senior project engineer

BTU Electromechanical Works LLC

About the CompanyBTU Electromechanical Works LLC is a Design &amp; Build MEP Contractor specializing in fit-out and building projects across Dubai. We are expanding into mid-rise developments and are looking for a capable Senior Mechanical Engineer to support the execution of a G+10 building project.Role OverviewWe are seeking a highly experienced Senior Project Engineer Mechanical with strong UAE experience in high-rise building projects. The candidate must be capable of handling the complete project cycle&mdash;from design coordination and authority approvals to execution, testing, and handover for HVAC and Plumbing systems.Key Responsibilities Design &amp; Engineering (HVAC + Plumbing)<ul><li>Heat load calculations and equipment selection</li><li>ESP calculations, duct sizing, chilled water pipe sizing</li><li>Pump head calculations and plumbing system design</li><li>Water supply, drainage, storm water &amp; fire fighting design</li><li>HVAC &amp; plumbing design coordination</li></ul>Execution, Site Coordination &amp; Authority Approvals<ul><li>Review shop drawings and as-built drawings</li><li>Material submittals and approvals</li><li>Supervise HVAC and plumbing installation works with QA/QC</li><li>Coordinate with MEP and civil teams</li><li>Manage submissions and approvals with authorities (DM, DEWA, DCD)</li><li>Handle consultant comments and ensure compliance</li></ul>Testing &amp; Commissioning<ul><li>Lead HVAC and plumbing testing &amp; commissioning</li><li>Air balancing, water balancing, and system performance checks</li><li>Ensure smooth handover and closeout</li></ul>Commercial &amp; Technical Coordination<ul><li>Review BOQ vs drawings and identify discrepancies</li><li>Support value engineering and cost optimization</li></ul>Requirements<ul><li>Bachelor&rsquo;s Degree in Mechanical Engineering</li><li>Minimum 10 years of experience (UAE mandatory)</li><li>Experience in high-rise projects (G+15 and above preferred)</li><li>Strong knowledge of HVAC &amp; Plumbing systems</li><li>Hands-on experience in design + execution + commissioning</li></ul>Software Skills<ul><li>AutoCAD (mandatory)</li><li>Revit (preferred)</li><li>HAP / Elite / similar HVAC software (advantage)</li></ul>Preferred Candidate Profile<ul><li>Experience in Design &amp; Build MEP contractors</li><li>Ability to work in a lean and fast-paced environment</li><li>Strong problem-solving and coordination skills</li><li>Capable of handling responsibilities independently</li></ul>What We Offer<ul><li>Opportunity to work on a G+10 building project</li><li>Growth into larger high-rise projects</li><li>Collaborative and performance-driven work environment</li></ul>Job Type: Full-timePay: AED14,000.00 - AED17,000.00 per monthApplication Question(s):<ul><li>Experience of working in G+15 floors Residential Buildings</li></ul>Experience:<ul><li>UAE: 10 years (Required)</li></ul>Work Location: In person

Senior Project Engineer Mechanical

China Tiesiju Civil Engineering Group Co Ltd (Dubai Branch)

Key ResponsibilitiesRequired Skills and Qualifications<ul><li>Education: Bachelor&rsquo;s degree in Engineering (Civil, Mechanical, Electrical, or related field).</li><li>Experience: 4+ years of experience in project engineering, project management, or field engineering.</li><li>Technical Knowledge: Proficiency in engineering software (e.g., CAD), project management tools (e.g., MS Project, Primavera), and industry-specific regulations.</li><li>Leadership: Strong leadership, decision-making, and communication skills to manage cross-functional teams.</li><li>Project Planning &amp; Management: Develop detailed project scopes, schedules, cost estimates, and budgets.</li><li>Technical Coordination: Work with designers, engineers, and consultants to ensure specifications meet requirements.</li><li>Implementation &amp; Supervision: Lead the installation, testing, and troubleshooting of equipment, systems, or site activities.</li><li>Compliance &amp; Safety: Ensure all project activities adhere to safety standards (e.g., OSHA, API, ASME) and environmental regulations.</li><li>Stakeholder Communication: Present progress updates, prepare reports, and manage technical queries with clients.</li><li>Quality Control: Lead QA/QC procedures, root cause analysis, and continuous improvement activities.</li><li>Mentorship: Guide junior engineers and project staff</li></ul>Job Type: Full-timeWork Location: In person

