senior mechanical engineer

electrical technician

mechanical engineer

technical engineer

maintenance technician

mechatronics technician

Alex Renner Motors Garage L.L.C.

<div>Job Responsibilities
<ul><li>Carrying out all maintenance and repair work on Porsche vehicles, especially air coded engine.</li></ul>
<ul><li>Optimization of diagnostic and repair processes.</li></ul>
<ul><li>Troubleshooting</li></ul>
<ul><li>Retrofitting and commissioning of accessories and attachments</li></ul>
<ul><li>Interpretation of diagnostic and vehicle analysis protocols</li></ul>
<ul><li>Creation of complex diagnoses, especially in networked systems</li></ul>
<ul><li>Independent development of alternative diagnostic methods if standard methods do not lead to the result</li></ul>
<ul><li>Compliance with time and work requirement.</li></ul>
<ul><li>Minimization of idle and set-up times</li></ul>
<ul><li>Minimum 3 years of experience in Porsche.</li></ul>

Qualifications:
<ul><li>Successfully completed training as a car mechanic or comparable training.</li></ul>
<ul><li>Independent and precise work.</li></ul>
<ul><li>Safe handling of system software.</li></ul>
<ul><li>Completed vocational training as a vehicle mechatronics technician</li></ul>
<ul><li>Good knowledge of vehicle systems as well as Porsche vehicle diagnostics and guided troubleshooting.</li></ul>
<ul><li>Ability to perform complex repairs.</li></ul></div>

Porsche Specialist

RTConsults

The Technology Development Team at RTConsults develops innovative, often disruptive technologies to gather critical data for optimizing inspections and application processes. We are seeking a creative, hands-on problem solver who collaborates well with others, embraces big challenges, and takes ownership of delivering results.PRINCIPAL DUTIES:<ul><li>Design electrical systems that deliver simple, elegant solutions, driving innovative approaches to measurement challenges in robotic and PCB systems.</li><li>Perform simulation analyses of mechanical systems to verify their compatibility with the intended deployment environment.</li><li>Develop prototypes of robotic systems for use in both laboratory and field environments.</li><li>Collect and analyze laboratory and field data to assess environmental conditions and processes, evaluate system performance, and determine the causes of successes and failures.</li><li>Providetechnical expertise and guidance to support team members in achieving their best work and delivering excellent results</li><li>Assemble, inspect, and repair printed circuit boards (PCBs) and electronic modules.</li><li>Design, test, and troubleshoot electronic circuits and printed circuit board (PCB) layouts.</li><li>Must have experience using computer-aided design (CAD) and simulation software relevant to your field.</li><li>Occasional travel may be required to attend technical conferences and assist with testing new technologies at our facilities.</li><li>Able to work diligently both independently from home and collaboratively within team settings.</li><li>Must have experience with materials and manufacturing robotics and automation, signal processing, or engineering project management</li><li>Publish findings in peer-reviewed journals and conferences, and assist in drafting patent applications.</li></ul>Our interests include: <ul><li>Robotics and autonomous systems</li><li>Sensor platforms, robotic arm translation</li><li>Field automated measurement</li><li>Application monitoring</li><li>Fiber optic/AI camera sensing.</li></ul>MINIMUM REQUIREMENTS:<ul><li>Bachelor of Science degree in Electrical or Electronic Engineering.</li><li>Must be able to understand and communicate in English clearly, accurately, and concisely at a level necessary to perform the duties of this role.</li><li>Must possess comprehensive knowledge of engineering practices, encompassing scientific and economic principles, calculation methods, design specifications, as well as relevant codes, standards, and regulations.</li><li>Must demonstrate strong work habits and a solid work ethic, while consistently adhering to company hours, policies, and professional business etiquette.</li><li>Experience in electronic design, PCB assembly, robotics systems, or automation</li><li>Programming experience: Python, C/C++, Arduino, or similar</li><li>Proficiency with software: EasyEDA, Fusion 360, KiCad, Proteus</li><li>Experience with interfaces: HDMI, I2S, UART, SPI, I2C, BLE, BT, GSM/GPRS, LTE, NB-IoT, ladder logic, machine coding</li><li>Knowledge of microcontrollers (PIC, AVR, STM32, Arduino, ESP32, etc.)</li><li>Ability to read schematics and operate test equipment (multimeter, oscilloscope)</li><li>Proven skills in problem-solving, technical troubleshooting, and project management.</li></ul>Job Type: Full-timePay: AED45,000.00 - AED65,000.00 per yearEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>Mechatronics Engineer: 5 years (Preferred)</li></ul>

Mechatronics Engineer

noon

<div>
 
 
 About noon
 
 
 
 
 
 
 We&rsquo;re building an ecosystem of digital products and services that power everyday life across the Middle East&mdash;fast, scalable, and deeply customer-centric. Our mission is to deliver to every door every day. We want to redefine what technology can do in this region, and we&rsquo;re looking for a MEP Technician who can help us move even faster.
 
