fire fighting technician Jobs in Abu Dhabi

fire fighting technician

electronics technician

mechanical site engineer ( hvac ) Jobs in Abu Dhabi

mechanical site engineer ( hvac )

technical engineer

cctv technician

hvac technician

Amentum

<div>Purpose and Scope: 
This position will perform various activities to provide preventative maintenance and repair of HVAC equipment as outlined in the requirements of a USAF contract. Under general direction and/or using detailed procedures and/or work instructions, perform simple and routine tasks or tests within, but not necessarily limited to, the area of HVACR maintenance work. 
 
Essential Responsibilities: 
Perform the following activities under specific direction in accordance with established procedures:<ul>
<li>
Assist with or perform maintenance of high- and low-pressure steam heating system as instruction allows.</li>
<li>
Assist with or perform installation, servicing and repairing of systems as instruction allows. Will need to check belts and change filters as required.</li>
<li>
Assist with or perform mounting of compressor and condenser units on associated auxiliary equipment and components.</li>
<li>
Perform minor maintenance using oral and/or written instructions on HVACR equipment as qualified and licensed.</li>
<li>
Perform other site support tasks incidental to the HVACR maintenance task assigned.</li>
<li>
Must be able to provide preventive maintenance and repair of HVAC equipment. This requirement includes chillers, air handlers, ductwork, thermostats, package units, refrigerants, pump houses, and associated components installed in various types of facilities including tension fabric shelters (TFS) at the assigned military base.</li>
<li>
Must adhere to the base&rsquo;s refrigerant management program to monitor and record refrigerant use, storage, and disposal of all refrigerant types IAW Clean Air Act and the OEBGD. Will properly dispose of all HVAC equipment refrigerant in accordance with CENTCOM and Host nation environmental regulations.</li>
<li>
Must possess required knowledge, training and certification in working with HVAC equipment.</li>
<li>
Must turn in spent or expired refrigerant to ECES Satellite Accumulation Point Manager for storage as hazardous waste.</li>
<li>
Must maintain and inspect all heating, ventilation and air conditioning systems in accordance with American National Standards Institute/American Society of Heating, Refrigerating and Air Conditioning Engineers (ANSI/ASHRAE).</li>
<li>
Other duties as assigned.</li></ul> 

Minimum Position Knowledge, Skills and Abilities Required: 
<ul>
<li>
High school diploma or equivalent and at least three (3) years of job-related experience or equivalent.</li>
<li>
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location.</li>
<li>
Must have a minimum of a verified five (5) years&rsquo; experience and or five (5) years prior military service in the HVAC AFSC/MOS with the following credentials: 1The North American Technician Excellence (NATE) certification or the Eurovent Certita Certification (ECC), or any international equivalent HVAC trained certificate, 2608 and 609 certification, or the EPA Universal CFC/HCFC Refrigerant Processing Certificate, 3Copper brazing qualified, 410K/Forklift Class III. 2000 &ndash; 10,000 lbs. certified and 5Powered Industrial Truck - skid-steer loader operators training certified.</li>
<li>
Must be fully qualified to work on the USAF systems they are assigned to work on or must have previously obtained at least a USAF 5-level certification equivalent and possess at least 3 years of experience.</li>
<li>
Must maintain a valid state driver license and be qualified to operate government general-purpose vehicles.</li>
</ul>
OTHER RESPONSIBILITIES
Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</div>

HVAC Mechanic

STAR Services

<div>BMS Service Engineer : 
Job Responsibilities : 
Preventative maintenance and reactive service of building automation and HVAC control systems 
Fault finding and rectification of control panels, field devices, networks, and software 
Use of diagnostic tools and remote service platforms to identify and resolve issues 
Evaluation of customer systems and providing technical recommendations 
Supporting site safety activities including OH&amp;S compliance and risk assessments 
Assisting with minor works, upgrades, and commissioning activities 
Providing technical input into quotes, planning, and service delivery where required 
Maintaining accurate service records, reports, and customer documentation 
Building strong working relationships with customers and internal stakeholders 
To be successful in this role, you will bring a strong technical foundation, a customer focused 
mindset, and a practical approach to problem solving. 
Essential skills and experience 
Solid understanding of HVAC fundamentals and building services systems 
Experience working in a service or maintenance environment 
Current Victorian Electrical Licence 
Strong fault finding and troubleshooting skills 
Comfortable working independently across multiple sites 
Clear written and verbal communication skills 
Strong customer engagement and interpersonal skills. 
 
