electrical engineer

civil engineer

mechanical engineer

estimation engineer

senior electrical engineer Jobs in Abu Dhabi

senior electrical engineer

chief mechanical engineer

ADASI

<div>
 
 External Job Description
 
 
 
 
 Position -
 
 Principal Mechanical Engineer - Loads / Stress
 
 
 
 Entity :
 
 ADASI
 
 
 
 Department
 
 -Engineering Services
 
 
 
 Location-
 
 Abu Dhabi
 
 
 
 Key Responsibiities-
 
 
 
 <ul>
 <li>
 Develop aircraft-level loads for UAV systems, including: Maneuver loads (limit and ultimate cases) ,Gust and turbulence loads (where applicable) ,Ground loads (landing, taxi, handling, transportation) ,Propulsion and system-induced loads (thrust, inertia, vibration drivers) Payload and mission-dependent loads
 </li>
 <li>
 Translate mission profiles and operational scenarios into design loads, working closely with Flight Mechanics, Aerodynamics, Systems, and Test teams.
 </li>
 <li>
 Define load cases, combinations, and envelopes, ensuring: Internal consistency across disciplines, Traceability to assumptions and mission definitions ,Practical usability by stress and design teams
 </li>
 <li>
 Establish and document loads methodologies, including: Assumptions and simplifications appropriate for UAV development ,Use of empirical data, hand methods, and analytical models , Clear definition of validity ranges and limitations
 </li>
 <li>
 Perform analytical and numerical loads analysis, using- First-principles calculations (free-body diagrams, inertia relief, load paths) Simplified models (beam models, lumped masses)FEM (primarily for load extraction and distribution, not detailed stress sizing)
 </li>
 <li>
 Provide load inputs to stress, design, and systems teams, including-Section loads, interface loads, and component-level loads ,Time histories or envelopes when required ,Clear definition of coordinate systems and reference conditions
 </li>
 <li>
 Support multidisciplinary integration, ensuring loads are aligned with: Mass properties and CG evolution, Control laws and flight envelope assumptions ,Structural layouts and load paths
 </li>
 <li>
 Contribute to test definition and correlation, including: Ground and flight test instrumentation strategies (strain gauges, accelerometers) Back-calculation of loads from test data ,Updating models and assumptions based on test evidence
 </li>
 <li>
 Act as a situational technical leader by driving resolution of ambiguous or conflicting inputs ,Challenging unrealistic assumptions ,Providing technically sound direction during design reviews and critical decisions
 </li>
 <li>
 Continuously improve engineering practices, contributing to: Loads process definition and refinement templates, calculation methods, and internal guidelines , Knowledge sharing across programs
 
 
 </li>
 </ul>
 
 Educational Background
 
 :
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical or Aerospace Engineering (Master&rsquo;s or PhD preferred)
 
 
 </li>
 </ul>
 
 Professional Experience:
 
 
 
 <ul>
 <li>
 Strong understanding of aircraft loads development, including maneuver, gust, and ground loads
 </li>
 <li>
 Ability to translate real-world missions into engineering load cases, avoiding over-idealization
 </li>
 <li>
 Solid grasp of:
 
 
 </li>
 </ul>
 Rigid-body dynamics and inertia effects
 
 
 Load paths and structural interaction
 
 
 <ul>
 <li>
 Basic aeroelastic considerations (at least at conceptual level)
 </li>
 <li>
 Experience with: Analytical tools (Excel, Python, MATLAB or similar) FEM tools (ANSYS, NASTRAN, Abaqus) for load extraction and distribution
 </li>
 <li>
 Comfortable working with incomplete data, making justified engineering assumptions
 
 
 </li>
 </ul>
 Standards &amp; Compliance
 
 
 <ul>
 <li>
 Familiarity with aerospace standards (EASA, FAA, MIL-STD) as guidance frameworks, with the ability to scale and adapt them to UAV and non-certified platforms
 
 
 </li>
 </ul>
 
 Preferred Certifications
 
 
 