 
 
 
 
 Noon&rsquo;s fastest hyper-local delivery platform, Noon Minutes, offers a localized assortment of FMCG &amp; grocery products with delivery within 15-minutes. Currently live across the UAE and Saudi Arabia, offering thousands of products to customers in record time.
 
 
 
 
 
 noon&rsquo;s mission: Every door, every day.
 
 
 
 
 
 
 
 
 
 What you'll do:
 
 
 
 
 
 
 MEP (Mechanical, Electrical, and Plumbing) Technician to support the operations and maintenance of our dark store chain. The ideal candidate will be responsible for ensuring the seamless functionality of all MEP systems, while adhering to safety and compliance standards.
 
 
 
 
 
 
 Mechanical Systems
 
 
 <ul>
 <li>
 Perform routine maintenance, troubleshooting, and repairs of HVAC systems, including air conditioning units and ventilation systems.
 </li>
 <li>
 Monitor and maintain refrigeration units to ensure optimal performance and consistent temperature control.
 </li>
 </ul>
 
 
 
 
 
 Electrical Systems
 
 
 <ul>
 <li>
 Inspect, repair, and maintain electrical systems, including lighting, power distribution panels, and wiring.
 </li>
 <li>
 Diagnose and resolve electrical issues to prevent downtime or disruptions.
 </li>
 <li>
 Perform preventive maintenance on generators and backup power systems.
 </li>
 </ul>
 
 
 
 
 
 Plumbing Systems
 
 
 <ul>
 <li>
 Inspect and maintain plumbing systems, including water supply, drainage, and sanitary systems.
 </li>
 <li>
 Repair leaks, blockages, and other plumbing-related issues promptly.
 </li>
 </ul>
 
 
 
 
 
 Preventive Maintenance
 
 
 <ul>
 <li>
 Implement and adhere to a preventive maintenance schedule for all MEP systems.
 </li>
 <li>
 Identify and address potential issues before they lead to equipment failure.
 </li>
 </ul>
 
 
 
 
 
 Compliance and Safety
 
 
 <ul>
 <li>
 Ensure all MEP systems meet local safety and compliance standards.
 </li>
 <li>
 Conduct regular safety checks on all equipment and systems.
 </li>
 <li>
 Follow company policies and procedures for safe work practices.
 </li>
 </ul>
 
 
 
 
 
 Documentation and Reporting
 
 
 <ul>
 <li>
 Maintain accurate records of maintenance activities, repairs, and system performance.
 </li>
 <li>
 Provide regular updates and reports to the Facility Manager on MEP operations and issues.
 </li>
 </ul>
 
 
 
 
 
 
 
 
 What you'll need:
 
 
 
 
 
 
 
 Educational Qualifications
 
 
 <ul>
 <li>
 Diploma or ITI certification in Mechanical, Electrical, or Plumbing Engineering.
 </li>
 <li>
 Professional certifications in HVAC or Electrical Systems are a plus.
 </li>
 <li>
 Minimum of 3-5 years of experience in MEP maintenance, preferably in retail, warehousing, or industrial environments.
 </li>
 <li>
 Hands-on experience with refrigeration systems and cold storage equipment is highly desirable.
 </li>
 <li>
 Valid UAE Driving license is must.
 </li>
 </ul>
 
 
 
 
 
 Skills and Competencies
 
 
 <ul>
 <li>
 Strong technical knowledge of MEP systems and equipment.
 </li>
 <li>
 Ability to read and interpret technical drawings and schematics.
 </li>
 <li>
 Proficient in using tools and equipment for MEP maintenance and repairs.
 </li>
 <li>
 Good problem-solving skills and attention to detail.
 </li>
 </ul>
 
 
 
 
 
 Personal Attributes
 
 
 <ul>
 <li>
 Ability to work independently and as part of a team.
 </li>
 <li>
 Strong time management and organizational skills.
 </li>
 <li>
 Willingness to work flexible hours, including weekends and emergencies
 </li>
 </ul>
 
 
 
 
 
 Who will excel?
 
