electrical engineer

mechanical engineer

civil engineer

planning engineer

project engineer

mechanical engineering draftsperson

Quant Gulf

Key Responsibilities<ul><li>Prepare 2D and 3D drawings using software such as AutoCAD, Revit, or SolidWorks</li><li>Develop detailed shop drawings, as-built drawings, and layout plans</li><li>Interpret engineering designs, sketches, and specifications into accurate drawings</li><li>Coordinate with engineers, site teams, and other disciplines (electrical, civil, etc.)</li><li>Revise drawings based on feedback and site conditions</li><li>Ensure drawings comply with project standards, codes, and regulations</li><li>Maintain proper document control and version tracking</li><li>Support project execution by providing accurate drawings for fabrication and installation</li><li>Assist in preparing BOQs and material take-offs (if required)</li></ul>Qualifications &amp; Requirements<ul><li>Diploma or Degree in Mechanical Engineering or related field</li><li>Minimum 3&ndash;5 years of experience as a Mechanical Draftsman (GCC experience preferred)</li><li>Strong proficiency in:</li><li>AutoCAD (mandatory)</li><li>Revit / BIM (preferred)</li><li>MS Office</li><li>Knowledge of HVAC, piping, or mechanical systems</li><li>Familiarity with UAE standards and codes (ASHRAE, SMACNA, etc. is a plus)</li></ul>Skills &amp; Competencies<ul><li>Strong attention to detail and accuracy</li><li>Good understanding of engineering drawings and standards</li><li>Ability to meet deadlines and work under pressure</li><li>Strong communication and coordination skills</li><li>Problem-solving mindset</li></ul>KPIs (Performance Indicators)<ul><li>Accuracy of drawings (minimal revisions required)</li><li>Timely submission of drawings</li><li>Compliance with project specifications</li><li>Coordination efficiency with project teams</li></ul>Job Type: Full-timeWork Location: In person

Mechanical Draftsman

ENGINEERING UNIT GEN. CONT.

We are seeking a highly experienced MEP Draftsman with a minimum of 5 years of experience in contracting/construction companies to join our team. The candidate will be responsible for preparing accurate shop drawings, coordination drawings, and as-built drawings for Mechanical, Electrical, and Plumbing (MEP) systems in accordance with project specifications and authority requirements.Key Responsibilities:<ul><li>Prepare MEP shop drawings, coordination drawings, and as-built drawings</li><li>Review consultant drawings and identify clashes with other disciplines</li><li>Coordinate with MEP engineers, architects, and site teams</li><li>Develop HVAC, electrical, plumbing, fire-fighting, and ELV drawings</li><li>Review and modify drawings based on design changes and site conditions</li><li>Ensure drawings comply with local authority regulations and project standards</li><li>Update drawings based on site conditions and approvals</li><li>Maintain proper drawing records and revisions</li><li>Support project execution teams as required</li></ul>Requirements:<ul><li>Diploma or Degree in Mechanical/Electrical Engineering or related field</li><li>Minimum 5 years experience as MEP Draftsman in contracting companies</li><li>Proficiency in AutoCAD (Revit MEP is an advantage)</li><li>Strong knowledge of MEP systems, construction standards, and authority submissions</li><li>Ability to read and interpret technical drawings</li><li>Strong attention to detail and time management skills</li><li>Good communication and coordination skills</li></ul>Job Type: Full-timeWork Location: In person

