electrical engineer

civil engineer

mechanical engineer

project engineer

electrical site engineer

hvac design engineer

Al Darwish Building Contracting LLC

We Urgent required HVAC Design &amp; Execution EngineerWhich performs load calculations, system sizing, and equipment selection (AHUs, chillers) using software like HAP or Elite, followed by developing detailed drawings (AutoCAD/Revit).Load Calculations: Perform heating and cooling load calculations (using ASHRAE standards) to determine required system capacity.System Selection &amp; Sizing: Select equipment (AHU, FCU, chillers, pumps) and size ducts and pipes based on hydraulic calculations and CFM requirements.Drawing &amp; Documentation: Prepare HVAC layout drawings, schematics, and technical specifications for construction packages.Energy Efficiency &amp; Sustainability: Optimize energy performance to meet green building standards (e.g., LEED, Estidama).Coordination: Collaborate with architects, structural, and electrical teams to resolve clashes and ensure space availability.Key Execution Responsibilities (Site &amp; Project Management)Shop Drawing Review: Review and approve shop drawings, material submittals, and vendor technical submittals.Site Inspection &amp; Supervision: Supervise installation on site, ensuring compliance with design drawings, specifications, and safety standards.Testing &amp; Commissioning (T&amp;C): Oversee TAB (Testing, Adjusting, and Balancing) of air and water systems.Troubleshooting &amp; RFI: Address RFIs (Request for Information) and resolve construction challenges or design discrepancies on site.Project Documentation: Ensure accurate As-Built documentation and maintenance manuals.Required Technical SkillsSoftware: Proficiency in AutoCAD, , HVAC load calculation software (e.g., Carrier HAP), and Elite Software.Codes &amp; Standards: Strong knowledge of ASHRAE, SMACNA, NFPA, and local building codes.Calculations: Duct sizing, pipe sizing, and pump head calculations..Job Types: Full-time, PermanentPay: AED10,000.00 - AED13,000.00 per monthWork Location: In person

HVAC Design & Execution Engineer

Eye for Talent

Senior Design Engineer &ndash; HVACWe are hiring a Senior Design Engineer &ndash; HVAC with 10+ years of experience in MEP/building services. The role involves leading HVAC system design, performing calculations, and preparing design, shop, and coordination drawings in line with international standards (ASHRAE, British, European codes).You will work closely with clients, consultants, contractors, and internal teams to ensure high-quality, timely project delivery, while supporting planning, cost estimation, procurement, and technical coordination.Requirements:<ul><li>Bachelor&rsquo;s in Mechanical Engineering</li><li>Strong HVAC design experience in consultancy projects</li><li>Proficiency in AutoCAD, Revit, MS Project, and MS Office</li><li>Experience with large/complex projects preferred (Maldives experience is a plus)</li><li>Strong communication and stakeholder management skills</li></ul>Location: Dubai Experience: 10+ yearsEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>relevant: 10 years (Required)</li></ul>Work Location: In person

Senior Design Engineer – HVAC

IMEP Engineering and Contracting

We are urgently looking for a skilled and experienced HVAC Engineer to join our team in the UAE. The ideal candidate should have strong experience in designing, installing and maintaining HVAC systems, preferably within the GCC region or UAE.Key Responsibilities:<ul><li>Design, install and maintain HVAC systems</li><li>Perform load calculations and system sizing</li><li>Troubleshoot and repair HVAC equipment</li><li>Ensure compliance with safety and quality standards</li><li>Coordinate with project teams and contractors</li><li>Conduct regular inspections and preventive maintenance</li></ul>Requirements:<ul><li>Bachelor&rsquo;s degree in Mechanical Engineering or related field</li><li>Minimum 3&ndash;5 years of HVAC experience in GCC or UAE</li><li>Strong knowledge of HVAC systems, codes and standards</li><li>Good problem-solving and communication skills</li><li>Ability to work under pressure and meet deadlines</li></ul>Preferred:<ul><li>Experience with major HVAC systems and brands</li></ul>Job Type: Full-timeApplication Question(s):<ul><li>Are you willing to Join Immediately ?</li></ul>Experience:<ul><li>UAE: 3 years (Preferred)</li></ul>Work Location: In person

