hse qa qc manager

quality control engineer Jobs in Kuwait City

quality control engineer

technical inspector (allied trades) Jobs in Kuwait City

technical inspector (allied trades)

junior qa tester (manual & automation) Jobs in Kuwait City

junior qa tester (manual & automation)

ndt / leea inspector

quality control inspector

Amentum

<div>The CH47 Aircraft Technical Inspector is responsible for maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment.<ul>
<li>
Inspect, remove, install, repair, replace, modify, disassemble, reassemble, and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications.</li>
<li>
Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.</li>
<li>
Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data.</li>
<li>
Review and approve locally developed procedures and solutions to complex repair situations.</li>
<li>
Perform analysis of defects and interprets quality control rejection and failure trends.</li>
<li>
Monitor safety, training, and certification requirements.</li>
<li>
Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.</li>
<li>
Monitor tool control programs, inspects, and maintains records to ensure that measuring and test equipment meets calibration requirements.</li>
<li>
Maintain Quality, Safety, Training and Certification Records.</li>
<li>
Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.</li>
<li>
Inspect forms and records related to aircraft maintenance.</li>
<li>
Perform other qualified duties as assigned.</li>
</ul>
Minimum Requirements:<ul>
<li>
High School Diploma or equivalent required.</li>
<li>
Shall have five years of recent applicable aircraft maintenance experience.</li>
<li>
Shall have at least one-year experience inspecting CH47 aircraft assigned.</li>
<li>
U.S. military technical school or specialized training course is desired, certification of education level is required.</li>
<li>
Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</li>
<li>
If no A&amp;P, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.</li>
<li>
Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.</li>
<li>
Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 2 plus year validity on expiration date of passport at the time of hiring.</li>
<li>
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location.</li>
<li>
Must be able to pass Army MOD Medical for deployment.</li>
<li>
Must be able to obtain Kuwait Visa.</li>
</ul>
Knowledge &amp; Skills
<ul><li>Possess good communication skills; be adaptable, diversified, and capable of troubleshooting entire aircraft system.</li>
<li>
Working knowledge of electrical, electronic, mechanical, and associated systems principles to complete properly all probable work tasks.</li>
<li>
Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.</li>
<li>
Able to determine when faulty systems or assemblies can be corrected through repair of replacement of new parts and the nature and extent of repair required.</li>
<li>
Must have skill in reading, applying, and interpreting technical data.</li>
</ul>
Physical Requirements/Working Environment<ul>
<li>
Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions.</li></ul> 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aircraft Technical Inspector (CH47) - Buehring, Kuwait

<div>
 The
 
 CH47 Aircraft Technical Inspector
 
 is responsible for maintaining the Quality Control, Environmental and Safety Programs at the field level in support of assigned aircraft and Support Equipment.
 
 
 <ul>
 <li>
 Inspect, remove, install, repair, replace, modify, disassemble, reassemble, and calibrate complex aircraft mechanical and electromechanical systems in accordance with maintenance manuals, test procedures and other military publications.
 </li>
 <li>
 Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.
 </li>
 <li>
 Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards, and technical data.
 </li>
 <li>
 Review and approve locally developed procedures and solutions to complex repair situations.
 </li>
 <li>
 Perform analysis of defects and interprets quality control rejection and failure trends.
 </li>
 <li>
 Monitor safety, training, and certification requirements.
 </li>
 <li>
 Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.
 </li>
 <li>
 Monitor tool control programs, inspects, and maintains records to ensure that measuring and test equipment meets calibration requirements.
 </li>
 <li>
 Maintain Quality, Safety, Training and Certification Records.
 </li>
 <li>
 Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.
 </li>
 <li>
 Inspect forms and records related to aircraft maintenance.
 </li>
 <li>
 Perform other qualified duties as assigned.
 