MEP DRAFTING ENGINEER

jadara home for real estate and development

The MEP Draftsman on-site is responsible for preparing and updating detailed MEP drawings for construction projects, working closely with site engineers, MEP engineers, and contractors. This role ensures that the mechanical, electrical, and plumbing systems are correctly implemented in line with the project's design specifications and in compliance with local building codes.Key Responsibilities:<ul><li>On-Site Drafting and Drawing Updates:</li><li>Prepare and modify MEP drawings based on real-time site conditions and requirements.</li><li>Ensure the MEP systems drawings are updated with any changes or variations on-site.</li><li>Draft layouts for HVAC systems, plumbing systems, electrical layouts, fire safety systems, and other MEP components in compliance with the project design.</li><li>Collaboration with Site Teams:</li><li>Work closely with MEP engineers, site supervisors, and contractors to ensure the MEP systems are being installed correctly as per design drawings.</li><li>Address on-site issues by modifying designs as needed to accommodate site constraints or unforeseen challenges.</li><li>Coordination of Systems Integration:</li><li>Coordinate between different systems (mechanical, electrical, plumbing) and ensure the drawings reflect proper alignment, integration, and compliance with the overall construction plans.</li><li>Assist in clash detection and resolve any conflicts between MEP systems and other structural or architectural elements.</li><li>Site Inspections:</li><li>Conduct site visits to monitor progress and ensure that the installation of MEP systems matches the design and specifications.</li><li>Participate in site meetings with contractors and engineers to provide feedback and recommendations based on the drawings.</li><li>Documentation and Record Keeping:</li><li>Maintain accurate records of all MEP drawings, revisions, and documentation as the project progresses.</li><li>Document any changes made to the drawings on-site, including design adjustments or any deviations from the original plans.</li><li>Compliance and Quality Assurance:</li><li>Ensure all MEP designs comply with local regulations, safety standards, and construction codes.</li><li>Perform regular checks and audits to ensure work is done according to the approved plans and specifications.</li><li>Liaise with Project Stakeholders:</li><li>Act as the point of contact for MEP-related issues between the construction team, designers, and clients.</li><li>Provide technical support and troubleshooting on-site for any MEP-related queries or challenges.</li><li>Time and Resource Management:</li><li>Assist in scheduling and resource management by ensuring timely updates to drawings for procurement or construction requirements.</li></ul>Skills and Qualifications:<ul><li>Education: Diploma or degree in , Electrical, Civil Engineering, or related field.</li><li>Experience: At least 5 years of experience as an MEP Draftsman, preferably in the construction industry.</li><li>Technical Skills:</li><li>Proficiency in AutoCAD, Revit, or other drafting software.</li><li>Strong understanding of MEP systems (HVAC, electrical, plumbing, etc.).</li><li>Knowledge of construction drawings, construction methods, and site procedures.</li><li>Site Experience: Familiarity with on-site construction processes, understanding site constraints, and practical problem-solving in construction environments.</li><li>Communication Skills: Ability to clearly communicate technical details and design changes with various stakeholders (engineers, architects, contractors).</li><li>Attention to Detail: Ability to identify potential design issues and ensure all drawings are accurate and compliant with project requirements.</li></ul>Job Type: Full-timePay: AED6,000.00 - AED8,000.00 per monthAbility to commute/relocate:<ul><li>Abu Dhabi: Reliably commute or planning to relocate before starting work (Preferred)</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>construction: 5 years (Required)</li><li>villas/buildings: 5 years (Required)</li><li>autocad: 5 years (Required)</li><li>mep draftsman: 5 years (Required)</li></ul>License/Certification:<ul><li>civil engineering (Required)</li></ul>Work Location: In person

MEP DRAFTSMAN

GSTS

We are looking for a skilled MEP Draftsman to prepare detailed Mechanical, Electrical, and Plumbing shop drawings, coordination drawings, and as-built drawings for construction and fit-out projects. The candidate must be able to work closely with engineers, site teams, and project managers to ensure accurate and timely drafting support.Key Responsibilities:<ul><li>Prepare MEP shop drawings based on design drawings, site conditions, and project requirements.</li><li>Produce coordinated drawings for HVAC, plumbing, drainage, firefighting, and electrical systems.</li><li>Prepare as-built drawings after project completion.</li><li>Revise drawings as per consultant comments, site changes, and engineer instructions.</li><li>Coordinate with civil, architectural, and structural drawings to avoid clashes.</li><li>Assist in quantity take-off from drawings when required.</li><li>Maintain proper drawing records, revisions, and document control.</li><li>Support site execution team with drawing clarifications and updates.</li><li>Ensure drawings comply with project specifications, local authority regulations, and company standards.</li></ul>Job Types: Full-time, PermanentPay: AED2,000.00 - AED3,000.00 per monthWork Location: In person

