planning engineer Jobs in Tagalog Jobs In Abu Dhabi

planning engineer

qa/qc engineer Jobs in Tagalog Jobs In Abu Dhabi

qa/qc engineer

civil engineer Jobs in Tagalog Jobs In Abu Dhabi

civil engineer

estimation engineer Jobs in Tagalog Jobs In Abu Dhabi

estimation engineer

electrical design engineer Jobs in Tagalog Jobs In Abu Dhabi

electrical design engineer

engineer risk based inspection

Wood

<div><p>The <b>Engineer </b>will contribute to the delivery of Asset Health consultancy services to the internal Wood business units and to Wood&rsquo;s external client base. This role is primarily based in Wood offices but may also require on-site support, both onshore and offshore.
</p><p>Roles in this team are crucial for ensuring the safety, reliability, and efficiency of engineering projects and will typically support one or more of the following specialist areas. While prior experience in any of these areas is advantageous, it is not a mandatory requirement.
</p><p><b>Risk Based Inspection (RBI):
</b></p><div><ul><li>Developing and implementing Risk-Based Inspection (RBI) studies and strategies for pipelines and process facilities, including Non-Destructive Testing (NDT) and written schemes of inspection.
</li></ul><ul><li>RBI Software: Specifying, implementing, and supporting RBI software configuration and implementation.
</li></ul></div><p><b>The key high-level aspects of the role are as follows:
</b></p><ul><li>A competent team member with typically two to four years of progressively more responsible pertinent experience.
</li><li>Contributes to the successful completion of RBI/integrity engineering workscopes and consultancy services as directed by immediate supervisor.
</li><li>Assists in the development of RBI/integrity engineering deliverables.
</li><li>Performs routine aspects of RBI/integrity engineering assignments and collaborates with experienced technical professionals for non-routine aspects.
</li><li>Solves problems of a routine nature within clearly defined procedures.</li></ul></div>
<br><div><p><b>Executes assigned scope of work.
</b></p><ul><li>Produces RBI/integrity engineering deliverables such as philosophies, reports, specifications, data sheets and others.
</li><li>Originates RBI study reports, equipment inspection scheme, piping on-stream inspection drawings.
</li><li>Performs a variety of conventional engineering tasks in line with RBI/integrity discipline practices, procedures and programs.
</li><li>Solves problems using a variety of standard methods, applying standard techniques involving only minor innovations of methodology to provide solutions to problems with a limited number of variables.
</li><li>Participates with drafters, technicians, and others to contribute to project completion.
</li><li>Coordinates work with other engineers and operating groups.
</li><li>Researches problems through various sources of technical information.
</li><li>Makes recommendations on the acceptability of integrity supplied and work completed by contractors.
</li><li>Responsible for studies of limited scope requiring application of prescribed methods.
</li><li>Problems involves existing technology and applications, but may involve non-recurring problems.
</li><li>Demonstrates judgement in determining the methods to apply to assigned tasks.
</li><li>Makes limited changes to meet location conditions, new situations or to improve safety, economy, efficiency or applicability.
</li><li>Note-taking and active participation in design reviews.
</li><li>Review vendor documents under supervision and guidance
</li></ul><p><b>Business and Industry Experience:
</b></p><ul><li>Typically requires two to four years of progressively more responsible pertinent experience.
</li><li>Able to communicate clearly verbally and in written form.
</li><li>Enthusiastic, conscientious and keen to learn.
</li><li>High level of awareness and commitment to safety in all aspects of daily work.
</li><li>Strong organizational skills and attention to detail
</li><li>Highly motivated and demonstrates personal initiative.
</li><li>Possesses integrity, strong work ethic, positive attitude, and is dependable.
</li><li>Adaptable and flexible to the changing needs of projects.
</li><li>Team player that works well with supervisors, subordinates, peers and clients.
</li><li>Ability to comprehend and interpret technical information applicable to the integrity engineering discipline.
</li><li>Able to apply academic theory in a practical context.
</li><li>Awareness of standards, processes and procedures and how they are used in work execution, particularly related to major energy companies in Abu Dhabi, UAE
</li><li>Developing level of knowledge of regulatory framework and associated legislation.
</li><li>Developing level of knowledge of industry and technology development within discipline area.
</li><li>Some understanding of internal economic factors affecting projects to which assigned.
</li><li>Some knowledge of competitor capabilities.
</li><li>Solid understanding of policies and procedures that apply to assignments.
</li><li>Good level of general computer literacy and familiarity with relevant specialist engineering software</li></ul></div><p></p>
<br><div><ul><li>ISCED Level 6 Bachelors (minimum) or Level 7 Masters (preferred) Degree in engineering discipline, alternatively, tertiary level education combined with suitable industry experience can be used to demonstrate equivalence.
</li><li>A degree in Mechanical, Materials, or Chemical Engineering is preferred; however, candidates with relevant experience or a strong interest in the field are also encouraged to apply.
</li><li>Working towards Chartership or relevant professional engineer status accredited by a national or industry engineering institution.
</li><li>Demonstratable initial CPD record showing examples of technical and consulting development.</li></ul></div>
<br><div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com<br>
</div><div></div><br>
<div><b>Diversity Statement
</b></div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Engineer – Risk Based Inspection

