mechanical engineering specialist

ARCHPIX ENGINEERING CONSULTANTS

The Mechanical Engineer will work closely with multidisciplinary teams, clients, contractors, and regulatory authorities to ensure that all mechanical systems are designed and implemented in compliance with applicable codes, standards, project requirements, and industry best practices.Key ResponsibilitiesDesign &amp; Engineering&middot; Prepare mechanical engineering designs, calculations, and technical specifications for HVAC, plumbing, drainage, fire protection, and other building services systems.&middot; Develop design concepts and detailed engineering solutions in accordance with project requirements and applicable codes.&middot; Produce and review mechanical drawings, layouts, schedules, and reports.&middot; Conduct engineering calculations, load assessments, and equipment sizing.&middot; Ensure designs comply with local authority regulations, international standards, and client requirements.Project Coordination&middot; Coordinate mechanical engineering activities with architectural, structural, electrical, and other disciplines.&middot; Participate in design coordination meetings and technical discussions with clients and stakeholders.&middot; Review contractor shop drawings, material submittals, and method statements.&middot; Provide technical support during design development and construction phases.Site Supervision &amp; Quality Control&middot; Conduct site inspections to verify compliance with approved drawings and specifications.&middot; Monitor construction progress and provide technical recommendations when required.&middot; Prepare site observation reports and resolve technical issues.&middot; Ensure quality standards and safety requirements are maintained throughout project execution. Documentation &amp; Reporting&middot; Prepare engineering reports, feasibility studies, and technical evaluations.&middot; Maintain project documentation and records.&middot; Assist in preparing tender documents, BOQs, and technical specifications.&middot; Support project managers in project planning and delivery.Qualification:&middot; Bachelor's Degree in Mechanical Engineering from an accredited university.&middot; Professional Engineering registration or certification is an advantage.&middot; Minimum 3&ndash;8 years of relevant experience in engineering consultancy, building services, or construction projects.&middot; Experience with HVAC, Plumbing, Fire Fighting, and Mechanical Building Services systems.&middot; Knowledge of international and local engineering standards and codes.Technical Skills:&middot; Proficiency in AutoCAD and BIM software (Revit MEP preferred).&middot; Knowledge of mechanical design software such as HAP, Carrier, Beta, Psychometric chart or equivalent.&middot; Strong understanding of HVAC design principles and building services engineering.&middot; Ability to perform engineering calculations and prepare technical reports.&middot; Familiarity with project management and coordination processes.Pay: AED0.10 - AED1.00 per monthWork Location: In person