Senior Project Engineer

Naffco

<div><h2 class="jobSectionHeader">Job Summary</h2>
The Senior Project Engineer &ndash; Automotive Structures is responsible for leading the design, development, and delivery of structural components and systems for automotive applications. This role ensures that projects meet performance, safety, cost, and timeline requirements while coordinating cross-functional teams across engineering, manufacturing, and suppliers.<h2 class="jobSectionHeader">
Key Responsibilities</h2><ul><li>
Lead the design and development of automotive structural components (chassis, BIW, frames, subframes)</li><li>
Manage full project lifecycle from concept through production release</li><li>
Develop and review CAD models, drawings, and engineering documentation</li><li>
Perform structural analysis including strength, stiffness, fatigue, and durability</li><li>
Coordinate with CAE teams for simulation and validation activities</li><li>
Ensure compliance with industry standards and safety regulations</li><li>
Collaborate with manufacturing teams to ensure design for manufacturability (DFM)</li><li>
Manage project timelines, deliverables, and engineering changes</li><li>
Interface with suppliers for component development, sourcing, and validation</li><li>
Support prototype builds, testing, and issue resolution</li><li>
Drive cost optimization and weight reduction initiatives</li><li>
Mentor junior engineers and provide technical leadership</li></ul><h2 class="jobSectionHeader">
Required Skills and Competencies</h2><ul><li>
Strong knowledge of automotive structures (chassis, BIW, crash structures)</li><li>
Proficiency in CAD tools (e.g., SolidWorks, CATIA, NX)</li><li>
Experience with CAE tools (e.g., Abaqus, ANSYS, HyperMesh)</li><li>
Understanding of materials (steel, aluminum, composites) and joining methods</li><li>
Knowledge of GD&amp;T and engineering drawing standards</li><li>
Strong project management and problem-solving skills</li><li>
Experience with DFMEA, PFMEA, and design validation processes</li><li>
Familiarity with automotive regulations and safety standards</li><li>
Excellent communication and cross-functional collaboration skills</li></ul><h2 class="jobSectionHeader">
Qualifications</h2><ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering, Automotive Engineering, or related field</li><li>
6&ndash;12 years of experience in automotive structural design and development</li><li>
Proven experience leading engineering projects</li><li>
Experience in OEM or Tier-1 automotive companies preferred</li></ul></div>

Senior Project Engineer - Automotive Structures

Pavico Aluminium & Metals

Key Responsibilities<ul><li>Prepare and review structural steel design calculations and connection details.</li><li>Develop and check shop drawings, GA drawings, and fabrication drawings.</li><li>Coordinate with architects, consultants, contractors, and project teams.</li><li>Review material submittals, method statements, and technical documents.</li><li>Ensure compliance with international standards and project specifications.</li><li>Provide technical support during fabrication and erection stages.</li><li>Supervise steel installation activities at site when required.</li><li>Resolve technical issues and design conflicts efficiently.</li><li>Monitor project progress and ensure quality control requirements are achieved.</li><li>Lead and guide junior engineers, draftsmen, and technicians.</li><li>Participate in project planning, scheduling, and coordination meetings.</li></ul>Required Skills &amp; Competencies<ul><li>Strong knowledge of structural steel systems and connection design.</li><li>Experience with AutoCAD, Tekla Structures, or similar CAD software.</li><li>Familiarity with steel fabrication processes and erection techniques.</li><li>Ability to interpret engineering drawings and specifications.</li><li>Excellent coordination and communication skills.</li><li>Strong problem-solving and decision-making ability.</li></ul>Job Type: Full-timeWork Location: In person