 
 
 
 
 <ul>
 <li>
 We&rsquo;re looking for people with high standards, who understand that hard work matters.
 </li>
 <li>
 You need to be relentlessly resourceful and operate with a deep bias for action.
 </li>
 <li>
 We need people with the courage to be fiercely original.
 </li>
 <li>
 noon is not for everyone; readiness to adapt, pivot, and learn is essential.
 </li>
 </ul>
 
 
</div>

MEP Technician

Facilities Management Company

Job TitleMEP / FM TechnicianLocation: Dubai, UAE Salary: AED 1,800&ndash;2,400 / month (depending on experience)Job SummaryWe are seeking a skilled and reliable MEP / Facilities Management Technician to perform maintenance, repair, inspection, and preventive maintenance of mechanical, electrical and plumbing (MEP) systems across residential, commercial, or mixed-use buildings managed by our company.Key Responsibilities<ul><li>Perform routine maintenance, inspection and servicing of MEP systems: HVAC (air-conditioning, chillers, ducting, AC units), electrical systems (lighting, wiring, panels, DB boards), plumbing (pipes, leaks, water supply, drainage, fixtures) and general building services. GIF Maintenance Services+2dubaijobcenter.com+2</li><li>Handle installations, repairs or replacements of MEP equipment and components (e.g. AC compressors, pumps, motors, wiring, plumbing fixtures). justjob.co.in+2Wizbii.com+2</li><li>Carry out preventive maintenance (PM) and scheduled maintenance tasks to avoid breakdowns and ensure reliability and safety of building systems. Wizbii.com+1</li><li>Respond promptly to breakdowns or emergency maintenance calls (e.g. HVAC failure, electrical fault, plumbing leak) especially in off-hours if required. humlog.keka.com+2Indeed+2</li><li>Maintain accurate records/logs of work performed, materials used, parts replaced, time spent, and next-step recommendations. humlog.keka.com+1</li><li>Coordinate with facility management team, supervisors, or external contractors as needed; comply with safety standards, building regulations and quality control procedures. Dr Jobs+2Wizbii.com+2</li><li>Ensure proper care and maintenance of tools, equipment, and vehicles (if company-provided), maintain cleanliness and organization of worksite. humlog.keka.com+1</li></ul>Requirements / Qualifications<ul><li>Vocational diploma / ITI / technical certification in Mechanical / Electrical / HVAC / Plumbing or similar trade. justjob.co.in+2Dr Jobs+2</li><li>Proven hands-on experience (typically 1&ndash;5 years) in MEP maintenance, facility management or multi-trade technician role &mdash; experience in UAE is a plus. humlog.keka.com+2meezab.ae+2</li><li>Strong knowledge of HVAC, electrical wiring, plumbing systems; ability to diagnose, repair and maintain building MEP systems. dubaijobcenter.com+2Wizbii.com+2</li><li>Good communication skills (English), ability to read technical drawings / schematics / job-orders, and report maintenance work properly. Dr Jobs+1</li><li>Physically fit, ready to work extended hours when required, able to manage multiple maintenance tasks across properties. dubaijobcenter.com+1</li><li>UAE driving licence (if required), especially if job involves traveling between multiple sites. humlog.keka.com+1</li></ul>Preferred / Additional Skills (advantageous)<ul><li>Ability to work independently or as part of a team. dubaijobcenter.com+1</li><li>Familiarity with preventive maintenance planning, building regulations / safety standards, Dubai code compliance. Dr Jobs+1</li><li>Prior experience in facility management (FM), multi-unit properties (residential towers, offices, hotels), or mixed-use buildings.</li><li>Basic carpentry, painting, general handyman skills &mdash; helpful for general building maintenance / minor repairs.</li></ul>Working Conditions<ul><li>Full-time position. Maintenance rounds, emergency call-outs may require off-hours or weekend availability (on rotation).</li><li>Travel between multiple properties / sites may be required.</li><li>On-site maintenance tasks involving physical work (lifting, climbing, carrying tools / equipment).</li><li>Use of company-provided tools, PPE (personal protective equipment), and adherence to safety guidelines.</li></ul>Reporting &amp; Coordination<ul><li>Report to Facility / Maintenance Manager or Supervisor.</li><li>Collaborate with other technicians, contractors, vendors, and facilities administration / operations team.</li><li>Maintain maintenance logs, submit reports for work done / parts replaced / pending tasks, and update supervisors.</li></ul>Job Type: Full-timePay: AED1,800.00 - AED2,500.00 per month

