electrical engineer

planning engineer

project engineer

industrial electrician

mechanical engineer

industrial engineer

Merit for Economic and Management Consultancy

The candidate will be responsible for supporting the consultant and participates in the redesign and re-engineering of operational processes via:- Carry out gap analysis and assessment of the effectiveness of organization policies, procedures and standards to assurance that required laws, regulations, policies and procedures are fulfill expected results.- Identifies and gathers business process need and customer requirements of policy and procedure impacts.- Map business procedures and processes and consider correlating business results and Design required forms.Job Type: Full-timeExperience:<ul><li>Process mapping: 3 years (Required)</li></ul>Language:<ul><li>Arabic (Required)</li></ul>

Industrial Engineer

Electro Mechanical Co LLC

Key Responsibilities &ndash;<ul><li>Plan, schedule, and monitor daily production activities for GI sheet punching, bending, and fabrication processes.</li><li>Ensure production is carried out as per approved manufacturing drawings and process guidelines.</li><li>Coordinate with the Factory Manager and team leaders/assembly team to maintain smooth workflow and on-time delivery.</li><li>Plan, schedule and arrange delivering of powder coating materials with proper segregation and identification.</li><li>Ensure the paint shade and coating thickness matching the specifications in coordination from QA/QC Team.</li><li>Ensure all components produced meet dimensional accuracy and quality standards.</li><li>Implement in-process quality checks and corrective actions to minimize rework and material wastage.</li><li>Collaborate with the Quality Control team to ensure compliance with company and client specifications.</li><li>Support continuous improvement initiatives to enhance product quality and process reliability.</li><li>Coordinate with the Assembly department for timely delivery of fabricated panels and components.</li><li>Communicate technical clarifications, design issues, or material shortages to relevant departments.</li><li>Support the logistics to ensure timely material availability and dispatch readiness.</li><li>Ensure all production activities comply with company safety procedures and HSE regulations.</li><li>Conduct or participate in daily toolbox talks and ensure safe work practices in Production/Fabrication area</li><li>Report unsafe acts, equipment defects, or near-misses promptly to the Factory In-Charge or HSE Officer.</li><li>Maintain daily production records, machine utilization logs, and manpower allocation reports.</li><li>Track and report production progress, delays, and quality deviations to management.</li><li>Assist in updating standard operating procedures (SOPs) and work instructions for key processes.</li><li>Participate in root cause analysis for production or quality issues and propose corrective actions.</li><li>Support cost reduction and productivity improvement initiatives.</li><li>Stay updated on new fabrication technologies, tools, and methods relevant to switchgear manufacturing.</li></ul>Qualifications &amp; Skills<ul><li>Degree in Mechanical Engineering.</li><li>Minimum 7-10 years of experience in switchgear factory as production engineer.</li><li>Strong knowledge of safety standards and procedures in an industrial environment.</li><li>Excellent leadership, communication, and problem-solving skills.</li><li>Ability to motivate and guide teams toward achieving production and safety goals.</li></ul>Job Type: Full-time

Production Engineer

CARACAL

<div>
 
 About CARACAL:
 
 
 
 Headquartered in Abu Dhabi, CARACAL is the regional leader in small arms manufacturing. We build high-quality next-generation firearms in state-of-the-art facilities, using some of the world&rsquo;s best CNC machines, QC equipment, and moulding technologies. Every phase of our manufacturing process ensures our products comply with rigorous international standards, such as NATO and CIP. Advanced technologies, including additive manufacturing and CAD / CAM, are at the core of our design and prototyping processes. We continually enhance our weapons so they remain aligned with the evolving mission requirements of our customers. As a result, our products provide those on the front lines with the firepower they need for mission success.
 
 
 
 Core Accountabilities
 
 
 