Senior Project Engineer (STEEL)

MAB Information Technology LLC

Job Summary:We are seeking a highly skilled and PMP-certified Senior Project Engineer to manage and deliver ELV (Extra Low Voltage) projects, including CCTV, Access Control, Structured Cabling, Gate Barriers, AV Systems, and other security systems. The candidate will be responsible for end-to-end project execution, ensuring delivery within scope, time, cost, and quality standards.Key Responsibilities:<ul><li>Lead and manage ELV projects from initiation to completion.</li><li>Plan, execute, monitor, and control project activities in line with PMP methodologies.</li><li>Coordinate with clients, consultants, subcontractors, and internal teams.</li><li>Prepare project schedules, resource plans, and budgets.</li><li>Ensure timely procurement of materials and equipment.</li><li>Supervise installation, testing, commissioning, and handover processes.</li><li>Review technical drawings, BOQs, and specifications.</li><li>Ensure compliance with project specifications, safety standards, and local regulations.</li><li>Conduct regular site meetings and provide progress reports.</li><li>Identify risks and implement mitigation strategies.</li><li>Manage variations, claims, and project documentation.</li><li>Ensure proper project documentation.</li></ul>Qualifications &amp; Requirements:<ul><li>Bachelor&rsquo;s Degree in Electrical / Electronics / Communication Engineering or equivalent.</li><li>PMP Certification (mandatory).</li><li>Minimum 5&ndash;8 years of experience in ELV project execution (UAE/GCC preferred).</li><li>Strong knowledge of ELV systems such as:</li><li>CCTV &amp; Video Surveillance</li><li>Access Control &amp; Time Attendance</li><li>Structured Cabling Systems</li><li>Gate Barriers &amp; Intercom Systems</li><li>Proficiency in project management tools (MS Project or equivalent).</li><li>Good knowledge of AutoCAD and ELV system design.</li><li>Strong leadership, communication, and coordination skills.</li><li>Ability to manage multiple projects simultaneously.</li></ul>Preferred Skills:<ul><li>Experience with authority approvals (e.g., Dubai Police, SIRA, etc.)</li><li>Knowledge of international standards and best practices in ELV systems</li><li>Valid UAE Driving License</li></ul>Job Type: Full-timePay: AED6,000.00 - AED8,000.00 per monthWork Location: In person

Senior Project Engineer – ELV Projects (PMP Certified)