Consultancy Mechanical Engineer

McDermott International, Ltd

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Senior Principal Mechanical Engineer is tasked with solving unique and complex problems that broadly impact the business. They must proactively identify and solve the most complex problems that impact the Management and direction of the business. The Senior Principal Mechanical Engineer is considered a specialist in the field of Mechanical (Eng), and they offer a broad base of knowledge about the Engineering Function. The Senior Principal Mechanical Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
 </li>
 <li>
 Apply expertise to the most complex problems
 </li>
 <li>
 Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
 </li>
 <li>
 Develop and manage plans to achieve business objectives
 </li>
 <li>
 Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Direct large Mechanical Engineering team as a Lead Engineer
 </li>
 <li>
 Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standard
 </li>
 <li>
 Plan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager
 </li>
 <li>
 Ensure interfaces and deliverables are clearly identified
 </li>
 <li>
 Maintain responsibility for progress and productivity, identifying any required corrective action
 </li>
 <li>
 Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc
 </li>
 </ul>
 <li>
 Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution
 </li>
 <li>
 Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates
 </li>
 <li>
 Provide similar support for Variation Orders
 </li>
 <li>
 Interface with all disciplines to develop clash-free designs
 </li>
 <li>
 Interface with other departments to obtain input for Discipline designs and drawings
 </li>
 <li>
 Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required
 </li>
 <li>
 Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
 </li>
 <li>
 Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements
 </li>
 <li>
 Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications
 </li>
 <li>
 Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
 </li>
 <li>
 Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope
 </li>
 <li>
 Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
 </li>
 <li>
 Provide technical direction and review of Designers producing products related to Mechanical Engineering
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve design reports and procedures
 </li>
 <li>
 Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
 </li>
 <li>
 Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
 </li>
 <li>
 Assist in updating weight report based on receipt of vendor information
 </li>
 <li>
 Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary
 </li>
 <li>
 Review and (as Lead Engineer) approve design verification through single-discipline check/ inter&shy; discipline check (IDC)
 </li>
 <li>
 Provide technical support to fabrication queries
 </li>
 <li>
 Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and workforce-related
 </li>
 <li>
 Assist in providing inputs for actual, Planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved
 </li>
 <li>
 Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements
 </li>
 <li>
 Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures
 </li>
 <li>
 Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
 </li>
 <li>
 Capture lessons learned and enter into MDR's Lessons Learned system
 </li>
 <li>
 Provide leadership, mentoring, and guidance to other Engineers
 </li>
 <li>
 Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables
 </li>
 <li>
 Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities
 </li>
 <li>
 Monitor costs of own work processes
 </li>
 <li>
 Evaluate costs associated with products and solutions
 </li>
 <li>
 Assist in the maintenance of departmental technical guidelines
 </li>
 <li>
 Participate in development and maintenance of Global Procedures, Software, and Standards
 </li>
 <li>
 Incorporate approved Lessons Learned into MOR Level 2 &amp; 3 engineering procedures, as applicable
 </li>
 <li>
 May participate in standards development committees or task groups
 </li>
 <li>
 Recognized as having good communication and presentation skills (e.g., published technical papers are clearly written, actively participates in conferences and/or seminars, and/or is a capable
 </li>
 <li>
 Present design solutions or topics at "lunch and learns"; etc.)
 </li>
 <li>
 Assist the Department Manager in identifying departmental needs, including the development of personnel and technical capabilities
 </li>
 <li>
 Participate in McDermott forums and represent McDermott as a subject matter expert (SME)
 </li>
 <li>
 Provide information on employee performance to the Discipline Manager
 </li>
 <li>
 Assist the Discipline manager in interviewing job applicants
 </li>
 <li>
 Participate in Factory Acceptance Testing of various items as assigned
 </li>
 <li>
 Identify vendor assistance for installation, pre-commissioning, and commissioning purposes
 </li>
 <li>
 Update electrical load list, P&amp;IDs, and equipment lists based on receipt of vendor information
 </li>
 <li>
 Participate in HAZOP meetings, as necessary
 </li>
 <li>
 Participate in 3D model reviews, as necessary
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Act as project-based Discipline point of contact in communications and meetings with Customer counterparts
 </li>
 <li>
 Ensure substantive communications are documented
 </li>
 <li>
 Prepare bids and project's Discipline engineering budget and execution plans, updating as required
 </li>
 <li>
 Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager
 </li>
 <li>
 Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets
 </li>
 <li>
 Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan
 </li>
 <li>
 Prepare working forecasts identifying change management plans, corrective action, and real-time schedule
 </li>
 <li>
 Provide Discipline inputs for actual, planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Alert the project team of any deviation from the scope or a need for a change order
 </li>
 <li>
 Monitor progress measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others
 </li>
 <li>
 Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs
 </li>
 <li>
 Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required
 </li>
 <li>
 Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and design Reviews
 </li>
 <li>
 Review comments from Customers &amp; other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation
 </li>
 <li>
 Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning
 </li>
 <li>
 Anticipate project engineering needs and plan accordingly
 </li>
 <li>
 Coordinate with vendor for discipline-managed/procured items
 </li>
 <li>
 Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members
 </li>
 <li>
 Check and Approve Mechanical equipment list, spare parts list, and special tools list
 </li>
 <li>
 Check and Participate in Approval of detailed engineering documents/ deliverables such as:
 </li>
 <ul>
 <li>
 Mechanical Equipment Specifications and datasheets
 </li>
 <li>
 Mechanical handling philosophy report and associated requisitioning for handling equipment
 </li>
 <li>
 Noise report prepared by a consultant to ensure it complies with Project requirements
 </li>
 <li>
 Lubrication schedule, spare parts schedule
 