Wood PLC

<div><p>Wood's Digital Consulting business is currently searching for Engineer- Corrosion &amp; Materials in Abu Dhabi, UAE.
</p><p>The <b>Engineer &ndash; Corrosion &amp; Materials </b>will contribute to the delivery of corrosion and materials engineering consultancy services to internal Wood business units and external clients.
</p><p>This role is primarily office-based but may require on-site support. Responsibilities include supporting corrosion management strategies, material selection, coatings, and related integrity assessments to ensure safe, reliable, and efficient operation of client assets.
</p><p><b>Personal attributes:
</b></p><ul><li>Able to communicate clearly verbally and in written form.
</li><li>Enthusiastic, conscientious and keen to learn.
</li><li>High level of awareness and commitment to safety in all aspects of daily work.
</li><li>Strong organizational skills and attention to detail.
</li><li>Highly motivated and demonstrates personal initiative.
</li><li>Possesses integrity, strong work ethic, positive attitude, and is dependable.
</li><li>Adaptable and flexible to the changing needs of projects.
</li><li>Team player that works well with supervisors, subordinates, peers and clients.</li></ul></div>
<br><div><p><b>Executes assigned scope of work:
</b></p><ul><li>Produce corrosion and materials engineering deliverables such as reports, specifications, and data sheets.
</li><li>Support development and implementation of corrosion management strategies.
</li><li>Conduct material selection assessments and corrosion risk evaluations.
</li><li>Assist in coating design and specification for onshore and offshore facilities.
</li><li>Review vendor documents and participate in design reviews.
</li><li>Collaborate with other disciplines and client teams to ensure technical quality and compliance with standards.
</li><li>Contribute to proposals and technical input for corrosion-related scopes</li></ul></div>
<br><div><p><b>Knowledge, Skills and Experience:
</b></p><ul><li>Experience (&gt;2 years) in corrosion and materials engineering within oil &amp; gas or related industries.
</li><li>Demonstratable experience in: Corrosion management strategy development and implementation; Material selection for pipelines, pressure systems, and valves; Coating design and specification for onshore and offshore facilities.
</li><li>Familiarity with relevant industry codes and standards: ISO 15257, NACE, API, ASME, DNVGL, BS 7910.
</li><li>Experience in corrosion modelling, risk assessment, and monitoring techniques.
</li></ul><p><b>Desirable Experience:
</b></p><ul><li>Experience with advanced corrosion modelling software and CP knowledge.
</li><li>Exposure to Risk-Based Inspection (RBI) methodologies and life extension studies.
</li><li>Familiarity with inspection technologies and data analysis techniques.
</li></ul><p><b>Qualifications:
</b></p><ul><li>Bachelor&rsquo;s (minimum) or Master&rsquo;s (preferred) in Mechanical or Materials engineering discipline.
</li><li>Working towards Chartership or relevant professional engineer status accredited by a national or industry engineering institution.</li></ul></div>
<br><div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com<br>
</div><div></div><br>
<div><b>Diversity Statement
</b></div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Engineer – Corrosion & Materials