MEP / FM Technicians

GBH International Group

We are looking for an experienced MEP Multi Technician to join our facilities management team. The role involves performing preventive and reactive maintenance of mechanical, electrical &amp; plumbing systems across residential, commercial, or industrial properties. The ideal candidate must be technically skilled, adaptable, and able to attend maintenance tasks independently.Key Responsibilities:<ul><li>Conduct preventive &amp; corrective maintenance of MEP systems and equipment.</li><li>Troubleshoot and repair HVAC, electrical panels, switches, breakers, control wiring, etc.</li><li>Perform routine plumbing maintenance including fixing leaks, valves, sanitary fittings, pumps and drainage issues.</li><li>Carry out servicing &amp; repair of HVAC units, FCUs, AHUs, chilled water systems, package units, etc.</li><li>Ensure safe operation of all mechanical &amp; electrical systems in compliance with FM standards.</li><li>Attend urgent breakdown calls and perform on-site rectification as needed.</li><li>Record maintenance activities, fault findings, materials used, and report to Supervisor/Engineer.</li><li>Assist with installation and testing of MEP equipment when required.</li><li>Support other technicians in multi-trade tasks to ensure smooth FM operations.</li><li>Follow safety protocols and maintain housekeeping in all work areas.</li></ul>Requirements:<ul><li>Diploma/ITI in Electrical, Mechanical or related trade.</li><li>Minimum 3&ndash;5 years&rsquo; experience in MEP/FM maintenance in UAE (preferred).</li><li>Strong troubleshooting skills in HVAC, electrical and plumbing works.</li><li>Ability to read technical drawings, wiring diagrams &amp; equipment manuals.</li><li>Knowledge of tools, equipment &amp; safety procedures.</li><li>Willing to work in shifts/on-call based on operational requirements.</li></ul>Job Types: Full-time, PermanentPay: AED3,000.00 - AED3,500.00 per month

MEP Multi Technician

An office Furniture Company

Job Title: Machine Maintenance Technician (Metal Furniture Industry)Location: Jebel Ali, DubaiJob Type: Full-timeJob Description:We are looking for a skilled and experienced Machine Maintenance Technician to join our production team. The candidate will be responsible for the installation, maintenance, troubleshooting, and repair of various production machines, including CNC machines, laser punching machines, bending machines, compressors, and powder coating equipment.The ideal candidate should have strong technical knowledge, hands-on experience in machine maintenance, and the ability to minimize downtime by ensuring smooth operation of all equipment.Key Responsibilities:&middot; Perform preventive and corrective maintenance on CNC, laser punching, and bending machines.&middot; Inspect and maintain air compressors and powder coating systems for optimal performance.&middot; Diagnose mechanical and electrical faults in machinery and repair them efficiently.&middot; Maintain proper records of maintenance schedules, service reports, and breakdowns.&middot; Coordinate with production and quality teams to ensure minimal downtime.&middot; Calibrate and align machinery components as needed.&middot; Ensure all maintenance activities comply with safety and operational standards.Required Skills &amp; Qualifications:&middot; Diploma or ITI in Mechanical / Electrical / Mechatronics Engineering.&middot; 2&ndash;3 years of experience in machine maintenance within a manufacturing environment.&middot; Hands-on experience in maintaining:CNC machines (troubleshooting &amp; alignment)Laser punching and bending machinesAir compressorsPowder coating equipment&middot; Knowledge of electrical panels and PLC systems is an advantage.&middot; Strong problem-solving, analytical, and teamwork skills.&middot; Ability to work independently under pressure.Benefits:Visa and medicalAccommodation and transportationCareer growth opportunitiesShare your CV on: info@metafurnme.com / afreen@metafurnme.comJob Type: Full-time

Machine Maintenance Technician (Metal Industry)

Danube Group

<ul><li>Installation and Maintenance: Install, repair, and maintain mechanical, electrical, and plumbing systems within the facility.</li><li>Inspections and Compliance: Conduct routine inspections and ensure compliance with safety regulations and design specifications.</li><li>Problem-Solving: Troubleshoot and repair malfunctioning systems, addressing technical issues and making critical decisions.</li><li>Collaboration: Work closely with engineers, maintenance staff, and other departments to coordinate maintenance activities.</li><li>Leadership and Mentorship: Provide guidance to junior technicians and share knowledge to foster a culture of continuous improvement.</li><li>Process Improvement: Identify opportunities for process optimization and implement best practices to enhance system reliability.</li><li>Technical Skills: Proficiency in HVAC systems, electrical systems, plumbing systems, building automation controls, and energy management systems.</li><li>These responsibilities highlight the critical role of MEP Technicians in ensuring the efficient operation and safety of facilities, contributing to the overall success of the organization.</li></ul>Job Type: Full-timePay: From AED1,600.00 per month

Explore 237+ Mechatronics technician in Dubai this December. Find roles across top companies and apply now to boost your career.

237 mechatronics technician jobs IN Dubai

Porsche Specialist

Mechatronics Engineer

MEP Technician

MEP / FM Technicians

MEP Multi Technician

Machine Maintenance Technician (Metal Industry)

MEP Technician