Desirable skills and experience 
Experience with Building Automation Systems including Siemens Desigo, or similar platforms 
Knowledge of control networks such as BACnet, Modbus, and IP based systems PLC or building controls software exposure 
Experience with commissioning, testing, or minor project works 
Understanding of energy efficiency and optimisation principles 
Confidence using mobile devices, service management systems, and Microsoft tools 
Awareness of cyber security and OT network best practice in building systems 
To be considered for this opportunity, the successful candidate will possess the following: 
Experience with HVAC fundamentals and systems (Siemens systems desirable) 
Knowledge and experience Building Automation systems (Siemens systems desirable) 
Proficiency with computers, networks and 3rd party software ( i.e. Microsoft ) 
Experience with Building Automation / PLC / Process software programming 
Excellent written and verbal communications skills 
The ability to demonstrate strong customer engagement and relationship skills</div>

BMS Service Engineer

Anotech Energy

ALTEN Group is a world leader in Engineering and Technology consulting services providing outsourced Engineering, R&amp;D, and IT Services for different industries such as Transportation, Defence, Energy and Security with 55,000 engineers in nearly 35 countries. ANOTECH is the subsidiary of the Group delivering ALTEN's Engineering Services in Middle East and Asia.As a BMS System Engineer, your role will be focused on the effective technical delivery of BMS Projects. You shall have proactive customer driven approach, demonstrating full ownership of BMS/EPMS projects, incorporating the design, software, graphics, installation and commissioning of building automation systems.Responsibilities:&middot; Implementing BMS technical solutions for client projects using the organisation&rsquo;s BMS/EMS software and hardware platform&middot; Preparation of technical submittals (point schedules, system architectures, schematics, panel drawings, bill of material sequence of operations, Integration documents, FAT procedures, method statements, O&amp; M manuals, Training manual etc) in respect to the company&rsquo;s engineering standards&middot; Carry out Panel FAT and software FAT.&middot; To manage Site installations and sub-contractors with the support of Project Manager and Lead Engineers.&middot; To commission solutions as part of customer orders incorporating the software, graphics, installation, and commissioning of building management control systems and third-party integration.&middot; Writing and commissioning controller software through Function Block Editor&middot; Configuring and development of end user graphics to represent the building controls.&middot; Configure BMS systems &ndash; setting up servers and network. Integration to other system via Modbus, Bacnet, MQTT etc.&middot; To pre-commission control panels, field devices onto new and existing systems&middot; To commission controllers, networks and field devices into a complete control system&middot; To integrate third party systems onto BMS systems&middot; To configure and commission graphics and to document commissioning progress, site reports and assist with Operations and Maintenance manuals&middot; To handover and demonstrate the completed system to customer/consultant&middot; Participate in meetings with customers, consultants, contractors, and commissioning agents.&middot; Ensure all engineering/Technical Issues or Risks are recorded and communicated to Lead Engineer and project manager.&middot; Work in close collaboration with customer&rsquo;s project teams, consultants, main contractor, 3rd party vendors, Project Managers &amp; technical leaders for sub-parts to understand the project milestones &amp; deliverables and contribute to the overall profitability of projects and to achieve high level of customer satisfaction&middot; To ensure a safe and healthy working environment for themselves and others, at office or site locations. Operating to site requirements, Project Method statements and risk assessments, Health &amp; Safety SystemsEssential Requirements:&middot; Bachelor&rsquo;s Degree in Mechanical, Electrical, or an equivalent engineering discipline.&middot; Minimum of 3-5 years of work experience in BMS, HVAC, or Controls / Automation- Schneider Electric EBO and AS-P system experience is preferred.&middot; Previous experience working with highly complex BMS control solutions- Experience in data center industry is preferred.&middot; Knowledge of HVAC applications including Chiller Systems, Air Handling Units, Fan Coil units, Computer Room Air Handlers, Mechanical ventilation units, Sanitary and Plumbing, Fire Alarm, Low voltage, EPMS Applications for Medium/High Voltage Electrical systems, ATS, Generator, UPS and other miscellaneous systems&middot; Robust knowledge of BMS controls and HVAC with ideally some knowledge of Power management systems.&middot; Clear understanding of integration of Building Systems Protocols like BACnet, modbus, MQTT etc and IP Infrastructure&middot; Excellent communication skills and ability to work both autonomously or as a member of a team&middot; Desire to build a long-term career by learning and developing technical knowledge and skills.&middot; Flexible to travel.&middot; Available to work from project site on long term assignments.&middot; Valid UAE driving licence.&middot; Possess Abu Dhabi Visa Pay: AED6,500.00 - AED10,000.00 per monthExperience:<ul><li>work experience in BMS, HVAC, or Controls / Automation: 3 years (Required)</li><li>Building Systems Protocols like BACnet, modbus, MQTT: 3 years (Required)</li><li>Schneider Electric EBO and AS-P system : 1 year (Required)</li></ul>License/Certification:<ul><li>UAE driving licence (Required)</li></ul>Work Location: In person