 <ul>
 <li>
 Chartered Engineer (CEng) or Professional Engineer (PE) (nice to have)
 </li>
 <li>
 Experience contributing to internal methods, tools, or engineering processes
 
 
 </li>
 </ul>
 
 #ADASI
 
</div>

Principal Mechanical Engineer - Loads / Stress

Transpo Group Middle East

Our client is a leading architectural and engineering consultancy in the Middle East, this firm specializes in providing a wide range of services to the construction industry. With a focus on innovative modern design, the firm caters to a diverse client base by offering bespoke solutions tailored to individual needs. Services include architectural design, structural, electrical, and mechanical design, quantity surveying, construction management, tendering &amp; contracts, and site supervision. Supported by a skilled team of senior architects, engineers, designers, and project managers, the firm is led by a management team focused on delivering exceptional service. With a proven record in residential, commercial, hospitality, educational, and sports facility designs, the firm is known for offering value engineering and technical support to developers and the construction industry.​​​​​Role Overview:We are seeking a highly experienced and detail-oriented Senior Mechanical Engineer to join their Abu Dhabi team. The ideal candidate will lead the design, coordination, and delivery of mechanical systems across a diverse portfolio of projects, ensuring compliance with UAE authority regulations and international standards.Key Responsibilities:<ul><li>Lead the design and development of mechanical systems including HVAC, plumbing, drainage, and firefighting systems</li><li>Prepare and review mechanical design calculations, drawings, specifications, and reports</li><li>Ensure all designs comply with UAE authority regulations (DEWA, ADDC, Civil Defense, etc.) and international standards</li><li>Coordinate closely with architects, structural engineers, and other MEP disciplines to ensure integrated design delivery</li><li>Review and approve shop drawings, material submittals, and technical documentation</li><li>Conduct design reviews, value engineering, and optimization of mechanical systems</li><li>Participate in client meetings, technical presentations, and authority coordination</li><li>Support construction supervision teams by responding to RFIs and resolving on-site technical issues</li><li>Monitor project progress and ensure timely delivery within budget and quality standards</li><li>Mentor and guide junior engineers and design staff</li></ul>Requirements:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering (Master&rsquo;s preferred)</li><li>Minimum 12 years of experience in mechanical engineering within consultancy environments</li><li>Proven experience working on high-rise buildings, mixed-use, residential, commercial, or hospitality projects</li><li>Strong knowledge of HVAC design, chilled water systems, ventilation, plumbing, and firefighting systems</li><li>In-depth understanding of UAE codes, authority requirements, and approval processes</li><li>Proficiency in software such as HAP, Elite, AutoCAD, Revit MEP, and other design tools</li><li>Familiarity with international standards such as ASHRAE, NFPA, and local codes</li><li>Strong coordination, communication, and problem-solving skills</li></ul>Preferred Qualifications:<ul><li>Preferred: Abu Dhabi engineering registration / DMT / municipality license</li><li>Experience working on GCC projects (UAE experience highly preferred)</li><li>Knowledge of sustainability standards and energy-efficient design (e.g., Estidama, LEED)</li><li>Experience in BIM coordination and multidisciplinary collaboration</li></ul>Application Question(s):<ul><li>Did you include the projects you worked on in your CV?</li><li>Did you include your latest CV in your application?</li><li>Do you have HVAC design, chilled water systems, ventilation, plumbing, and firefighting systems?</li></ul>Education:<ul><li>Primary (Preferred)</li></ul>Experience:<ul><li>architectural design coordination: 10 years (Required)</li><li>HAP, Elite, AutoCAD, Revit MEP: 5 years (Preferred)</li><li>UAE codes, authority requirements, approval processes: 5 years (Preferred)</li><li>hirise, mixed-use, residential, hospitality projects: 10 years (Required)</li></ul>Work Location: In person

