principal civil engineer (lead design engineer i ‐ civil / structural)

electronics engineer / pcb design engineer needed for gerber file development

principal civil engineer (lead design engineer i ‐ civil / structural) Jobs in Farwaniya

av technician

civil engineer

electronics engineer / pcb design engineer needed for gerber file development Jobs in Farwaniya

engineer - field testing Jobs in Farwaniya

engineer - field testing

electrical engineer

OSC Edge

<div>
 
 The Power Generation &amp; Infrastructure Engineer (PG&amp;I) will be a skilled, efficient, and licensed Electrical/HVAC contractor. The engineer will be detail oriented with practical experience in HVAC systems and sub-systems. The engineer will be adept and performing adjustments and calibrations on electronic and electrical control systems. Experience troubleshooting and resolving electrical equipment problems is a must. Must have experience, with the knowledge and skills, to maintain and repair commercial and tactical generators and subsystems, to include mechanical, electrical, hydraulic, and pneumatic operating systems.
 
 
 
 
 
 This role requires on-site 5 days a week in Kuwait.
 
 
 
 
 
 
 Responsibilities:
 
 
 <ul>
 <li>
 Develop and design power generation facilities (e.g., gas engines, solar arrays, fuel cells) and electrical distribution infrastructure.
 </li>
 <li>
 Manage engineering activities from conceptual design through to construction, testing, and final commissioning.
 </li>
 <li>
 Collaborate with utility providers to negotiate grid interconnections and ensure compliance with local and military regulations and requirements.
 </li>
 <li>
 Create predictive maintenance programs and troubleshoot plant or infrastructure failures to minimize downtime.
 </li>
 <li>
 Conduct load forecasting, thermodynamic analysis, and energy modeling to maximize efficiency and control operational costs.
 </li>
 <li>
 Ensure all infrastructure designs meet strict industry, environmental, and governmental regulatory standards.
 </li>
 <li>
 Resolve complex energy and controls management issues, using diagnostic tools and measurements.
 </li>
 <li>
 Operating, controlling, and monitoring energy management systems, air handling units, pumps, compressed air systems and vacuum systems using information technology-based facilities. M
 </li>
 <li>
 Adhering to code specification for equipment tests and repair while deciphering schematic diagrams and blueprints.
 </li>
 <li>
 Operate and repair large tonnage equipment, Generators, and chill water systems.
 </li>
 </ul>
 
 
 
 
 
 Requirements:
 
 
 <ul>
 <li>
 10+ years&rsquo; experience with electrical and HVAC systems
 </li>
 <li>
 Must have Top Secret personnel clearance and must be eligible for a TS/SCI.
 </li>
 <li>
 Install, repair, and maintain generators (3kw to 100kw 50,60 and 400HZ)
 </li>
 <li>
 Maintenance and repair of mobile and fixed communications ECUs.
 </li>
 <li>
 Installation and service of HVAC/Electrical commercial, industrial and residential heating and air-condition systems, energy management and controls wiring, light commercial and residential wiring, high and low voltage, upgrading services single and 3-phase.
 </li>
 <li>
 Hands on troubleshooting and repair of commercial and industrial HVAC systems.
 </li>
 <li>
 Capable of performing ad-hoc requests for complicated QA or Design services with some explanation and oversight.
 </li>
 <li>
 Pneumatic Controls experience
 </li>
 <li>
 Digital Air Volume experience, preferred.
 </li>
 </ul>
 
 
 
 
 
 Preferred:
 
 
 <ul>
 <li>
 State Contractors License
 </li>
 <li>
 HVAC State Contractors License - Electrical
 </li>
 <li>
 ServSafe Certification
 </li>
 <li>
 National HVAC Certification by NCCER
 </li>
 <li>
 Refrigerant Transition and Recovery Certification
 </li>
 <li>
 National Electrical Code Certification
 </li>
 <li>
 Master Electricians Certification
 </li>
 </ul>
 
 
 
 
 #LI-DNI
 
</div>

Power Generation and Infrastructure Engineer

GE Vernova

<div><div><div>Component design and development Engineering organization team from GE gas power Engineering division, India is seeking a field Test Engineer to support all the regional customer field tests based at GE Kuwait Technology Center. The primary responsibility of this role is to support field testing in ME region GE Vernova customer base to cover instrumentation scope and test data collection. Also conducting material analysis as per the lab test processes and protocols and generating reports.
 
