senior mechanical design engineer

ARTELIA

<div>1- QUALIFICATIONS 
<ul>
<li>
Bachelor's degree in Mechanical Engineering</li>
<li>More than 10 years of experience in design of Pumping stations, Wastewater treatment plants, District Cooling Plants, infrastructure, etc.</li>
<li>Experience with HVAC and Pumps design</li>
<li>Experience in rehabilitation projects</li>
<li>Experience working within engineering consultancies is mandatory</li>
<li>Experience in projects in GCC, mainly in UAE and KSA</li>
<li>Knowledge of relevant Saudi and UAE Standards</li>
<li>HAP software experience</li>
<li>Knowledge of hydraulic and surge analysis software&rsquo;s is a plus</li></ul> 


2- RESPONSIBILITIES 
<ul>
<li>
Lead the mechanical design of water and wastewater treatment facilities</li>
<li>Design pumping stations, lift stations, treatment plants, desalination support facilities, reservoirs, and associated mechanical infrastructure</li>
<li>Prepare mechanical design criteria and basis of design reports</li>
<li>Perform equipment sizing calculations and selection for: pumps, blowers, mixers, compressors, screens, grit removal equipment, clarifiers, sludge handling equipment, odor control systems, chemical dosing systems, UV disinfection systems, building HVAC</li>
<li>Prepare equipment layouts and plant arrangements</li>
<li>Design piping systems, valve arrangements and mechanical utilities</li>
<li>Prepare equipment and valve schedules</li>
<li>Prepare Building HVAC layouts</li>
<li>Prepare BOQs</li>
<li>Prepare specifications for Mechanical equipment</li>
<li>Prepare Datasheets for Mechanical equipment</li>
<li>Coordinate with end clients and suppliers</li>
<li>Perform Value Engineering studies</li>
<li>Provide support in proposals/tenders</li></ul></div>

Senior Mechanical Design Engineer

Arec Engineering Consultants

Location: Dubai, UAE Job Type: Full-timeAREC Engineering Consultant is looking for a Senior Mechanical Design Engineer with 7+ years of experience in Mechanical Building Services Design.Requirements:<ul><li>Minimum 7+ years of Mechanical Design experience.</li><li>Dubai consultancy experience is mandatory.</li><li>Consultancy background is required.</li><li>Strong proficiency in Revit (MEP) and AutoCAD.</li><li>Solid experience in HVAC, Plumbing &amp; Fire Fighting Design.</li><li>Good knowledge of Dubai Authority regulations (DEWA, DCD, Dubai Municipality).</li></ul>Responsibilities:<ul><li>Prepare mechanical design drawings, calculations, and tender documents.</li><li>Design HVAC, Plumbing &amp; Fire Fighting systems.</li><li>Coordinate with multidisciplinary teams using Revit (MEP).</li><li>Review shop drawings and ensure compliance with Dubai standards.</li></ul>Job Type: Full-timeWork Location: In person