 
 </li>
 </ul>
 
 Minimum Requirements
 
 :
 
 
 <ul>
 <li>
 High School Diploma or equivalent required.
 </li>
 <li>
 Shall have five years of recent applicable aircraft maintenance experience.
 </li>
 <li>
 Shall have at least one-year experience inspecting CH47 aircraft assigned.
 </li>
 <li>
 U.S. military technical school or specialized training course is desired, certification of education level is required.
 </li>
 <li>
 Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).
 </li>
 <li>
 If no A&amp;P, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.
 </li>
 <li>
 Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the CH47 airframe they will be inspecting.
 </li>
 <li>
 Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 2 plus year validity on expiration date of passport at the time of hiring.
 </li>
 <li>
 Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for a facility credentials/authorization at the work location.
 </li>
 <li>
 Must be able to pass Army MOD Medical for deployment.
 </li>
 <li>
 Must be able to obtain Kuwait Visa.
 
 
 </li>
 </ul>
 
 Knowledge &amp; Skills
 
 
 
 <ul>
 <li>
 Possess good communication skills; be adaptable, diversified, and capable of troubleshooting entire aircraft system.
 </li>
 <li>
 Working knowledge of electrical, electronic, mechanical, and associated systems principles to complete properly all probable work tasks.
 </li>
 <li>
 Knowledge of Quality Control, Production and Supply procedures required to perform job assignment.
 </li>
 <li>
 Able to determine when faulty systems or assemblies can be corrected through repair of replacement of new parts and the nature and extent of repair required.
 </li>
 <li>
 Must have skill in reading, applying, and interpreting technical data.
 
 
 </li>
 </ul>
 
 Physical Requirements/Working Environment
 
 
 
 <ul>
 <li>
 Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
 </li>
 <li>
 Must be able to lift/push/pull minimum of 50 pounds.
 </li>
 <li>
 May work in maintenance shop or outside.
 </li>
 <li>
 Must be able to work in a shop where the environment is drafty, noisy, and dirty.
 </li>
 <li>
 May be exposed to extreme noise from operating equipment.
 </li>
 <li>
 May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
 </li>
 <li>
 May be expected to work in austere environments and all-weather conditions.
 
 
 </li>
 </ul>
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>

Advanced Construction technology service

We need to hire a new QC Inspector have good experience in Concrete with an ACI certificate - Inside Kuwait only - visa 18Job Type: Full-time

QC Inspector

RECAFCO

Role Purpose: Ensure all precast concrete products meet required quality standards through inspections, testing, and monitoring of production processes.Key Responsibilities:<ul><li>Inspect raw materials and monitor casting, curing, and finishing of precast elements.</li><li>Conduct concrete tests (slump, temperature, density) and coordinate compressive strength tests.</li><li>Check dimensions, surface quality, and compliance with drawings/specifications.</li><li>Maintain QC records, test reports, NCRs, and checklists.</li><li>Identify non-conformities, lead root-cause analysis, and follow up on corrective actions.</li><li>Ensure compliance with ISO 9001, ASTM/BS/EN standards.</li><li>Support continuous improvement to reduce rejection rates.</li></ul>Qualifications:<ul><li>Bachelor&rsquo;s in Civil Engineering or related field.</li><li>2&ndash;6 years&rsquo; experience in precast or concrete manufacturing.</li><li>Strong knowledge of concrete technology and QA/QC processes.</li></ul>Skills:<ul><li>Attention to detail, problem-solving, reporting skills, and ability to read technical drawings.</li><li>Strong communication and coordination in a fast-paced factory environment.</li></ul>Job Type: Permanent

Quality Control Engineer

Premier Tubular Inspection Service Pvt Ltd.