Draftsman MEP

Wartung General Contracting LLC

1. Supervises the preparation of technical drawings based on rough sketches, specification and calculations from engineers, surveyors and architects and MEP engineers. 2. To critically review the relevant documents prior to start of construction e.g IFC, Project Specification etc 3. Checks and corrects work prepared by others in order to conform to standards, specifications, and design requirements 4. Prepare finished drawings for construction work from sketches, specifications, and field notes 5. Prepares MEP calculations for HVAC drawings, plumbing, piping and small substation and electrical works. 6. Design change requirements, including but not limited to piping, plumbing, fire fighting design 7. Identify any deviation in the design and provide justification for the deviation. 8. Experience in MEP design detailing. 9. Report to design manger as well as MEP manager for smooth coordination for design work 10. Experienced in local Jeddah Procedures 11. be able to prepare quick, simple and accurate hand calculations to check the designing of others.Candidates currently in UAE and ready to join immediately are preferred.Kindly email your CV with a Position in the subject line including your salary expectation to: wartung.secretary@gmail.comJob Type: Full-timeAbility to commute/relocate:<ul><li>Abu Dhabi: Reliably commute or planning to relocate before starting work (Required)</li></ul>Work Location: In person

MEP - Draftsman

Confidential Careers

<div>
 
 
 JOB OBJECTIVE:
 
 
 <ul>
 <li>
 To provide piping engineering, construction management support in assigned area &amp; projects to ensure effective &amp; timely completion of mechanical engineering related issues
 </li>
 </ul>
 
 
 Description
 
 
 
 
 Technical Proposal/Feasibility Study
 
 
 <ul>
 <li>
 Provide mechanical engineering support to :
 </li>
 <li>
 Review/Perform Technical Feasibility study for brown filed/green field projects
 </li>
 <li>
 Prepare technical proposal as may be required for new projects
 </li>
 </ul>
 
 
 Engineering Review during Project Execution
 
 
 
 Provide mechanical engineering support to :
 
 <ul>
 <li>
 Review/approve engineering submittals made by Contractors during project execution &amp; ensure compliance to Companies&rsquo; technical performance
 </li>
 <li>
 Resolve technical issues that may arise during project execution
 </li>
 </ul>
 
 
 Asset Document Management
 
 
 
 Provide mechanical engineering support to:
 
 <ul>
 <li>
 Establish &amp; manage process to maintain accurate &amp; up to date technical information (Master As Built) of operating assets.
 </li>
 <li>
 Make effective use of companie&rsquo;s Document Management System to store/retrieve Master-As Built Drawings
 </li>
 </ul>
 
 
 Tender Process Management:
 
 
 
 Provide mechanical engineering support to
 
 <ul>
 <li>
 Prepare technical tender package for new tenders
 </li>
 <li>
 Obtain feedback from relevant stakeholders (O&amp;M, Customer, HSE etc) on technical tender package &amp; incorporate changes as may be required
 </li>
 <li>
 Perform review of technical submissions by bidders
 </li>
 <li>
 Ensure compliance to technical bids to companie&rsquo;s Technical Specifications.
 </li>
 <li>
 Review deviation requests as per companies&rsquo;s internal process
 </li>
 </ul>
 
 
 JOB REQUIREMENTS:
 
 
 
 
 
 A. Minimum Qualifications:
 
 
 
 <ul>
 <li>
 Bachelor's Degree in Mechanical Engineering.
 </li>
 </ul>
 
 
 
 B. Minimum Experience:
 
 
 
 <ul>
 <li>
 5 years of relevant experience in Mechanical Engineering.
 </li>
 <li>
 Experience in managing third party contactors in the execution of projects.
 </li>
 <li>
 Experience in managing multi-disciplinary projects.
 </li>
 <li>
 Skilled in the use of engineering software.
 </li>
 <li>
 Project Management experience.
 </li>
 <li>
 Engineering principles.
 </li>
 </ul>
</div>

Mechanical Project Engineer

Confidential

<div>
 
 
 About the Company
 
 
 
 
 
 
 We are looking for a skilled and hands-on Mechanical Engineer to support our factory&rsquo;s engineering and maintenance operations. The role is responsible for ensuring reliable operation of machinery, utilities, and mechanical systems while contributing to efficiency improvement and continuous optimization initiatives. This is a critical role in maintaining high equipment uptime, supporting production continuity, and driving safe and energy-efficient operations.
 