Senior Mechanical Engineer

McDermott International, Ltd

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Senior Principal Mechanical Engineer is tasked with solving unique and complex problems that broadly impact the business. They must proactively identify and solve the most complex problems that impact the Management and direction of the business. The Senior Principal Mechanical Engineer is considered a specialist in the field of Mechanical (Eng), and they offer a broad base of knowledge about the Engineering Function. The Senior Principal Mechanical Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
 </li>
 <li>
 Apply expertise to the most complex problems
 </li>
 <li>
 Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
 </li>
 <li>
 Develop and manage plans to achieve business objectives
 </li>
 <li>
 Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Direct large Mechanical Engineering team as a Lead Engineer
 </li>
 <li>
 Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MOR, and project-specific procedures and to a high professional standard
 </li>
 <li>
 Plan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager
 </li>
 <li>
 Ensure interfaces and deliverables are clearly identified
 </li>
 <li>
 Maintain responsibility for progress and productivity, identifying any required corrective action
 </li>
 <li>
 Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc
 </li>
 </ul>
 <li>
 Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements, including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution
 </li>
 <li>
 Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates
 </li>
 <li>
 Provide similar support for Variation Orders
 </li>
 <li>
 Interface with all disciplines to develop clash-free designs
 </li>
 <li>
 Interface with other departments to obtain input for Discipline designs and drawings
 </li>
 <li>
 Maintain close coordination with other engineering disciplines, Planning, and Project Management Team, as required
 </li>
 <li>
 Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
 </li>
 <li>
 Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements
 </li>
 <li>
 Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications
 </li>
 <li>
 Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
 </li>
 <li>
 Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope
 </li>
 <li>
 Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
 </li>
 <li>
 Provide technical direction and review of Designers producing products related to Mechanical Engineering
 </li>
 <li>
 Prepare, review, and (as Lead Engineer) approve design reports and procedures
 </li>
 <li>
 Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
 </li>
 <li>
 Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
 </li>
 <li>
 Assist in updating weight report based on receipt of vendor information
 </li>
 <li>
 Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary
 </li>
 <li>
 Review and (as Lead Engineer) approve design verification through single-discipline check/ inter&shy; discipline check (IDC)
 </li>
 <li>
 Provide technical support to fabrication queries
 </li>
 <li>
 Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and workforce-related
 </li>
 <li>
 Assist in providing inputs for actual, Planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved
 </li>
 <li>
 Present issues and problems to Customers in a timely manner and assist the Lead Engineer in negotiating resolution in accordance with project and company requirements
 </li>
 <li>
 Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures
 </li>
 <li>
 Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
 </li>
 <li>
 Capture lessons learned and enter into MDR's Lessons Learned system
 </li>
 <li>
 Provide leadership, mentoring, and guidance to other Engineers
 </li>
 <li>
 Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables
 </li>
 <li>
 Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities
 </li>
 <li>
 Monitor costs of own work processes
 </li>
 <li>
 Evaluate costs associated with products and solutions
 </li>
 <li>
 Assist in the maintenance of departmental technical guidelines
 </li>
 <li>
 Participate in development and maintenance of Global Procedures, Software, and Standards
 </li>
 <li>
 Incorporate approved Lessons Learned into MOR Level 2 &amp; 3 engineering procedures, as applicable
 </li>
 <li>
 May participate in standards development committees or task groups
 </li>
 <li>
 Recognized as having good communication and presentation skills (e.g., published technical papers are clearly written, actively participates in conferences and/or seminars, and/or is a capable
 </li>
 <li>
 Present design solutions or topics at "lunch and learns"; etc.)
 </li>
 <li>
 Assist the Department Manager in identifying departmental needs, including the development of personnel and technical capabilities
 </li>
 <li>
 Participate in McDermott forums and represent McDermott as a subject matter expert (SME)
 </li>
 <li>
 Provide information on employee performance to the Discipline Manager
 </li>
 <li>
 Assist the Discipline manager in interviewing job applicants
 </li>
 <li>
 Participate in Factory Acceptance Testing of various items as assigned
 </li>
 <li>
 Identify vendor assistance for installation, pre-commissioning, and commissioning purposes
 </li>
 <li>
 Update electrical load list, P&amp;IDs, and equipment lists based on receipt of vendor information
 </li>
 <li>
 Participate in HAZOP meetings, as necessary
 </li>
 <li>
 Participate in 3D model reviews, as necessary
 </li>
 <li>
 When acting as Lead Engineer, in addition:
 </li>
 <ul>
 <li>
 Act as project-based Discipline point of contact in communications and meetings with Customer counterparts
 </li>
 <li>
 Ensure substantive communications are documented
 </li>
 <li>
 Prepare bids and project's Discipline engineering budget and execution plans, updating as required
 </li>
 <li>
 Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager
 </li>
 <li>
 Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets
 </li>
 <li>
 Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan
 </li>
 <li>
 Prepare working forecasts identifying change management plans, corrective action, and real-time schedule
 </li>
 <li>
 Provide Discipline inputs for actual, planning, and forecasting progress reports, including associated productivity
 </li>
 <li>
 Alert the project team of any deviation from the scope or a need for a change order
 </li>
 <li>
 Monitor progress measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others
 </li>
 <li>
 Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs
 </li>
 <li>
 Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required
 </li>
 <li>
 Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and design Reviews
 </li>
 <li>
 Review comments from Customers &amp; other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation
 </li>
 <li>
 Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning
 </li>
 <li>
 Anticipate project engineering needs and plan accordingly
 </li>
 <li>
 Coordinate with vendor for discipline-managed/procured items
 </li>
 <li>
 Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members
 </li>
 <li>
 Check and Approve Mechanical equipment list, spare parts list, and special tools list
 </li>
 <li>
 Check and Participate in Approval of detailed engineering documents/ deliverables such as:
 </li>
 <ul>
 <li>
 Mechanical Equipment Specifications and datasheets
 </li>
 <li>
 Mechanical handling philosophy report and associated requisitioning for handling equipment
 </li>
 <li>
 Noise report prepared by a consultant to ensure it complies with Project requirements
 </li>
 <li>
 Lubrication schedule, spare parts schedule
 
