shop or outside.
 </li>
 <li>
 Must be able to work in a shop where the environment is drafty, noisy, and dirty.
 </li>
 <li>
 May be exposed to extreme noise from operating equipment.
 </li>
 <li>
 May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
 </li>
 <li>
 May be expected to work in austere environments and all-weather conditions.
 
 
 </li>
 </ul>
 
 Compensation Details:
 
 
 
 Not Applicable
 
 
 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
 
 
 
 Benefits Overview:
 
 
 
 Our health and welfare benefits are designed to support you and your priorities. Offerings include:
 
 
 <ul>
 <li>
 Health, dental, and vision insurance
 </li>
 <li>
 Paid time off and holidays
 </li>
 <li>
 Retirement benefits (including 401(k) matching)
 </li>
 <li>
 Educational reimbursement
 </li>
 <li>
 Parental leave
 </li>
 <li>
 Employee stock purchase plan
 </li>
 <li>
 Tax-saving options
 </li>
 <li>
 Disability and life insurance
 </li>
 <li>
 Pet insurance
 
 
 </li>
 </ul>
 
 Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
 
 
 
 
 Original Posting:
 
 
 
 02/19/2026 - Until Filled
 
 
 Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
 
 
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>

Aircraft Technical Inspector (CH-47) - Buehring, Kuwait

<div>The CH47 Aircraft Technical Inspector is responsible for maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment.<ul>
<li>
Inspect, remove, install, repair, replace, modify, disassemble, reassemble, and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications.
</li><li>Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.</li>
<li>
Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data.</li>
<li>
Review and approve locally developed procedures and solutions to complex repair situations.</li>
<li>
Perform analysis of defects and interprets quality control rejection and failure trends.</li>
<li>
Monitor safety, training, and certification requirements.</li>
<li>
Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.</li>
<li>
Monitor tool control programs, inspects, and maintains records to ensure that measuring and test equipment meets calibration requirements.</li>
<li>
Maintain Quality, Safety, Training and Certification Records.</li>
<li>
Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.</li>
<li>
Inspect forms and records related to aircraft maintenance.</li>
<li>
Perform other qualified duties as assigned.</li>
</ul>
Minimum Requirements:<ul>
<li>
High School Diploma or equivalent required.</li>
<li>
Shall have five years of recent applicable aircraft maintenance experience.</li>
<li>
Shall have at least one-year experience inspecting CH47 aircraft assigned.</li>
<li>
U.S. military technical school or specialized training course is desired, certification of education level is required.</li>
<li>
Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</li>
<li>
If no A&amp;P, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.</li>
<li>
Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.</li>
<li>
Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 2 plus year validity on expiration date of passport at the time of hiring.</li>
<li>
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location.</li>
<li>
Must be able to pass Army MOD Medical for deployment.</li>
<li>
Must be able to obtain Kuwait Visa.</li>
</ul>
Knowledge &amp; Skills
<ul><li>Possess good communication skills; be adaptable, diversified, and capable of troubleshooting entire aircraft system.</li>
<li>
Working knowledge of electrical, electronic, mechanical, and associated systems principles to complete properly all probable work tasks.</li>
<li>
Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.</li>
<li>
Able to determine when faulty systems or assemblies can be corrected through repair of replacement of new parts and the nature and extent of repair required.</li>
<li>
Must have skill in reading, applying, and interpreting technical data.</li>
</ul>
Physical Requirements/Working Environment<ul>
<li>
Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions.</li></ul> 
Compensation Details:
Not Applicable 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/19/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

<div>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices.
Principal Accountabilities<ul>
<li>
Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</li>
<li>
Inspects, instructs, services and certifies individual and crew equipment</li>
<li>
Order, receive and inventory kits and components</li>
<li>
Resolve shipping discrepancies</li>
<li>
Ensure proper fit of crew member clothing</li>
<li>
Maintain ALSE and NVD for DoS and DI personnel</li>
<li>
Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals</li>
<li>
Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment</li>
<li>
Perform other duties as assigned.</li>
</ul>
Minimum Requirements:<ul>
<li>
High School diploma or equivalent is required.</li>
<li>
One (1) year verifiable experience as an ALSE Technician.</li>
<li>
Must possess a certificate of training as a school trained ALSE Technician.</li>
<li>
Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li>
<li>
Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li>
<li>
Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li>
<li>
Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li>
</ul>
Knowledge &amp; Skills
<ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred).</li>
<li>
Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li>
<li>
Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li>
<li>
Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li>
<li>
Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li>
<li>
Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li>
<li>
Must have knowledge of life support equipment maintenance tools and tool control procedures.</li>
<li>
Must knowledgeable of principles of instruction.</li>
<li>
Must have knowledge of seat kit survival components.</li>
<li>
Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li>
<li>
The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li>
<li>
Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li>
</ul>
Physical Requirements/Working Environment<ul>
<li>
Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li>
<li>
Must be able to climb stairs, ramps, and ladders and work stands.</li>
<li>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>
May be required to carry, push or pull up to 50 pounds.</li>
<li>
May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li>
<li>
Must be able to communicate by voice and detect sounds</li>
<li>
Must be able to distinguish color and judge three dimensional depths.</li>
<li>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li>
<li>
Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li>
<li>
Be able to travel to and between remote location(s)</li>
<li>
Travel to austere or inhospitable high stress environments may be required.</li>
<li>
Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li>
<li>
May be exposed to extreme noise from turbine and jet engine aircraft.</li>
<li>
May be exposed to fumes or airborne particles</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li>
<li>
Will be exposed to surface obstructions (ladders, stairs, etc.)</li>
<li>
May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul> 
Compensation Details:
Not Applicable 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/19/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aviation Life Support Equipment (ALSE) Technician - Buehring, Kuwait

<div>
 The
 
 Aviation Life Support Equipment (ALSE) Technician
 
 serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices.
 