System Engineer - Building Management System (BMS)

GCG Engineering Services

<div>Company Description 
With a legacy of over 40 years, GCG Engineering Services excels in delivering cutting-edge solutions and aftermarket support for precision instruments, metering systems, flow controls, heat exchangers, automation, plus electrical &amp; instrumentation bulk trading. Renowned for its reliability and expertise, GCG Engineering Services supports the Oil &amp; Gas, Water, Power, and Industrial sectors, enhancing operational efficiency and delivering unmatched value across the GCC region. 
Job Description 
<ul><li>
Install, fabricate, assemble, and repair duct systems in oil and gas facilities.</li><li>
Measure and cut ducts to the required size using appropriate tools and equipment.</li><li>
Read and interpret blueprints, schematics, and technical drawings to install ductwork according to specifications.</li><li>
Perform layout tasks and mark dimensions and reference lines on metal sheets.</li><li>
Assemble ducts by connecting the seams, joints, and other parts using appropriate sealing materials.</li><li>
Inspect ductwork for any damages, leaks, or defects and perform necessary repairs.</li><li>
Ensure proper insulation of duct systems to enhance efficiency and safety.</li><li>
Maintain tools and equipment in good working condition.</li><li>
Adhere to all safety protocols, especially while working in confined spaces or high-pressure environments typical in oil and gas projects.</li><li>
Collaborate with other trades and departments, such as HVAC technicians, welders, and engineers, to complete installations.</li></ul> 

Qualifications 
<ul><li>
High school diploma or equivalent.</li><li>
Technical certification or diploma in duct installation, HVAC, or a related field is a plus.</li><li>
3-5 years of experience in ductwork installation, with at least 2 years in the oil and gas industry.</li></ul> 

Additional Information 
<ul><li>
Willingness to work in remote locations, including offshore or desert environments, as required.</li><li>
Technical expertise in duct fabrication and installation.</li><li>
Ability to use hand and power tools safely.</li><li>
Strong problem-solving and teamwork abilities.</li><li>
Effective communication skills.</li></ul></div>

Duct Man

MASCORP HOLDING

Position SummaryWe are seeking a skilled and experienced Mechanical Engineer to design, coordinate, and oversee mechanical systems for construction and facilities management projects. The successful candidate will ensure that all mechanical works are executed in accordance with project specifications, UAE regulations, quality standards, and project schedules.Key Responsibilities<ul><li>Design, review, and supervise the installation of mechanical systems, including HVAC, plumbing, fire protection, and drainage systems.</li><li>Prepare mechanical designs, calculations, specifications, and technical documentation.</li><li>Review and approve mechanical shop drawings, material submittals, and method statements.</li><li>Coordinate with architects, structural engineers, electrical engineers, consultants, contractors, and project teams to ensure seamless project execution.</li><li>Conduct site inspections to monitor work progress, quality, and compliance with approved drawings and specifications.</li><li>Troubleshoot and resolve technical issues related to mechanical systems during construction and commissioning.</li><li>Ensure compliance with UAE building codes, local authority requirements, and health and safety regulations.</li><li>Monitor project schedules, budgets, and resource utilization to support timely project delivery.</li><li>Assist in testing, commissioning, and handover of mechanical systems.</li><li>Prepare project reports, progress updates, and technical documentation.</li><li>Support preventive maintenance planning and recommend improvements for operational efficiency in facilities management projects.</li></ul>Qualifications<ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum of 3&ndash;5 years of experience in mechanical engineering, preferably in construction or facilities management within the UAE.</li><li>Strong knowledge of HVAC, plumbing, fire fighting systems, and mechanical services.</li><li>Familiarity with UAE codes, authority regulations, and industry standards.</li><li>Proficiency in AutoCAD, Revit MEP, and Microsoft Office applications.</li><li>Knowledge of mechanical design software and BIM coordination is an advantage.</li><li>Excellent analytical, problem-solving, communication, and project coordination skills.</li><li>Ability to manage multiple projects and work under pressure.</li><li>Valid UAE driving license is an advantage.</li></ul>Experience:<ul><li>Mechanical engineering: 3 years (Preferred)</li></ul>Work Location: In person