 <ul>
 <li>
 Review, evaluate, and develop inspection methods by applying sound engineering principles in fixture and special gauges design to ensure efficiency and reliability of inspection methods.
 </li>
 <li>
 Analyze and plan work force utilization, space requirements, and workflow, and design layout of equipment and workspace for maximum efficiency and product flow. Must apply Lean principles.
 </li>
 <li>
 Confer with planning and design staff concerning product design and tooling to ensure efficient and reliable inspection methods. Study specifications, engineering drawings and shop data and confer with engineering and shop personnel to ensure product conformance.
 </li>
 <li>
 Establish work instructions to documents and describe the inspection methods.
 </li>
 <li>
 Perform gauge&rsquo;s reliability and reproducibility (R&amp;R) study.
 </li>
 <li>
 Coordinate with QC engineers to ensure smooth processing and flow of inspection processes.
 </li>
 <li>
 Prepare inspection fixtures and gauges concepts, coordinate review and approval by manufacturing staff and develop detailed CAD drawings.
 </li>
 <li>
 Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.
 </li>
 <li>
 Manage and conduct QC personnel training for productivity improvement projects, and mentor fellow engineers and technicians.
 </li>
 <li>
 Experience developing control plans, validating test methods and gauges, and driving corrective actions / failure analysis efforts.
 </li>
 <li>
 Project management experience and a deep understanding of problem-solving tools including design of experiments, root cause analysis and statistical process control principles preferred.
 </li>
 <li>
 Ensure quality records are maintained up-to-date.
 </li>
 <li>
 Experience in hands-on manufacturing environment of mechanical enclosures, casings, plastic parts, injection molding, tooling, jigs, fixtures, or automotive high volume quality manufacturing engineering.
 </li>
 <li>
 Strong understanding of GD&amp;T Geometric Dimensioning &amp; Tolerancing.
 </li>
 <li>
 Understanding of DOE principles
 </li>
 <li>
 Promote the awareness and importance of compliance to HSE processes and ensure that all QC tasks and QC activities are performed in compliance with the established HSE policies, procedures and SOP&rsquo;s.
 
 
 </li>
 </ul>
 
 Experience &amp; Educational Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Quality/Mechanical/Industrial Engineering or related equivalent qualification.
 </li>
 <li>
 5-7 years of experience as Quality/industrial engineer in a manufacturing environment.
 </li>
 <li>
 Proven track record of driving continuous quality improvement.
 
 
 </li>
 </ul>
 
 Key Skills
 
 
 
 <ul>
 <li>
 Solidworks design software skills
 </li>
 <li>
 Gauges Design principles.
 </li>
 <li>
 Geometric dimensioning &amp; tolerancing.
 </li>
 <li>
 Statistical process control.
 </li>
 <li>
 Advanced Quality Planning &amp; PPAP.
 </li>
 <li>
 Planning, organizing and management.
 </li>
 <li>
 Advanced Excel skills.
 </li>
 <li>
 Negotiation and discretion.
 
 
 </li>
 </ul>
 #CARACAL
</div>

Metrology & Gauges Engineer

Wood

<div>
 
 Job Description
 
 
 
 
 Remarkable people, trusted by clients to design and advance the world.
 
 
 
 
 The Role
 
 
 
 This is an exciting opportunity for an experienced I&amp;C Engineer with a proven track record in designing, developing and maintaining complex instrumentation systems to ensure precision, efficiency, and safety in industrial processes for high-profile clients.
 
 
 
 Our Clients and Projects
 
 
 
 
 Designing the future. Transforming the world.
 
 
 
 Across EMEA, our teams are providing solutions and expertise to support our growing client base, focused on combining maintenance and operations with asset management, modifications and engineering services across the energy and materials markets.
 
 
 We are focused on growth and our strategy is centered around building partnerships with our clients across the three regions: UK, Norway and the Middle East and Africa.
 
 
 
 What We Can Offer
 
 
 
 <ul>
 <li>
 Meaningful and interesting projects: Delivered to high profile clients across the Energy Sector
 </li>
 <li>
 Commitment to Diversity and Inclusion: We are an organization actively committed to diversity and inclusion across our business
 </li>
 <li>
 Competitive remuneration package: With regular reviews to ensure we are rewarding at the right level in line with the market
 </li>
 <li>
 Medical Insurance: Ensures inpatient, and outpatient medical care is available should you require treatment
 </li>
 <li>
 Group Life and Personal Accident Insurance: The company provides Life Assurance cover
 </li>
 <li>
 End of Service Gratuity: In line with UAE Labor Law, all employees are eligible for an End of Service benefit
 </li>
 <li>
 The Employee Share Plan: Gives you the opportunity to purchase Wood shares and receive a match from the company
 </li>
 <li>
 Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years&rsquo; services of our employees at 5-year service milestones
 </li>
 <li>
 Commitment to continued professional development: Development plans that are tailored to your individual needs and interests
 </li>
 <li>
 Global connections: Join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
 </li>
 <li>
 Energy Transition Academy: Join a community of experts sharing your knowledge and gaining more exposure to a variety of existing and emerging energy systems &ndash; delivered by experts in their field
 
 
 </li>
 </ul>
 
 The Key Objectives For This Role Are
 
 
 
 <ul>
 <li>
 Creating and implementing advanced instrumentation systems for industrial processes.
 </li>
 <li>
 Enhancing system performance and efficiency through automation and control strategies.
 </li>
 <li>
 Ensuring all instrumentation adheres to industry standards and regulatory requirements.
 </li>
 <li>
 Diagnosing and resolving issues to maintain seamless operations.
 </li>
 <li>
 Leading instrumentation projects, coordinating with teams, and managing budgets.
 </li>
 <li>
 Researching and integrating new technologies to improve system capabilities
 