Senior Mechanical Engineer

NMDC Group

<div>2nd W/K Engineer for Dredging Fleet.</div>
 <div>RESPONSABILITIES: Assist the Chief Engineer to execute the implementation of the maintenance schedule and spare parts requirements in accordance with plans and technical specifications 
Assist the Chief Engineer in ensuring optimal and safe performance of the vessel by operating and maintaining the engine room in the most effective way. During the night shift, be operationally and responsible 
Work and act according to defined policies and procedures of the Technical Department 
Report to the Chief Engineer on work done/performance, issues, and (preventive) maintenance requirements 
Ensure and provide guidance in the execution of basic and instant repairs onboard 
Provide the Chief Engineer with input on the day-to-day performance of equipments onboard 
Ensure and monitor compliance with HSE (Health, Safety, and Environment) requirements in the engine room 
Report to the Chief Engineer on any failure or maintenance requirements that may affect the performance of the dredge 
Work efficiently and constructively in cooperation with technical staff, Senior Dredge Masters, and operational crew 
Implimentation of a preventive maintenance program for marine engines/engine room and other equipment, including related marine equipment 
Provide guidelines to junior staff on QA/QC and HSE reports/recommendations 
Identify hazards and cordinate with superiors for Rectification. 
Follow information and Observations from the HSE Department 
Make recommendations to the HSE Department 
Ensure correct receipt of items in pickings list and proper storage of received items. 
Ensure all maintenance activites (planned/unplanned) are recorded in oracle via work orders; and ensure that these work orders are closed correctly accordingly. 
repare daily, weekly and Monthly reports related to the Dredger and Communicate with all concerned 
Capable of performing all duty of Watch keeping (Day/Night) and able to take decesion in critical situation to Mitigate any risk or failure machineries of the Vessel. 
 
This is a generalist view of a job that you have been assigned. At times, you will be asked to do above and beyond the scope of this role due to operational requirements</div>
 <div>QUALIFICATIONS: Bachelor's degree in marine/mechanical engineering. 
 
Minimum 5 years' experience as W/K Engineer onboard Dredgers.</div>
 <div>ABOUT US: DEVELOP YOUR CAREER WITH INDUSTRY LEADERS 
 
NMDC Group is always looking for talented individuals to join our team. We know that our people are fundamental to our success as a business, which is why we support their career development and personal wellbeing in every way we can. 
 
NMDC Group offers an environment where every employee can thrive and reach their professional potential. Nothing is more important to us than ensuring every employee feels valued and respected in their roles, and able to progress in their career through training, mentorship, and educational opportunities. 
 
With a wide range of attractive employee benefits and competitive salaries, we have created a workplace defined by its culture, and made by its people. If you have a passion for EPC and marine construction and want to work on some of the region&rsquo;s most exciting projects, find your next challenge with us.</div>

2ND W/K ENGINEER

POWERFULL TEAM GEN. MAINT. AND CONT.

Duties and responsibilities:<ul><li>Conducting performance check of all Mechanical fittings in work site and assuring safety</li><li>Planning new Mechanical installations and maintenance of existing ones</li><li>Supervising site workers during installation process</li><li>Preparing estimates of finances and resources required for new projects</li><li>Ensure quality in accordance with the set standards of the company.</li><li>Authenticating various aspects of mechanical engineering works</li><li>Reporting to Project Head if discrepancies in safety measures or installation procedures are found and take steps to solve the problem</li><li>Make suggestions and recommend changes in the existing systems to improve efficiency</li><li>Keep track of the finances involved while the project is underway</li><li>Take steps to improve the efficiency of the department</li><li>Keeping up-to-date in the field of electrical engineering and implement development wherever possible</li><li>May have to meet clients to understand their requirements</li></ul>Skills and specifications<ul><li>Thorough knowledge regarding concepts of mechanical engineering</li><li>Thorough knowledge in firefighting and HVAC</li><li>Good communication skills and leadership qualities</li><li>Excellent analysis and mathematical ability</li><li>Must be precise and thorough in working</li><li>Good planning and organization aptitudes</li><li>Excellent troubleshooting skills</li><li>Ability to work for longer hours when required in projects</li></ul>Education and qualification<ul><li>Must have bachelor degree in Mechanical Engineering</li><li>Must have at least 3 years UAE work experience on the same field</li></ul>Job Type: Full-timeAbility to commute/relocate:<ul><li>Abu Dhabi: Reliably commute or willing to relocate with an employer-provided relocation package (Required)</li></ul>License/Certification:<ul><li>UAE Driving License (Required)</li></ul>Work Location: In person