Mechanical Engineer

<div>Company Description 
With a legacy of over 40 years, GCG Engineering Services excels in delivering cutting-edge solutions and aftermarket support for precision instruments, metering systems, flow controls, heat exchangers, automation, plus electrical &amp; instrumentation bulk trading. Renowned for its reliability and expertise, GCG Engineering Services supports the Oil &amp; Gas, Water, Power, and Industrial sectors, enhancing operational efficiency and delivering unmatched value across the GCC region. 
Job Description 
<ul><li>
Assist electricians and instrument technicians during installation and maintenance activities.</li><li>
Support cable pulling, cable dressing, cable tray installation, and conduit works.</li><li>
Assist with installation of junction boxes, isolators, panels, instruments, and field devices.</li><li>
Carry out material handling, shifting, loading, and unloading of electrical and instrumentation materials.</li><li>
Assist in cable preparation, tagging, identification, and routing activities.</li><li>
Support installation of sensors, transmitters, control devices, and HVAC field instruments.</li><li>
Assist in termination activities under the supervision of skilled technicians.</li><li>
Prepare tools, equipment, and materials required for daily E&amp;I activities.</li><li>
Perform basic tasks such as cleaning, cutting, drilling, and support installation as instructed.</li><li>
Assist during testing, inspection, and commissioning activities.</li><li>
Maintain proper storage and handling of cables, instruments, and electrical materials.</li><li>
Support troubleshooting activities by providing assistance to technicians.</li><li>
Ensure work areas are clean, organized, and free from hazards.</li><li>
Follow instructions from the E&amp;I Foreman and support completion of assigned tasks.</li><li>
Report damaged tools, unsafe conditions, and material shortages to the supervisor.</li></ul> 

Qualifications 
<ul><li>
Basic education or technical training preferred.</li><li>
Basic knowledge of electrical, instrumentation, or HVAC works is an advantage.</li><li>
Minimum 1&ndash;3 years of experience as an E&amp;I Helper in Oil &amp; Gas or Industrial projects.</li><li>
Familiarity with cables, cable trays, conduits, junction boxes, and field instruments.</li></ul> 

Additional Information 
<ul><li>
Willingness to work in remote locations as required.</li><li>
Ability to use hand and power tools safely.</li><li>
Ability perform manual work.</li><li>
Strong problem-solving and teamwork abilities.</li><li>
Effective communication skills.</li></ul></div>

Helper, E&I

Sundus

<div>
 
 Job Title:
 
 Electromechanical Maintenance Engineer
 
 
 
 Job Code:
 
 JPC 6232
 
 
 
 Location:
 
 Abu Dhabi, UAE
 
 
 
 Experience:
 
 Minimum 5 years
 
 
 
 Education:
 
 Bachelor's Degree in Electromechanical Engineering
 
 
 
 Age:
 
 25 38 years
 
 
 
 Driving License:
 
 Valid driving license required
 
 
 
 Job Description
 
 
 
 <ul>
 <li>
 Manage preventive and corrective maintenance of electrical, mechanical, HVAC, fire-fighting, elevator, and civil systems in buildings.
 </li>
 <li>
 Supervise maintenance teams, contractors, and site activities to ensure quality, safety, and timely completion of work.
 </li>
 <li>
 Monitor building operations, investigate equipment faults, and recommend effective technical solutions.
 </li>
 <li>
 Review and approve maintenance materials, spare parts, and ensure compliance with technical specifications.
 </li>
 <li>
 Coordinate construction site activities, monitor work progress, and ensure adherence to approved drawings and project schedules.
 </li>
 <li>
 Prepare maintenance reports, budgets, and coordinate with consultants and internal departments to ensure smooth operations.
 </li>
 <li>
 Fluency in Arabic and good English communication skills are required; experience in maintenance contract management is preferred.
 </li>
 </ul>
</div>

Electromechanical Maintenance Engineer

Explore 21+ Hvac technician in Abu Dhabi this August. Find roles across top companies and apply now to boost your career.