McDermott

<div>Job Overview:
The Senior Principal Piping Engineer is tasked with solving unique and complex problems that broadly impact the business. They must proactively identify and solve the most complex problems that impact the management and direction of the business. The Senior Principal Piping Engineer is considered a specialist in the field of piping engineering, and they offer a broad base of knowledge about the engineering function. The Senior Principal Piping Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional policies and industry guidelines. The Senior Principal Piping Engineer role requires conceptual and innovative thinking to develop creative solutions to piping engineering challenges.</div>
 <div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
 <div>Key Tasks and Responsibilities:
<ul><li>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
</li><li>Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
</li><li>Apply expertise to the most complex problems
</li><li>Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
</li><li>Develop and manage plans to achieve business objectives
</li><li>Clearly communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes
</li><li>When acting as Lead Engineer, in addition:
<ul><li>Direct large Engineering team as a Lead Engineer on most unique and complex projects
</li><li>Lead the Discipline engineering design of the assigned work area and completed within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
</li><li>Plan, organize, and direct all aspects of Discipline execution on the assigned project, including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager
</li><li>Ensure interfaces and deliverables are clearly identified
</li><li>Maintain responsibility for progress and productivity, identifying any required corrective action
</li><li>Act as project representative for the discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc
</li></ul></li><li>Train/mentor other employees in the department
</li><li>Assist and monitor MOPEX offices on projects
</li><li>Have a good understanding of the other engineering departments
</li><li>Have a good understanding of construction/fabrication yard and client requirements
</li><li>Have commercial insight
</li><li>Help to maintain Unify
</li><li>Supervise engineers and designers
</li><li>Define scopes of work for engineering/ construction fabrication yard
</li><li>Provide engineering support as required
</li><li>Prepare specifications
</li><li>Prepare technical part of Piping subcontracts
</li><li>Review of vendor data
</li><li>Prepare technical bid evaluations
</li><li>Assist in furthering the department
</li><li>Tasks as Engineering Specialist:
<ul><li>Specify materials for all piping components in accordance with process and project requirements
</li><li>Supply relevant disciplines with preliminary information
</li><li>Write and handle piping requisitions in accordance with project requirements
</li><li>Make evaluations of incoming bids from sellers and check same for completeness of scope and compliance with specification
</li><li>Check all seller documents for completeness and compliance to the purchase order requisition
</li><li>Prepare input and run reports for the computerized piping material management systems
</li><li>Lead and supervise all MTO &amp; Control Engineers, ensuring high-quality MTOs and sound material quantity control on all projects
</li><li>Is responsible for all piping material take-off and quantity control activities, including checking and reporting
</li><li>Ensure a Piping Material Take-Off Planning Form is prepared and approved prior to the MTO activities on a project and an MTO Close-Out Report upon completion of the bulk MTO
</li><li>Prepare all types of Material Control reports, analyze all piping material quantity developments, and report findings to Project Management
</li><li>Provide advanced pipe stress calculations of critical systems, cooperate with Plant design on necessary modifications
</li><li>Design adequate pipe supports
</li><li>Communicate with the Civil/Structural department on Pipe-supporting structures
</li><li>Prepare and handle pipe support requisitions in accordance with project requirements
</li><li>Establish and maintain interfaces with other disciplines
</li><li>Make calculations on the computer/by hand
</li><li>Execute all relevant administration
</li></ul></li><li>Tasks as Lead Engineer:
<ul><li>Work as Lead Engineer for most large-size, unique, and complex EPC projects
</li><li>Coach potential lead engineers
</li><li>Have full responsibility for all engineering and design work on any project
</li><li>Have full control and manage work hours, materials, progress
</li><li>Explain and consider plans to Engineers, project management, and client
</li><li>Recommend best practices for the execution/improvement of the project
</li><li>Work in close liaison with the Design Coordinator, area leads, etc
</li><li>Have extensive MOPEX experience
</li><li>Proactively manage change and clearly convey how change will impact team, project, and business
</li><li>Assist Project Manager in:
<ul><li>Preparing deliverable control
</li><li>Preparing schedule
</li><li>Preparing progress reports
</li><li>Preparing man-hour and capital expenditure estimates
</li></ul></li><li>Coordinate with project management
</li><li>Train personnel under their supervision
</li><li>Is responsible for discipline within the engineering group
</li><li>Identify and manage changes in the scope of work
</li><li>Is responsible for filing of engineering work
</li><li>Give relevant feedback to the department
</li><li>Have a broad view of the market and industry policies and developments
</li><li>Use technology, design, and innovation
 </li></ul></li></ul>Reports to:
 
Project: Lead Engineer, Project Engineering Manager or Project Manager
 
Functional: Supervising Department Manager
 
Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Project Management Team, Document Control,
 
Project Planner, Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors and Vendors, and
 
Customers
 
Supervises: Senior Engineers, Engineers and Designers</div>
 <div>Essential Qualifications and Education:
<ul><li>Bachelor's Degree or Master's Degree in Engineering
</li><li>20+ years of experience in oil and gas with a major contractor or consultant predominantly performing detail design
</li><li>Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable
</li><li>Knowledgeable in project coordination and execution skills
</li><li>Recognized across the company as a key lead, highly innovative designer, or highly skilled analyst
</li><li>Preferably Registered Professional Engineer or member of professional engineering society as applicable
</li><li>Seasoned knowledge of engineering standards and specifications
</li><li>Good knowledge of engineering software
</li><li>Able to work independently
</li><li>Good working knowledge of English, both oral and written
</li><li>HSE, TQM and cost-conscious
</li><li>Good technical, and structural knowledge
</li><li>Good organizer, motivator, and supervisor
</li><li>Keen on improving the effectiveness of the work
</li><li>Show flexibility and ensure proper hand-over with regards to:
<ul><li>The reassignment to other departments/construction sites/fabrication yards
</li><li>The replacement of colleagues during illness and holidays
</li><li>The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
</li><li>The managing/learning of current working methods and software applications
</li><li>The reassignment to other McDermott offices
</li></ul></li></ul>#LI-MW2</div>