Bureau Veritas

<div><div><div><div><ul><li><b>Position</b></li></ul><div>
PAINTING &amp; COATING INSPECTORS</div></div><div><ul><li><b><br>
Office / Department</b></li></ul><p><br>
Abu Dhabi IND</p></div><div><ul><li><b><br>
Reporting to</b></li></ul><p><br>
Team Leader</p></div><div><ul><li><b><br>
Key Working Relationship</b></li></ul><div><ul><li>
IND Manager</li><li>
Project Manager</li><li>
Team Leader</li><li>
Technical Manager / Deputy Technical Manager</li><li>
Customers / Clients / Project Management Consultants</li><li>
He is expected to establish direct contact with Client and whenever necessary with other Bureau Veritas organization.</li></ul></div></div><p></p><div><ul><li><b><br>
Minimum Required Qualifications</b></li></ul></div><div><ul><li><b><br>
Specialty</b></li></ul><p><br>
NACE / CSWIP / British Gas Painting / Painting inspector Grade II or an approved equivalent.</p></div><div><ul><li><b><br>
Education</b></li></ul><p><br>
Degree / Diploma in Mechanical Engineering or HNC</p></div><div><ul><li><b><br>
Training</b></li></ul><div><p><br>
NACE / CSWIP / British Gas Painting / Painting inspector Grade II or an approved equivalent.</p><p>
Site Safety Induction</p><p>
Sea Survival Course for Offshore Sites</p><p>
Specific Technical Induction for Specific Projects</p></div></div><div><ul><li><b><br>
Technical knowledge</b></li></ul><div><p><br>
Strong knowledge of the International Codes &amp; Standards such as ASME, API, ANSI, ASTM and BS.</p><p>
Experience with Painting/Coating Inspection according to relevant Codes.</p><p>
Application of Codes and standards, project specifications and procedures.</p></div></div><div><ul><li><b><br>
Experience</b></li></ul><div><p><br>
Inspector/Technician : Minimum 5 years experience in similar field</p><p>
Engineer Surveyor : Minimum 8 years experience in similar field</p><p>
Senior Engineer Surveyor : Minimum 10 years experience in similar field</p></div></div><div><ul><li><b><br>
Responsibilities / Authorities / Accountabilities</b></li></ul></div><div><ul><li><b><br>
Primary Functions</b></li></ul><ul><li>
Review and comment / approve contractor&rsquo;s Painting, coating &amp; wrapping procedures.</li><li>
Carry out inspection of surface profile, chloride contamination test as per applicable standards.</li><li>
Monitor weather and equipment condition during Painting, coating operation</li><li>
Ensure that paint materials are used from approved paint manufacturers with valid pot life.</li><li>
Ensure that the application of coating is carried out as per the technical data-sheet of the manufacturer and approved painting specification.</li><li>
Ensure that proper time intervals between intermediate coats for proper chemical and mechanical bonding.</li><li>
Witness / checking of Dry Film Thickness and Holiday detection / Pin hole detection&rsquo;s and Ensure that calibrated testing equipment is used.</li><li>
Monitor surface preparation, application of bonding agent, elastomer, wrapping and curing operation (for Neoprene coating) on riser pipes / clamps.</li><li>
Witness post curing tests such as hardness, spark test, sound test, adhesion test, visual and dimensional check etc. on riser pipes / clamps.</li><li>
Monitor surface preparation, application of CTE coating and post curing tests on pipeline.</li><li>
Monitor surface preparation, application of heat shrink sleeves, holiday tests on field joints.</li><li>
Monitor surface preparation, wrapping (Servi wrap M 30 B), holiday detection and doping on offshore pipeline.<ul><li><b>
Technical Expertise</b></li></ul></li></ul></div><div><div><br>
</div><ul><li>
Strong knowledge of the International Codes &amp; Standards such as ASME, API, ANSI, ASTM and BS.</li><li>
Experience with Painting / Coating Inspection according to relevant Codes.</li><li>