 </li>
 </ul>
 </ul>
 </ul>
 Reports to:
 
 
 Project: Lead Engineer, Project Engineering Manager or Project Manager
 
 
 Functional: Supervising Engineer or Department Manager
 
 
 Liaise With: All Engineering disciplines, Safety Department, Project Management Team, Document Control, Project Planner,
 
 
 Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors, Vendors, and Customers
 
 
 Supervises: Principal Mechanical Engineers, Senior Mechanical Engineers and Mechanical Engineers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor's Degree or Master's Degree in Engineering
 </li>
 <li>
 20+ years of experience in oil and gas with a major contractor or consultants predominantly performing detail design
 </li>
 <li>
 Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable to offshore
 </li>
 <li>
 Knowledgeable in project coordination and execution skills
 </li>
 <li>
 Recognized across the company as a key lead, highly innovative designer, or highly skilled analyst
 </li>
 <li>
 Preferably Registered Professional Engineer or member of professional engineering society as applicable
 </li>
 <li>
 Seasoned knowledge of engineering standards and specifications
 </li>
 <li>
 Good knowledge of engineering software
 </li>
 <li>
 Good working knowledge of the English language
 </li>
 <li>
 HSE, TQM, and cost-conscious
 </li>
 <li>
 Good organizer, motivator, and supervisor
 </li>
 <li>
 Keen on improving the effectiveness of the work
 </li>
 <li>
 Show flexibility and ensure proper hand-over with regards to:
 </li>
 <ul>
 <li>
 The replacement of colleagues during illness and holidays
 </li>
 <li>
 The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
 </li>
 <li>
 The managing/learning of current working methods and software applications
 </li>
 <li>
 The reassignment to other McDermott offices
 
 </li>
 </ul>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Principal Mechanical Engineer

Al Maqsood contracting company

Please Note: - Need an immediate joiningWe are seeking a qualified and experienced MEP Engineer with GCC experience in the construction/contracting industry. The ideal candidate should have experience in high-rise building projects and be responsible for supervising, coordinating, and managing Mechanical, Electrical, and Plumbing (MEP) works to ensure timely project completion while meeting quality and safety standards.Key Responsibilities<ul><li>Supervise and coordinate all Mechanical, Electrical, and Plumbing (MEP) works on site.</li><li>Review MEP drawings, specifications, and shop drawings to ensure compliance with project requirements.</li><li>Coordinate MEP activities with civil, architectural, and structural teams to avoid clashes and delays.</li><li>Monitor installation works to ensure compliance with approved drawings, project specifications, and applicable codes and standards.</li><li>Prepare and review material submittals, method statements, and technical documentation.</li><li>Coordinate inspections, testing, and commissioning activities with consultants and clients.</li><li>Ensure timely procurement and delivery of MEP materials and equipment.</li><li>Monitor project progress and prepare daily, weekly, and monthly progress reports.</li><li>Identify and resolve technical issues related to MEP systems during construction.</li><li>Ensure compliance with quality assurance, quality control (QA/QC), and health and safety requirements.</li><li>Attend coordination meetings with clients, consultants, subcontractors, and project teams.</li><li>Support project handover by preparing as-built drawings, operation manuals, and final documentation.</li></ul>Requirements<ul><li>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or a related engineering discipline.</li><li>Minimum 3&ndash;5 years of GCC experience in construction/contracting companies.</li><li>Experience in high-rise building projects is highly preferred.</li><li>Strong knowledge of HVAC, Plumbing, Fire Fighting, Electrical, ELV, and Building Services systems.</li><li>Familiarity with UAE regulations, local authority requirements, and international standards.</li><li>Proficiency in AutoCAD, Microsoft Office, and other relevant engineering software.</li><li>Strong coordination, problem-solving, and communication skills.</li><li>Ability to work under pressure and meet project deadlines.</li><li>Immediate joiners are preferred.</li></ul>Preferred Qualifications<ul><li>Experience in testing and commissioning of MEP systems.</li><li>Knowledge of BIM/Revit is an advantage.</li></ul>Pay: From AED4,000.00 per monthWork Location: In person