Senior Principal Piping Engineer

<div>Job Overview:
The Senior Principal HSE Engineer is tasked with solving unique and complex problems that have a broad impact on the business. They must proactively identify and solve the most complex problems that impact the management and direction of the business. The Senior Principal HSE Engineer is considered a specialist in the field of HSE Engineering, and they offer a broad base of knowledge about the Engineering function. The Senior Principal HSE Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional policies and industry guidelines. The Senior Principal HSE Engineer role requires conceptual and innovative thinking to develop creative solutions to HSE Engineering challenges.</div>
 <div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
 <div>Key Tasks and Responsibilities:
<ul><li>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
</li><li>Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise
</li><li>Apply expertise to the most complex problems
</li><li>Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
</li><li>Develop and manage plans to achieve business objectives
</li><li>Communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes
</li><li>When acting as Lead Engineer, in addition:
<ul><li>Direct large Engineering team as a Lead Engineer on most unique and complex projects
</li><li>Lead the Discipline engineering design of the assigned work area and completed it within the planned schedule and budget, by standards, MDR, and project-specific procedures and to a high professional standard
</li><li>Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager
</li><li>Ensure interfaces and deliverables are identified
</li><li>Maintain responsibility for progress and productivity, identifying any required corrective action
</li><li>Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc.
</li></ul></li><li>Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
</li><li>Interpret contractual requirements as they relate to engineering execution
</li><li>Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates; provide similar support for Variation Orders
</li><li>Interface with other departments to obtain input for Discipline designs and drawings, and to develop clash-free designs
</li><li>Maintain close coordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required
</li><li>Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager
</li><li>Prepare estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates, identifying software requirements and any other project-specific requirements
</li><li>Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
</li><li>Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications
</li><li>Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
</li><li>Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope
</li><li>Attend project kickoff and review meetings, vendor meetings, and engineering meetings as required
</li><li>Provide Technical direction and review of designers producing products related to Fire Protection &amp; Safety Engineering
</li><li>Prepare, review, and (as Lead Engineer) approve design reports and procedures
</li><li>Assist procurement personnel in procuring Discipline equipment, materials, and services; ensuring that work produced complies with Customer objectives and procedures; procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations, preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
</li><li>Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary
</li><li>Review and (as Lead Engineer) approve design verification through single-discipline check/ interdisciplinary check (IDC)
</li><li>Provide technical support to fabrication and construction queries, including identifying defect/ rectification requirements
</li><li>Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary, and manpower related
</li><li>Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity
</li><li>Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved
</li><li>Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements
</li><li>Perform (as required) Technical Quality Audit reviews by MDR Global Procedures
</li><li>Assist Lead Engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
</li><li>Capture lessons learned and entered them into MDR's Lessons Learned system
</li><li>Provide leadership, mentoring, and guidance to other Engineers
</li><li>Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables
</li><li>Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities
</li><li>Monitor costs of own work processes
</li><li>Evaluate costs associated with products and solutions
</li><li>Assist in the maintenance of departmental technical guidelines and standard calculation notes
</li><li>Participate in the development and maintenance of Global Procedures, Software, and Standards
</li><li>Incorporate approved Lessons Learned into MDR Level 2 &amp; 3 engineering procedures, as applicable