Application of Codes and standards, project specifications and procedures.</li><li>
Within his field of competency, the inspector is expected to conduct the activities stated in Primary functions.</li><li>
Fully conversant with relevant inspection techniques and able to select the most appropriate inspection technique.</li><li>
Able to verify and approve Non-conformities / corrective actions</li><li>
Able to identify required Bureau Veritas interventions, based on a pre-defined Quality Plan and according to specified standards.</li><li>
Able to review / appraise inspection procedures<ul><li><b>
Business Requirements</b></li></ul></li></ul></div><div><div><br>
</div><ul><li>
Report to Team leader about day-to-day inspection, non-compliance /discrepancy to specification.<ul><li><b>
Self Management</b></li></ul></li></ul></div><div><div><br>
</div><ul><li>
Maintains a high degree of expertise through permanent specialized training and knowledge management.</li><li>
Ensure that inspection is carried out as per approved drawings / Inspection test plans.</li><li>
Meet project development objectives</li><li>
Should be Results oriented, Service driven and Problem solving</li><li>
Comply with company regulations, procedures and Code of Ethics.<ul><li><b>
Customer Focus</b></li></ul></li></ul></div><div><div><br>
</div><ul><li>
Ensure that Inspection is carried out as per Purchase order / approved drawings / Inspection test plans and other applicable Technical specifications.</li><li>
Maintain regular job related contact with clients and Liaises with client and/or Project Management Consultant with ease</li><li>
Understand client needs and work to achieve successful project outcomes.</li><li>
Develop trust and open communication with the client<ul><li><b>
HSE Requirements</b></li></ul></li></ul></div><div><div><br>
</div><ul><li>
Comply at all times with all applicable legal requirements, BV Abu Dhabi HSE Policies and procedures, client&rsquo;s HSE procedures and code of practices.</li><li>
Maintain personal work areas tidy and hazard free and report any deviation/fault/hazard immediately to the location manager/line manager/supervisor</li><li>
Report immediately any newly identified hazard and participate in devising suitable operational control to eliminate/minimize the pertinent risk.</li><li>
Report immediately any HSE incident and cooperate in investigation</li><li>
Use appropriate PPE at work area and be aware of:<ul><li>
the risks appropriate PPE will control or minimize</li><li>
Report immediately incase the PPE is worn off or lost.</li></ul></li><li>
Communicate to their immediate manager any unsafe work practice or condition and opportunities for improvement of HSE practices.</li><li>
Take care of your own health and safety and that of people who may be affected by what you do (or do not do). &middot;</li><li>
Co-operate with others on health and safety, and not interfere with, or misuse, anything provided for your health, safety or welfare.</li></ul></div><div><ul><li><b><br>
Performance Monitoring</b></li></ul></div><div><ul><li><b><br>
Continual Development</b></li></ul><div><p><br>
The opportunities for improvement in</p><ul><li>
Technical and professional competencies through attending specialized training courses and seminars</li><li>
Stay updated on all Painting &amp; Coating related developments<ul><li><b>
KPI&rsquo;s</b></li></ul></li></ul></div></div><div><div><br>
</div><div><ul><li>
Time taken to deliver the report to the Team Leader</li><li>
Quality of report</li><li>
Inspection done within the allocated timeframe</li><li>
Share information, Best practice, Knowledge Management<ul><li><b>
Monitored By</b></li></ul></li></ul></div></div><p></p><div><p><br>
Team Leader Site Inspection Services</p></div></div></div></div><p></p>

