planning engineer

electrical engineer

mechanical technician

mechanical engineer

bms engineer

mechanical project engineer

EGEC Qatar

Job Summary:Sr. Mechanical Engineer is responsible to supervise the mechanical work based on the Designs &amp; QCS code to get final authority approval &amp; to meet customer expectations. Also carry out extreme attention to detail of designs as specified by design engineer to fulfil the clients need within the specified scope and schedules.Duties &amp; Responsibilities:<ul><li>Review the design drawing and standard detail drawings, specifications, schematics diagrams, sequence operation</li><li>Technical review of Design / Shop drawings / Submittals / Calculations of all Mechanical systems, including Fire Fighting, HVAC, Plumbing, Storm water, Fuel, Irrigation system, Kitchen equipment&rsquo;s etc.</li><li>Resolve technical queries and technical problems.</li><li>Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are functioning according to standards.</li><li>Perform supervision of work conducted by contractors as per base-line schedule approved and meet client expectations.</li><li>Review shop drawing and ensure that as per design approved by authorities and coordinated with other trades.</li><li>Review material submittals as per QCS, QCDD requirements and project specification and coordinated with other trades in case interfaced.</li><li>Provide the support and cooperation in regards to the Quality, Health, Safety and Environmental department requirements and Audits.</li><li>To ensure, Implement, Maintain quality, safety and environmental systems in compliance with ISO 9001, 14001 and 45001 standards</li><li>Make recommendations and solutions to RFI, give assistance during testing and commissioning, site inspection, organize project schedules based on the target completion date and utilize strong interpersonal skills towards the contractors and clients.</li></ul>Education &amp; Experience: <ul><li>Bachelor&rsquo;s degree in mechanical engineering.</li><li>Minimum 10 years&rsquo; experience in mechanical engineering.</li><li>Must possess UPDA grade A</li><li>High proficiency is MS Office applications</li><li>Knowledge in mechanical engineering technologies and best practices.</li><li>Extensive experience with mechanical systems used in construction projects (HVAC, plumbing, fire protection, etc.)</li><li>Knowledge of relevant engineering codes, standards, and regulations</li><li>Proficient in construction project management software.</li><li>Strong understanding of mechanical engineering principles and practices.</li></ul>Job Type: Full-timeApplication Question(s):<ul><li>Are you living in one of these regions (Alkhor - Simaismah - Al shamal - Al&nbsp;Ruwais)?</li><li>Do you have a car?</li><li>Are you able to join immediately?</li><li>What is your current salary?</li><li>What is your expected salary?</li><li>Do you have UPDA Grade A?</li></ul>

Senior Mechanical Engineer

Gulf Consulting Group

Job Summary:We are seeking an accomplished Senior Mechanical Engineer (Supervision) with UPDA Grade A certification and 15 years of experience, including proven expertise in BIM (Building Information Modeling). The successful candidate will oversee mechanical works across large-scale projects, ensuring compliance with QCS, local authority regulations, and international standards, while driving coordination and integration through BIM platforms.Key Responsibilities:<ul><li>Supervise and manage all mechanical systems (HVAC, plumbing, drainage, fire protection, etc.) during design review, execution, testing, and commissioning stages.</li><li>Review and approve shop drawings, BIM models, material submittals, and as-built drawings.</li><li>Utilize BIM platforms (Revit MEP, Navisworks, etc.) to ensure clash detection, design coordination, and integration across disciplines.</li><li>Conduct regular site inspections to monitor quality, progress, and compliance with safety and standards.</li><li>Coordinate with architects, structural, and electrical teams via BIM workflows for seamless project delivery.</li><li>Lead and mentor a team of junior engineers and CAD/BIM technicians.</li><li>Validate contractors&rsquo; progress reports, variations, and claims.</li><li>Supervise testing, commissioning, and final handover of mechanical systems.</li><li>Represent the client in all technical and BIM coordination meetings with consultants, contractors, and authorities.</li></ul>Qualifications &amp; Skills:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering (Master&rsquo;s preferred).</li><li>UPDA Grade A certification (mandatory).</li><li>15 years of experience in mechanical engineering and supervision, with at least 8 years in Qatar/GCC.</li><li>Strong expertise in HVAC, plumbing, drainage, and fire protection systems.</li><li>Hands-on experience with BIM tools (Autodesk Revit MEP, Navisworks Manage, BIM 360, Dynamo).</li></ul>Note: Only candidates currently in Qatar with valid QID,* send resume CV to hr@gcg.com.qa*Job Type: Full-time