</li><li>Participate in standards development committees or task groups such as API
</li><li>Assist Department Manager in identifying departmental needs including the development of personnel and technical capabilities
</li><li>Participate in McDermott forums and represent McDermott as a subject matter expert (SME)
</li><li>Provide information on employee performance to the Discipline Manager
</li><li>Assist the Discipline manager in interviewing job applicants
</li><li>Review, and (as Lead Engineer) approve the following:
<ul><li>Design HSE &amp; fire protection philosophies
</li><li>Safety study scope of work specifications, requisitions, TBE reports
</li><li>Safety equipment lists
</li><li>Firefighting equipment specifications and data sheets
</li><li>Lifesaving and personnel safety equipment specifications and data sheets
</li><li>Safety sign specifications and data sheets
</li><li>Firewater demand and hydraulic calculation reports using PIPENET or equivalent software
</li><li>Inputs to P&amp;ID markups for Firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, and deluge valves /nozzles
</li><li>Escape route and safety equipment layouts
</li><li>Safety sign layouts
</li><li>Third-party safety study reports that comply with project specifications
</li></ul></li><li>Participate and (as Lead Engineer) coordinate safety workshops (such as HAZID/HAZOP)
</li><li>Review and (as Lead Engineer) approve safety study close-out reports
</li><li>Review and (as Lead Engineer) approve FP&amp;S and relevant other disciplines' vendor data
</li><li>Review and (as Lead Engineer) approve technical notes on PFP rating requirements for the project based on Safety Study recommendations
</li><li>Review and (as Lead Engineer) approve inputs for FP&amp;S layouts, fire, and gas detection layouts, and cause and effect matrices
</li><li>Prepare, review, and (as Lead Engineer) approve safety study action monitoring system and SEAMS register
</li><li>Participate in 3D model reviews as necessary
</li><li>When acting as Lead Engineer, in addition:
<ul><li>Act as project-based discipline focal point of contact in communications and meetings with Customer counterparts
</li><li>Ensure substantive communications are documented
</li><li>Prepare bids and projects discipline engineering budget and execution plans, updating as required
</li><li>Identify project staff needs based on knowledge of individual engineers&rsquo; skill sets and provide requests to the Discipline manager
</li><li>Plan, organize, and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets
</li><li>Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan
</li><li>Prepare working forecasts identifying change management plans, corrective action, and real-time schedule
</li><li>Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity
</li><li>Alert the project team, if any deviation from the scope or a need for a change order
</li><li>Review and approve requisitions, technical quotation evaluations and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required
</li><li>Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews
</li><li>Review comments from Customers &amp; other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation
</li><li>Assist the Discipline manager in the preparation of quarterly forecasts and manpower planning
</li><li>Anticipate project engineering needs and plan accordingly
</li><li>Coordinate with vendor for discipline-managed/procured items
</li><li>Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members
 </li></ul></li></ul>Reports to Project: Lead Engineer, Project Engineering Manager or Project Manager, Function: Supervising Department
 
Manager
 
Liaise with: All Engineering disciplines, Fabrication Group, Safety Dept, Project Management Team, Document Control,
 
Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors and Vendors, and
 
Customers
 
Supervises: Senior Engineers and Engineers</div>
 <div>Essential Qualifications and Education:
<ul><li>Bachelor&rsquo;s Degree or Master&rsquo;s Degree in Engineering
</li><li>20+ years of experience in oil and gas with major contractors or consultants predominantly performing detail design
</li><li>Preferably Registered Professional Engineer or member of professional engineering society as applicable
</li><li>Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable to offshore
</li><li>Knowledgeable in project coordination and execution skills
</li><li>Recognized across the company as a key leader, highly innovative designer, or highly skilled analyst
</li><li>Recognized as having good communication and presentation skills (e.g., published technical papers are written, actively participates in conferences and/or seminars, and/or is a capable presenter of design solutions or topics at &quot;lunch and learns&quot;; etc.)
</li></ul>#LI-MW2</div>

Senior Principal HSE Engineer (Technical Safety)

Explore 1665+ Senior project engineer in Dubai this April. Find roles across top companies and apply now to boost your career.