Penspen

<div><div>Job Opportunity: Senior Construction Engineers (Mechanical / Civil / Electrical) &ndash; PMC Role

We are currently hiring experienced Senior Construction Engineers for a PMC role gas based project in Abu Dhabi.
<div></div>
Positions Available:
<ul><li>Senior Construction Engineer &ndash; Mechanical</li>
<li>Senior Construction Engineer &ndash; Civil</li>
<li>Senior Construction Engineer &ndash; Electrical</li>
</ul><div></div>Key Responsibilities:
<ul><li>Supervise and manage construction activities at site in line with project specifications, procedures, and schedule</li>
<li>Ensure compliance with project HSE policies and international standards</li>
<li>Coordinate with EPC contractors, vendors, and client representatives</li>
</ul><div></div>Requirements:
<ul><li>Bachelor&rsquo;s Degree in relevant Engineering discipline (Mechanical / Civil / Electrical)</li>
<li>Minimum 15 years of experience in oil &amp; gas construction projects</li>
<li>Mandatory experience in PMC roles on large-scale projects</li>
<li>Strong experience in LNG / GAS Based preferred</li>
<li>Familiar with international codes &amp; standards (ASME, API, ASTM, IEC, etc.)</li>
<li>Excellent coordination, communication, and leadership skills</li>
<li>Previous experience with ADNOC projects will be an advantage</li></ul> 


if interested, please click the link below:

https://careers.penspen.com/vacancy/senior-construction-engineers-mechanical-civil-electrical-609615.html

 #L1-SANDHYA</div></div>

Senior Construction Engineers (Mechanical / Civil / Electrical)

HK Advanced Electromechanical Contracting LLC

Mechanical Engineer | UAEWe are looking for a skilled Mechanical Engineer to join our team in the UAE.Requirements:<ul><li>Bachelor&rsquo;s degree in Mechanical Engineering</li><li>3&ndash;6 years of relevant experience</li><li>Experience in MEP / HVAC / construction projects preferred</li><li>Proficiency in AutoCAD (Revit is a plus)</li><li>Strong knowledge of site execution and coordination</li><li>UAE experience is an advantage</li></ul>Responsibilities:<ul><li>Design, review, and supervise mechanical systems</li><li>Coordinate with project teams and contractors</li><li>Ensure compliance with project specifications and standards</li><li>Manage site activities and technical documentation</li></ul>We welcome qualified candidates who are ready to contribute and grow with our organization.Job Type: Full-timeWork Location: In person

Mechanical Engineer

<div><div>Penspen is looking for a Lead engineer, Construction - Mechanical for one of the PMC projects in Abu Dhabi.

A Lead Mechanical Construction Engineer oversees site execution, technical submittals, and MEP installations (HVAC, plumbing, fire protection, piping)

Qualification Required
<ul>
<li>An Engineering Degree in Mechanical or related field from a recognized University.</li>
</ul>
Experience Required
<ul>
<li>Minimum 18 years of experience in which 10 years should be in the MEGA oil and gas processing projects</li>
<li>10+ years in mechanical construction, with at least 3 years in a leadership role.</li>
<li>Strong knowledge of HVAC, plumbing, fire protection, and piping systems, as well as software like AutoCAD and Revit MEP.</li>
<li>ADNOC experience is an added advantage.</li>
</ul>
##LI-VV1</div></div>

Lead engineer, Construction - Mechanical

Explore 376+ Chief mechanical engineer in Abu Dhabi this May. Find roles across top companies and apply now to boost your career.

376 chief mechanical engineer jobs In Abu Dhabi

Principal Mechanical Engineer - Loads / Stress

Senior Mechanical Engineer

2ND W/K ENGINEER

Senior Mechanical Engineer

Senior Construction Engineers (Mechanical / Civil / Electrical)

Mechanical Engineer

Lead engineer, Construction - Mechanical