MEP Engineer

<div>
 
 Job Description
 
 
 
 
 Job Summary.
 
 
 
 Responsible for ensuring the technical integrity and quality of assigned Mechanical Engineering activities in compliance with applicable standards, regulations, specifications, and company procedures. Independently manages the professional execution of assigned work while supporting efficient project delivery in line with project schedules. Delivers quality and cost-effective engineering solutions in accordance with company directives, legal requirements, and industry standards. Also contributes to NOV team strategies and business objectives, with annual performance targets managed through standard business processes and performance tools.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Ensure technical integrity and quality of assigned Mechanical Engineering activities.
 </li>
 <li>
 Execute engineering tasks in compliance with company procedures, standards, and regulations.
 </li>
 <li>
 Independently manage and deliver assigned engineering work and project activities.
 </li>
 <li>
 Pursue continuous professional development within the discipline and area of expertise.
 </li>
 <li>
 Report deviations and recommend improvements to the Quality Management System (QMS).
 </li>
 <li>
 Contribute to continuous improvement initiatives and lessons learned (LL) activities.
 </li>
 <li>
 Support project management with general technical assignments and engineering coordination.
 </li>
 <li>
 Review engineering designs, drawings, 3D models, and technical documentation.
 </li>
 <li>
 Prepare mechanical datasheets, material requisitions, and technical bid evaluations.
 </li>
 <li>
 Perform feasibility studies, engineering analysis, calculations, and detailed engineering activities.
 </li>
 <li>
 Provide input sketches and technical guidance to drafting and 3D modeling teams.
 </li>
 <li>
 Develop engineering specifications, reports, and related technical documentation.
 </li>
 <li>
 Coordinate and interface with subcontractors, suppliers, and vendors.
 </li>
 <li>
 Support procurement activities, technical clarifications, reporting, and documentation control.
 </li>
 <li>
 Manage budgets, resource planning, deployment, and utilization for assigned activities.
 </li>
 <li>
 Train, mentor, and support less experienced engineering personnel.
 </li>
 <li>
 Report project progress and technical challenges to Lead Engineers, Engineering Managers, and Project Managers.
 </li>
 <li>
 Ensure compliance with HSEQ requirements and report non-conformities when identified.
 </li>
 <li>
 Follow safe working methods and contribute to minimizing workplace, environmental, and quality risks.
 </li>
 <li>
 Work collaboratively with peers and stakeholders to achieve shared business objectives and project deadlines.
 
 
 </li>
 </ul>
 
 KNOWLEDGE/EXPERTISE
 
 
 