 
Our regional team supports the operation and maintenance of Gas Turbines, Steam Turbines, Generators as well as their Controls, and Accessory systems. The Power Services Engineering team members are focal points for problem resolution for our customers.
<h1 class="jobSectionHeader">Job Description</h1>
Key Responsibilities
<ul><li>Responsible for execution of regional field tests and laboratory test support.</li>
<li>Responsible for executing field test at customer site by placing instrumentation, cable routing, data acquisition equipment interfacing, software operation and preparing traceable documentation to collect quality test data as per procedures.</li>
<li>Be a point of contact for the test procedure development of field samples, as per the regional/business needs and update processes as per international procedures.</li>
<li>Responsible for design and construction of lab test facilities, test rigs, instrumentation systems and operation of relevant test software.</li>
<li>Upgrade knowledge as needed time to time and come up with ideas of simplification</li>
<li>Perform periodic Calibrations and maintain the test equipment as per ISO procedures</li>
<li>Report the test results and daily site activities promptly to associated stakeholders</li>
<li>Work safely by adhering to all safety EHS guidelines and help in audits, maintain logs and close the open issues.</li>
</ul>Required Qualifications:
<ul><li>Bachelors in engineering degree specifically Mechanical, Chemical, Electrical, Manufacturing, Material, Instrumentation or/and Aero space engineering or relevant field.</li>
<li>Minimum 2 years of experience in field or/ and lab testing, handling instrumentation or / and testing procedures.</li>
<li>Ability and willingness to travel up to 50% of the time to customer sites in GCC &amp; globally.</li>
<li>Good presentation and communication skills in Arabic &amp; English</li>
<li>Experience on MS office</li>
</ul>Desired Characteristics
<ul><li>Master's degree in mechanical /Instrumentation engineering.</li>
<li>Experience in handling laboratory analytical and data acquisition equipment</li>
<li>Awareness or/ and use of AI tools.</li>
<li>Eagerness to learn new technology, software tools &amp; other relevant domains</li>
<li>Awareness of different type of sensors, working principles, usage scenarios.</li>
<li>Knowledge and/or experience in chemical safety and SDS procedures for different chemicals/processes. Handling of inert gases and safety procedures for regulated operations.</li>
<li>Knowledge of lab quality certification and documentation</li>
<li>Working knowledge of test software such as Labview or any coding language such as C/C++ or python.</li>
<li>Knowledge of 5S &amp; active AI engagement is a strong asset.</li>
<li>Strong oral and written communication skills. Ability to document, plan, market, and execute programs.</li>
</ul><h1 class="jobSectionHeader">Additional Information</h1>
<div><div><div><div><div><div><div>Relocation Assistance Provided: Yes</div></div></div></div></div></div></div></div></div></div>

Engineer - Field Testing

AL MUTAWA & SAHNI Co.

We are looking for an experienced Electronics Engineer / PCB Design Engineer to help us design and prepare Gerber files for PCB development.The ideal candidate should have strong experience in designing printed circuit boards, creating schematics, selecting electronic components, and preparing complete manufacturing-ready PCB files. This role is suitable for someone who can take a concept or prototype and turn it into a professional PCB design ready for fabrication.ResponsibilitiesThe selected engineer will be responsible for:<ul><li>Designing PCB layouts based on our project requirements</li><li>Creating circuit schematics</li><li>Preparing complete Gerber files for PCB manufacturing</li><li>Reviewing and improving existing electronic designs</li><li>Advising on component selection</li><li>Ensuring the PCB design is compact, reliable, and production-ready</li><li>Coordinating with PCB manufacturers if needed</li><li>Providing BOM, schematic files, Gerber files, and assembly files</li></ul>Required SkillsThe candidate should have experience with:<ul><li>PCB design and development</li><li>Gerber file generation</li><li>Circuit schematic design</li><li>KiCad, Altium Designer, Eagle, EasyEDA, or similar software</li><li>Component selection and BOM preparation</li><li>Microcontrollers, sensors, LEDs, motors, batteries, and charging circuits</li><li>Low-power electronics design</li><li>Testing and troubleshooting PCB designs</li></ul>Preferred ExperienceExperience with wearable devices, Arduino-based circuits, Bluetooth-enabled devices, battery-powered products, or sensor-based electronics will be a strong advantage.Project GoalWe are developing a compact electronic product and need a qualified engineer who can help convert the current design into proper PCB files for manufacturing.RequirementsApplicants should be able to provide:<ul><li>Previous PCB design samples or portfolio</li><li>Examples of Gerber files created for past projects</li><li>Estimated timeline for completing the design</li><li>Clear communication during the project</li><li>Ability to make revisions after review</li></ul>Work Location: In person

Electronics Engineer / PCB Design Engineer Needed for Gerber File Development

Hitachi Energy

<div>
 
 The opportunity
 
 
 
 Join a team that specializes in providing remote and on-site services for protection systems in transmission and distribution substations, ensuring solutions that are timely, cost-effective, and aligned with customer expectations. Our work adheres to industry-standard processes, safety protocols, and best practices&mdash;delivering reliability and excellence every step of the way.
 