Inspector - Coating & Painting

Perma-Pipe

<p>Working Hours: 12hrs/day; 6 days a week</p><p>The <b>QHSE</b> <i><b>Engineer / QA/QC Engineer</b></i> must follow the direction of his / her immediate Supervisor and operates in accordance with the Company Policy.</p><ul><li>Carries out all quality assurance and control tasks and functions efficiently and competently within the resources assigned</li><li>He / She is responsible for inspection of raw materials, approve or reject the same, and prepare the required documentation.</li><li>He / She is responsible for the inspection during process and final stage and record the observations.</li><li>Maintains the property and assets of the QA Department, including capital equipment, laboratory facilities, testing assets, IT equipment, and NDE equipment</li><li>He / She is responsible for implementing procedures, work instructions, inspection and test plans, preparing test reports, carrying out process quality audits, preparing inspection reports</li><li>Support the Quality Inspectors to ensure smooth inspection and guide them in preparing the reports. Shall ensure that products and processes comply with the project requirements and international standards</li><li>The welding QHSE Engineer is responsible for preparing WPS/PQR/WPQ documents and co-ordinate with the TPI agencies</li><li>Coordinate with clients to undertake Procedure Qualification Tests (PQT) and inspections of prepared test specimens and witness destructive tests</li><li>The QHSE engineer shall review the non-conformities in production and process and shall propose corrective actions and ensure to prevent recurrence.</li><li>He / She shall ensure that safe work environment is available. Shall record any safety and environmental observations and bring to the notice of HOD.</li><li>He / She shall fill the HSE Observation cards and submit to HOD.</li><li>He / She shall assure that the various lab tests are conducted with integrity and the results handled with the necessary security and judgment appropriate to the nature of the test</li><li>The Senior QHSE engineer shall act as an internal quality auditor, conduct audits, creating audit reports including closing out audit findings, and determine proper corrective and preventive actions. He / she shall assist the department head in establishing, implementing and maintaining the quality management system</li><li>The Senior QHSE Engineer shall lead the team in Quality and HSE front and act as a leader for implementing and maintenance of HSE policies and plans in his / her area of work</li><li>He / she is responsible for ensuring that all the inspection and test-equipments are calibrated on time and shall liaise with the calibration agencies</li></ul><p>Job Type: Full-time</p><p>Pay: From AED10,000.00 per month</p><p>Application Question(s):</p><ul><li>Which country are you from?</li><li>What is your visa status?</li></ul><p>Education:</p><ul><li>Bachelor's (Preferred)</li></ul><p>Experience:</p><ul><li>QA/QC Engineer: 3 years (Preferred)</li></ul><p>License/Certification:</p><ul><li>CWISP 3.1 (Preferred)</li><li>BGAS Gr. 2 or NACE LEVEL II certification (Preferred)</li></ul>