HVAC Engineer

KAT AL QAMAR ELECTROMECHANICAL WORKS

Job description:Job Title: HVAC Mechanical Engineer (UAE Driving License Required)Location: UAE Job Type: Full-TimeJob Description: We are looking for a motivated HVAC Mechanical Engineer to join our team. The ideal candidate will be responsible for managing HVAC projects, coordinating site activities, and supporting maintenance and installation works.Key Responsibilities:<ul><li>Manage HVAC site operations and supervise ongoing projects</li><li>Coordinate with clients, suppliers, and internal teams</li><li>Prepare quotations, cost estimates, and project proposals</li><li>Procure materials and handle purchase orders</li><li>Identify and secure new HVAC work/projects</li><li>Oversee HVAC maintenance contracts and service teams</li><li>Ensure timely completion of maintenance and project work</li><li>Troubleshoot HVAC system issues and provide technical solutions</li><li>Maintain proper documentation and reporting</li></ul>Requirements:<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering or related field</li><li>1&ndash;2 years of experience in HVAC field</li><li>Strong knowledge of HVAC systems (installation &amp; maintenance)</li><li>Proficiency in AutoCAD</li><li>Good communication and coordination skills</li><li>Ability to manage multiple sites and teams</li><li>Valid UAE driving license (mandatory)</li></ul>Additional Skills (Preferred):<ul><li>Experience in AMC (Annual Maintenance Contracts)</li><li>Knowledge of local regulations and safety standards</li><li>Strong problem-solving and leadership skills</li><li>Basic knowledge of MS Office</li></ul>License/Certification:<ul><li>UAE driving License (Required)</li></ul>Pay: AED4,000.00 - AED5,000.00 per monthLicense/Certification:<ul><li>UAE Driving License (Required)</li></ul>Work Location: In person

HVAC Mechanical Engineer

Emirates Electrical Engineering LLC

<div>
 Every employee at Al Rostamani Group plays a role in making a real difference to the business and our customers. We care for our employees by offering them meaningful and purposeful work and an opportunity to grow, learn, contribute and succeed. Today, the Al Rostamani Group has come a long way since its birth in 1957. Our group has grown steadfastly with the guiding principles of Commitment, Care &amp; Vision, alongside a strong sense of active involvement in the community. We are a well-diversified group, with a key presence in industries such as General Trading, Automobiles and Heavy Equipment, Travel, Foreign Exchange, Financial Services, Property Management, Construction, Infrastructure Development and Information Technology Services. Our Group employs approximately 2000 people from 41 different nationalities, which contributes to our multicultural and multi-national environment.
 
 
 Emirates Electrical Engineering is a specialized business platform that provides comprehensive turnkey solutions combining development, financing, construction and operation of solar rooftops for commercial and industrial building in the UAE, also a responsive and flexible organization dedicated for the design and construction of turnkey electrical power projects such as High Voltage Substations, Cable Networks and Transmission Lines.
 
 
 
 Job Purpose
 
 
 
 The Mechanical Design Engineer &ndash; MEP is responsible for developing and reviewing mechanical designs for HVAC, plumbing, drainage, and firefighting systems. The role involves preparing shop drawings, material submittals, and calculations, ensuring compliance with local and international standards. The engineer will work closely with senior engineers, MEP managers, and site teams to provide design support and technical solutions.
 
 
 
 
 Job Responsibilities
 
 
 
 
 
 Mechanical System Design &amp; Compliance
 
 
 
 <ul>
 <li>
 Develop designs for HVAC, plumbing, drainage, and firefighting systems based on project requirements.
 </li>
 <li>
 Ensure all designs comply with ASHRAE, NFPA, SMACNA, ADDC, DEWA, ADM, DCD, and ESTIDAMA standards.
 </li>
 <li>
 Assist in energy efficiency studies and ESCO project design support.
 </li>
 <li>
 Manage drafting teams assigned for each project
 
 
 </li>
 </ul>
 
 Shop Drawings &amp; Material Submittals
 
 
 
 <ul>
 <li>
 Prepare and modify shop drawings in coordination with the Senior Mechanical Design Engineer.
 </li>
 <li>
 Support in preparing material submittals and ensuring alignment with project specifications.
 </li>
 <li>
 Coordinate with MEP site teams for design-related clarifications.
 