 
 
 How You&rsquo;ll Make An Impact
 
 
 
 <ul>
 <li>
 Driving service sales and business development activities across assigned countries and market segments (e.g., Utilities, Power Generation, Oil &amp; Gas, EPCs, Industrial clients).
 </li>
 <li>
 Performing relay testing, commissioning, maintenance, and troubleshooting at client substations. Possess knowledge of structured programming, communication techniques, and protocols for Hitachi Energy relays and familiarity with other relays manufacturers is preferable.
 </li>
 <li>
 Troubleshooting system protection problems and schemes effectively and understanding different protection and communication schemes and supervising the installation and commissioning of automation systems, ensuring full compliance with standards and best practices.
 </li>
 <li>
 Demonstrate expertise in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in substations up to 400 kV voltage level.
 </li>
 <li>
 Experience in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in power stations and refinery environments.
 </li>
 <li>
 Training site operators in the use of works and ensure site-specific manuals and documentation are available before handover and are highly familiar with interlocking schemes and gas tripping schemes across all voltage levels from 380 V to 400 kV.
 </li>
 <li>
 Consult with clients or their representatives to determine their needs and priorities.
 </li>
 <li>
 Provide written procedures for switching, energization, isolation methods for testing, commissioning, and maintenance work.
 </li>
 <li>
 Coordinate and oversee substation technicians and electricians, and serve as project manager, serve as the primary customer contact for specific projects, maintain a professional presentation when dealing with employees, clients, and suppliers and be well-versed in technical and safety precautions when working in live substations.
 </li>
 <li>
 Possess leadership skills and the ability to lead, supervise, and assign work to the protection team and unnecessary outages while working in Brownfield substations or on any type of energized equipment and experience in troubleshooting electrical parts for various types of switchgear.
 </li>
 <li>
 You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.
 </li>
 <li>
 Living Hitachi Energy&rsquo;s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.
 
 
 </li>
 </ul>
 
 Your background
 
 
 
 <ul>
 <li>
 A bachelor&rsquo;s degree in electrical engineering is preferred.
 </li>
 <li>
 Minimum 7 years of relevant experience is required.
 </li>
 <li>
 Strong communication and interpersonal skills.
 </li>
 <li>
 Ability to work independently and as part of a team.
 </li>
 <li>
 Proficient in using testing and diagnostic equipment.
 </li>
 <li>
 Ability to interpret and work from electrical drawings and schematics.
 </li>
 <li>
 Strong organizational and time management skills.
 </li>
 <li>
 Commitment to continuous improvement and learning.
 </li>
 <li>
 Proficiency in both spoken &amp; written English language is required.
 
 
 </li>
 </ul>
 Publication date : 2026-04-28
</div>

Field Service Engineer - Protection Systems

Worley

<div>
 
 Building on our past. Ready for the future
 
 
 
 Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 
 
 
 Primary Objective
 
 
 
 To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the WorleyParsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.
 
 
 
 Specific Accountabilities
 
 
 
 <ul>
 <li>
 Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment.
 </li>
 <li>
 Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan.
 </li>
 <li>
 Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations.
 </li>
 <li>
 Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements.
 </li>
 <li>
 Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action.
 </li>
 <li>
 Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect.
 </li>
 <li>
 Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of WorleyParsons.
 </li>
 <li>
 Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.
 </li>
 <li>
 Other key activities shall include but not be limited to the following:
 </li>
 <li>
 Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices.
 </li>
 <li>
 Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings.
 </li>
 <li>
 Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained.
 </li>
 <li>
 Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers.
 </li>
 <li>
 Maintain a HS&amp;E audit and assessment program for the location.
 </li>
 <li>
 Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports.
 </li>
 <li>
 Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.
 </li>
 <li>
 Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly.
 </li>
 <li>
 Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives.
 </li>
 <li>
 Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors
 </li>
 <li>
 Monitor the availability and use of safety apparel and equipment.
 </li>
 <li>
 Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,
 </li>
 <li>
 Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls
 </li>
 <li>
 Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, WorleyParsons, EPC contractors and their subcontractors.
 
 
 </li>
 </ul>
 
 Qualification
 
 
 
 <ul>
 <li>
 Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire &amp; Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.)
 </li>
 <li>
 Minimum years total post-graduation experience.
 </li>
 <li>
 Minimum years Oil &amp; Gas post-graduation experience.
 </li>
 <li>
 Minimum years' experience in a Safety /HSE Engineer.
 </li>
 <li>
 Practical experience with HSE management systems, reporting and audit procedures.
 </li>
 <li>
 Ability to develop, update and maintain in &ndash; house procedures.
 </li>
 <li>
 Must be conversant with local &amp; international safety standards and norms.
 </li>
 <li>
 Practical experience of design, construction, commissioning and maintenance aspects of oil &amp; gas installations.
 