 </li>
 </ul>
 </ul>
 </ul>
 Reports to:
 
 
 Project: Lead Engineer, Project Engineering Manager or Project Manager
 
 
 Functional: Supervising Engineer or Department Manager
 
 
 Liaise With: All Engineering disciplines, Safety Department, Project Management Team, Document Control, Project Planner,
 
 
 Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors, Vendors, and Customers
 
 
 Supervises: Principal Mechanical Engineers, Senior Mechanical Engineers and Mechanical Engineers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor's Degree or Master's Degree in Engineering
 </li>
 <li>
 20+ years of experience in oil and gas with a major contractor or consultants predominantly performing detail design
 </li>
 <li>
 Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable to offshore
 </li>
 <li>
 Knowledgeable in project coordination and execution skills
 </li>
 <li>
 Recognized across the company as a key lead, highly innovative designer, or highly skilled analyst
 </li>
 <li>
 Preferably Registered Professional Engineer or member of professional engineering society as applicable
 </li>
 <li>
 Seasoned knowledge of engineering standards and specifications
 </li>
 <li>
 Good knowledge of engineering software
 </li>
 <li>
 Good working knowledge of the English language
 </li>
 <li>
 HSE, TQM, and cost-conscious
 </li>
 <li>
 Good organizer, motivator, and supervisor
 </li>
 <li>
 Keen on improving the effectiveness of the work
 </li>
 <li>
 Show flexibility and ensure proper hand-over with regards to:
 </li>
 <ul>
 <li>
 The replacement of colleagues during illness and holidays
 </li>
 <li>
 The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
 </li>
 <li>
 The managing/learning of current working methods and software applications
 </li>
 <li>
 The reassignment to other McDermott offices
 
 </li>
 </ul>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Principal Mechanical Engineer

Vanderlande

<div>
 
 Together we make the difference
 
 
 
 We are a leading provider of innovative and high-performance solutions for airport logistics. Our portfolio includes products and solutions for baggage and cargo handling, high-end software for the digitalization of logistics processes as well as an extensive range of maintenance and services. Major customers include renowned airports and airlines around the globe.
 
 
 We are looking for a
 
 Jr. Mechanical Design &amp; Layout Engineer
 
 to join our highly skilled Engineering team in
 
 Dubai, UAE
 
 . This role suits a proactive team player with a positive learning mindset and may require temporary relocation within the Middle East or other countries for project assignments.
 
 
 
 What are my responsibilities?
 
 
 
 <ul>
 <li>
 Prepare project mechanical layouts using Revit (mandatory), AutoCAD, and Autodesk Inventor.
 </li>
 <li>
 Develop manufacturing drawings and manage installation drawings (including sections and supporting documentation such as clash reports).
 </li>
 <li>
 Coordinate with other engineering disciplines (Electrical, Steelworks, PLC/IT, etc.) to ensure design integration.
 </li>
 <li>
 Prepare BOM/BOQ/RFQ for procurement of mechanical equipment in line with project specifications.
 </li>
 <li>
 Coordinate technically with suppliers to finalize equipment selections and support SAP processes for material ordering (including material number creation where applicable).
 </li>
 <li>
 Prepare and submit design documentation for client approval (e.g., material submittals, O&amp;M manuals, functional descriptions), and address client/consultant comments.
 </li>
 <li>
 Manage building interfaces (space requirements, accessibility, safety, architectural constraints) and check building drawings (MEP/FLS/architecture/structure) to generate clash reports/drawings.
 </li>
 <li>
 Support site execution through design surveys, handling site problem reports/open points, responding to technical queries, and supporting snagging and commissioning teams as required.
 </li>
 <li>
 Prepare accurate as-built documentation and maintain compliance with established engineering standards and procedures.
 </li>
 <li>
 Maintain a strong focus on quality, safety, and client satisfaction.
 