 
 </li>
 </ul>
 
 Mechanical Calculations &amp; Control Systems
 
 
 
 <ul>
 <li>
 Perform cooling load calculations, ventilation sizing, and smoke management system calculations.
 </li>
 <li>
 Conduct pipe sizing for plumbing, LPG, drainage, and firefighting systems.
 </li>
 <li>
 Confirm firefighting pump and tank capacities per DCD regulations.
 </li>
 <li>
 Assist in developing BMS (Building Management System) control strategies and sequences of operation.
 
 
 </li>
 </ul>
 
 Technical Coordination &amp; Reporting
 
 
 
 <ul>
 <li>
 Collaborate with electrical and ELV engineers to ensure proper integration of control systems.
 </li>
 <li>
 Support the MEP and construction managers by addressing design-related issues.
 </li>
 <li>
 Prepare technical reports and documentation as required.
 </li>
 <li>
 Software &amp; Tools Utilization:
 </li>
 <li>
 Proficiency in HAP, AutoCAD, and Revit MEP.
 </li>
 <li>
 Knowledge of Elite and CFD analysis tools is a plus.
 
 
 </li>
 </ul>
 
 
 Job Requirements
 
 
 
 
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in mechanical engineering.
 </li>
 <li>
 CEM, CEA, CMVP, LEED AP, PQP, ESTIDAMA, ASHRAE, or other relevant certification is a plus..
 
 
 </li>
 </ul>
 
 Experience (5 To 10 Years Overall)
 
 
 
 <ul>
 <li>
 Minimum 5 years of experience in mechanical design for MEP projects.
 </li>
 <li>
 Minimum 3 years of experience in a consultancy firm is required.
 </li>
 <li>
 UAE experience is a must, with knowledge of local authority approvals and standards.
 
 
 </li>
 </ul>
 
 Knowledge &amp; Skills
 
 
 
 <ul>
 <li>
 HVAC System Design &ndash; Expertise in designing chilled water, DX, VRF, and ventilation systems.
 </li>
 <li>
 Load Calculations &amp; System Sizing &ndash; Proficiency in ASHRAE, CIBSE, and SMACNA standards for cooling and ventilation calculations.
 </li>
 <li>
 Plumbing &amp; Drainage Design &ndash; Designing water supply, drainage, and stormwater systems per UPC, IPC, and local regulations.
 </li>
 <li>
 Fire Protection System Design &ndash; Knowledge of NFPA standards for sprinkler, FM-200, and fire suppression systems.
 </li>
 <li>
 MEP Coordination &ndash; Collaborating with electrical and structural teams for integrated system design.
 </li>
 <li>
 Software Proficiency &ndash; Experience with AutoCAD, Revit MEP, HAP, Elite, Pipe Flow Expert, and CFD tools.
 </li>
 <li>
 Energy Efficiency &amp; Sustainability &ndash; Implementing green building strategies and ESTIDAMA/LEED compliance.
 </li>
 <li>
 Ductwork &amp; Piping Design &ndash; Knowledge of air distribution, pressure drop calculations, and pipe sizing.
 </li>
 <li>
 Specification &amp; BOQ Preparation &ndash; Writing technical specifications and preparing Bills of Quantities (BOQ).
 </li>
 <li>
 Authority Approvals &amp; Compliance &ndash; Awareness of Abu Dhabi Civil Defense, ADM, ADDC, and DEWA requirements.
 
 
 </li>
 </ul>
 At Al Rostamani Group, we seek talented people who work hard to achieve great things. We consider not only your skills and experience, but also your passion for the role, your desire to learn and how well you align with our core values of care, commitment and vision. If this position represents an opportunity you wish to pursue, we invite you to apply.
</div>