Senior Mechanical Engineer – (UPDA Grade A, BIM)

JBK controls W.L.L

Company DescriptionJBK Controls is part of the JBK Group, a leading Systems Integrator headquartered in Doha, Qatar. We have proven expertise in centrally controlled and integrated Security, Safety, Automation &amp; IT Systems for a range of projects in commercial, industrial, and Oil &amp; Gas sectors. With over 48 years of experience, JBK Controls offers timely and cost-effective solutions with manpower and technical expertise.Role Description This is a full-time on-site role for a Mechanical Engineer at JBK Controls in Doha, Qatar. The Mechanical Engineer will be responsible for tasks related to mechanical engineering, machine design, computer-aided design (CAD), project management, and research and development (R&amp;D).Qualifications include<ul><li>Mechanical Engineering and Machine Design skills</li><li>Proficiency in Computer-Aided Design (CAD)</li><li>Experience in Project Management and Research and Development (R&amp;D)</li><li>Strong problem-solving and analytical skills</li><li>Excellent communication and teamwork abilities</li><li>Bachelor's degree in mechanical engineering or related field</li><li>Experience in the industrial or Oil &amp; Gas sector is a plus</li></ul>We prefer candidates with 1 to 5 years of relevant experience with NOC available.Local hire onlyInterested candidates can share their updated CV to recruitment@jbkcontrols.comJob Types: Full-time, PermanentEducation:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>ELV: 1 year (Required)</li></ul>

Mechanical Engineer

AL FARAH CONTRACTING

Mechanical Engineer<ul><li>5 years minimum Gulf Experience</li><li>Willing to work for 3 months, extendable continues project</li><li>Willing to work in Lusail</li><li>with valid QID with NOC</li><li>who can join immediately</li></ul>Job Types: Full-time, Part-timePay: QAR1.00 - QAR2.00 per month

Qatar Museum Authority

<div><div><div>Key Accountabilities:</div><div><div>
Role Purpose: In Architectural Conservation, the MEP Engineer plays a critical and delicate role, balancing the introduction of essential modern services with the protection and preservation of historical character. the MEP Engineer contributes to sustainable reuse, regulatory compliance, and the long-term viability of heritage buildings.

Duties and Responsibilities:
<ul>
<li>Design and review mechanical (HVAC), electrical (power and lighting), and plumbing (water supply, drainage, fire protection) systems.</li>
<li>Prepare detailed engineering drawings, technical specifications, and schedules.</li>
<li>Coordinate MEP designs with architectural and structural elements of the project.</li>
<li>Perform load calculations, equipment selection, and system sizing.</li>
<li>Review and approve shop drawings, material submittals, and method statements.</li>
<li>Monitor site installation work to ensure compliance with design and safety standards.</li>
<li>Conduct system testing and commissioning of MEP installations.</li>
<li>Collaborate with contractors, consultants, and other project stakeholders.</li>
<li>Resolve technical issues and provide engineering solutions during construction.</li>
<li>Stay updated with new technologies, codes, and standards relevant to MEP systems withn heritage assets.</li></ul> 

</div></div></div><div><div>
Qualifications/Requirements:</div><div><div><ul>
<li>Strong knowledge of international building codes (NFPA, NEC, IPC, etc.)</li>
<li>Proficiency in MEP design software.</li>
<li>Excellent coordination and communication skills.</li>
<li>Ability to manage multiple projects and meet deadlines</li>
<li>Experience with [AutoCAD, Revit MEP, etc.].</li>
<li>Organisational, project management and planning skills, including the ability to juggle multiple tasks.</li>
<li>An ability to solve technical problems.</li>
<li>Bachelor's Degree in Mechanical Electrical and Planning Engineer (MEP Engineer)</li>
<li>5 years&rsquo; experience.</li></ul></div></div></div></div>