QA/QC Engineer

TÜV SÜD

<p></p><div><div><div><div><div><div>INSPECTION ENGINEER
</div></div></div></div><div><div><div><div><p>T&Uuml;V S&Uuml;D &ndash; A global leader in the field of testing, inspection, management system certification and product certification renowned for quality, integrity and technical excellence.<br>
</p><p></p><p>Established more than 150 years ago in Germany, T&Uuml;V S&Uuml;D is a leading global provider of technical services with more than 28,000 highly skilled employees across 1,000 offices worldwide. T&Uuml;V S&Uuml;D offers a wide range of testing &amp; product certification, inspection, auditing &amp; system certification, training and knowledge services. We are a premium quality, safety, and sustainability solutions provider.
</p></div></div></div></div><div><div><div><div><p><b>Your Tasks
</b></p><p><b>A-Crane &amp; Lifting Equipment Inspection and Certification:
</b></p><ul><li>Execute the responsibility of inspection services and activities of Crane Department as per the scope of work.
</li><li>To carry out the Inspection, Testing and Certification of Lifting Equipment, Earth Moving Equipment, PPE, according to TUV SUD Quality and Operation Procedures, Applicable Statutory Requirements, Standards and Code of practice under his authorized scope of inspection.
</li><li>To carry out the inspection and testing services in conformance with TUV SUD Middle East Quality, Health and Safety, Environmental Management Systems Procedures (IMS), Methods &amp; Operation Procedure, International and National Standards, Code of Practice, and Applicable Statutory Requirements.
</li><li>Awareness and adherence with TUV SUD Middle East Policies, Objectives, Code of Ethics and Quality, Health &amp; Safety, and Environmental Management Systems Procedures.
</li><li>To maintain good rapport with customers both internal and external as per TUV SUD Middle East Code of Ethics.
</li><li>To prepare report / certificate of inspected equipment with relevant inspection records (checklist, timesheet and HSE risk assessment) and submit these records through ICCS system.
</li><li>To follow the Health and Safety Procedure while performing inspection on the client site and report any new hazards observed on the work site or office to the Operation Manager and to stop any unsafe activities.
</li><li>Improving personal performance and qualifications whenever required and practicing good interpersonal skills during his job assignment.
</li><li>To ensure that all inspection activities are carried out as per the requirements of IMS and ISO/IEC 17020 Standard and accreditation requirements.
</li><li>Reporting any incompliance during the job assignment to reporting manager.
</li><li>To observe hazard free and environmentally friendly working environment.
</li><li>Coordinate and complete independently assigned projects.
</li>Ensure independence, impartiality, integrity, and confidentiality are maintained during all inspection activities<br>
<li>
</li></ul><p></p><p><b>B&ndash; Examination and Certification of Persons Center Process:
</b></p><ul><li>Awareness and adherence of Certification of Persons system policies and procedures.
</li><li>Examination services and activities for Certification of Persons as per Certification of persons scope of work.
</li><li>Improving personal performance and qualification whenever required and practicing good interpersonal skills
</li><li>Following the certification of persons program and examination procedures, re-certification and reset examination, instructions and rules.
</li><li>Reporting any incompliance during the assignment.
</li><li>Issuing the examination records scores and certificates.
</li>Any other activities related to the examination division, which are necessary for contributing to the success of exam operation.<br>
<li>
</li></ul><p></p><p><b>Your Qualifications and Skills
</b></p><ul><li>Mechanical Engg Bachelor&rsquo;s degree
</li><li>Minimum 3-4 years of experience in Inspection of Lifting Equipment
</li><li>Proficiency in MS Office Suite (Excel, Word, PowerPoint).
</li><li>Driving License
</li><li>Experience in coordinating with multiple stakeholders and managing operations.
</li><li>Excellent communication and interpersonal skills.
</li>Ability to adapt and respond effectively<br>
<li>
</li></ul><p></p><p><b>What We Offer
</b></p><ul><li>Competitive compensation package.
</li><li>Paid vacation and leave benefits.
</li><li>A safe and inclusive workplace that values teamwork, innovation, and professional excellence.
</li></ul><p><b>Additional Information
</b></p><p><b>Don&rsquo;t meet every single requirement? No problem &ndash; if this role excites you, we encourage you to apply. We welcome applications from people of all backgrounds, experiences, and perspectives.<br>
</b></p></div></div></div></div><p></p><div><div><div><div><p>We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are T&Uuml;V S&Uuml;D.
</p></div></div></div></div><div><div><div><div>Work Area: Others
</div></div></div></div><div><div><div><div>Country/Region: United Arab Emirates
</div></div></div></div><div><div><div><div>Job Location: Abu Dhabi
</div></div></div></div><div><div><div><div>Working Model: Onsite
</div></div></div></div><div><div><div><div>Employment Type: Full time / regular
</div></div></div></div><div><div><div><div>Company: TUV SUD ME Abu Dhabi
</div></div></div></div><div><div><div><div>Org Unit Code: BM
</div></div></div></div><div><div><div><div>Requisition ID: 3335
</div></div></div></div><div><div><div><div>Duration in months (if limited contract):</div></div></div></div></div></div><div></div>

INSPECTION ENGINEER

Explore 829+ Engineer risk based inspection in Tagalog Jobs In Abu Dhabi this February. Find roles across top companies and apply now to boost your career.

829 engineer risk based inspection jobs IN Tagalog Jobs In Abu Dhabi

Engineer – Risk Based Inspection

Engineer – Risk Based Inspection

Engineer – Corrosion & Materials

Engineer – Corrosion & Materials

Inspector - Coating & Painting

QA/QC Engineer

INSPECTION ENGINEER