 
 </li>
 </ul>
 
 Moving forward together
 
 
 
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 
 
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 
 
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 
 
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
 
 
</div>

Safety Engineer (HSE Specialist II)

Amentum

<div>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.
Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers&rsquo; manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.
Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.
Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.
Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.
USAF equivalent position is Aircraft Mechanic Apprentice.
Essential Responsibilities:<ul>
<li>
Performs all daily launch/recovery duties in support of operational requirements.
</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li>
<li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li>
<li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li>
<li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li>
<li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li>
<li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li>
<li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li>
<li>Must be able to work with little-to-no supervision.</li>
<li>Performs all other duties as assigned as requested.
</li>
</ul>Minimum Requirements<ul>
<li>
Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li>
<li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li>
<li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li>
<li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li>
<li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li>
<li>Must be able to inspect and operate ground support and auxiliary equipment.</li>
<li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li>
<li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li>
<li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li>
<li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li>
<li>Must be able to speak, read, write, and understand English.</li>
<li>Must submit updated SF-86 within 30 days of hire start date.</li>
<li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li>
<li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li>
<li>Must have current/active State Issued Driver&rsquo;s License.</li>
<li>Must be able to acquire and maintain a valid flight-line Government Driver&rsquo;s License.</li>
<li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li>
<li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li>
</ul>
Preferred Qualifications<ul>
<li>
Associate degree in a relevant career field.</li>
<li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li>
<li>RPA Deployment Experience.</li>
<li>Prior Experience as a Defense Contractor.</li>
<li>Aircraft Mechanic Experience within the last 10 years.</li>
<li>MQ-9 Experience as an Aircraft Mechanic.</li>
<li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul></div>

RPA Mx Aircraft Mechanic I/Deployment Pool (K)

American University of the Middle East (AUM)

<div>
 
 
 About the Organization
 
 
 
 
 
 
 The American University of the Middle East (AUM) is a leading higher education institution established in 2005 in Kuwait, distinguished by its innovative curricula, integrated and environmentally friendly campus, and a culture that fosters diversity and innovation.
 
 
 
 
 
 AUM obtained global accreditation having completed the International Quality Review (IQR) by the Quality Assurance Agency for Higher Education (QAA), UK. It has also achieved international accreditations for its academic programs.
 
 
 
 
 AUM is ranked #1 University in Kuwait as per the 2026 World University Rankings by QS and THE, making it to #563 in QS World. In the QS Arab Region Rankings 2026, AUM is also ranked #1 in Kuwait and among the top 20 universities in the Arab world. In THE Arab University Rankings 2026, AUM is ranked #26 in the Arab world.
 
 
 
 
 
 The College of Engineering and Technology (CoET) at AUM is dedicated to maintaining high quality academic programs by adopting a learner centered approach. CoET aspires to prepare students for life-long learning and careers in engineering for engineering students, and in technology for technology students; with emphasis on leadership skills and creative work so they can lead cultural, social, and economic development.
 
 
 
 
 
 The College of Engineering and Technology (CoET) at AUM is currently recruiting full-time faculty members with Master&rsquo;s or PHD in the following majors:
 
 
 
 
 <ul>
 <li>
 Civil Engineering
 </li>
 <li>
 Industrial Engineering
 </li>
 <li>
 Computer Engineering
 </li>
 <li>
 Electrical Engineering
 </li>
 <li>
 Mechanical Engineering
 </li>
 <li>
 Chemical Engineering
 </li>
 <li>
 Information Systems &amp; Technology
 </li>
 <li>
 Architectural Engineering
 </li>
 </ul>
 
 
 
 
 
 Job Requirements
 
 
 
 
 
 <ul>
 <li>
 A Master&rsquo;s or PHD from an internationally accredited university.
 </li>
 <li>
 Have a solid commitment to teaching excellence and student advising at undergraduate level.
 </li>
 <li>
 Prepare teaching materials, maintain and improve competence in subjects being taught.
 </li>
 <li>
 Ability to work in a diverse, interdisciplinary, and fast-paced environment is essential.
 </li>
 <li>
 Have demonstrable skills in oral and written English.
 </li>
 <li>
 Industry experience is a plus for this position.
 </li>
 </ul>
 
 
</div>

Faculty Positions- College of Engineering and Technology

Explore 16+ Electrical engineer in Farwaniya this June. Find roles across top companies and apply now to boost your career.