Mechanical Electrical and Planning Engineer (MEP Engineer)

MDC Engineers & Consultants WLL

Mechanical Engineer &ndash; Grade A with GSAS CertificationJob Location: Doha, QatarJob Description: We are looking for a qualified Mechanical Engineer to join our team in Qatar. The candidate must hold a Grade A classification from UPDA (MMUP) and have a valid GSAS (Global Sustainability Assessment System) Certification.Key Responsibilities:<ul><li>Review and approve sustainable design submissions in accordance with GSAS requirements.</li><li>Coordinate with consultants, contractors, and authorities for project approvals.</li><li>Supervise mechanical works related to HVAC, firefighting, plumbing, and sustainable building systems.</li><li>Ensure compliance with Qatar Civil Defense (QCDD) and sustainability standards.</li><li>Prepare technical reports and documentation for authority submissions.</li></ul>Qualifications:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering (Master&rsquo;s preferred).</li><li>UPDA / MMUP Grade A classification.</li><li>Certified in GSAS.</li><li>Minimum 7&ndash;10 years of experience in building projects.</li><li>Strong knowledge of sustainable design, building codes, and local authority procedures.</li></ul>Please send your updated CV to: careers@mdcqa.comJob Type: Full-time

Mechanical Engineer – Grade A with GSAS Certification

Lana Al Arab Contracting

Lead Mechanical Engineer (Static) (FEED/Detailed Engineering)Duration: 1 Year (Extendable) Location: Doha, Qatar Client: One of the leading Oil &amp; Gas consultants in QatarThe successful candidate will be responsible for assigned mechanical engineering work as per the project scope, reporting to the Discipline Lead Engineer and Discipline Manager.Key Responsibilities:<ul><li>Perform conceptual, FEED, and detailed engineering and design as per design basis, project specifications, and client procedures.</li><li>Be familiar with relevant design and analysis software.</li><li>Prepare and/or perform the following deliverables, as per project scope:</li></ul><ul><li>Mechanical Data Sheet</li><li>Equipment Specifications</li><li>Material Requisition for Inquiry and Purchase</li><li>Technical Bid Evaluation (TBE) and Tabulation</li><li>Vendor Document Review (VDR)</li><li>Design calculations as per applicable international standards like API 650, API 620, ASME Sec VIII div 1 and 2</li><li>Equipment GAD, Nozzle orientation drawing, detailed fabrication drawing (as applicable in scope)</li></ul><ul><li>Possess working knowledge of SHELL DEP (preferred).</li><li>Have experience in attending progress reviews, design reviews, and clarification meetings with the client.</li></ul>Qualifications &amp; Experience:<ul><li>A professional degree in Mechanical Engineering.</li><li>A minimum of 15 years of experience in oil and gas with a major contractor or consultant.</li><li>Strong background in design engineering, including performing conceptual, FEED, and detailed engineering.</li><li>QatarEnergy Refinery-related project execution experience is preferred.</li></ul>Note: We will only consider profiles with a focus on design engineering and oil &amp; gas consultancy firms' experience. Profiles related to maintenance/supervisor, or site-related, are not considered for this position.Job Types: Full-time, Contract Contract length: 12 monthsApplication Question(s):<ul><li>Do you have work experience with consultancy-based oil and gas companies?</li></ul>Experience:<ul><li>oil &amp; gas consultancy based: 10 years (Required)</li><li>FEED and Detailed Engineering: 10 years (Required)</li></ul>

Lead Mechanical Engineer (Static)

Explore 1194+ Mechanical project engineer in Doha this September. Find roles across top companies and apply now to boost your career.

1194 mechanical project engineer jobs IN Doha

Senior Mechanical Engineer

Senior Mechanical Engineer – (UPDA Grade A, BIM)

Mechanical Engineer

Mechanical Engineer

Mechanical Electrical and Planning Engineer (MEP Engineer)

Mechanical Engineer – Grade A with GSAS Certification

Lead Mechanical Engineer (Static)