 
 </li>
 </ul>
 
 What do I need to qualify for the role?
 
 
 
 <ul>
 <li>
 BSc Mechanical Engineering + 3 years experience, or Diploma + 5 years experience.
 </li>
 <li>
 2&ndash;3 years minimum experience in a mechanical design environment, ideally within conveying/logistics technology (BHS/CHS exposure is an advantage).
 </li>
 <li>
 Strong working experience in Revit (mandatory); experience in AutoCAD 2D/3D and tools such as Inventor/Navisworks is an advantage.
 </li>
 <li>
 SAP knowledge (including creating material numbers) is a plus.
 </li>
 <li>
 Strong English communication skills (written and verbal).
 </li>
 <li>
 Willingness to travel locally/internationally and work effectively in an international environment.
 </li>
 <li>
 Basic understanding of mechanical equipment safety standards (e.g., Machine Directive / EU norms).
 </li>
 <li>
 Structural calculation experience is a plus.
 </li>
 <li>
 Team-oriented, organized, eager to learn, and continuously improve.
 </li>
 </ul>
</div>

Jr. Mechanical Design & Layout Engineer

Eaton

<div>
 Dubai serves as a strategic hub for Eaton&rsquo;s Middle East operations, bringing together commercial, engineering, manufacturing, and support teams within a globally connected business environment. Building on more than 40 years in the region, Eaton recently announced the development of a new sustainable campus in Dubai, reinforcing our long‑term investment in growth, collaboration, and capability building.
 
 
 
 About Eaton
 
 
 
 Eaton is a power management company where we provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technology and services. Eaton has approximately 96,000 employees and sells products to customers in more than 175 countries.
 
 
 As a Mechanical Engineer Lead specializing in Data Centres at Eaton, you will be a key technical expert in the design, development, and application of cooling infrastructure for hyperscale and enterprise data center projects using advanced engineering principles and data-driven methodologies. You will drive innovation in thermal management strategies, ensuring the highest standards of efficiency, reliability, and scalability for our clients leveraging technical expertise and statistical analysis tool. This role involves collaboration with cross-functional teams, clients, and consultants to deliver world-class solutions from concept to commissioning.
 
 
 
 What You&rsquo;ll Do
 
 
 
 <ul>
 <li>
 Lead the design and development of innovative data center cooling solutions utilizing the full Eaton portfolio and third-party equipment through process engineering and continuous improvement techniques.
 </li>
 <li>
 Provide technical engineering leadership in mechanical design aspects, including Whitespace design, chiller plants, Air Handling Units (AHUs), Fan Wall Units, and facility water systems.
 </li>
 <li>
 Develop and implement advanced technical cooling strategies, including hot/cold aisle containment, air, liquid, and hybrid systems using validated engineering principles and continuous monitoring systems.
 </li>
 <li>
 Research, evaluate, and design solutions using emerging technologies such as direct-to-chip liquid cooling and Cooling Distribution Units (CDUs).
 </li>
 <li>
 Conduct and/or support Computational Fluid Dynamics (CFD) analysis to optimize airflow and thermal performance, ensuring PUE (Power Usage Effectiveness) targets are met or exceeded.
 </li>
 <li>
 Collaborate with Systems Engineers and Business teams to ensure technical quality in quotations, interpret customer specifications, and ensure successful project execution and handover.
 </li>
 <li>
 Act as a subject matter expert in client-facing meetings, building trusted relationships with engineering consultants, contractors, and end-users to promote Eaton solutions.
 </li>
 <li>
 Produce high-quality technical documentation, specifications, and reports, ensuring all designs comply with relevant industry standards (e.g., ASHRAE, CIBSE, OCP).
 