Job Purpose:The NDT/LEEA Inspector is responsible for conducting Non-Destructive Testing (NDT) and Lifting Equipment Engineering Association (LEEA) inspections to ensure equipment integrity, compliance with international standards, and safety of lifting operations. The role ensures inspections are carried out accurately, documented properly, and communicated effectively to support operational safety and client requirements.Responsibilities:Inspection &amp; Testing<ul><li>Conduct NDT (UT, MT, PT, RT, VT) inspections in accordance with applicable codes and standards.</li><li>Perform LEEA-certified inspections of lifting equipment, cranes, hoists, slings, shackles, and lifting accessories.</li><li>Ensure calibration and validity of inspection/testing equipment before use.</li><li>Record and maintain detailed inspection/test reports for clients and internal use.</li></ul>Compliance &amp; Quality Assurance<ul><li>Ensure all inspections comply with ISO, ASME, API, LEEA, and local regulatory requirements.</li><li>Verify compliance of lifting gear with certification and traceability requirements.</li><li>Identify non-conformities and recommend corrective actions.</li><li>Support audits and client verification visits.</li></ul>Job Type: Full-time

NDT / LEEA Inspector

Propel Consult

Role PurposeThe Digital Printing Shop Branch Manager is responsible for planning, coordinating, and supervising all aspects of digital printing operations. The role includes managing staff, equipment, materials, and schedules to meet client deadlines and maintain high-quality output. The manager also oversees sales operations, both in-store and online, ensuring excellent customer service, operational efficiency, and cost control.KEY RESPONSIBILITIES, ACCOUNTABILITIES AND ACTIVITIESGeneral Production Management:&middot; Oversee all aspects of the digital printing process, including large-format printing, vinyl cutting, laminating, and finishing.&middot; Ensure efficient workflow, job scheduling, and resource allocation to meet production targets.Quality Control:&middot; Implement and maintain quality control procedures to ensure production of high-quality printed materials.&middot; Conduct regular inspections to identify and resolve quality issues.Equipment Maintenance:&middot; Coordinate equipment maintenance and repairs to minimize downtime.&middot; Maintain an inventory of consumables and reorder supplies as needed.Team Leadership:&middot; Hire, train, and supervise production staff including operators and technicians.&middot; Set performance goals, provide feedback, and conduct evaluations.Safety Compliance:&middot; Ensure compliance with safety regulations and best practices.&middot; Provide safety training for all staff.&middot; Oversee daily branch cleaning and maintenance standards.Client Communication:&middot; Collaborate with sales and customer service teams to understand project specifications.&middot; Handle walk-in, offline, and online customers effectively.Cost Management:&middot; Monitor production costs and implement cost-saving measures without compromising quality.&middot; Control wastage and ensure optimal resource use.Technology Integration:&middot; Stay current with digital printing advancements.&middot; Identify opportunities for process improvement and technology upgradesBACKGROUND, QUALIFICATIONS &amp; EXPERIENCEQualifications&middot; Bachelor&rsquo;s degree in a related field (e.g., Printing Management).&middot; Minimum 3&ndash;5 years&rsquo; experience in the digital printing industry.&middot; Proficiency in Adobe Photoshop, Illustrator, and CorelDRAW.&middot; Strong Arabic and English typing and communication skills.&middot; Expertise in operating a range of printing machines (e.g., Mimaki, Epson, HP).&middot; Advanced skills in Microsoft Office and internet tools.&middot; Proven leadership and production management experience.&middot; Knowledge of printing techniques, media types, and quality control standards.Skills&middot; Leadership and team management&middot; Technical expertise in digital printing&middot; Quality control and attention to detail&middot; Problem-solving and decision-making&middot; Time management and organization&middot; Client relationship management and communication&middot; Budget and cost managementJob Types: Full-time, Permanent

Digital Printing Shop Branch Manager

Explore 183+ Quality control inspector in Kuwait City this December. Find roles across top companies and apply now to boost your career.

183 quality control inspector jobs IN Kuwait City

Aircraft Technical Inspector (CH47) - Buehring, Kuwait

Aircraft Technical Inspector (CH47) - Buehring, Kuwait

Aircraft Technical Inspector (CH47) - Buehring, Kuwait

QC Inspector

Quality Control Engineer

NDT / LEEA Inspector

Digital Printing Shop Branch Manager