Qureos Mentor

Mubashir Consultants

QAQC Coating InspectorJob Description:Responsibilities of a QAQC Coating Inspector@ PDOPerform visual inspections of coated surfaces to assess the quality of the coating application.Use appropriate inspection tools and instruments, such as wet film thickness gauges, dry film thickness gauges, adhesion testers, and holiday detectors, to measure and evaluate coating thickness and adhesion.Inspect and ensure proper surface preparation, including cleaning, abrasive blasting, and removal of contaminants, to meet project specifications and coating manufacturer&rsquo;s recommendations.Monitor coating application methods, such as spray, brush, or roller, to ensure they comply with approved coating procedures and specifications.Verify that environmental conditions (temperature, humidity, etc.) are within the acceptable range for coating application.Verify the quality and suitability of coating materials, including paints, primers, coatings, and surface preparation materials.Check material certificates and ensure proper storage and handling to prevent contamination.Maintain comprehensive records of coating inspections, including inspection reports, coating thickness measurements, adhesion test results, and photographic documentation.Create a detailed coating inspection report that summarizes findings and indicates compliance or non-conformance with project requirements.Ensure that coating processes adhere to industry standards and specifications, such as SSPC (The Society for Protective Coatings), NACE (National Association of Corrosion Engineers), and project-specific coating requirements.Identify and document coating defects, holidays, or areas of non-compliance and recommend corrective actions.Monitor and verify the effectiveness of repair work and re-inspect the coated areas.Perform various coating tests, including salt spray testing, humidity testing, and adhesion testing, as required by the project specifications.Interpret test results and make recommendations based on the findings.Maintain clear and effective communication with site managers, coating applicators, and relevant stakeholders to address quality concerns and ensure compliance.Identify areas for process improvement and suggest methods to enhance the overall quality and durability of coatings.Requirements:Send your updated CV, COE, diploma,passport copy and latest payslipSend me your CV : Oman *9*4*8*3*9*7*7*4*Email: mubashirmanpoweroman@gmail. comJob Type: Full-timePay: RO250.000 per month

welding and coating inspection (PDO)

Duties and Responsibilities:Fabrication Tasks:Read and interpret technical drawings and blueprints for kitchen equipment designs. Assemble and fit metal components accurately, ensuring quality craftsmanship.Welding Expertise:Perform TIG welding to assemble kitchen equipment components. Weld joints securely, ensuring durability and precision. Inspect and test welds to meet industry and company quality standards. Maintain welding and fabrication tools, ensuring peak performance.Quality Control:Conduct inspections of fabricated and welded products for defects or inconsistencies. Ensure finished products meet company and client specifications.Requirements:Proven experience as a Fabricator Cum Tig Welder, preferably in a manufacturing or kitchen equipment industry. Proficiency in TIG welding and ability to read and interpret technical drawings and blueprints. Familiarity with stainless steel fabrication is a must. Strong attention to detail and commitment to quality. A team player with excellent communication skills.Qualifications Experience in metal fabrication and welding<ul><li>Proficiency in reading and interpreting blueprints and technical drawings</li><li>Skilled in operating fabrication machinery and tools such as welders, cutters, and grinders</li><li>Strong attention to detail and quality control</li><li>Ability to work independently as well as in a team</li><li>Excellent problem-solving and troubleshooting skills</li><li>Knowledge of safety standards and practices in a fabrication environment</li><li>Relevant certifications or technical training in metal fabrication or a related field</li><li>Previous experience in an industrial or manufacturing setting is a plus</li></ul>*What We Offer:Competitive salary and benefits package. A supportive and innovative work environment. Opportunities for professional growth and development.Job Type: Full-timePay: RO150.000 per month

weider cum steel fabrication

CISRS and CITB certifiedUnified HSE Passport Courses (OPAL). OPAL &ndash; Unified HSE Passport Courses: HSEI (Induction); H2SI (Awareness Escape); H2SR (Refresher/Renew).Key ResponsibilitiesScaffolders are primarily responsible for assembling and disassembling temporary metal scaffolds, platforms, and staging that allow other construction personnel to work safely at heights. The responsibilities include, but are not limited to, the following:Assessing the type of scaffold necessary and planning the layout according to the project specifications.Checking the site conditions and preparing the foundation needed for scaffolding installation.Erecting scaffolding poles and attaching horizontal tubes to them.Fixing the scaffolding to buildings or structures and making sure it is stable.Ensuring that scaffolding platforms are solid, safe, and well-guarded.Dismantling scaffolding upon the completion of construction activities.Adhering to safety guidelines and standards to prevent accidents or injuries.Conducting regular checks and maintenance of scaffolding equipment.Tasks and DutiesThe everyday tasks of a Scaffolder are varied and involve both manual labor and keen attention to safety details:Transporting scaffolding materials to and from the worksite.Inspecting materials for damage or defects before erection.Using lifting equipment to hoist scaffolding materials to the desired height.Securing scaffolding to permanent structures using ties and braces.Installing guard rails and safety netting.Collaborating with other construction team members to facilitate other phases of the construction process.Complying with legal, environmental, and health and safety requirements.Food and Accommodations and Transport by company.salary will discourse in interviewCertification Requirements : CISRS and CITB certifiedUnified HSE Passport Courses (OPAL). OPAL &ndash; Unified HSE Passport Courses: HSEI (Induction); H2SI (Awareness Escape); H2SR (Refresher/Renew).Job Type: Full-timePay: Up to RO130.000 per monthExperience:<ul><li>two: 1 year (Preferred)</li></ul>