 
 
 
 
 
 
 
 
 About the Role
 
 
 
 
 
 
 The Mechanical Engineer will play a vital role in the maintenance and troubleshooting of mechanical systems, providing engineering and technical support, and contributing to projects and continuous improvement initiatives.
 
 
 
 
 
 
 
 
 
 Responsibilities
 
 
 
 
 
 
 
 Maintenance &amp; Troubleshooting
 
 
 <ul>
 <li>
 Perform preventive and corrective maintenance on mechanical equipment including pumps, motors, conveyors, compressors, boilers, chillers, valves, and HVAC systems.
 </li>
 <li>
 Diagnose mechanical failures, conduct root-cause analysis, and execute repairs to minimize downtime.
 </li>
 <li>
 Maintain accurate maintenance documentation and update CMMS records.
 </li>
 <li>
 Conduct routine inspections to identify wear, risks, and improvement opportunities.
 </li>
 </ul>
 
 
 
 
 
 Engineering &amp; Technical Support
 
 
 <ul>
 <li>
 Support installation, testing, and commissioning of new machinery and mechanical components.
 </li>
 <li>
 Provide technical support to production teams to resolve mechanical issues affecting output, quality, or safety.
 </li>
 <li>
 Review equipment performance and recommend efficiency and cost-saving improvements.
 </li>
 <li>
 Contribute to lifecycle planning and equipment upgrade initiatives.
 </li>
 </ul>
 
 
 
 
 
 Projects &amp; Continuous Improvement
 
 
 <ul>
 <li>
 Provide mechanical input for engineering and capital projects.
 </li>
 <li>
 Assist in preparing technical specifications, drawings, and material requirements.
 </li>
 <li>
 Participate in Lean initiatives such as Kaizen, 5S, and process optimization programs.
 </li>
 <li>
 Contribute to energy-saving and utility-efficiency projects.
 </li>
 </ul>
 
 
 
 
 
 Utilities &amp; Compliance
 
 
 <ul>
 <li>
 Support operation and maintenance of utility systems including compressed air, chilled water, steam, and HVAC.
 </li>
 <li>
 Monitor equipment performance and highlight deviations.
 </li>
 <li>
 Ensure adherence to safety standards, LOTO procedures, and engineering SOPs.
 </li>
 <li>
 Comply with environmental, energy, and safety regulations.
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering or related field.
 </li>
 <li>
 3&ndash;5 years of experience in mechanical maintenance or engineering within a manufacturing environment.
 </li>
 <li>
 Experience using CMMS systems.
 </li>
 </ul>
 
 
 
 
 
 Required Skills
 
 
 
 
 
 <ul>
 <li>
 Strong knowledge of boilers, compressors, pumps, chillers, and industrial utilities preferred.
 </li>
 <li>
 Solid understanding of maintenance practices and safety regulations.
 </li>
 </ul>
 
 
 
 
 
 Preferred Skills
 
 
 
 
 
 <ul>
 <li>
 Strong troubleshooting capability.
 </li>
 <li>
 Ability to read and interpret mechanical drawings and technical specifications.
 </li>
 <li>
 Experience with industrial utility systems.
 </li>
 <li>
 Knowledge of preventive maintenance planning.
 </li>
 </ul>
 
 
 
 
 
 Equal Opportunity Statement
 
 
 
 
 
 
 We are committed to diversity and inclusivity in our hiring practices and encourage all qualified candidates to apply.
 
 
 
</div>

Mechanical Engineer

Explore 687+ Mechanical engineering draftsperson in Abu Dhabi this April. Find roles across top companies and apply now to boost your career.