Testing & Commissioning Engineer

Cornerstone Middle East

1. Job PurposeThe HVAC T&amp;C Engineer will be responsible for the end-to-end testing, adjusting, and balancing (TAB) and final commissioning of HVAC systems to ensure they meet the original design intent, local UAE regulations, and international standards (e.g., ASHRAE).2. Key Responsibilities<ul><li>Site Inspections &amp; Pre-Commissioning: Conduct site &quot;walk-downs&quot; to verify that installations (Ducting, Piping, FCUs, AHUs, and Chillers) match the Issued For Construction (IFC) drawings.</li><li>System Testing: Perform pressure testing, duct leakage testing, water flushing, and chemical cleaning.</li><li>TAB Activities: Measure and balance air and water flow rates using calibrated instruments (anemometers, manometers, etc.) to achieve design specifications.</li><li>BMS Integration: Coordinate with the Building Management System (BMS) team to verify point-to-point testing and sequence of operations (SOO).</li><li>Compliance &amp; Handover: Prepare detailed T&amp;C reports, method statements, and punch lists for consultant approval and final project handover.</li><li>Troubleshooting: Identify and resolve mechanical and control-related deficiencies on-site to minimize project delays.</li></ul>3. Required Qualifications &amp; Skills<ul><li>Education: Bachelor&rsquo;s Degree in Mechanical Engineering or a related field.</li><li>Experience: Minimum of 5 years of hands-on experience specifically in HVAC Testing and Commissioning within the UAE.</li><li>License: A valid UAE Driving License is mandatory to facilitate travel between project sites.</li><li>Technical Knowledge: Deep understanding of Chilled Water Systems, District Cooling, VRF/DX systems, and UAE-specific codes (e.g., Dubai Municipality, DEWA, Civil Defense).</li><li>Software: Proficiency in AutoCAD, MS Office, and HVAC Load Calculation software (e.g., Carrier HAP).</li><li>Language: Excellent written and verbal English communication skills for reporting and client coordination.</li></ul>4. Preferred Attributes<ul><li>Proven track record of handing over large-scale residential, commercial, or industrial projects in the UAE.</li><li>Familiarity with LEED or Estidama commissioning requirements.</li><li>Strong leadership skills to manage site technicians and subcontractors.</li></ul>Job Types: Full-time, PermanentPay: AED5,000.00 - AED8,000.00 per monthApplication Question(s):<ul><li>Do you have a valid UAE driving License?</li><li>How many years of experience do you have experience in HVAC Commissioning and Testing?</li><li>How many years of experience do you have in HVAC Tab handling?</li></ul>Work Location: In person

SEVENTS TECHNICAL SERVICES LLC

We are seeking a skilled HVAC Draftsman to join our team. The candidate will be responsible for preparing detailed HVAC shop drawings, coordinating with other disciplines, and supporting project execution in compliance with UAE standards and project specifications.Key Responsibilities<ul><li>Prepare detailed HVAC shop drawings using AutoCAD and Revit MEP</li><li>Develop layouts for ducting, chilled water piping, and HVAC equipment (AHUs, FCUs, etc.)</li><li>Convert design drawings into accurate construction/shop drawings</li><li>Coordinate with electrical, plumbing, structural, and architectural teams</li><li>Perform clash detection using Navisworks or similar tools</li><li>Ensure compliance with UAE authority standards such as Dubai Municipality and DEWA</li><li>Prepare material take-offs and assist in Bill of Quantities (BOQ)</li><li>Update and maintain drawing revisions and documentation</li><li>Prepare as-built drawings based on site conditions</li><li>Provide technical support to engineers and site teams</li></ul>Requirements<ul><li>Diploma or Bachelor&rsquo;s degree in Mechanical Engineering or related field</li><li>Minimum 5 years of HVAC drafting experience in UAE construction projects</li><li>Proficiency in AutoCAD and Revit</li><li>Knowledge of HVAC systems, ducting, and piping layouts</li><li>Familiarity with BIM coordination and clash detection</li><li>Understanding of local regulations and international standards (e.g., ASHRAE)</li><li>Strong attention to detail and ability to meet deadlines</li></ul>Preferred Qualifications<ul><li>Experience working on high-rise or large-scale projects</li><li>Knowledge of authority submission processes in UAE</li><li>Ability to work in a fast-paced, multicultural environment</li></ul>Job Type: Full-timePay: AED3,000.00 - AED4,000.00 per monthApplication Question(s):<ul><li>How many years of experience do you have as an HVAC Draftsman in the UAE?</li><li>Are you familiar with UAE authority regulations such as Dubai Municipality and DEWA?</li><li>What types of projects have you worked on (e.g., residential, commercial, high-rise)?</li><li>Which software are you proficient in (e.g., AutoCAD, Revit)?</li><li>What is your notice period or availability to join?</li></ul>Work Location: In person

HVAC Draftsman

Explore 955+ Hvac design engineer in Dubai this May. Find roles across top companies and apply now to boost your career.

955 hvac design engineer jobs In Dubai

HVAC Design & Execution Engineer

Senior Design Engineer – HVAC

HVAC Engineer

HVAC Mechanical Engineer

Testing & Commissioning Engineer

HVAC Engineer

HVAC Draftsman