 <ul>
 <li>
 Communication, people management, analytical and coordination skills.
 </li>
 <li>
 Engineer shall have good interface knowledge with other disciplines especially Process, Piping, Electrical &amp; Instrumentation etc. and knowledge of all discipline documents and drawings is required.
 </li>
 <li>
 Good Knowledge of International Mechanical Codes and Standards like ASME SEC.VIII DIV.1 / DIV.2, TEMA, PD5500, API:650, API:660, API:661, ASME, API etc. applicable to Rotary Equipment.
 </li>
 <li>
 Review designs &amp; plans, layouts, working drawings and managing resources to ensure execution of projects within time and budgeted parameters.
 </li>
 <li>
 Monitor closely the fast-track projects and meet the project deadline on time.
 </li>
 <li>
 Deftness in swiftly ramping projects in coordination with clients, consultants &amp; contractors.
 </li>
 <li>
 Allocating tasks to Team Lead &amp; Technical Expert on abroad site for technical support if required.
 </li>
 <li>
 Evaluating Equipment design progress &amp; development
 </li>
 <li>
 Exposure in Equipment design calculation and FEA
 </li>
 <li>
 Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design softwares such as Pv-Elite, Compress, TANK, etc
 </li>
 <li>
 Exposure in Layout development and Skid based designs
 </li>
 <li>
 Equipment handled should cover material of construction of CS, LTCS, SS, CS+Clad, LAS, HAS, NACE MR0175, HIC and etc. for applications with temperature ranging from hot service to cryogenic with special services like Hydrogen, Lethal, WetSour, Cyclic, Sea Water and etc.
 </li>
 <li>
 Standardization of Design Procedures and review Check list and Design Guidelines
 
 
 </li>
 </ul>
 
 Experience/Education/Skill-set Required
 
 
 
 <ul>
 <li>
 Min 8 - 10 years relevant experience in Mechanical Engineering from Oil and Gas industry (Upstream &amp; Downstream).
 </li>
 <li>
 Bachelor&rsquo;s Degree /Post graduate degree in Mechanical Engineering or equivalent degree from recognized university.
 </li>
 <li>
 Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design softwares such as Pv-Elite, Compress, TANK, etc and FEA, with material of construction of CS, LTCS, SS, CS+Clad, LAS, HAS, NACE MR0175, HIC and etc. for applications with temperature ranging from hot service to cryogenic with special services like Hydrogen, Lethal, Wetsour, Cyclic, Sea Water and etc.
 </li>
 <li>
 Review of project design basis and specifications, Evaluation of vendor offers, Raising TQs, Preparation of Technical Bid Evaluation and Post order vendor documents review.
 </li>
 <li>
 Participate in the supplier tender process including development of scope, input to the tender evaluation and clarification activities.
 </li>
 <li>
 Preparation of Deliverable list &amp; Schedule, Man-hour estimate, Resource requirement and Progress report if required.
 </li>
 <li>
 Participating in Design Review and Progress Review meetings. Evaluation / Review / Checking of Design Documents / Drawings
 </li>
 <li>
 Shall have good communication, people management, analytical and coordination skills. Good interface knowledge with other disciplines especially Process, Piping, Electrical &amp; Instrumentation etc. and knowledge of all discipline documents and drawings is required.
 </li>
 <li>
 Good Knowledge of International Mechanical Codes and Standards like ASME SEC.VIII DIV.1 / DIV.2, TEMA, PD5500, API:650, API:660, API:661, ASME, API etc. applicable to Rotary Equipment.
 </li>
 <li>
 Monitor closely the fast-track projects and meet the project deadline on time. Deftness in swiftly ramping projects in coordination with clients, consultants &amp; contractors.
 </li>
 <li>
 Exposure in Layout development and Skid based design
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Every day, the oil and gas industry&rsquo;s best minds put more than 150 years of experience to work to help our customers achieve lasting success.
 
 
 
 We Power the Industry that Powers the World
 
 
 
 Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success&mdash;now and in the future.
 
 
 
 Global Family
 
 
 
 We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work.
 
 
 
 Purposeful Innovation
 
 
 
 Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better.
 