 
 
 Principal Accountabilities
 
 
 
 <ul>
 <li>
 Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.
 </li>
 <li>
 Inspects, instructs, services and certifies individual and crew equipment
 </li>
 <li>
 Order, receive and inventory kits and components
 </li>
 <li>
 Resolve shipping discrepancies
 </li>
 <li>
 Ensure proper fit of crew member clothing
 </li>
 <li>
 Maintain ALSE and NVD for DoS and DI personnel
 </li>
 <li>
 Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals
 </li>
 <li>
 Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment
 </li>
 <li>
 Perform other duties as assigned.
 
 
 </li>
 </ul>
 
 Minimum Requirements:
 
 
 
 <ul>
 <li>
 High School diploma or equivalent is required.
 </li>
 <li>
 One (1) year verifiable experience as an ALSE Technician.
 </li>
 <li>
 Must possess a certificate of training as a school trained ALSE Technician.
 </li>
 <li>
 Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.
 </li>
 <li>
 Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.
 </li>
 <li>
 Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.
 </li>
 <li>
 Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.
 
 
 </li>
 </ul>
 
 Knowledge &amp; Skills
 
 
 
 <ul>
 <li>
 CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred).
 </li>
 <li>
 Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.
 </li>
 <li>
 Must be able to ascertain LSE requirements for a multi-type aircraft environment.
 </li>
 <li>
 Must have knowledge of basic theory of flight and aircraft systems nomenclatures.
 </li>
 <li>
 Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.
 </li>
 <li>
 Must have knowledge of aviation maintenance data systems and associated documentation/forms.
 </li>
 <li>
 Must have knowledge of life support equipment maintenance tools and tool control procedures.
 </li>
 <li>
 Must knowledgeable of principles of instruction.
 </li>
 <li>
 Must have knowledge of seat kit survival components.
 </li>
 <li>
 Must have knowledge of aircrew life raft and life preserver inspections/maintenance.
 </li>
 <li>
 The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment
 </li>
 <li>
 Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.
 
 
 </li>
 </ul>
 
 Physical Requirements/Working Environment
 
 
 
 <ul>
 <li>
 Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.
 </li>
 <li>
 Must be able to climb stairs, ramps, and ladders and work stands.
 </li>
 <li>
 Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
 </li>
 <li>
 May be required to carry, push or pull up to 50 pounds.
 </li>
 <li>
 May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.
 </li>
 <li>
 Must be able to communicate by voice and detect sounds
 </li>
 <li>
 Must be able to distinguish color and judge three dimensional depths.
 </li>
 <li>
 May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.
 </li>
 <li>
 Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.
 </li>
 <li>
 Be able to travel to and between remote location(s)
 </li>
 <li>
 Travel to austere or inhospitable high stress environments may be required.
 </li>
 <li>
 Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.
 </li>
 <li>
 May be exposed to extreme noise from turbine and jet engine aircraft.
 </li>
 <li>
 May be exposed to fumes or airborne particles
 </li>
 <li>
 May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.
 </li>
 <li>
 Will be exposed to surface obstructions (ladders, stairs, etc.)
 </li>
 <li>
 May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.
 
 
 </li>
 </ul>
 
 Compensation Details:
 
 
 
 Not Applicable
 
 
 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
 
 
 
 Benefits Overview:
 
 
 
 Our health and welfare benefits are designed to support you and your priorities. Offerings include:
 
 
 <ul>
 <li>
 Health, dental, and vision insurance
 </li>
 <li>
 Paid time off and holidays
 </li>
 <li>
 Retirement benefits (including 401(k) matching)
 </li>
 <li>
 Educational reimbursement
 </li>
 <li>
 Parental leave
 </li>
 <li>
 Employee stock purchase plan
 </li>
 <li>
 Tax-saving options
 </li>
 <li>
 Disability and life insurance
 </li>
 <li>
 Pet insurance
 
 
 </li>
 </ul>
 
 Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
 
 
 
 
 Original Posting:
 
 
 
 02/19/2026 - Until Filled
 
 
 Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
 
 
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>

Explore 12+ Aircraft servicer in Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City this March. Find roles across top companies and apply now to boost your career.

12 aircraft servicer jobs In Kuwait Jobs In Charge Jobs In Kuwait Jobs In Kuwait City

Aircraft Servicer

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

AM Shift Lead (AMSL)

Aircraft Technical Inspector (CH-47) - Buehring, Kuwait

Aircraft Technical Inspector (CH-47) - Buehring, Kuwait

Aviation Life Support Equipment (ALSE) Technician - Buehring, Kuwait

Aviation Life Support Equipment (ALSE) Technician - Buehring, Kuwait