 
 </li>
 </ul>
 
 Responsibilities
 
 
 
 
 Key Accountabilities and Responsibilities:
 
 
 
 <ul>
 <li>
 The Senior Instrumentation and Control Engineer is primarily engaged in the design, modeling, and analysis of I &amp; C engineering requirements on a project, tender or proposal, as per client standards, international codes, and project scope of work.
 </li>
 <li>
 Planning and executing Instrumentation engineering design for field instrumentation, Distributed Control System (DCS), Supervisory control and Data Acquisition (SCADA), Integrated Control System (ICS), Fire and Gas, Safety Instrumented Systems (SIS) and Telecommunications systems. This entails the preparation of basic design, detailed design of the instrumentation and controls part of the project.
 </li>
 <li>
 SPI knowledge / experience is mandatory in Index, I/O List, Data sheets and Loop drawing
 </li>
 <li>
 Offshore design experience and RLE FPSO experience are mandatory.
 </li>
 <li>
 Preparing data sheets, Cause and effect diagrams, logic verifications, Input to interdepartmental interfaces
 </li>
 <li>
 Ensuring that the design is carried out as per the industry standard practices and in conformance with the quality management system.
 </li>
 <li>
 Co-ordination with Project and client
 </li>
 <li>
 Assisting in the preparation of project proposals and pre-qualification documents in what relates to Instrumentation engineering design.
 </li>
 <li>
 Identification of issues that impede project progress and reporting to Project Managers and Discipline Heads
 </li>
 <li>
 Assimilating the evolution of new products and technology, and updating oneself on the latest international standards in terms of engineering design practices and their applications
 </li>
 <li>
 Identifying new methodology of work process required for higher productivity.
 </li>
 <li>
 Preparation of Construction work packs
 </li>
 <li>
 TBE, VDR and follow-up engineering activities
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Skills And Qualifications
 
 
 
 
 What makes you remarkable?
 
 
 
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
 
 
 
 Expected
 
 
 
 <ul>
 <li>
 Engineering Degree in a relevant discipline
 </li>
 <li>
 At least 5 years of experience with instrumentation in the Oil &amp; Gas environment
 </li>
 <li>
 Offshore experience is mandatory.
 </li>
 <li>
 Experience in SPI &ndash; Specification and loop wiring module
 </li>
 <li>
 Fully coherent in all international codes and standards.
 </li>
 <li>
 Excellent command of both spoken and written English is required.
 </li>
 <li>
 Enthusiastic, conscientious and keen to learn / Flexible with a can-do attitude.
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com
 
 
 
 Diversity Statement
 
 
 
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>

I&C Engineer

HALCON

<div>
 HALCON is a regional and international leader that Offers Next-Generation Weapons Systems and Robotics Expertise to Meet the Challenges of a Rapidly Changing World.
 
 
 Halcon mission is to bring innovative technologies to revolutionise the defence industry, through offering next-generation weapons systems and robotics expertise to meet the challenges of a rapidly changing world.
 
 
 We design, manufacture, assemble and integrate components for gravity-release guided systems, missiles and loitering munitions.
 
 
 
 Role Purpose:
 
 
 
 Support supplier industrial capability development and manufacturability analysis through active participation in supplier assessments, technical capability mapping, and data-driven improvement initiatives.
 
 
 The role focuses on assisting with technical reviews and ensuring supplier alignment with design and production requirements across CNC, PCBA, and Cable &amp; Harness domains.
 
 
 
 Duties and Responsibilities:
 
 
 
 <ul>
 <li>
 Assist in technical site visits to verify supplier capabilities, machinery, process control, and operator competency.
 </li>
 <li>
 Document supplier technical processes and maintain accurate records of assessments and qualification stages.
 </li>
 <li>
 Coordinate and collect data for supplier capability matrices, technical gaps, and improvement tracking.
 </li>
 <li>
 Working according to the Product Realization Procedure and the Manufacturing Engineering Change Management Procedure.
 </li>
 <li>
 Support validation and data collection for process reliability and repeatability at supplier facilities.
 </li>
 <li>
 Develop and implement manufacturing processes to maximize efficiency and product quality.
 </li>
 <li>
 Analyse product specifications and manufacturing capabilities to improve and optimize processes. Maintain shared access to up-to-date evaluation templates, technical checklists, and status trackers.
 </li>
 <li>
 Implementing problem solving and continuous improvement.
 </li>
 <li>
 Adhering to related standards and preparing required documentations associated with the above responsibilities, insuring on-time delivery and working according to the internal standards and procedures.
 