 
 
 Service Above All
 
 
 
 This drives us to anticipate our customers&rsquo; needs and work with them to deliver the finest products and services on time and on budget.
</div>

Mechanical Engineer - Static

ZEBRA CITY BUILDING CONTRACTING

Job Title: MEP EngineerJob Summary:We are seeking a highly skilled and detail-oriented MEP Engineer to join our team. The successful candidate will be responsible for the design, coordination, implementation, and management of mechanical, electrical, and plumbing systems for various construction projects. You will work closely with architects, contractors, and project managers to ensure systems are integrated efficiently, cost-effectively, and sustainably.Qualifications:<ul><li>Bachelor&rsquo;s degree in Mechanical, Electrical, or related Engineering discipline.</li><li>Professional Engineer (PE) license or equivalent is a plus.</li><li>Minimum of 2 years of experience in MEP design and construction.</li><li>Proficiency in design software such as AutoCAD, Revit MEP</li><li>Strong knowledge of building codes, NFPA, ASHRAE, NEC, and local regulations.</li><li>Excellent problem-solving, communication, and project management skills.</li></ul>Job Type: Full-timePay: AED35,000.00 - AED60,000.00 per yearAbility to commute/relocate:<ul><li>Dubai: Reliably commute or planning to relocate before starting work (Required)</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>MEP: 2 years (Required)</li></ul>Language:<ul><li>English (Required)</li></ul>License/Certification:<ul><li>UAE driving licese (Required)</li></ul>Location:<ul><li>Dubai (Preferred)</li></ul>Work Location: In person

Quality Expertise Technical Services LLC

We are seeking a qualified and motivated Mechanical Engineer to work as a Receiving Authority (RA) / Job Performer for industrial site operations. The ideal candidate should have experience working in heavy industrial environments and possess strong coordination, safety, and technical skills.Key Responsibilities<ul><li>Perform duties as a Receiving Authority (RA) / Job Performer in accordance with site procedures and safety requirements.</li><li>Coordinate with operations, maintenance, and contractor teams to ensure safe execution of work activities.</li><li>Review work permits, risk assessments, and method statements.</li><li>Monitor site activities and ensure compliance with HSE standards.</li><li>Support mechanical maintenance, inspection, and project-related activities.</li><li>Prepare and maintain technical documentation and reports.</li><li>Assist in planning and execution of shutdown and maintenance activities.</li></ul>Requirements<ul><li>Diploma or Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 2 years of Gulf site experience.</li><li>Experience working in heavy industrial environments (e.g., aluminium, steel, oil &amp; gas, power plants, manufacturing, etc.).</li><li>Good understanding of permit-to-work systems and site safety practices.</li><li>Proficiency in English with strong verbal and written communication skills.</li><li>Candidates with AutoCAD and CAD Modeling knowledge will be preferred.</li></ul>Preferred Skills<ul><li>Strong problem-solving and analytical abilities.</li><li>Ability to work independently and as part of a team.</li><li>Good coordination and stakeholder management skills.</li><li>Familiarity with maintenance and industrial project environments.</li></ul>Experience:<ul><li>Gulf: 2 years (Preferred)</li></ul>Work Location: On the road

Mechanical Engineer - Receiving Authority (RA) / Job Performer

Mecon Star Electromechanical Works LLC

Looking for a mechanical engineer with MEP experience in residential and commercial projects.Adequate knowledge in all HVAC and plumbing systems mandatory.Job Type: Full-timePay: AED5,000.00 - AED6,000.00 per monthEducation:<ul><li>Bachelor's (Preferred)</li></ul>Experience:<ul><li>EMARAT/ENOC Projects: 2 years (Preferred)</li><li>HVAC projects: 2 years (Preferred)</li></ul>Work Location: In person

Mechanical Engineer (MEP)

Explore 648+ Mechanical engineering specialist in Dubai this July. Find roles across top companies and apply now to boost your career.

648 mechanical engineering specialist jobs In Dubai

Consultancy Mechanical Engineer

Senior Principal Mechanical Engineer

MEP Engineer

Mechanical Engineer - Static

MEP Engineer

Mechanical Engineer - Receiving Authority (RA) / Job Performer

Mechanical Engineer (MEP)