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s or Master&rsquo;s degree in Mechanical Engineering, Building Services Engineering, or a related field (Master's preferred).
 </li>
 <li>
 A minimum of 5&ndash;10+ years of relevant mechanical engineering experience, with at least 3-5 years specifically focused on data center or mission-critical projects.
 
 
 
 </li>
 </ul>
 
 Skills
 
 
 
 <ul>
 <li>
 Chartered Engineer status or active progression towards chartership is highly desirable.
 </li>
 <li>
 Deep technical knowledge of data center power and cooling architectures, including HVAC, chilled water systems, pumps, motors, and BMS (Building Management Systems) controls.
 </li>
 <li>
 Experience with design and simulation tools (e.g., AutoCAD, Revit, CFD tool experience highly desirable).
 </li>
 <li>
 Effective communicator and team player with a proactive approach to problem-solving.
 </li>
 <li>
 Fluent in English.
 
 
 
 </li>
 </ul>
 
 Living and Working in Dubai
 
 
 
 Dubai is an internationally connected city that offers strong professional opportunities within a truly global environment. Living and working in Dubai means being part of a diverse, forward‑looking business community, supported by modern infrastructure, excellent connectivity, and a well‑established expatriate ecosystem.
 
 
 At Eaton, employees based in Dubai are part of a stable, well‑governed organization that brings together global teams, clear ways of working, and the flexibility needed to support both performance and long‑term career development.
 
 
 We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law.
</div>

Senior Mechanical Engineer - Data Centre Segment

Codes Construction LLC

Must have minimum 3-5 years Experience in UAE as Mechanical engineer.Currently available in UAE and able to join immediately.Required Skills &amp; Expertise<ul><li>Strong knowledge of HVAC, Plumbing &amp; drainage systems, Fire Fighting and LPG.</li><li>Familiarity with HVAC &amp; Plumbing codes</li><li>Proficiency in design tools (AutoCAD, Revit MEP, HAP, etc.).</li><li>Excellent coordination and communication skills.</li><li>Familiarity with green building standards (LEED, Estidama, etc.) is a plus.</li></ul>Job Type: Full-timePay: AED8,000.00 - AED12,000.00 per monthLocation:<ul><li>Dubai (Required)</li></ul>

Sr. Mechanical Engineer

YAD Architectural Engineering Consultants

Job description:Job description:This is a full-time role for a Mechanical Design Engineer, located in Dubai, United Arab Emirates. The Mechanical Design Engineer will be responsible for designing mechanical systems, developing detailed technical drawings, performing engineering calculations, collaborating with cross-functional teams, and conducting system testing and analysis. The role also requires ensuring designs meet industry standards, client requirements, and regulatory guidelines, while keeping up-to-date with emerging technologies and trends in mechanical design.Qualifications<ul><li>At least 15 Years total UAE Experience with Minimum of 10 Years of Experience as Mechanical Design Engineer in Consultants environment</li><li>Proficiency in Mechanical Design and knowledge of CAD software such as AutoCAD, Revit, or similar tools</li><li>Bachelor&rsquo;s Degree in Mechanical Design Engineering</li><li>Must be registered in Tarkhees, DM, Society of Engineers</li><li>Candidate must have experience of working with DDA, DM, TRAKHEES, DEWA, DCD</li><li>Strong knowledge of MEP codes, standards, and regulations (UAE or relevant to project location).</li><li>Experience in handling Projects independently.</li><li>Excellent communication and coordination skills.</li><li>Ability to deliver high-quality work within project deadlines.</li></ul>SEND YOUR CV: hr@yadarchitects.com OR jobs@yadarchitects.comJob Type: Full-timePay: AED15,000.00 - AED20,000.00 per monthWork Location: In person

Mechanical Design Engineer

Explore 696+ Senior mechanical design engineer in Dubai this July. Find roles across top companies and apply now to boost your career.