 
 </li>
 </ul>
 
 Main Requirements:
 
 
 
 <ul>
 <li>
 3-6 years of experience in Electrical Engineering in the defence, aerospace, automotive or energy industry
 </li>
 <li>
 Diploma, Bachelor or Master degree in Industrial Engineering, Electrical Engineering, or a related field.
 
 
 </li>
 </ul>
 HALCON is a subsidiary in the Weapon and Missile cluster in EDGE GROUP.
 
 
 EDGE GROUP, headquartered in Abu Dhabi is a Semi Governmental, Defence and Space Manufacturing company consolidates 35+subsidiaries into main 5 clusters: Missiles and Weapon, Platform &amp; Systems, Space &amp; Cyber defense, Trading &amp; Mission Support and Homeland Security.
 
 
 #HALCON
</div>

Manufacturing Engineer - Electrical

VORTEXEN DYNAMICS INDUSTRIAL SOLUTIONS - SOLE PROPRIETORSHIP L.L.C.

Sales Engineer &ndash; Instrumentation &amp; Radiation Detection SystemsLocation: Abu Dhabi, United Arab Emirates Company: Vortexen Dynamics Industrial SolutionsAbout Vortexen: Vortexen Dynamics Industrial Solutions is an Abu Dhabi&ndash;based engineering company specializing in mechanical, electrical, instrumentation, and automation systems integration. We provide advanced radiation detection, nuclear measurement, and electronic instrumentation solutions to research institutes, energy companies, and industrial clients across the UAE and GCC.Position: Sales Engineer &ndash; Instrumentation &amp; Radiation DetectionDepartment: Instrumentation and Measurement Systems Location: Abu Dhabi, UAEKey Responsibilities:<ul><li>Develop and promote sales of instrumentation and radiation detection systems in the UAE and GCC markets.</li><li>Engage with universities, laboratories, nuclear facilities, and industrial clients to identify potential projects.</li><li>Conduct technical presentations, product demonstrations, and configuration discussions with clients.</li><li>Collaborate with the internal technical and procurement teams for proposals, tenders, and quotations.</li><li>Build and maintain relationships with consultants, EPCs, and government institutions.</li><li>Track market trends and competitor activities to identify new opportunities.</li><li>Provide technical feedback and client support for ongoing and completed projects.</li></ul>Requirements:<ul><li>Bachelor&rsquo;s Degree in Instrumentation, Electronics, or Electrical Engineering.</li><li>Minimum 3&ndash;5 years of experience in scientific instrumentation, radiation detection, or measurement systems.</li><li>Strong knowledge of detectors, DAQ systems, spectroscopy, and measurement principles.</li><li>Excellent communication, presentation, and proposal drafting skills.</li><li>UAE Driving License required.</li><li>Prior exposure to nuclear, R&amp;D, or energy sector clients in the UAE is an added advantage.</li></ul>Job Types: Full-time, Part-time

Sales Engineer

Resource Industries

Job Title: Civil EngineerLocation: Abu Dhabi, UAE Industry: Production Employment Type: Full-timeJob Summary:We are looking for a qualified Civil Engineer with over 3 years of experience in factory or industrial building projects. The candidate will be responsible for overseeing project execution, ensuring quality and safety compliance, and preparing design and layout drawings using AutoCAD.Key Responsibilities:<ul><li>Supervise and execute civil works related to factory construction and infrastructure projects.</li><li>Coordinate with contractors, consultants, and internal teams to ensure timely project delivery.</li><li>Prepare and review technical drawings, layouts, and as-built drawings using AutoCAD.</li><li>Monitor site progress, ensure adherence to specifications, and maintain quality standards.</li><li>Manage project documentation and assist in cost and material estimation.</li><li>Ensure compliance with HSE and local authority regulations.</li></ul>Qualifications &amp; Skills:<ul><li>Bachelor&rsquo;s degree in Civil Engineering.</li><li>Minimum 3 years of experience in factory or industrial building construction.</li><li>Proficient in AutoCAD and MS Office.</li><li>Strong knowledge of project execution, site management, and material handling.</li><li>Excellent communication and coordination skills.</li></ul>Salary:Competitive, based on experience + benefits as per UAE Labor Law.Job Type: Full-timePay: AED4,000.00 - AED5,000.00 per monthAbility to commute/relocate:<ul><li>Abu Dhabi: Reliably commute or planning to relocate before starting work (Preferred)</li></ul>Experience:<ul><li>Civil Engineering: 3 years (Required)</li></ul>

Civil Engineer

Explore 627+ Industrial engineer in Abu Dhabi this November. Find roles across top companies and apply now to boost your career.