Urgent required Scaffolding for PDO

QC WELDING INSPECTORJob Description:E. Responsible for conducting qualification tests of welder personnel and issuing JCCEl. Conducting site surveillance Inspection with QCI/client during non-conformities observed and taking steps to address the issue.[]. Witness inspection of Pre-heat, PWHT, PMI, NDT, Hardness test and Review records.E. Witnessing Fit-up, dimensional verification and installation inspection as per the revised IFC Drawing.2. Pre-welding inspection, joint fit-up, in-process and post-welding visual inspection for each weld joint at the fabrication shopand field.E. Certification as a welding inspector or equivalent experience.El. In-depth knowledge of welding techniques and proceduresF. Strong attention to detail and ability to identify welding defects.Fl. Excellent communication and reporting skills.Qualifications:1.High school diploma with six (6) or more years of direct work experience, in the specificengineering discipline(s), performing QC inspection and testing of industrial project materials,equipment, systems and facilities under construction and Pre-Commissioning.2. Three (3) or more years of direct work experience performing QC inspection and testing relatedto the scope of WORK (e.g., industrial oil and gas production or petrochemical projects).3. Direct work experience and demonstrated thorough knowledge of engineering codes andstandards with welding and testing requirements required for the WORK,Requirements:Send your updated CV, COE, diploma,passport copy and latest payslipSend me your CV : Oman *9*4*8*3*9*7*7*4*Email: mubashirmanpoweroman@gmail. comJob Type: Full-timePay: RO250.000 per month

QC WELDING INSPECTOR (PDO)

Roles &amp; ResponsibilitiesOversees all Plumbing Projects -High rise building in Oman -Lead a team of Plumbers , installations , repair, maintenance- projects, site execution---construction, bath room, drinking, pipe line, various projects -safety regulation,,- Design &amp; oversee the installation, repair and maintenance of plumbing systems in various projects - Ensuring the plumbing systems meet all safety and health standards - Collaborating with architects, contractors, and other engineers on projectsRequired Candidate profile- Candidate should be well experienced in the similar role , handled various types of construction projects - Having GCC experience is desirablePerks and benefitsFamily Status &amp; Visas, Medical , Annual TicketsRequired Candidate profileITI /with 15-20 years exp in plumbing works/projects/site / high rise building construction/ min 2 -3 years exp in OMAN / Validpassport /Company Industry<ul><li>Engineering Design &amp; Consulting</li></ul>Department / Functional Area<ul><li>Installation</li><li>Maintenance</li><li>Operations</li><li>Repair</li></ul>Job Type: Full-timePay: RO140.000 per month

Plumber cum electrician

Hiring a qualified Generator 135 kva 16 kva Technician for your company is crucial in order to maintain the smooth operation of your power generators in OmanJob location: Muscat, Oman<ul><li>Perform regular maintenance on generators and related systems</li><li>Troubleshoot and repair generator issues</li><li>Install, test and commission new generators and related equipment</li><li>Ensure compliance with applicable electrical codes and regulations</li><li>Maintain accurate records of work performed and inventory levels</li><li>Work collaboratively with team members and other departments as needed</li><li>Participate in on-call rotations and be available for emergency repairs</li><li>Monitor the performance of the generators and recommend improvements and upgrades</li><li>Train and mentor junior technicians</li></ul>Required Skills and Qualifications:<ul><li>High school diploma or equivalent</li><li>Completion of a technical program in electrical or mechanical engineering or equivalent work experience</li><li>Experience working on diesel or gas-powered generators</li><li>Strong electrical and mechanical skills with the ability to read and interpret technical drawings and schematics</li><li>Familiarity with electrical codes and regulations</li><li>Knowledge of safety standards and procedures</li><li>Ability to work independently and in a team environment</li><li>Excellent communication and customer service skills</li></ul>Age: 20 &ndash; 40Job Responsibilities:Food and Accommodations and Transport by company.salary will discourse in interviewWe will Provide employed Visa, Accommodations and TransportJob Type: Full-timePay: From RO250.000 per monthExperience:<ul><li>five: 1 year (Preferred)</li></ul>

Caterpillar Generator 135 kva 16 kva Technician

Join Mubashir Consultants and explore 6   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.